Common use of BASIC PROVISIONS Clause in Contracts

BASIC PROVISIONS. 1.1 Under this Contract the Supplier shall: • develop (based on the detailed conceptual design provided by the Client) detailed design, manufacture, test and deliver to the Client 5 optomechanical mounts of large laser mirrors (identified as OM7, OM8, OM9, SPM1 and OOM1) • develop (based on the detailed conceptual design provided by the Client) detailed design of the optomechanical mount of a large laser mirror identified as OM7.5 2 a) hereof) 1.2 The following contractual call in options are hereby agreed by the Parties: a) optional manufacture, testing and delivery of the optomechanical mount OM7.5 in accordance with this Contract and all its Annexes including Annex 1 (Summary of Deliverables, Time Schedule and Payments) (hereinafter ”Option 1”); b) optional provision of extra design works up to 40 man-days according to Annex 1 (Summary of Deliverables, Time Schedule and Payments); c) optional installation technical support up to 20 man-days according to Annex 1 (Summary of Deliverables, Time Schedule and Payments); (all options are referred to hereinafter together as the “Options”), (except for the Art. 8 hereof any provisions of this Contract applicable on the Object of Purchase apply on the performance of the Options (if activated) and results of the performance by the Supplier similarly). 1.3 If for the fulfilment of the requirements of the Client under this Contract or for the proper operation of the Object of Purchase are necessary other deliveries and activities not expressly mentioned in this Contract, the Supplier shall procure such deliveries or shall carry out such activities at its own expense without any effect on the Purchase Price. 1.4 During the performance of this Contract, the Client is entitled to further specify or clarify the requirements stipulated in Annex 2 (Detailed Technical Specification). Such further requirements can be requested by the Client no later than one month before the scheduled completion of the D2 Deliverable (for optomechanical mounts OM7, OM7.5, OM8, OM9 and SPM1 and for the motion control system MCTR) and of the D3 Deliverable for the optomechanical mount OOM1. These further requirements shall be binding for the Supplier. Under this provision, the Client is not entitled to substantially change the existing requirements stipulated in Annex 2 (Detailed Technical Specifications). Should any request for change result in increase of Purchase Price such request is binding for the Supplier only if the Purchase Price modification is agreed between Parties and such modification is in accordance with the Act No. 134/2016 Coll., on public contracts awarding, and binding rules of the Operational Program. 1.5 The Object of Purchase and its components and parts shall be delivered new (i.e. not remanufactured). 1.6 The final cleaning of all components, testing and verification of performance of the integrated mounts and integration of all instrumentation with the control system (MCTR) must not be performed by a subcontractor. 1.7 The Supplier shall perform this Contract in Deliverables defined in Annex 1 (Summary of Deliverables, Time Schedule and Payments).

