A.5 Sample Clauses

A.5 c.) The writers entitled to separation of rights in a theatrical motion picture must be paid not less than the following one-time sequel payment for each direct-to-video sequel produced and distributed: Effective 5/2/14 – 5/1/15 $ 11,708 5/2/15 – 5/1/17 11,884 OTHER TELEVISION COMPENSATION UPSET PRICE (ARTICLE 16.B.5.) In the event Company pays not less than the following “upset price” to each writer or team of two (2) writers entitled to separated rights for the writing or acquisition of literary material to which separation of rights applies, the Company may bargain freely with the writers with respect to the acquisition of the writer’s reserved rights. Effective Effective 5/2/14- 5/2/15- INITIAL COMPENSATION OF AT LEAST: 5/1/15 5/1/17 Format Only $ 28,966 $ 29,400 Story Only 15 minutes or less 10,076 10,227 30 minutes or less 17,930 18,199 45 minutes or less 25,482 25,864 60 minutes or less 31,568 32,042 90 minutes or less 43,441 44,093 More than 90 minutes 43,441 44,093 Story and Teleplay 15 minutes or less 30,273 30,727 30 minutes or less 53,804 54,611 45 minutes or less 63,870 64,828 60 minutes or less 79,119 80,306 90 minutes or less 114,655 116,375 More than 90 minutes 114,655 116,375 Format, Story and Teleplay 15 minutes or less 30,273 30,727 30 minutes or less 53,804 54,611 45 minutes or less 63,870 64,828 60 minutes or less 79,119 80,306 90 minutes or less 114,655 116,375 More than 90 minutes 114,655 116,375 Bible 73,218 74,316 When the upset price has been paid, the rights acquired after negotiation shall be set forth in a separate contract. The separate agreement for acquisition of the reserved rights shall state a separate consideration (other than the consideration for the original employment or purchase); only the amount of initial compensation shall be used in determining whether the upset price has been reached. If you have any questions, contact the Guild Contracts Department. OTHER TELEVISION COMPENSATION & COMMISSIONS CHARACTER "SPIN-OFF" PAYMENTS (ARTICLE 15.B.14.h.(1)) Character "Spin-off" payments equal to the above sequel payments are payable to the writer who introduces a new character in a serial, episodic, anthology or one-time show if such character becomes the central character in a new serial or episodic series.
Sample 1Sample 2
AutoNDA by SimpleDocs
A.5 c.) The writers entitled to separation of rights in a theatrical motion picture must be paid not less than the following one-time sequel payment for each direct-to-video sequel produced and distributed: Effective CHARACTER "SPIN-OFF" PAYMENTS (ARTICLE 15.B.14.h.(1)) Character "Spin-off" payments equal to the above series sequel payments are payable to the writer who introduces a new character in a serial, episodic, anthology or one-time show if such character becomes the central character in a new serial or episodic series.
Sample 1Sample 2
A.5 c.) The writers entitled to separation of rights in a theatrical motion picture must be paid not less than the following one-time sequel payment for each direct-to-video sequel produced and distributed: Effective 5/2/11 – 5/1/12 $ 11,309 5/2/12 – 5/1/13 11,507 5/2/13 – 5/1/14 11,708 OTHER TELEVISION COMPENSATION & COMMISSIONS CHARACTER "SPIN-OFF" PAYMENTS (ARTICLE 15.B.14.h.(1)) Character "Spin-off" payments equal to the above sequel payments are payable to the writer who introduces a new character in a serial, episodic, anthology or one-time show if such character becomes the central character in a new serial or episodic series.
Sample 1
A.5. In the event that such dividend or distribution is not so paid or made, each Fixed Settlement Rate shall again be adjusted to be the Fixed Settlement Rate which would then be in effect if such dividend or distribution had not been declared.
Sample 1

