Zero point definition

Zero point. ’ means the point of application of the pilot burner to the test specimen.
Zero point. ’ means the point of application
Zero point. ’ means the point of applica- tion of the pilot burner to the test specimen.

Examples of Zero point in a sentence

  • In case of non-metered water supply by UGVCL, the recovery of water charges will be made by UGVCL at 0.5% (Zero point five percent) of total cost of actual work done as per work order.

  • Zero point data for extractive instruments should be obtained by removing the extractive probe from the stack and drawing in clean ambient air.

  • Zero point data for in-situ instruments should be obtained by removing the instrument from the stack and monitoring ambient air on a test bench.

  • A penalty of 0.5% (Zero point five percent) per week of the contract value will be levied for delay in response time for attending and rectification of faults beyond specified time during the warranty period as detailed above.

  • In case of any delay/default, of the Contractor/ Bidder to adhere to the agreed time schedule, PIIC shall recover the liquidated damages from the Contractor/ Bidder at the rate of 0.5% (Zero point Five percent) of the total amount of fee per week of delay of any activity subject to a maximum of 5% (Five percent) of the total order value.

  • When observing a wrestling action, the referee and judge award the points, cautions, indicated below which, in each of the cases put forward, provides the following result: R: Red wrestler – B: Blue wrestler – 0: Zero point In the event of any flagrant violation of the Rules, the mat chairman must call for a consultation.

  • In the event that remedial measures are not completed by the Concessionaire in conformity with the provisions of this Agreement, the PMU/ Authority shall be entitled to recover Damages from the Concessionaire at the rate of 0.1% ( Zero point One percentage) of Performance Security for each day of delay beyond the period specified for rectification of such defect or deficiency by the PMU/ Authority.

  • A maximum period of 2 (two) weeks will be allowed for attending and rectification of faults during the warranty period.(b) Maximum down time during the warranty period will be 2% (two percent) for on line M&P and 10% (ten percent) for off line M&P calculated on quarterly basis.(c) A penalty of 0.5% (Zero point five percent) per week of the contract value will be levied for delay in response time for attending and rectification of faults beyond specified time during the warranty period as detailed above.

  • Marks (40% of project length) or more in last 7 years.1 project - 4 marksAdd 0.5 (Zero point five) marks extra for each additional project subject to maximum 2 marks.

  • When they come and we will just pause, those of us who are speaking, and let you hear from them.

Related to Zero point

  • H-point means the pivot centre of the torso and thigh of the H-point machine when installed in a vehicle seat in accordance with Annex 12. Once determined in accordance with the procedure described in Annex 12, the "H" point is considered fixed in relation to the seat-cushion structure and is considered to move with it when the seat is adjusted.

  • R-point means a reference point defined for each seat by the manufacturer in relation to the vehicle's structure, as indicated in Annex 6 to Regulation No.94

  • Demarcation Point means the point where Qwest owned or controlled facilities cease, and CLEC, End User Customer, premises owner or landlord ownership or control of facilities begin. "Designed, Verified and Assigned Date" or "DVA" means the date on which implementation groups are to report that all documents and materials have been received and are complete.

  • Focal point means the entity of a Party referred to in Article 5 responsible for receiving and submitting information as provided for in Articles 13 and 16;

  • Flash point means the lowest temperature of a liquid at which its vapours form a flammable mixture with air;

  • Meet Point A point, designated by the Parties, at which one Party’s responsibility for service begins and the other Party’s responsibility ends.

  • Exit Point means a border control post or any other place designated by a Member State where animals, falling within the scope of Regulation (EC) No 1/2005, leave the customs territory of the Union;

  • Metering Point means, for meters that do not use instrument transformers, the point at which the billing meter is connected. For meters that use instrument transformers, the point at which the instrument transformers are connected.

  • Cogeneration unit means a unit that is able to operate in cogeneration mode;

  • Measurement Point means the emission source for which continuous emission measurement systems (CEMS) are used for emission measurement, or the cross-section of a pipeline system for which the CO2 flow is determined using continuous measurement systems;

  • Service Point the place at which the Services are to be performed.

  • Destination Point means the delivery point(s) on Carrier’s System where Product is delivered to Shipper, as such points are specified in Section III of this tariff.

  • Chemical Storage Facility means a building, portion of a building, or exterior area adjacent to a building used for the storage of any chemical or chemically reactive products.

  • Supply Point means the point of connection between the licensed network and your apparatus or equipment.

  • Generation Unit means a facility that converts a fuel or an energy resource into electrical energy.

  • Service Switching Point (SSP) is a telephone central office switch equipped with a Signaling System 7 (SS7) interface.

  • connecting point means the point at which the drainage installation joins the connecting sewer;

  • High global warming potential hydrofluorocarbons means any hydrofluorocarbons in a particular end use for which EPA’s Significant New Alternatives Policy (SNAP) program has identified other acceptable alternatives that have lower global warming potential. The SNAP list of alternatives is found at 40 CFR part 82, subpart G, with supplemental tables of alternatives available at (http://www.epa.gov/snap/ ).

  • border crossing point means any crossing-point authorised by the competent authorities for the crossing of external borders;

  • Interconnection Point means the point(s) of connection(s) at which the project is connected to the grid i.e. it shall be at 11 / 22 kV bus bar level of substation of MSEDCL.

  • Injection Point means the Electric Interconnection Point.

  • Signaling Transfer Point (“STP”) means a signaling point that performs message routing functions and provides information for the routing of messages between signaling points within or between CCIS networks. An STP transmits, receives and processes CCIS messages.

  • Rechargeable Electrical Energy Storage System (REESS) means the rechargeable energy storage system that provides electric energy for electrical propulsion.

  • Electric generation service means the provision of retail

  • Ultra Low Sulfur Diesel Fuel means diesel fuel that has a sulfur content of no more than fifteen parts per

  • Service Switching Point (SSP means the telephone Central Office Switch equipped with a Signaling System 7 (SS7) interface.