Common use of FCC Requirements Clause in Contracts

FCC Requirements. (a) In order to use the FCC/IC grant, the OEM must not operate or configure the module in such a way that the module will transmit more than 2 seconds telegrams per hour. (b) End users of products which contain the module must not have the ability to alter the firmware that governs the operation of the module. The agency grant is valid only when the module is incorporated into a final product by OEM integrators. EnOcean GmbH ▇▇▇▇▇▇▇▇▇▇▇ ▇▇▇ ▇▇▇▇▇ ▇▇▇▇▇▇▇▇▇▇▇ ▇▇▇▇▇▇▇ Phone +49.89.67 34 689-0 Fax +49.89.67 ▇▇ ▇▇▇-▇▇ ▇▇▇▇@▇▇▇▇▇▇▇.▇▇▇ ▇▇▇.▇▇▇▇▇▇▇.▇▇▇ Management: ▇▇▇▇▇▇ ▇▇▇▇▇▇▇, ▇▇▇ ▇▇▇▇▇ Registered Court Munich HRB 139781 VAT Reg No. DE813355588 Account: HypoVereinsbank München No. 2440610 Bank Code 700 202 70 (c) The end-user must not be provided with instructions to remove, adjust or install the module. The OEM must instruct the end user not to do so by providing appropriate written documentation (d) FCC labeling requirements: The Original Equipment Manufacturer (OEM) must ensure that FCC labeling requirements are met. This includes a clearly visible label on the outside of the final product. Attaching a label to a removable portion of the final product, such as a battery cover, is not permitted. The label must include the following text: The writing on the label must appear exactly as shown. Do not add spaces or put the text on multiple lines. Any additional text needed on the label may appear on different lines. The user manual for the end product must also contain the text given above. (e) Changes or modifications not expressly approved by EnOcean could void the user's authority to operate the equipment. (f) The module must be used with only the following approved antenna(s). N.A. Wire/Monopole 1.0 dBi

FCC Requirements. (a) In order to use the FCC/IC grant, the OEM must not operate or configure the module in such a way that the module will transmit more than 2 seconds telegrams per hour. (b) End users of products which contain the module must not have the ability to alter the firmware that governs the operation of the module. The agency grant is valid only when the module is incorporated into a final product by OEM integrators. EnOcean GmbH ▇▇▇▇▇▇▇▇▇▇▇ ▇▇▇ ▇▇▇▇▇ ▇▇▇▇▇▇▇▇▇▇▇ ▇▇▇▇▇▇▇ Phone +49.89.67 34 689-0 Fax +49.89.67 ▇▇ ▇▇▇-▇▇ ▇▇▇▇@▇▇▇▇▇▇▇.▇▇▇ ▇▇▇.▇▇▇▇▇▇▇.▇▇▇ Management: ▇▇▇▇▇▇ ▇▇▇▇▇▇▇, ▇▇▇ ▇▇▇▇▇ Registered Court Munich HRB 139781 VAT Reg No. DE813355588 Account: HypoVereinsbank München No. 2440610 Bank Code 700 202 70 (c) The end-user must not be provided with instructions to remove, adjust or install the module. The OEM must instruct the end user not to do so by providing appropriate written documentation (d) FCC labeling requirements: The Original Equipment Manufacturer (OEM) must ensure that FCC labeling requirements are met. This includes a clearly visible label on the outside of the final product. Attaching a label to a removable portion of the final product, such as a battery cover, is not permitted. The label must include the following text: The writing on the label must appear exactly as shown. Do not add spaces or put the text on multiple lines. Any additional text needed on the label may appear on different lines. The user manual for the end product must also contain the text given above. (e) Changes or modifications not expressly approved by EnOcean could void the user's authority to operate the equipment. (f) The module must be used with only the following approved antenna(s). N.A. Wire/Monopole 1.0 Helical antenna -9.0 dBi

