Denomination and Numbering Sample Clauses

Denomination and Numbering. The Bonds shall be issued within a series in the denomination of $5,000 or any multiple thereof within a single maturity, not exceeding the principal amount of the Bonds maturing in such year. Each Bond shall be numbered by the Bond Registrar/Paying Agent (identified in Section 9 hereof) in such a fashion as to reflect the fact that it is one of the Bonds of that series, and to identify the owner thereof on the bond register of the County kept by the Bond Registrar/Paying Agent.
AutoNDA by SimpleDocs

Related to Denomination and Numbering

  • Form, Denomination and Title The Notes are in bearer form and, in the case of definitive Notes, serially numbered, in the currency (the Specified Currency) and the denominations (the Specified Denomination(s)) specified in the applicable Final Terms. Notes of one Specified Denomination may not be exchanged for Notes of another Specified Denomination. This Note may be a Fixed Rate Note, a Floating Rate Note, a Zero Coupon Note, an Inflation Linked Note (being either an Inflation Linked Interest Note, an Inflation Linked Redemption Note or a combination of the two) or a combination of any of the foregoing, depending upon the Interest Basis shown in the applicable Final Terms. Definitive Notes are issued with Coupons attached, unless they are Zero Coupon Notes in which case references to Coupons and Couponholders in the Conditions are not applicable. Subject as set out below, title to the Notes and Coupons will pass by delivery. The Issuer and the Paying Agents will (except as otherwise required by law) deem and treat the bearer of any Note or Coupon as the absolute owner thereof (whether or not overdue and notwithstanding any notice of ownership or writing thereon or notice of any previous loss or theft thereof) for all purposes but, in the case of any Global Note, without prejudice to the provisions set out in the next succeeding paragraph. For so long as any of the Notes is represented by a Global Note held on behalf of Euroclear Bank SA/NV (Euroclear) and/or Clearstream Banking S.A. (Clearstream, Luxembourg), each person (other than Euroclear or Clearstream, Luxembourg) who is for the time being shown in the records of Euroclear or of Clearstream, Luxembourg as the holder of a particular nominal amount of such Notes (in which regard any certificate or other document issued by Euroclear or Clearstream, Luxembourg as to the nominal amount of such Notes standing to the account of any person shall be conclusive and binding for all purposes save in the case of manifest error) shall be treated by the Issuer and the Paying Agents as the holder of such nominal amount of such Notes for all purposes other than with respect to the payment of principal or interest on such nominal amount of such Notes, for which purpose the bearer of the relevant Global Note shall be treated by the Issuer and any Paying Agent as the holder of such nominal amount of such Notes in accordance with and subject to the terms of the relevant Global Note and the expressions Noteholder and holder of Notes and related expressions shall be construed accordingly. Notes which are represented by a Global Note will be transferable only in accordance with the rules and procedures for the time being of Euroclear and Clearstream, Luxembourg, as the case may be. References to Euroclear and/or Clearstream, Luxembourg shall, whenever the context so permits, be deemed to include a reference to any additional or alternative clearing system specified in Part 2 of the applicable Final Terms.

  • Authorized and Issued Capital The authorized capital of the Purchaser consists of an unlimited number of common shares and an unlimited number of preferred shares, of which (i) at the date of this Agreement, 24,610,042 common shares (and no more) have been duly issued and are outstanding as fully paid and non-assessable and no preferred shares are outstanding, and (ii) at the Closing Time, 24,610,042 common shares (and no more) shall have been duly issued and shall be outstanding as fully paid and non-assessable.

  • Minimum Denominations The Original Notes shall be issued and maintained in minimum denominations of $250,000 and additional increments of $1.

  • Conversion to Single Currency 31.1 For evaluation and comparison purposes, the currency(ies) of the Tender shall be converted in a single currency as specified in the TDS.