BASIC PROVISIONS. 1.1 Under this Contract the Supplier shall: • develop (based on the detailed conceptual design provided by the Client) detailed design, manufacture, test and deliver Seller shall hand over to the Client 5 optomechanical mounts of large laser mirrors (identified as OM7Buyer a GNSS recievers for space weather monitoring, OM8, OM9, SPM1 and OOM1) • develop (based on the detailed conceptual design provided by the Client) detailed design of the optomechanical mount of a large laser mirror identified as OM7.5 2 a) hereof) 1.2 The following contractual call which shall meet requirements listed in options are hereby agreed by the Parties: a) optional manufacture, testing and delivery of the optomechanical mount OM7.5 in accordance with this Contract and all its Annexes including Annex 1 (Summary Technical Description of Deliverables, Time Schedule and Paymentsthe Offered Performance) (hereinafter ”Option 1”); b) optional provision of extra design works up to 40 man-days according to Annex 1 (Summary of Deliverables, Time Schedule and Payments); c) optional installation technical support up to 20 man-days according to Annex 1 (Summary of Deliverables, Time Schedule and Payments); (all options are referred to hereinafter together as the “Options”), (except for the Art. 8 hereof any provisions of this Contract applicable on (“Object of Purchase”) and shall transfer to the Buyer ownership right to the Object of Purchase, and the Buyer shall take over the Object of Purchase apply on and shall pay the performance Seller the Purchase Price (as defined below), all under the terms and conditions stipulated in this Contract. Under this Contract the Seller shall also carry out following activities (“Related Activities”): to prepare manufacturing drawings of the Options Object of Purchase as further described in Annex 2 (Technical Specification); to verify that the Object of Purchase meets all requirements stipulated in this Contract and adjust the Object of Purchase to the place of delivery, if activated) necessary; to elaborate and results hand over to the Buyer operational, installation and maintenance manuals of the performance Object of Purchase and other documents that are necessary for the proper takeover and use of the Object of Purchase in English language in electronic form in the extent specified in Annex 2 (Technical Specification); to handover the declaration of conformity of the Object of Purchase with the approved standards; to elaborate a list of particular items of the Object of Purchase for the purposes of control; to provide training of competent persons, (I.) hardware training for two people and software training for two people in the extent of at least 10 hours, all maintenance servicing will be shown by Seller, Buyer is entitled to get audio and video recording; (II.) operator training in the Supplier similarly). 1.3 If extent of at least 8 hours which will be held after successful completion of Site Acceptance Test “SAT” at the place of delivery. The Seller promises to the Buyer that if for the fulfilment of the requirements of the Client Buyer under this Contract or for the proper operation of the Object of Purchase are necessary other deliveries and activities not expressly mentioned in this Contract, the Supplier Seller shall procure such deliveries or shall carry out such activities at its own expense without any effect on the Purchase Price. 1.4 During the performance of this Contract, the Client is entitled to further specify or clarify the requirements stipulated in Annex 2 (Detailed Technical Specification). Such further requirements can be requested by the Client no later than one month before the scheduled completion of the D2 Deliverable (for optomechanical mounts OM7, OM7.5, OM8, OM9 and SPM1 and for the motion control system MCTR) and of the D3 Deliverable for the optomechanical mount OOM1. These further requirements shall be binding for the Supplier. Under this provision, the Client is not entitled to substantially change the existing requirements stipulated in Annex 2 (Detailed Technical Specifications). Should any request for change result in increase of Purchase Price such request is binding for the Supplier only if the Purchase Price modification is agreed between Parties and such modification is in accordance with the Act No. 134/2016 Coll., on public contracts awarding, and binding rules of the Operational Program. 1.5 The Object of Purchase and its components and parts shall be delivered new (i.e. not remanufactured). 1.6 The final cleaning of all components, testing and verification of performance of the integrated mounts and integration of all instrumentation with the control system (MCTR) must not be performed by a subcontractor. 1.7 The Supplier shall perform this Contract in Deliverables defined in Annex 1 (Summary of Deliverables, Time Schedule and Payments).