FCC Requirements. (a) In order to use the FCC/IC grant, the OEM must not operate or configure the module in such a way that the module will transmit more than 2 seconds telegrams per hour. For STM300C modules this can be done by properly selecting the connection of CW_0, CW_1, CP_0, and CP_1 in a way that not more than 1110 telegrams are sent per hour. If a TCM300C, STM300C or TCM320C module is used as a repeater, for instance, special consideration must be given to ensure that this requirement is met. This can be accomplished by, but not limited to, the following methods: • programming the module through the API to enforce this limit; EnOcean GmbH ▇▇▇▇▇▇▇▇▇▇▇ ▇▇▇ ▇▇▇▇▇ ▇▇▇▇▇▇▇▇▇▇▇ ▇▇▇▇▇▇▇ Phone +49.89.67 34 689-0 Fax +49.89.67 ▇▇ ▇▇▇-▇▇ ▇▇▇▇@▇▇▇▇▇▇▇.▇▇▇ ▇▇▇.▇▇▇▇▇▇▇.▇▇▇ Management: ▇▇▇▇▇▇ ▇▇▇▇▇▇▇, ▇▇▇ ▇▇▇▇▇ Registered Court Munich HRB 139781 VAT Reg No. DE813355588 Account: HypoVereinsbank München No. ▇▇▇▇▇▇▇ Bank Code 700 202 70 • installing the device in a network in which it is impossible to exceed the limit; (b) End users of products which contain the module must not have the ability to alter the firmware that governs the operation of the module. The agency grant is valid only when the module is incorporated into a final product by OEM integrators. (c) The end-user must not be provided with instructions to remove, adjust or install the module. The OEM must instruct the end user not to do so by providing appropriate written documentation (d) FCC labeling requirements: The Original Equipment Manufacturer (OEM) must ensure that FCC labeling requirements are met. This includes a clearly visible label on the outside of the final product. Attaching a label to a removable portion of the final product, such as a battery cover, is not permitted. The label must include the following text: For STM300C / TCM300C based products - For TCM320C based products - The writing on the label must appear exactly as shown. Do not add spaces or put the text on multiple lines. Any additional text needed on the label may appear on different lines. The user manual for the end product must also contain the text given above. (e) Changes or modifications not expressly approved by EnOcean could void the user's authority to operate the equipment. (f) The module must be used with only the following approved antenna(s). EnOcean GmbH ▇▇▇▇▇▇▇▇▇▇▇ ▇▇▇ ▇▇▇▇▇ ▇▇▇▇▇▇▇▇▇▇▇ ▇▇▇▇▇▇▇ Phone +49.89.67 34 689-0 Fax +49.89.67 ▇▇ ▇▇▇-▇▇ ▇▇▇▇@▇▇▇▇▇▇▇.▇▇▇ ▇▇▇.▇▇▇▇▇▇▇.▇▇▇ Management: ▇▇▇▇▇▇ ▇▇▇▇▇▇▇, ▇▇▇ ▇▇▇▇▇ Registered Court Munich HRB 139781 VAT Reg No. DE813355588 Account: HypoVereinsbank München No. 2440610 ▇▇▇▇▇▇▇ Bank Code 700 202 70 (c) The end-user must not be provided with instructions 70 N.A. Wire/Monopole 1.0 dBi Labeling requirements for Industry Canada are similar to remove, adjust or install those required by the moduleFCC. The OEM must instruct the end user not to do so by providing appropriate written documentation (d) FCC labeling requirements: The Original Equipment Manufacturer (OEM) must ensure that FCC IC labeling requirements are met. This includes a A clearly visible label on the outside of the final product. Attaching a label to a non-removable portion part of the final product, such as a battery cover, is not permitted. The label product must include the following text: For STM300C / TCM300C based products - For TCM320C based products - This information can be on the same label that contains the FCC info. The writing on the label must appear exactly as shown. Do not add spaces or put the text on multiple lines. Any additional text needed on the label may appear on different lines. The user manual for Each PARTY shall be entitled to seek necessary and appropriate injunctive relief to maintain the end product must also contain status quo depending on the text given aboveoutcome of the arbitration or any other temporary measures from the courts of competent jurisdiction to enjoin the other PARTY from taking certain actions which allegedly infringe the rights of the PARTY bringing such claim, provided that any proceedings and decisions as to the merits of the dispute, including permanent injunctions, are exclusively governed and resolved by arbitration in accordance with the first paragraph of this Article 9. EnOcean GmbH ▇▇▇▇▇▇▇▇▇▇▇ ▇▇▇ ▇▇▇▇▇ ▇▇▇▇▇▇▇▇▇▇▇ ▇▇▇▇▇▇▇ Phone +49.89.67 34 689-0 Fax +49.89.67 ▇▇ ▇▇▇-▇▇ ▇▇▇▇@▇▇▇▇▇▇▇. (e) Changes or modifications not expressly approved by EnOcean could void the user's authority to operate the equipment▇▇▇ ▇▇▇. (f) The module must be used with only the following approved antenna(s)▇▇▇▇▇▇▇.▇▇▇ Management: ▇▇▇▇▇▇ ▇▇▇▇▇▇▇, ▇▇▇ ▇▇▇▇▇ Registered Court Munich HRB 139781 VAT Reg No. N.A. Wire/Monopole 1.0 dBiDE813355588 Account: HypoVereinsbank München No. ▇▇▇▇▇▇▇ Bank Code 700 202 70