ELECTRICAL ENGINEERING SERVICES Sample Clauses

ELECTRICAL ENGINEERING SERVICES. 1. Provision of new Electrical Service – Stantec will coordinate with FPL for the provision of a new electrical service for the purpose of installing sports lighting on the new fields. It is unknown at this time if FPL has the appropriate availability of voltage and capacity of power for the necessary lighting at this location. This proposal only includes coordination and on-site provisions. This proposal does not include any offsite improvements. It should be noted that FPL may have charges for providing services to the park which will be paid by the City.
Sample 1
AutoNDA by SimpleDocs
ELECTRICAL ENGINEERING SERVICES. Tasks may include work such as the following: planning, assessment, designing, plan preparation, coordination with utilities, energy modelling or auditing, supplementing Zoo staff to complete electrical issues related to other projects, estimating, and other tasks as needed.
Sample 1
ELECTRICAL ENGINEERING SERVICES. Provide the services of a licensed electrical engineer who will coordinate the design of a new safety light system and obtain permits from Southern California Edison and the City’s Building Division.
Sample 1
ELECTRICAL ENGINEERING SERVICES. Employer shall: • Ensure compliance to all electrical codes and requirements as stated in the CAF and Hot workshop electrical designs (Ref: 07092-F3-B and 07092-F4-B) and other design for ACP2 • The Supervisor signs on the Contractor’s Certificate of Compliance (COC); In addition the Employer shall: • Be responsible for all design field changes; and • The Supervisor ensures compliance to all mechanical and electrical codes and requirements.
Sample 1
ELECTRICAL ENGINEERING SERVICES. Fluorescent light fittings are generally provided throughout the ground and first floor areas. A fire alarm installation is provided with control panel adjacent the main entrance door and with fire alarm bells and break glass points adjacent fire exit doors. Half height perimeter three compartment bunking is generally provided to the external walls at first floor level. MECHANICAL ENGINEERING SERVICES Warm air ducted heating is provided to the first floor and part second floor through grills incorporated within the suspended ceiling. Hot air fan heaters arc provided to the ground floor storage areas. [LETTERHEAD OF XXXXXXXX XXXXXXX & PARTNERS] SCHEDULE OF CONDITION ON FALCON XXXX XXX, XXXXXXXXXX XXX, XXXXX XXXXXXX, XXXXXXXXX -------------------------------------------------------------------------------- Radiators are provided to the perimeter of the building on the first floor and in the main reception and lobby area at ground floor level. [LETTERHEAD OF XXXXXXXX XXXXXXX & PARTNERS] SCHEDULE OF CONDITION ON FALCON XXXX XXX, XXXXXXXXXX XXX, XXXXX XXXXXXX, XXXXXXXXX -------------------------------------------------------------------------------- INTERNALLY GROUND FLOOR SOUTH WING -------------------------------------------------------------------------------- LOCATION/ELEMENT CONDITION -------------------------------------------------------------------------------- Ceiling Emulsion painted concrete soffit is in a good decorative condition. Painted steel frame is in good decorative condition. 2 no. strips of fluorescent light fittings in working order. -------------------------------------------------------------------------------- Walls The curtain xxxxxxx is generally in good condition consistent with age. The emulsion painted Clockwork walls are in good decorative condition. Emulsion painted columns are in good decorative condition. Painted timber skirtings are generally in good decorative condition. -------------------------------------------------------------------------------- Doors The main door leading from the lobby area to the south wing is in reasonable condition and working order. The fire exit door on the south elevation is in reasonable condition consistent with age and is in working order. The loading bay door is in reasonable condition. -------------------------------------------------------------------------------- Floors Painted concrete floor is in reasonable decorative condition. There are a number of minor shrinkages to the concrete slab...
Sample 1
ELECTRICAL ENGINEERING SERVICES. The work performed by the CONSULTANT shall include, but not be limited to, the following: The CONSULTANT will provide completely designed projects ready for letting, partial plans to be inserted into other roadway plans for letting, or reports and studies as directed. The CONSULTANT will produce plan sets on a CADD system using current ALDOT CADD Standards and be capable of electronically transmitting/receiving project files or individual sheets to/from the ALDOT’s Central Office. Upon notice from the STATE for Need of Services, the CONSULTANT will attend a scope of work meeting. Within five (5) workdays after the scope of work meeting the CONSULTANT will provide a written project scope including the understanding and a detail cost estimate for the required design services for review and approval by the STATE. The CONSULTANT will proceed with the work on a project only after receiving written authorization from the STATE. All lighting level calculations will be made using AGi32 or other Department approved programs. The CONSULTANT shall perform all calculations using the illuminance method of design. The CONSULTANT shall attend the Plan-in-Hand meeting and the PS&E meeting or the combination Plan-in-Hand/PS&E meeting to discuss the calculation results and lighting design with ALDOT. The CONSULTANT will write specifications for all special hardware and installation techniques not covered in the ALDOT’s existing Section 750 – Roadway Lighting, Section 756 – Electrical Conduits under Roadway, and Section 889 – Roadway Lighting Materials. The CONSULTANT will provide to the STATE a complete set of final plans, including all sheets in a .DGN format on DVD or other optical storage media. In addition, the CONSULTANT will provide the STATE with a complete full-size (24’ x 36”) plans on paper with the exception of the title sheet, which shall be submitted on Mylar. All calculations will be turned over in a systematic manner.
Sample 1
ELECTRICAL ENGINEERING SERVICES. Employer shall: • Advise and instruct the Contractor on all electrical requirements; • Ensure compliance to all electrical codes and requirements as stated in the Decontamination workshop electrical design 07092 – M6 – B. • Signs on the Contractor’s Certificate of Compliance (COC); In addition the Employer shall: • Advise and instruct the Contractor on all heating, Ventilation and Air-Conditioning (HVAC) and any other mechanical requirements; • Be responsible for all design field changes. All electrical engineering services have been done by others, and therefore no electrical engineering services required from the Contractor. The Contractor shall refer to the Works Information section 1.4 of this document.
Sample 1
AutoNDA by SimpleDocs