BASIC PROVISIONS. 1.1 Under this Contract the Supplier shall: • develop (based on the detailed conceptual design provided by the Client) detailed design, manufacture, test and deliver Seller shall hand over to the Client 5 optomechanical mounts of large laser mirrors (identified as OM7Buyer a AdvaPIX TPX3 with 300um Si sensor, OM8, OM9, SPM1 and OOM1) • develop (based on the detailed conceptual design provided by the Client) detailed design of the optomechanical mount of a large laser mirror identified as OM7.5 2 a) hereof) 1.2 The following contractual call which shall meet requirements listed in options are hereby agreed by the Parties: a) optional manufacture, testing and delivery of the optomechanical mount OM7.5 in accordance with this Contract and all its Annexes including Annex 1 (Summary Technical Description of Deliverables, Time Schedule and Paymentsthe Offered Performance) (hereinafter ”Option 1”); b) optional provision of extra design works up to 40 man-days according to Annex 1 (Summary of Deliverables, Time Schedule and Payments); c) optional installation technical support up to 20 man-days according to Annex 1 (Summary of Deliverables, Time Schedule and Payments); (all options are referred to hereinafter together as the “Options”), (except for the Art. 8 hereof any provisions of this Contract applicable on (“Object of Purchase”) and shall transfer to the Buyer ownership right to the Object of Purchase, and the Buyer shall take over the Object of Purchase apply on and shall pay the performance Seller the Purchase Price (as defined below), all under the terms and conditions stipulated in this Contract. Under this Contract the Seller shall also carry out following activities (“Related Activities”): to prepare manufacturing drawings of the Options Object of Purchase as further described in Annex 2 (Technical Specification); to verify that the Object of Purchase meets all requirements stipulated in this Contract and adjust the Object of Purchase to the place of delivery, if activated) necessary; to elaborate and results hand over to the Buyer operational, installation and maintenance manuals of the performance Object of Purchase and other documents that are necessary for the proper takeover and use of the Object of Purchase in English language in electronic form in the extent specified in Annex 2 (Technical Specification); to handover the declaration of conformity of the Object of Purchase with the approved standards; to elaborate a list of particular items of the Object of Purchase for the purposes of control; to provide training of competent persons, (I.) hardware training for two people and software training for two people in the extent of at least 10 hours, all maintenance servicing will be shown by Seller, Buyer is entitled to get audio and video recording; (II.) operator training in the Supplier similarly). 1.3 If extent of at least 8 hours which will be held after successful completion of Site Acceptance Test “SAT” at the place of delivery. The Seller promises to the Buyer that if for the fulfilment of the requirements of the Client Buyer under this Contract or for the proper operation of the Object of Purchase are necessary other deliveries and activities not expressly mentioned in this Contract, the Supplier Seller shall procure such deliveries or shall carry out such activities at its own expense without any effect on the Purchase Price. 1.4 During the performance of this Contract, the Client is entitled to further specify or clarify the requirements stipulated in Annex 2 (Detailed Technical Specification). Such further requirements can be requested by the Client no later than one month before the scheduled completion of the D2 Deliverable (for optomechanical mounts OM7, OM7.5, OM8, OM9 and SPM1 and for the motion control system MCTR) and of the D3 Deliverable for the optomechanical mount OOM1. These further requirements shall be binding for the Supplier. Under this provision, the Client is not entitled to substantially change the existing requirements stipulated in Annex 2 (Detailed Technical Specifications). Should any request for change result in increase of Purchase Price such request is binding for the Supplier only if the Purchase Price modification is agreed between Parties and such modification is in accordance with the Act No. 134/2016 Coll., on public contracts awarding, and binding rules of the Operational Program. 1.5 The Object of Purchase and its components and parts shall be delivered new (i.e. not remanufactured). 1.6 The final cleaning of all components, testing and verification of performance of the integrated mounts and integration of all instrumentation with the control system (MCTR) must not be performed by a subcontractor. 1.7 The Supplier shall perform this Contract in Deliverables defined in Annex 1 (Summary of Deliverables, Time Schedule and Payments).