  • Form and Denomination The Notes shall be issuable in whole in the registered form of one or more Global Notes (without coupons), in minimum denominations of U.S.$2,000 and integral multiples of U.S.$1,000 in excess thereof, and shall be transferable in integral multiples of U.S.$2,000 and integral multiples of U.S.$1,000 in excess thereof and the Depository for such Global Notes shall be The Depository Trust Company, New York, New York.

  • 200 Domestic Preferences for Procurements As appropriate and to the extent consistent with law, the non-Federal entity should, to the greatest extent practicable under a Federal award, provide a preference for the purchase, acquisition, or use of goods, products, or materials produced in the United States (including but not limited to iron, aluminum, steel, cement, and other manufactured products). The requirements of this section must be included in all subawards including all contracts and purchase orders for work or products under this award. For purposes of 2 CFR Part 200.322, “Produced in the United States” means, for iron and steel products, that all manufacturing processes, from the initial melting stag through the application of coatings, occurred in the United States. Moreover, for purposes of 2 CFR Part 200.322, “Manufactured products” means items and construction materials composed in whole or in part of non-ferrous metals such as aluminum, plastics and polymer-based products such as polyvinyl chloride pipe, aggregates such as concrete, glass, including optical fiber, and lumber. Pursuant to the above, when federal funds are expended by ESC Region 8 and TIPS Members, Vendor certifies that to the greatest extent practicable Vendor will provide a preference for the purchase, acquisition, or use of goods, products, or materials produced in the United States (including but not limited to iron, aluminum, steel, cement, and other manufactured products). Does vendor agree? Yes

  • ECR Number Environmental Commitment Record Requirements Description of ADOT Responsibilities TMP-3 The following measures will be implemented for the Selected Alternative: • All equipment exhaust systems will be in good working order. Properly designed engine enclosures and intake silencers will be used. • Equipment will be maintained on a regular basis. New equipment will be subject to new product emission standards. • Stationary equipment will be located as far away from sensitive receivers as possible. • Construction-related noise generators will be shielded from noise receivers (e.g., use temporary enclosures to shield generators or crushers, take advantage of site conditions to provide topographic separation). • Construction alerts will be distributed to keep the public informed of construction activities, and a toll-free number for construction-related complaints will be provided. • During the design phase, hours of operation will be evaluated to minimize disruptions during construction. ADOT to oversee for compliance TMP-4 Congestion from construction-related traffic will create temporary impacts in the project vicinity. The magnitude of these impacts will vary depending on the location of the sources of the fill material and of the disposition sites for surplus material, the land uses along the routes, the duration of hauling operations, staging locations, and the construction phasing. To identify acceptable routes and times of operation, ADOT, or its representative, will prepare an agreement with local agencies regarding hauling of construction materials on public streets. ADOT to oversee for compliance TP Attachment 000-0 Xxxxx Xxxxxxxx Xxxxxxx Project Record of Decision (ROD) Developer’s Environmental Commitment Requirements The following table includes the Project-specific environmental commitments as written in the ROD, with minor modifications for clarification purposes. As it relates to these Technical Provisions, references to freeway, project, South Mountain Freeway, proposed action, proposed freeway, and Selected Alternative mean the Project, and references to contractor mean Developer. Developer shall comply with and perform all of the contractor and ADOT requirements, including the ADOT obligations, commitments, and responsibilities, identified in the following table, except to the extent of those requirements that are specifically identified in the third column, entitled “Description of ADOT Responsibilities,” which are not delegated to Developer.