Related to ELECTRICAL ENGINEERING SERVICES

  • Engineering Services Definition: Engineering Services includes any service or creative work, the adequate performance of which requires education, training and experience in the application of special knowledge in consulting, investigating, evaluating, planning and designing, engineering principles. Engineering Services covered by the Xxxxxx Architect-Engineers Act (40 U.S.C. 1102) are not covered in the primary scope of OASIS SB. Examples: Service areas that are included under the Engineering Services discipline include, but are not limited to the following:

  • ELECTRICAL SERVICES A. Landlord shall provide electric power for a combined load of 3.0 xxxxx per square foot of useable area for lighting and for office machines through standard receptacles for the typical office space.

  • Building Services Labor Law Article 9 applies to Contracts for building service work over $1,500 with a public agency, that: (i) involve the care or maintenance of an existing building, or (ii) involve the transportation of office furniture or equipment to or from such building, or (iii) involve the transportation and delivery of fossil fuel to such building, and (iv) the principal purpose of which is to furnish services through use of building service employees.

  • Technical Services Party B will provide technical services and training to Party A, taking advantage of Party B’s advanced network, website and multimedia technologies to improve Party A’s system integration. Such technical services shall include:

  • Utility Services Company agrees to pay the full cost and expense associated with its use of all utilities, including but not limited to water, sanitary sewer, electric, storm drainage, and telecommunication services.

  • Engineering Forest Service completed survey and design for Specified Roads prior to timber sale advertisement, unless otherwise shown in A8 or Purchaser survey and design are specified in A7. On those roads for which Forest Service completes the design during the contract, the design quantities shall be used as the basis for revising estimated costs stated in the Schedule of Items and adjusting Timber Sale Account. Forest Service engineering shall be completed according to the schedule in A8. Should Forest Service be unable to perform the designated survey and design by the completion date or other agreed to time, upon written agreement, Purchaser shall assume responsibility for such work. In such event, Contracting Officer shall revise:

  • Janitorial Services Tenant will not employ any person for the purpose of cleaning the Premises or permit any person to enter the Building for such purpose other than Landlord's janitorial service, except with Landlord's prior written consent. Tenant will not necessitate, and will be liable for the cost of, any undue amount of janitorial labor by reason of Tenant's carelessness in or indifference to the preservation of good order and cleanliness in the Premises. Janitorial service will not be furnished to areas in the Premises on nights when such areas are occupied after 9:30 p.m., unless such service is extended by written agreement to a later hour in specifically designated areas of the Premises.

  • Manufacturing Services Jabil will manufacture the Product in accordance with the Specifications and any applicable Build Schedules. Jabil will reply to each proposed Build Schedule that is submitted in accordance with the terms of this Agreement by notifying Company of its acceptance or rejection within three (3) business days of receipt of any proposed Build Schedule. In the event of Jabil’s rejection of a proposed Build Schedule, Jabil’s notice of rejection will specify the basis for such rejection. When requested by Company, and subject to appropriate fee and cost adjustments, Jabil will provide Additional Services for existing or future Product manufactured by Jabil. Company shall be solely responsible for the sufficiency and adequacy of the Specifications [***].

  • Marketing Services The Manager shall provide advice and assistance in the marketing of the Vessels, including the identification of potential customers, identification of Vessels available for charter opportunities and preparation of bids.

  • PROJECT SERVICES Landlord shall furnish services as follows:

Time is Money Join Law Insider Premium to draft better contracts faster.