BASIC PROVISIONS. 1.1 Under this Contract the Supplier shall: • develop (based on the detailed conceptual design provided by the Client) detailed design, manufacture, test and deliver Seller shall hand over to the Client 5 optomechanical mounts of large laser mirrors (identified as OM7Buyer a Optical Cryostat Optistat DN2, OM8, OM9, SPM1 and OOM1) • develop (based on the detailed conceptual design provided by the Client) detailed design of the optomechanical mount of a large laser mirror identified as OM7.5 2 a) hereof) 1.2 The following contractual call which shall meet requirements listed in options are hereby agreed by the Parties: a) optional manufacture, testing and delivery of the optomechanical mount OM7.5 in accordance with this Contract and all its Annexes including Annex 1 (Summary Technical Description of Deliverables, Time Schedule and Paymentsthe Offered Performance) (hereinafter ”Option 1”); b) optional provision of extra design works up to 40 man-days according to Annex 1 (Summary of Deliverables, Time Schedule and Payments); c) optional installation technical support up to 20 man-days according to Annex 1 (Summary of Deliverables, Time Schedule and Payments); (all options are referred to hereinafter together as the “Options”), (except for the Art. 8 hereof any provisions of this Contract applicable on (“Object of Purchase”) and shall transfer to the Buyer ownership right to the Object of Purchase, and the Buyer shall take over the Object of Purchase apply on and shall pay the performance Seller the Purchase Price (as defined below), all under the terms and conditions stipulated in this Contract. Under this Contract the Seller shall also carry out following activities (“Related Activities”): to prepare manufacturing drawings of the Options Object of Purchase as further described in Annex 2 (Technical Specification) to verify that the Object of Purchase meets all requirements stipulated in this Contract and adjust the Object of Purchase to the place of delivery, if activated) necessary; to elaborate and results hand over to the Buyer operational, installation and maintenance manuals of the performance Object of Purchase and other documents that are necessary for the proper takeover and use of the Object of Purchase in English language in electronic form in the extent specified in Annex 2 (Technical Specification); to handover the declaration of conformity of the Object of Purchase with the approved standards; to elaborate a list of particular items of the Object of Purchase for the purposes of control; to provide training of competent persons, (I.) hardware training for two people and software training for two people in the extent of at least 10 hours, all maintenance servicing will be shown by Seller, Buyer is entitled to get audio and video recording; (II.) operator training in the Supplier similarly). 1.3 If extent of at least 8 hours which will be held after successful completion of Site Acceptance Test “SAT” at the place of delivery. The Seller promises to the Buyer that if for the fulfilment of the requirements of the Client Buyer under this Contract or for the proper operation of the Object of Purchase are necessary other deliveries and activities not expressly mentioned in this Contract, the Supplier Seller shall procure such deliveries or shall carry out such activities at its own expense without any effect on the Purchase Price. 1.4 During the performance of this Contract, the Client is entitled to further specify or clarify the requirements stipulated in Annex 2 (Detailed Technical Specification). Such further requirements can be requested by the Client no later than one month before the scheduled completion of the D2 Deliverable (for optomechanical mounts OM7, OM7.5, OM8, OM9 and SPM1 and for the motion control system MCTR) and of the D3 Deliverable for the optomechanical mount OOM1. These further requirements shall be binding for the Supplier. Under this provision, the Client is not entitled to substantially change the existing requirements stipulated in Annex 2 (Detailed Technical Specifications). Should any request for change result in increase of Purchase Price such request is binding for the Supplier only if the Purchase Price modification is agreed between Parties and such modification is in accordance with the Act No. 134/2016 Coll., on public contracts awarding, and binding rules of the Operational Program. 1.5 The Object of Purchase and its components and parts shall be delivered new (i.e. not remanufactured). 1.6 The final cleaning of all components, testing and verification of performance of the integrated mounts and integration of all instrumentation with the control system (MCTR) must not be performed by a subcontractor. 1.7 The Supplier shall perform this Contract in Deliverables defined in Annex 1 (Summary of Deliverables, Time Schedule and Payments).