  • LOCATION AND DESCRIPTION The subject property is a stratified shop unit bearing postal address of Xxxx Xx. X-00-X, Xxxxxx Xxxxx Xxxxxxx, Xxxxx Xxxxx Sentral 14/KU5, Klang Sentral, Xxxxx Xxxx, Xxxx 00000 Xxxxx, Xxxxxxxx Darul Ehsan. Accommodation:- Verandah, shop area, and water closet. RESERVE PRICE:- The property will be sold on an “as is where is” basis and subject to a reserve price of RM 540,000.00 (RINGGIT MALAYSIA FIVE HUNDRED AND FORTY THOUSAND ONLY) and the Conditions of Sale, herein and by way of an Assignment from the Assignee subject to the necessary confirmations / consent being obtained by the Purchaser from the Developer and/or Proprietor and/or State Authorities and/or relevant bodies, if any is required, including all terms, conditions, stipulations and covenants which were and may be imposed by the Developer and the relevant authority. All expenses incurred in obtaining the said consent shall be borne by the Purchaser. Any arrears of quit rent, assessment, service/maintenance charges, sinking fund including the late payment interest (if any) which may be lawfully due to any relevant authority or the Developer or Proprietor or relevant third parties entitled thereto up to the date of successful sale of the subject property shall be borne out of the purchase money. The Purchaser shall bear and pay all fees and expenses including but not limited to all legal fees, stamp duty and registration fees in connection with, incidental to or pursuant to the Assignment and all other documents necessary for effecting the transfer or assigning the beneficial ownership in the property to the Purchaser and shall also bear all risks in relation to the purchase of the Property. Online bidders are further subject to the Terms & Conditions on xxx.xxxxxxxxxxxxxxxx.xxx. All intending bidders are required to deposit 10% of the fixed reserve price (“the initial deposit”) by way of bank draft or cashier’s order crossed “A/C PAYEE ONLY” made payable to OCBC BANK (MALAYSIA) BERHAD prior to the auction sale or remit the same through online banking transfer, one (1) working day before auction date and pay the difference between the initial deposit and the sum equivalent to 10% of the successful bid price either in cash or bank draft or cashier’s order crossed “A/C PAYEE ONLY” made payable to OCBC BANK (MALAYSIA) BERHAD immediately after the fall of the hammer with the undermentioned Auctioneer. The balance of the purchase price is to be settled within one hundred and twenty (120) days from the date of auction sale to OCBC BANK (MALAYSIA) BERHAD. For online bidders please refer to the Terms & Conditions on xxx.xxxxxxxxxxxxxxxx.xxx on the manner of payment of the deposit. FOR FURTHER PARTICULARS, please apply to Messrs. Xxxxx & Xxxx, Solicitors for the Assignee/Bank, at No. 16-08, Xxxxx 00 Xxxxx, Xxxxxx Xxxxxxx, 000, Xxxxx Xxxxxx Xxxxx Xxxxxx, 50100 Kuala Lumpur. (Ref No: RL/OCBC-LIT(NSec)/00000-0000(1), Tel No: 00-00000000 Fax No: 00- 00000000) or the undermentioned Auctioneer: EHSAN AUCTIONEERS SDN. BHD. (Co. No. 617309-U) DATO’ HAJI XXXXX XXXXX BIN X.X. XXXX (D.I.M.P) Xxxxx X-00-0X, Xxxxx 00, Xxxxx X, Xxxxx Xxxxxx II, / XXXXX XXXXX BIN XXXXXX 00, Xxxxx Xxx Xxxx Xxxx, 50450 Kuala Lumpur (Licensed Auctioneers) Tel No.: 00-0000 0000 Fax No.: 00-0000 0000 Our Ref: XXXXX/OCBC0845/AW(5) Website: xxx.xxxxxxxxxxxxxxxx.xxx E-mail: xxxx@xxxxxxxxxxxxxxxx.xxx HP NO. : 000 0000 000 (CALL, WHATSAPP & SMS) PERISYTIHARAN JUALAN DALAM PERKARA PERJANJIAN KEMUDAHAN (PERBANKAN PERNIAGAAN/ PASARAN MASS ENTERPRISE), SURATIKATAN PENYERAHAN HAK (PIHAK PERTAMA) XXX SURAT KUASA WAKIL (PIHAK PERTAMA) KESEMUANYA BERTARIKH 07HB OGOS, 2014 DI ANTARA OCBC BANK (MALAYSIA) BERHAD (295400-W) PIHAK PEMEGANG SERAHHAK / BANK XXX MH CENTURY PROPERTY HOLDING SDN BHD (No. SYARIKAT: 1085186-P) PIHAK PENYERAHHAK/PIHAK PEMINJAM Menurut kuasa xxx xxx xxxx telah diberikan kepada Pihak Pemegang Serahhak/Bank di bawah perkara Perjanjian Kemudahan (Perbankan Perniagaan/ Pasaran Mass Enterprise), Suratikatan Penyerahan Hak (Pihak Pertama) Xxx Surat Kuasa Wakil (Pihak Pertama) Kesemuanya Bertarikh 07hb Ogos, 2014 di antara Pihak Penyerahhak/Peminjam xxx Pihak Pemegang Serahhak/Bank, xxx berkenaan dengan Perjanjian Jualbeli di antara NPO Development Sdn Bhd (“Penjual”), MH Century Property Holding Sdn Bhd (“Pembeli”) and Pin Hwa Properties Sdn Bhd (“Xxxx Punya”) bertarikh pada 05hb Jun, 2014 adalah dengan ini diisytiharkan bahawa Pihak Pemegang Serahhak dengan dibantu oleh Pelelong yang tersebut di bawah:- AKAN MENJUAL HARTANAH YANG DITERANGKAN DI BAWAH SECARA:- LELONGAN AWAM SECARA ATAS TALIAN PADA HARI SELASA, 10HB JANUARI, 2023, JAM 10.30 PAGI, XX XXXXX WEB xxx.xxxxxxxxxxxxxxxx.xxx Bakal pembida boleh mengemukakan bida untuk hartanah dalam talian melalui xxx.xxxxxxxxxxxxxxxx.xxx (Untuk pembidaan dalam talian, xxxx daftar sekurang-kurangnya satu (1) hari bekerja sebelum hari lelong untuk tujuan pendaftaran & pengesahan)

