FORM PER-2 Sample Clauses

FORM PER-2. Resume and Declaration - Contractor's Representative and Key Personnel. Summarize professional experience in reverse chronological order. Indicate particular technical and managerial experience relevant to the project. Name of Tenderer Position [#1]: [title of position from Form PER-1] Personnel information Name: Date of birth: Address: E-mail: Professional qualifications: Academic qualifications: Language proficiency: [language and levels of speaking, reading and writing skills] Details Address of Procuring Entity: Telephone: Contact (manager / personnel officer): Fax: Job title: Years with present Procuring Entity: Summarize professional experience in reverse chronological order. Indicate particular technical and managerial experience relevant to the project. Project Role Duration of involvement Relevant experience [main project details] [role and responsibilities on the project] [time in role] [describe the experience relevant to this position] Declaration‌ I, the undersigned [insert either “Contractor's Representative” or “Key Personnel” as applicable], certify that to the best of my knowledge and belief, the information contained in this Form PER-2 correctly describes myself, my qualifications and my experience. I confirm that I am available as certified in the following table and throughout the expected time schedule for this position as provided in the Tender: Commitment Details Commitment to duration of contract: [insert period (start and end dates) for which this Contractor’s Representative or Key Personnel is available to work on this contract] Time commitment: [insert period (start and end dates) for which this Contractor’s Representative or Key Personnel is available to work on this contract] I understand that any misrepresentation or omission in this Form may:
AutoNDA by SimpleDocs

Related to FORM PER-2

  • CFR PART 200 Domestic Preferences for Procurements As appropriate and to the extent consistent with law, the non-Federal entity should, to the greatest extent practicable under a Federal award, provide a preference for the purchase, acquisition, or use of goods, products, or materials produced in the United States (including but not limited to iron, aluminum, steel, cement, and other manufactured products). The requirements of this section must be included in all subawards including all contracts and purchase orders for work or products under this award. For purposes of 2 CFR Part 200.322, “Produced in the United States” means, for iron and steel products, that all manufacturing processes, from the initial melting stag through the application of coatings, occurred in the United States. Moreover, for purposes of 2 CFR Part 200.322, “Manufactured products” means items and construction materials composed in whole or in part of non-ferrous metals such as aluminum, plastics and polymer-based products such as polyvinyl chloride pipe, aggregates such as concrete, class, including optical fiber, and lumber. Pursuant to the above, when federal funds are expended by ESC Region 8 and TIPS Members, Vendor certifies that to the greatest extent practicable Vendor will provide a preference for the purchase, acquisition, or use of goods, products, or materials produced in the United States (including but not limited to iron, aluminum, steel, cement, and other manufactured products). Does vendor agree? Yes

  • 200 Domestic Preferences for Procurements As appropriate and to the extent consistent with law, the non-Federal entity should, to the greatest extent practicable under a Federal award, provide a preference for the purchase, acquisition, or use of goods, products, or materials produced in the United States (including but not limited to iron, aluminum, steel, cement, and other manufactured products). The requirements of this section must be included in all subawards including all contracts and purchase orders for work or products under this award. For purposes of 2 CFR Part 200.322, “Produced in the United States” means, for iron and steel products, that all manufacturing processes, from the initial melting stag through the application of coatings, occurred in the United States. Moreover, for purposes of 2 CFR Part 200.322, “Manufactured products” means items and construction materials composed in whole or in part of non-ferrous metals such as aluminum, plastics and polymer-based products such as polyvinyl chloride pipe, aggregates such as concrete, glass, including optical fiber, and lumber. Pursuant to the above, when federal funds are expended by ESC Region 8 and TIPS Members, Vendor certifies that to the greatest extent practicable Vendor will provide a preference for the purchase, acquisition, or use of goods, products, or materials produced in the United States (including but not limited to iron, aluminum, steel, cement, and other manufactured products). Does vendor agree? Yes

  • Quarterly Financial Reports The School shall prepare and submit quarterly financial reports to the Commission within 45 days of the end of each fiscal year quarter.

  • Special Permit from Relevant Ministerial/ Government Agencies and Foreign Capital Ownership Limitation Raw Material for Explosives (Ammonium Nitrate) with maximum foreign equity ownership of 49% and a special permit from the Minister of Defense (ISIC 2411) Industry of explosive materials and its components for industry need with maximum foreign equity ownership of 49% and a special permit from the Minister of Defense (ISIC 2429) Sugar Industry (Xxxxx Xxxxxxx Sugar, Refined Crystal Sugar and Raw Crystal Sugar) with maximum foreign equity ownership of 95% and a special permit from the Minister of Industry and the Minister of Agriculture, and it has to be integrated with the sugar plantation. The manufacturing of raw crystal sugar is required for any sugar manufacturer with sugarcane input capacity exceeding 8000 tons per day (ISIC 1542) Processing of plantation product industry (similar capacity or exceeding a certain capacity, according to Regulation of Minister of Agriculture Number 26 of 2007 with maximum foreign capital ownership of 95% with a special permit from Minister of Agriculture. - Fiber and Seed Cotton Industry (ISIC1514, 1711) - Crude oil industry (edible oil) from vegetable and animal, coconut oil industry, palm oil industry, rubber to be sheet, thick latex, crumb rubber industry, raw castor oil industry, sugar, sugar cane and sugar cane residue industry, black tea/green tea industry, dry tobacco leaves industry, Copra, Fiber, Coconut Charcoal, Dust, Nata de coco industry, Coffee sorting, cleaning and peeling industry, Cocoa cleaning, peeling and drying industry, cleaning and peeling seed other than coffee and cacao industry, cashew to be dry seed cashew and Cashew Nut Shell Liquid (CNSL) Industry, Peppercorn to be dry white pepper and dry black pepper industry (ISIC 1514, 2429, 1542, 1549, 1600, 2519, 1531)

  • DOMESTIC PREFERENCES FOR PROCUREMENTS To the extent applicable, Supplier certifies that during the term of this Contract will comply with applicable requirements of 2 C.F.R. § 200.322.