BASIC PROVISIONS. 1.1 Under this Contract the Supplier shall: • develop (based on the detailed conceptual design provided by the Client) detailed design, manufacture, test and deliver Seller shall hand over to the Client 5 optomechanical mounts of large laser mirrors Buyer a metherological radar, which shall meet requirements listed in Annex 1 (identified as OM7, OM8, OM9, SPM1 and OOM1) • develop (based on the detailed conceptual design provided by the Client) detailed design Technical Description of the optomechanical mount Offered Performance) to this Contract (“Object of a large laser mirror identified Purchase”) and shall transfer to the Buyer ownership right to the Object of Purchase, and the Buyer shall take over the Object of Purchase and shall pay the Seller the Purchase Price (as OM7.5 2 a) hereofdefined below), all under the terms and conditions stipulated in this Contract. 1.2 The Under this Contract the Seller shall also carry out following contractual call in options are hereby agreed by the Parties:activities (“Related Activities”): a) optional manufacture, testing and delivery to verify that the Object of the optomechanical mount OM7.5 Purchase meets all requirements stipulated in accordance with this Contract and all its Annexes including Annex 1 (Summary adjust the Object of DeliverablesPurchase to the place of delivery, Time Schedule and Payments) (hereinafter ”Option 1”)if necessary; b) optional provision to elaborate and hand over to the Buyer operational and technical manual and software guide and other documents that are necessary for the proper takeover and use of extra design works up to 40 man-days according to the Object of Purchase in English language in electronic form in the extent specified in Annex 1 2 (Summary of Deliverables, Time Schedule and PaymentsTechnical Specifications); c) optional installation technical support up to 20 man-days according to Annex 1 (Summary handover the declaration of Deliverables, Time Schedule and Payments); (all options are referred to hereinafter together as the “Options”), (except for the Art. 8 hereof any provisions conformity of this Contract applicable on the Object of Purchase apply on with the performance approved standards, if there are any; d) to elaborate a list of particular items of the Options Object of Purchase for the purposes of control; e) to provide training of four competent persons, (if activatedI.) hardware training for four persons and results software training for six persons in the extent of at least 10 hours, all maintenance servicing will be shown by Seller, Buyer is entitled to get audio and video recordings; (II.) operator training in the performance by extent of at least 8 hours which will be held after successful completion of Site Acceptance Test “SAT” at Observatory Milešovka; f) ensure availability of spare parts for the Supplier similarlyradar system for period of years and ensure supply of spared parts for the radar for period of 7 years following the successful Site Acceptance Test; g) to provide detailed description of required radar site (e.g. description of required power supply, network connection, radar base). 1.3 If The Seller promises to the Buyer that if for the fulfilment fulfillment of the requirements of the Client Buyer under this Contract or for the proper operation of the Object of Purchase are necessary other deliveries and activities not expressly mentioned in this Contract, the Supplier Seller shall procure such deliveries or shall carry out such activities at its own expense without any effect on the Purchase Price. 1.4 During the performance of this Contract, the Client is entitled to further specify or clarify the requirements stipulated in Annex 2 (Detailed Technical Specification). Such further requirements can be requested by the Client no later than one month before the scheduled completion of the D2 Deliverable (for optomechanical mounts OM7, OM7.5, OM8, OM9 and SPM1 and for the motion control system MCTR) and of the D3 Deliverable for the optomechanical mount OOM1. These further requirements shall be binding for the Supplier. Under this provision, the Client is not entitled to substantially change the existing requirements stipulated in Annex 2 (Detailed Technical Specifications). Should any request for change result in increase of Purchase Price such request is binding for the Supplier only if the Purchase Price modification is agreed between Parties and such modification is in accordance with the Act No. 134/2016 Coll., on public contracts awarding, and binding rules of the Operational Program. 1.5 The Object of Purchase and its components and parts shall be delivered new (i.e. not remanufactured). 1.6 The final cleaning of all components, testing and verification of performance of the integrated mounts and integration of all instrumentation with the control system (MCTR) must not be performed by a subcontractor. 1.7 The Supplier shall perform this Contract in Deliverables defined in Annex 1 (Summary of Deliverables, Time Schedule and Payments).