  • CFR PART 200 Domestic Preferences for Procurements As appropriate and to the extent consistent with law, the non-Federal entity should, to the greatest extent practicable under a Federal award, provide a preference for the purchase, acquisition, or use of goods, products, or materials produced in the United States (including but not limited to iron, aluminum, steel, cement, and other manufactured products). The requirements of this section must be included in all subawards including all contracts and purchase orders for work or products under this award. For purposes of 2 CFR Part 200.322, “Produced in the United States” means, for iron and steel products, that all manufacturing processes, from the initial melting stag through the application of coatings, occurred in the United States. Moreover, for purposes of 2 CFR Part 200.322, “Manufactured products” means items and construction materials composed in whole or in part of non-ferrous metals such as aluminum, plastics and polymer-based products such as polyvinyl chloride pipe, aggregates such as concrete, class, including optical fiber, and lumber. Pursuant to the above, when federal funds are expended by ESC Region 8 and TIPS Members, Vendor certifies that to the greatest extent practicable Vendor will provide a preference for the purchase, acquisition, or use of goods, products, or materials produced in the United States (including but not limited to iron, aluminum, steel, cement, and other manufactured products). Does vendor agree? Yes

  • Sector Sub-Sector Industry Classification Level of Government Type of Obligation Description of Measure Source of Measure All sectors : : - : Central : National Treatment Senior Management and Board of Directors : National Treatment and the Senior Management and Board of Directors obligations shall not apply to any measure relating to small and medium sized domestic market enterprise2. Foreign equity is restricted to a maximum of 40% for domestic market enterprises with paid-in equity capital of less than the equivalent of USD 200,000 Note: Members of the Board of Directors or governing body of corporation or associations shall be allowed in proportion to their allowable participation or share in the capital of such enterprises. : -1987 Constitution of the Republic of the Philippines. - Foreign Investments Act of 1991 (R.A. No. 7042, as amended by R.A. No. 8179). -Presidential and Administrative Issuances. ∞ 2 The concept of a small and medium sized domestic market enterprise is an enterprise with paid in equity capital of less than the equivalent of USD 200,000.00.

Time is Money Join Law Insider Premium to draft better contracts faster.