  • Please see the current Washtenaw Community College catalog for up-to-date program requirements Secondary / Post-Secondary Program Alignment Welding HIGH SCHOOL COURSE SEQUENCE 9th Grade 10th Grade 11th Grade 12th Grade English 9 Algebra I World History/Geography Biology World Language Phys Ed/Health English 10 Geometry U.S. History/Geography Physics or Chemistry World Language Visual/Performing/Applied Arts English 11 Algebra II Civics/Economics Welding English 12 Math Credit Science Credit Welding WASHTENAW COMMUNITY COLLEGE Welding Associate in Applied Science Semester 1 Math Elective(s)* 3 WAF 105 Introduction to Welding Processes 2 WAF 111 Oxy-fuel Welding 4 WAF 112 Shielded Metal Arc Welding 4 Semester Total 13 Semester 2 Speech Elective(s) 3 WAF 106 Blueprint Reading for Welders 3 WAF 123 Advanced Oxy-fuel Welding 4 WAF 124 Advanced Shielded Metal Arc Welding 4 Semester Total 14 Semester 3 Arts/Human. Elective(s) 3 Computer Lit. Elective(s) 3 WAF 215 Advanced Gas Tungsten Arc Welding 4 WAF 288 Gas Metal Arc Welding 4 Semester Total 14 Semester 4 WAF 200 Layout Theory Welding 3 WAF 210 Welding Metallurgy 3 Soc. Sci. Elective(s) 3 WAF 226 Specialized Welding Procedures 4 Semester Total 13 Semester 5 Nat. Sci. Elective(s) 4 WAF 227 Basic Fabrication 3 WAF 229 Shape Cutting Operations 3 Writing Elective(s) 3 Semester Total 13 Program Totals 67

  • Annual Reports As soon as practicable, and in any event within ninety (90) days after the end of each fiscal year, (i) the consolidated balance sheet of the Company and its Subsidiaries as at the end of such fiscal year and the related consolidated statements of income, stockholders’ equity and cash flows of the Company and its Subsidiaries for such fiscal year, and in comparative form the corresponding figures for the previous fiscal year along with consolidating schedules in form and substance sufficient to calculate the financial covenants set forth in Section 7.18 and (ii) an audit report on the consolidated financial statements (but not the consolidating financial statements or schedules) listed in clause (i) hereof of independent certified public accountants of recognized national standing, which audit report shall be unqualified and shall state that such financial statements fairly present the consolidated financial position of the Company and its Subsidiaries as at the dates indicated and the results of their operations and cash flows for the periods indicated in conformity with Agreement Accounting Principles and that the examination by such accountants in connection with such consolidated financial statements has been made in accordance with generally accepted auditing standards. The deliveries made pursuant to this clause (ii) shall be accompanied by (x) any management letter prepared by the above-referenced accountants, and (y) a certificate of such accountants that, in the course of their examination necessary for their certification of the foregoing, they have obtained no knowledge of any Default or Event of Default, or if, in the opinion of such accountants, any Default or Event of Default shall exist, stating the nature and status thereof.

  • 372/2011 Sb o zdravotních službách a podmínkách jejich poskytování (zákon o zdravotních službách), pojištěno pro případ odpovědnosti za škodu způsobenou v souvislosti s poskytováním zdravotních služeb a že si je vědomo své povinnosti zajistit trvání tohoto pojištění po celou dobu poskytování zdravotních služeb. Příslušná pojistná smlouva je uzavřena v rozsahu požadovaném právními předpisy a neobsahuje pojištění odpovědnosti za škodu způsobenou při provádění klinického hodnocení nebo v souvislosti s ním ani nezajišťuje odškodnění v případě smrti subjektu hodnocení nebo v případě škody vzniklé na zdraví subjektu hodnocení v důsledku provádění klinického hodnocení.

  • OMB 2 CFR Part 200 Except for agreements that are straight hourly rate or fee for services contracts not built on a submitted Budget, all components of payment billed to COUNTY will be calculated in accordance with the Office of Management and Budget (OMB) 2 CFR Part 200.

  • Annual Report Within 90 days after each April 15, starting in the year after the Closing Date, the Indenture Trustee will prepare and mail to each Noteholder a report dated as of April 15 of the applicable year that complies with Section 313(a) of the TIA, if the report is required under Section 313(a) of the TIA. The Indenture Trustee will also prepare and mail to the Noteholders any report required under Section 313(b) of the TIA. A report mailed to the Noteholders under this Section 7.4(a) will be mailed according to Section 313(c) of the TIA.

Time is Money Join Law Insider Premium to draft better contracts faster.