BASIC PROVISIONS. 1.1 Under this Contract the Supplier shall: • develop (based on the detailed conceptual design provided by the Client) detailed design, manufacture, test and deliver Seller shall hand over to the Client 5 optomechanical mounts of large laser mirrors Buyer a Vertical Doppler Cloud Profiler, which shall meet requirements listed in Annex 1 (identified as OM7, OM8, OM9, SPM1 and OOM1) • develop (based on the detailed conceptual design provided by the Client) detailed design Technical Description of the optomechanical mount Offered Performance) to this Contract (“Object of a large laser mirror identified Purchase”) and shall transfer to the Buyer ownership right to the Object of Purchase, and the Buyer shall take over the Object of Purchase and shall pay the Seller the Purchase Price (as OM7.5 2 a) hereofdefined below), all under the terms and conditions stipulated in this Contract. 1.2 The Under this Contract the Seller shall also carry out following contractual call in options are hereby agreed by the Parties:activities (“Related Activities”): a) optional manufacture, testing and delivery to prepare manufacturing drawings of the optomechanical mount OM7.5 Object of Purchase as further described in accordance with this Contract and all its Annexes including Annex 1 2 (Summary of Deliverables, Time Schedule and Payments) (hereinafter ”Option 1”Technical Specification); b) optional provision to verify that the Object of extra design works up Purchase meets all requirements stipulated in this Contract and adjust the Object of Purchase to 40 man-days according to Annex 1 (Summary the place of Deliverablesdelivery, Time Schedule and Payments)if necessary; c) optional to elaborate and hand over to the Buyer operational, installation technical support up to 20 man-days according to Annex 1 (Summary and maintenance manuals of Deliverables, Time Schedule and Payments); (all options are referred to hereinafter together as the “Options”), (except for the Art. 8 hereof any provisions of this Contract applicable on the Object of Purchase apply on and other documents that are necessary for the performance proper takeover and use of the Options Object of Purchase in English language in electronic form in the extent specified in Annex 2 (if activatedTechnical Specification); d) and results to handover the declaration of conformity of the performance Object of Purchase with the approved standards, if there are any; e) to elaborate a list of particular items of the Object of Purchase for the purposes of control; f) to provide training of competent persons, (I.) hardware training for two people and software training for two people in the extent of at least 10 hours, all maintenance servicing will be shown by Seller, Buyer is entitled to get audio and video recording; (II.) operator training in the Supplier similarly)extent of at least 8 hours which will be held after successful completion of Site Acceptance Test “SAT” at Observatory Milešovka. 1.3 If The Seller promises to the Buyer that if for the fulfilment fulfillment of the requirements of the Client Buyer under this Contract or for the proper operation of the Object of Purchase are necessary other deliveries and activities not expressly mentioned in this Contract, the Supplier Seller shall procure such deliveries or shall carry out such activities at its own expense without any effect on the Purchase Price. 1.4 During the performance of this Contract, the Client is entitled to further specify or clarify the requirements stipulated in Annex 2 (Detailed Technical Specification). Such further requirements can be requested by the Client no later than one month before the scheduled completion of the D2 Deliverable (for optomechanical mounts OM7, OM7.5, OM8, OM9 and SPM1 and for the motion control system MCTR) and of the D3 Deliverable for the optomechanical mount OOM1. These further requirements shall be binding for the Supplier. Under this provision, the Client is not entitled to substantially change the existing requirements stipulated in Annex 2 (Detailed Technical Specifications). Should any request for change result in increase of Purchase Price such request is binding for the Supplier only if the Purchase Price modification is agreed between Parties and such modification is in accordance with the Act No. 134/2016 Coll., on public contracts awarding, and binding rules of the Operational Program. 1.5 The Object of Purchase and its components and parts shall be delivered new (i.e. not remanufactured). 1.6 The final cleaning of all components, testing and verification of performance of the integrated mounts and integration of all instrumentation with the control system (MCTR) must not be performed by a subcontractor. 1.7 The Supplier shall perform this Contract in Deliverables defined in Annex 1 (Summary of Deliverables, Time Schedule and Payments).

