Common use of Boat Clause in Contracts

Boat. a. Boats must comply with all current bye-law legislation in relation to construction and equipment. b. Engines must be fitted with a drip tray. Engines must be maintained so as to minimise the likelihood of fuel or oil leaks into bilges. c. Boats must be fitted with functioning waste water holding tank to store black water discharge from on board toilets. • Boats must have a manually operated bilge pump fitted and have a bilge high level warning. • Boats must have appropriate certification for gas and electrical fits. • Boats must be capable of moving under their own steam and be capable of navigation in the canal network. • Boats must be maintained in good order, and be clean and sea worthy, decks should be kept neat and tidy. Boats should be well painted and rust free. Timber work should be kept well varnished. • Prior approval from the Dock Superintendent is required for all minor repairs and maintenance to be carried out at the Mooring. All other works must be carried out away from the mooring area. No works shall be permitted between the hours of 20:00hrs and 08:00hrs. • Spray painting, grinding, hot metal work are not permitted in an extended mooring area. • A boats length includes all overhangs such as bowspits, swim platforms, davits with or without dingy or transom mounted outboards in the up position. • A minimum of a metre must separate boats moored on the end section of the jetty without fingers. • Any plants and flowers on the boat should be well maintained. • The area surrounding the boat should be kept clean and tidy.

Boat. a. Boats must comply with all current bye-law legislation in relation to construction and equipment. b. Engines must be fitted with a drip tray. Engines must be maintained so as to minimise the likelihood of fuel or oil leaks into bilges. c. Boats must be fitted with functioning waste water holding tank to store black water discharge from on board toilets. • . d. Boats must have a manually operated bilge pump fitted and have a bilge Bilge high level warning. • . e. Boats must have appropriate certification for gas and electrical fits. • . f. Boats must be capable of moving under their own steam and be capable of navigation in the canal network. • . g. Boats must be maintained in good order, and be clean and sea worthy, decks should be kept neat and tidy. Boats should be well painted and rust free. Timber work should be kept well varnished. • . h. Prior approval from the Dock Superintendent is required for all minor repairs and maintenance to be carried out at the Mooring. All other works must be carried out away from the mooring area. No works shall be permitted between the hours of 20:00hrs and 08:00hrs. • . i. Spray painting, grinding, hot metal work are not permitted in an extended mooring area. • . j. A boats length includes all overhangs such as bowspits, swim platforms, davits with or without dingy or transom mounted outboards in the up position. • . k. A minimum of a metre must separate boats moored on the end section of the jetty without fingers. • . l. Any plants and flowers on the boat should be well maintained. • . m. The area surrounding the boat should be kept clean and tidy.