Related to A.5

  • Irrigation The City shall provide water to the Premises for the purpose of irrigating the facility. The City specifically reserves the right to restrict water usage under this Agreement if water restrictions are placed on other water users within the City. Prior to the start of the season, City will provide charge up and run through the automatic irrigation systems to check for proper operation. City will provide Lessee with a radio for remote operation of the irrigation system, which Lessee shall use for the day to day maintenance, repair, and monitoring of the irrigation system. If the radio is lost, stolen, broken, or is rendered unusable, Lessee shall pay $1500 for the replacement radio. City is responsible for the maintenance and repair of the following irrigation elements, to the extent applicable: curb stops, backflow prevention devices, backflow enclosures, main line pipings, electric control valves, and controllers. Lessee shall notify Parks Division Water managers by email if any of these irrigation elements are malfunctioning or broken.

  • DS3 Loop DS3 Loop is a two-point digital transmission path which provides for simultaneous two-way transmission of serial, bipolar, return-to-zero isochronous digital electrical signals at a transmission rate of 44.736 megabits per second (Mbps) that is dedicated to the use of the ordering CLEC in its provisioning of local exchange and associated exchange access services. It may provide transport for twenty-eight (28) DS1 channels, each of which provides the digital equivalent of twenty-four (24) analog voice grade channels. The interface to unbundled dedicated DS3 transport is a metallic-based electrical interface.

  • Maintenance Plan Maintenance plan for the Project Facility for the next quarter and a report on maintenance carried out during the previous quarter (including any material deviation from expected maintenance activities as set out in the maintenance plan).

  • Rubric The rubrics are a scoring tool used for the Educator’s self-assessment, the formative assessment, the formative evaluation and the summative evaluation. The districts may use either the rubrics provided by ESE or comparably rigorous and comprehensive rubrics developed or adopted by the district and reviewed by ESE.

  • Maintenance Programme 17.4.1 On or before COD and no later than 45 (forty five) days prior to the beginning of each Accounting Year during the Operation Period, as the case may be, the Concessionaire shall provide to the Authority and the Independent Engineer, its proposed annual programme of preventive, urgent and other scheduled maintenance (the “Maintenance Programme”) to comply with the Maintenance Requirements, Maintenance Manual and Safety Requirements. Such Maintenance Programme shall include:

  • Prescription Safety Glasses Prescription safety glasses will be furnished by the employer. The employer retains the authority to establish reasonable rules and procedures regarding frequency of issue, replacement of damaged glasses, limits on reimbursement costs and coordination with the employer's vision plan.

  • Equipment Procurement If responsibility for construction of the Connecting Transmission Owner’s Attachment Facilities or System Upgrade Facilities or System Deliverability Upgrades is to be borne by the Connecting Transmission Owner, then the Connecting Transmission Owner shall commence design of the Connecting Transmission Owner’s Attachment Facilities or System Upgrade Facilities or System Deliverability Upgrades and procure necessary equipment as soon as practicable after all of the following conditions are satisfied, unless the Developer and Connecting Transmission Owner otherwise agree in writing:

  • Scratches (Q) appliance malfunctions and any resultant leak there from; (R) any stain, soiling or damage resulting from everyday use or which has built up over time, e.g. hair, body or suntan oils and/or lotions; (S) signs of soiling include darkened areas where the body comes into contact with the furniture (these darkened areas are signs of soil build-up, which is not covered); (T) general maintenance and overall cleaning of the furniture is the consumer’s responsibility; (U) damage due to harsh or corrosive chemicals; (V) acids, including without limitation, dyes and inks (except ballpoint), plant food and fertilizer and bleach, gum; (W) any non-operating part or decorative parts such as hinges, knobs, handles, or shelves; (X) coverage under another insurance program; (Y) delivery and/or redelivery and/or loss or damage to the Covered Product while in the course of transit; (Z) design deficiency; (AA) fabrics with “X” cleaning codes and non-colorfast fabrics and leathers; (AB) odors; (AC) variation of the color, or graining of wood or wood products, marble or leather; (AD) split leathers used in seat cushions, back cushions or top or inside arm areas; (AE) natural markings on leather, such as, healed scars, insect bites, brand marks or wrinkles, or suede, and leathers with embossed patterns other than those stimulating natural cowhide; (AF) non- bovine leathers, and other buffed leathers; (AG) stains, color loss or damage resulting from cleaning methods or products (detergents, abrasives or other harsh cleaning agents) other than those recommended by the furniture manufacturer; (AH) stone or sand abrasion; (AI) loss or damage resulting from: pre-existing conditions known to You; (AJ) wear related issues, such as but not limited to, fading, wear, seam separation, stress tears, loss of foam resiliency, pilling or fraying of any fabric on all types of furniture; (AK) color loss or cracking and peeling on any leather or vinyl; (AL) splits or bi-cast leather; (AM) furniture that is used for commercial, institutional, outdoor or rental purposes; (AN) Customer’s Own Material furniture; (AO) wicker, rattan, and teakwood furniture; (AP) massage chairs; (AQ) stains or damage to suede, split-grain leather hide or exotic leathers; (AR) manufacturer quality issues such as stress tears, fabric flaws, fading, color loss or change, loss of foam or resiliency, cracking and peeling of leather or vinyl, natural leather markings, and defects in design and workmanship; (AS) Stains or damage that occur during assembly, delivery, installation, before furniture is delivered to your residence, while the furniture is located outside of your residence, while the furniture is in storage or being moved to or from storage or between residences; (AT) Wear & Tear caused by repeated use such as scuffing, soiling, hair/body oil, perspiration, surface abrasions, pilling or fraying of fabric, loose joints; (AU) Stains or damage covered under any manufacturer warranty, recall, homeowner, renter or other insurance policy; (AV) Stains or damage caused by structural problems, appliance malfunctions, Acts of God or natural disasters, theft, vandalism or illegal activity (AW) Stains or damage caused by independent contractors Specific to Home Automation: In additional to the exclusions listed above, this Agreement does not cover any loss, repairs or damage caused by or resulting from: (A) pre-existing conditions incurred or known to you (pre-existing means a condition prior to Plan issuance); (B) any repair covered by a manufacturer’s warranty or any insurance; (C) installation, or improper installation; or improper installation of customer replaceable components, modules, parts or peripherals; (D) damage or failure due to causes beyond our control such as environmental conditions, exposure to weather conditions or acts of nature including, but not limited to: fire, floods, smoke, sand, dirt, lightning, moisture, water damage, freezes, storms, wind, windstorm, hail, earthquake, animal or insect infestation, etc.; (E) damage or failure caused by riot, nuclear radiation, war, hostile action, or radioactive contamination, etc.; (F) battery failure or leakage; (G) collision, collapse, or explosion; (H) liquid spillage of any kind; (I) signal reception, transmission problems resulting from external causes, interruption of electrical service, loss of power, improper use of electrical/power, power “brown-out”, power overload or power surge (unless covered in the Special Features section of this document); (J) neglect, misuse, abuse, intentional damage, malicious mischief, theft, mysterious disappearance, vandalism or accidental damage; damage cause by dropping (K) rust, corrosion, warping, bending, etc.; (L) damage, warping, bending or rusting of any kind to the housing, cabinetry, outside casing or frame of the product; (M) any non-operating part, including but not limited to plastic, or decorative parts such as hinges, knobs, door liners, glass, handles, masks, rack rollers, shelves, etc.; (N) loss of or repair to components within the product not originally covered by the manufacturer’s warranty; (O) failure to product attachments not provided by the manufacturer or included in the original sale;

  • CFR 164 504(e)(2)(ii)(G)

  • DISTRIBUTION OF CONTRACTOR PRICE LIST AND CONTRACT APPENDICES Contractor shall provide Authorized Users with electronic copies of the Contract, including price lists and Appendices, upon request. OGS CENTRALIZED CONTRACT MODIFICATIONS Contract Updates will be handled as provided in Appendix C – Contract Modification Procedures.

Time is Money Join Law Insider Premium to draft better contracts faster.