BASIC PROVISIONS. 1.1 Under this Contract the Supplier shall: • develop (based on the detailed conceptual design provided by the Client) detailed design, manufacture, test and deliver Seller shall hand over to the Client 5 optomechanical mounts Buyer two systems (one of large laser mirrors type DFM 1 and one of type DFM 2) (identified including all accessories) that are described in Annex 1 (Technical Specification) to this Contract in the quality described therein (together as OM7“Objects of Purchase” and each separately as “Object of Purchase”) and shall transfer to the Buyer ownership right to the Object of Purchase, OM8and the Buyer shall take over the Object of Purchase and shall pay the Seller the Purchase Price (as defined below), OM9, SPM1 all under the terms and OOM1) • develop (based on the detailed conceptual design provided by the Client) detailed design of the optomechanical mount of a large laser mirror identified as OM7.5 2 a) hereof)conditions stipulated in this Contract. 1.2 The following contractual call in options are hereby agreed by Under this Contract the PartiesSeller shall also: a) optional manufacture, testing and delivery prepare manufacturing drawings of the optomechanical mount OM7.5 Object of Purchase as further described in accordance with this Contract and all its Annexes including Annex 1 (Summary of Deliverables, Time Schedule and Payments) (hereinafter ”Option 1”Technical Specification); b) optional provision provide all materials needed for the manufacturing of extra design works up to 40 man-days according to Annex 1 (Summary the Object of Deliverables, Time Schedule and Payments)Purchase; c) optional installation technical support up to 20 man-days according to Annex 1 (Summary of Deliverablesmanufacture, Time Schedule inspect, clean, test and Payments); (all options are referred to hereinafter together as the “Options”), (except for the Art. 8 hereof any provisions of this Contract applicable on assembly the Object of Purchase apply on in the performance extent specified in Annex 1 (Technical Specification); d) transport the Object of Purchase to the Options place of delivery; e) install and test the Object of Purchase at the place of delivery in accordance with Annex 1 (if activatedTechnical Specification); f) carry out training of ▇▇▇▇▇’s staff in the extent specified in Annex 1 (Technical Specification); g) to elaborate and results of hand over to the performance by the Supplier similarly). 1.3 If for the fulfilment of the requirements of the Client under this Contract or for the proper operation Buyer operational and maintenance manuals of the Object of Purchase are necessary other deliveries and activities not expressly mentioned in this Contract, the Supplier shall procure such deliveries or shall carry out such activities at its own expense without any effect on the Purchase Price. 1.4 During the performance of this Contract, the Client is entitled to further specify or clarify the requirements stipulated in Annex 2 (Detailed Technical Specification). Such further requirements can be requested by the Client no later than one month before the scheduled completion of the D2 Deliverable (for optomechanical mounts OM7, OM7.5, OM8, OM9 and SPM1 and for the motion control system MCTR) and of the D3 Deliverable for the optomechanical mount OOM1. These further requirements shall be binding for the Supplier. Under this provision, the Client is not entitled to substantially change the existing requirements stipulated in Annex 2 (Detailed Technical Specifications). Should any request for change result in increase of Purchase Price such request is binding for the Supplier only if the Purchase Price modification is agreed between Parties and such modification is in accordance with the Act No. 134/2016 Coll., on public contracts awarding, and binding rules of the Operational Program. 1.5 The Object of Purchase and its components and parts shall be delivered new (i.e. not remanufactured). 1.6 The final cleaning of all components, testing and verification of performance of the integrated mounts and integration of all instrumentation with the control system (MCTR) must not be performed by a subcontractor. 1.7 The Supplier shall perform this Contract in Deliverables defined extent specified in Annex 1 (Summary Technical Specification) or other documents which are necessary for the proper takeover and use of Deliverables, Time Schedule and Paymentsthe Object of Purchase in Czech or English language; h) carry out other activities specified in Annex 1 (Technical Specification); and i) cooperate with the Buyer during the performace of this Contract (“Related Activities”).

