Common use of CONTRACTOR WORK Clause in Contracts

CONTRACTOR WORK. 9. 1 The contractor shall complete the following tasks according to the agreed time and requirements: (1) Submission time of design documents to be completed by contractors with design qualification level and business scope: (2) The name and completion time of the plan and report should be provided: (3) Responsibility and requirements for construction safety and security and non-nighttime construction lighting: According to the needs of the project, provide and maintain lighting and fence facilities used in construction, and be responsible for security protection. (4) Requirements for office and living houses and facilities provided to the contractor: three _______________________________________________ (5) Procedures related to construction site traffic, sanitation, and construction noise management that need to be handled by the contractor: (6) Special requirements and costs for finished product protection of completed projects: The contractor of finished product protection for the construction of the contractor shall not bear any costs. For the construction of the project separately subcontracted by the contractor, the contractor shall charge the finished product protection fee at 1% of the cost. (7) The protection requirements and costs for underground pipelines around the construction site and adjacent buildings, structures (including cultural relics protection buildings), and ancient and famous trees are implemented according to the general terms, and the cost is borne by the contractor. (8) Requirements for cleanliness and sanitation of the construction site: ensure that the construction site is clean and in compliance with relevant regulations on environmental sanitation management. (9) Other work agreed by the parties: One ---- One Construction design and construction period 10、 Schedule 10.1 The time for the contractor to provide the construction organization design (construction plan) and schedule: within w days after the start of construction. Time confirmed by the worker division: within 7 days after receiving the contractor’s construction organization design and schedule. 10.2 Schedule requirements in group engineering: _________________________ 13.1 Other conditions agreed by the parties for the postponement of the construction period: If the Employer fails to provide the start-up conditions as required, if the Employer fails to complete the relevant procedures and is ordered to suspend the construction by the competent authority, the design change will be the most. If there is a suspension due to force majeure and other non-contractor reasons, the construction period will be postponed accordingly and shall be approved by the supervisor and the on-site representative of Party A. four, Quality and acceptance

CONTRACTOR WORK. 9. 1 The contractor shall complete completes the following tasks according to the content and time agreed time and requirementsin the special terms: (1) Submission time of design documents According to be completed the entrusted by contractors with the contractor, within the design qualification level and business scope:the scope allowed by the business, the construction drawing design or the design supporting the project is completed and used by the engineer after confirmation, and the contractor shall bear the costs incurred; (2) The name Provide engineers with annual, quarterly, and completion time of the plan monthly project progress plans and report should be provided:corresponding progress statistical reports; (3) Responsibility and requirements for construction safety and security and non-nighttime construction lighting: According to the needs of the project, provide and maintain lighting and fence facilities used in for non-night construction, and be responsible for security protection.take charge of safety and security; (4) Requirements Provide the contractor with houses and facilities for office and living houses and facilities provided at the construction site according to the contractor: three _______________________________________________quantities and requirements agreed in the special terms, and the contractor shall bear the costs incurred; (5) Procedures related to Comply with relevant government regulations on construction site traffic, sanitationconstruction noise, environmental protection and production safety, etc., go through relevant formalities in accordance with regulations, and construction noise management that need to be handled by notify the contractor in writing.The contractor shall bear the costs incurred as a result of the contractor:’s responsibility Except fines caused; (6) Special requirements and costs for finished product protection of Before the completed projects: The contractor of finished product protection for the construction of the contractor shall not bear any costs. For the construction of the project separately subcontracted by is delivered to the contractor, the contractor shall charge be responsible for the finished product protection fee at 1% of the cost.completed project in accordance with the special terms. If damage occurs during the protection period, the contractor shall repair it at its own expense; the contractor requires the contractor to obtain the project site protected by special measures and the corresponding Additional contract price, both parties agree in special terms; (7) The protection requirements and costs for According to the special provisions, do a good job of protecting the underground pipelines around at the construction site and adjacent buildings, structures (including cultural relics heritage protection buildings), and ancient and famous trees are implemented according to the general terms, and the cost is borne by the contractor.trees; (8) Requirements for cleanliness and sanitation of the construction site: ensure Ensure that the construction site is clean and in compliance accordance with the relevant regulations on of environmental sanitation management., clean up the site before handing over to meet the requirements stipulated in the special terms, and bear the losses and fines for violating the relevant regulations due to its own reasons; (9) Other work agreed by the parties: One ---- One Construction design and construction period 10、 Schedule 10.1 The time for other tasks that the contractor to provide the construction organization design (construction plan) and schedule: within w days after the start of construction. Time confirmed by the worker division: within 7 days after receiving the contractor’s construction organization design and schedule. 10.2 Schedule requirements in group engineering: _________________________ 13.1 Other conditions should do are agreed by the parties for in the postponement of the construction period: If the Employer fails to provide the start-up conditions as required, if the Employer fails to complete the relevant procedures and is ordered to suspend the construction by the competent authority, the design change will be the most. If there is a suspension due to force majeure and other non-contractor reasons, the construction period will be postponed accordingly and shall be approved by the supervisor and the on-site representative of Party A. four, Quality and acceptancespecial terms.