Fixture Installation Sample Clauses

Fixture Installation. During the construction of the Tenant Improvements and prior to the Commencement Date, as defined in the Work Letter, the County may install fixtures, telephones, alarm systems, and other items required to prepare the Premises for County□ s occupancy and store furniture, supplies and equipment on the Premises, provided such work and storage can be effected without unduly interfering with Lessor□ s completion of the Tenant Improvements, final building inspection, and receipt of an occupancy permit. Such work and storage does not commence the Term of the Lease.
View Source
Fixture Installation. .1 Connect fixtures, complete with supplies and drains, separately trapped, supporting level and square. .2 Each fixture must have valve and air ▇▇▇▇▇▇▇▇ on supplies. .3 Hot water faucets must be on left. .4 Mixing faucets: mixing faucets and thermostatic controlled mixing valves to have check valves on supplies. .5 Fixtures on outside walls to have supplies from floor; other fixtures to be served from wall. .6 Exposed piping, valves, and metal to fixtures: Chrome plated IPS and with plated escutcheons. .7 Provide supports required to set fixtures level and square. .8 Mount fixtures so that 100 kg (82 lb). weight will not loosen or distort mounting. .9 Fasten fixtures on walls or partitions with 12mm (1/2”) nominal carriage bolts passing through wall to 3mm (1/8”) thick steel plates, recessed where required, on other side of wall, unless chair carriers are specified. .10 Fixtures mounted on glazed tile surfaces shall have ground faces to finished surfaces. .11 Fixtures shall be serviced as follows: Lavatory 32 mm (1- 1/4”) 32 mm (1- 1/4”) 12 mm (1/2”) 12 mm (1/2”) Sinks 38 mm (1- 1/2”) 32 mm (1- 1/4”) 12 mm (1/2”) 12 mm (1/2”) Drinking Fountain 32 mm (1- 1/4”) 32 mm (1- 1/4”) 12 mm (1/2”) ------ Water Closet (Flush Valve) 75 mm (3”) 38 mm (1- 1/2”) 25 mm (1”) ------ Urinal (Flush Valve) 50 mm (2”) 38 mm (1- 1/2”) 19 mm (3/4”) ------ Service Sink 75 mm (3”) 38 mm (1- 1/2”) 12 mm (1/2”) 12 mm (1/2”) Flush Valves 50 mm (2”) 32 mm (1- 1/4”) 12 mm (1/2”) 12 mm (1/2”) Floor Drain 75 mm (3”) 32 mm (1- 1/4”) ------ ------ Floor Drain (Slab on Grade) 75 mm (3”) 32 mm (1- 1/4”) ------ ------ .12 Floor drains shall be individually vented and individually trap primed.
View Source

Related to Fixture Installation

  • Software Installation The AGENCY shall request approval in writing from the COUNTY prior to installation of any software on COUNTY computer equipment. All software installations must be supervised by COUNTY technical support staff and proof of licensing is required. Upon completion, the AGENCY is responsible for reconfiguring the computers back to the original state.

  • Equipment Installation In order to meet its obligations under this Agreement, a Party that owns, rents, or leases equipment (the equipment owner) may require installation of such equipment on property owned by another Party (the property owner), provided that the property is being used for an electric utility purpose and that the property owner shall not be required to do so if it would thereby be prevented from performing its own obligations or exercising its rights under this Agreement.

  • Utility Installations Trade Fixtures Alterations 8.3.1 The term “Utility Installations” refers to all floor and window coverings, air and/or vacuum lines, power panels, electrical distribution, security and fire protection systems, communication cabling, lighting fixtures, HVAC equipment, plumbing, and fencing in or on the Premises. The term “Trade Fixtures” shall mean Lessee’s machinery and equipment that can be removed without doing material damage to the Premises. The term “Alterations” shall mean any modification of the improvements, other than Utility Installations or Trade Fixtures, whether by addition or deletion. “Lessee Owned Alterations and/or Utility Installations” are defined as Alterations and/or Utility Installations made by Lessee that are not yet owned by Lessor pursuant to Section 8.4.1.

  • Maintenance Repairs Utility Installations Trade Fixtures and Alterations (a) Subject to the provisions of Paragraphs 2.2 (Lessor’s warranty as to condition), 2.3 (Lessor’s warranty as to compliance with covenants, etc.), 7.2 (Lessor’s obligations to repair), 9 (damage and destruction), and 14 (condemnation), Lessee shall, at Lessee’s sole cost and expense and at all times, keep the Premises and every part thereof in good order, condition and repair, structural and non-structural (whether or not such portion of the Premises requiring repair, or the means of repairing the same, are reasonably or readily accessible to Lessee, and whether or not the need for such repairs occurs as a result of Lessee’s use, any prior use, the elements or the age of such portion of the Premises), including, without limiting the generality of the foregoing all equipment or facilities serving the Premises, such as plumbing, heating, air conditioning, ventilating, electrical, lighting facilities, boilers, fired or unfired pressure vessels, fire sprinkler and/or standpipe and hose or other automatic fire extinguishing system, including fire alarm and/or smoke detection systems and equipment, fire hydrants, fixtures, walls (interior and exterior), foundations, ceilings, roofs, floors, windows, doors, plate glass, skylights, landscaping, driveways, parking lots, fences, retaining walls, signs, sidewalks and parkways located in, on, about, or adjacent to the Premises. Lessee shall not cause or permit any Hazardous Substance to be spilled or released in, on, under or about the Premises (including through the plumbing or sanitary sewer system) and shall promptly, at Lessee’s expense, take all investigatory and/ore remedial action reasonably recommended, whether or not formally ordered or required, for the cleanup of any contamination of, and for the maintenance, security and/or monitoring of, the Premises, the elements surrounding same, or neighboring properties that was caused or materially contributed to by Lessee, or pertaining to or involving any Hazardous Substance and/or storage tank brought onto the premises by or for lessee or under its control. Lessee, in keeping the Premises in good order, condition and repair, shall exercise and perform good maintenance practices. Lessee’s obligations shall include restorations, replacements or renewals when necessary to keep the Promises and all improvements thereon or a part thereof in good order, condition and state of repair. If Lessee occupies the Premises for seven (7) years or more, lessor may require Lessee to repaint the exterior of the buildings on the Premises as reasonably required, but not more frequently than once every seven (7) years. (b) Lessee shall, at Lessee’s sole cost and expense, procure and maintain contracts, with copies to Lessor, in customary form and substance for, and with contractors specializing and experienced in, the inspection, maintenance and service of the following equipment and improvements, if any, located on the Premises: (i) heating, air conditioning and ventilation equipment, (ii) boiler, fired or unfired pressure vessels, (iii) fire sprinkler and/or standpipe and hose or other automatic fire extinguishing systems, including fire alarm and/or smoke detection. (iv) landscaping and irrigation systems, (v) roof covering and drain maintenance and (vi) asphalt and parking lot maintenance.

  • Installations Any special carpentry, wiring, electrical or other work, gas, steam, water and drainage connection shall be installed at Exhibitor’s expense, and in accordance with the building and Management’s direction.