BASIC PROVISIONS. 1.1 Under this Contract the Supplier shall: • develop Seller shall deliver and install for the Buyer a device as described and defined in Annex 1 (based on Technical Specification) and Annex 2 (Seller´s bid) to this Contract in the detailed conceptual design provided by required quality, and with the Clientproperties and related performance described therein („Object of Purchase”) detailed design, manufacture, test and deliver shall transfer to the Client 5 optomechanical mounts Buyer ownership right to the Object of large laser mirrors Purchase, and the Buyer, shall take over the Object of Purchase and shall pay the Seller the Purchase Price (identified as OM7defined below), OM8, OM9, SPM1 all under the terms and OOM1) • develop (based on the detailed conceptual design provided by the Client) detailed design of the optomechanical mount of a large laser mirror identified as OM7.5 2 a) hereof)conditions stipulated in this Contract. 1.2 The Under this Contract the Seller shall also carry out the following contractual call in options are hereby agreed by the Parties:activities („Related Activities”): a) optional manufacture, testing Transport and delivery the Object of Purchase to the optomechanical mount OM7.5 in accordance with this Contract and all its Annexes including Annex 1 place of delivery (Summary of Deliverables, Time Schedule and Payments) (hereinafter ”Option 1”Art. 2.3 hereof); b) optional provision Provide the re-usable package containing the Object of extra design works up Purchase for delivery to 40 manthe place of delivery (Art. 2.3 hereof) with shockwatch indicator and tip-days according to Annex 1 (Summary of Deliverables, Time Schedule and Payments)n-tell indicator; c) optional installation technical support up to 20 man-days according to Annex 1 (Summary Performance of Deliverables, Time Schedule and Payments); (all options are referred to hereinafter together as the “Options”), (except for the Art. 8 hereof any provisions of this Contract applicable on the Object of Purchase apply on the performance of the Options (if activated) and results of the performance by the Supplier similarly). 1.3 If for the fulfilment of the requirements of the Client under this Contract or for the proper operation Site Acceptance Test of the Object of Purchase are necessary other deliveries Purchase; d) Prepare and activities not expressly mentioned handover the Installation manuals, in this ContractEnglish in reproducible form – in advance of delivery/after design review; e) Provide the Buyer with the Operating and Maintenance manuals, in English in reproducible form, the Supplier shall procure such deliveries or shall carry copies of source code for any software, Lifting certificates (in English), a list of critical spares; f) Carry out such activities agendas and minutes of kick off, technical meetings and design reviews/approvals; g) Provide the Buyer with full documentation of the control system including details of the API with a list of the protocols and examples of their usage; h) Provide the Buyer with a certificate of conformity for CE marking; i) Provide the Buyer with Factory Acceptance Test (FAT) and Site Acceptance Test (SAT) documents – templates and testing procedures to be provided at its own expense without any effect on least one (1) month prior to the Purchase Price.testing; and 1.4 During j) Cooperate with the Buyer anytime during the performance of this Contract, the Client is entitled to further specify or clarify the requirements stipulated in Annex 2 (Detailed Technical Specification). Such further requirements can be requested by the Client no later than one month before the scheduled completion of the D2 Deliverable (for optomechanical mounts OM7, OM7.5, OM8, OM9 and SPM1 and for the motion control system MCTR) and of the D3 Deliverable for the optomechanical mount OOM1. These further requirements shall be binding for the Supplier. Under this provision, the Client is not entitled to substantially change the existing requirements stipulated in Annex 2 (Detailed Technical Specifications). Should any request for change result in increase of Purchase Price such request is binding for the Supplier only if the Purchase Price modification is agreed between Parties and such modification is in accordance with the Act No. 134/2016 Coll., on public contracts awarding, and binding rules of the Operational Program. 1.5 The Object of Purchase and its components and parts shall be delivered new (i.e. not remanufactured). 1.6 The final cleaning of all components, testing and verification of performance of the integrated mounts and integration of all instrumentation with the control system (MCTR) must not be performed by a subcontractor. 1.7 The Supplier shall perform this Contract in Deliverables defined in Annex 1 (Summary of Deliverables, Time Schedule and Payments).