Utility Interface definition

Utility Interface means the metering facilities, conduit, power transmission lines, valves, electrical substations and any other equipment necessary to interconnect the Conversion System or systems with the transmission lines or other facilities needed to transport the Covered Products to the Customer.
Utility Interface means all equipment and facilities installed to deliver electric energy produced by the Cogeneration Facility to the City, or the Utility Company or any other energy customer of the Cogenerator, including, but not limited to, any step- up transformer, metering facilities, protection circuitry and relays, transmission lines, poles, pipelines and any other equipment necessary to interconnect the Cogeneration Facility with the grid of either the public utility in whose franchise area the Cogeneration Facility Site is located or the electric power purchaser to which the electric power is sold directly.
Utility Interface. – means interconnection between the small- scale renewable generating facility/system and the utility distribution network, the PUC or point of common coupling.

Examples of Utility Interface in a sentence

  • Special attention should be given to IEEE Standard 929-2000 Recommended Practice for Utility Interface of Photovoltaic Systems.

  • IEEE Std 100-2000, “IEEE Standard Dictionary of Electrical and Electronic Terms” IEEE Std 519-1992, “IEEE Recommended Practices and Requirements for Harmonic Control in Electric Power Systems” IEEE Std 929-2000,”IEEE Recommended Practice for Utility Interface of Photovoltaic (PV) Systems”.

  • IEC 60364-7-712: Electrical Installations of Buildings: Requirements for Solar PV power supply systems.2. IEC 61727 or similar: Utility Interface Standard for PV power plants > 10 kW.3. IEC 62103, 62109 and 62040 (UL 1741): Safety of Static Inverters – Mechanical and Electrical safety aspects.4. IEC 62116: Testing procedure of Islanding Prevention Methods for Utility-Interactive PV Inverters.5. PV Modules : IEC 61730- Safety qualification testing, IEC 61701 – Operation in corrosive atmosphere6.

  • IEEE 929-2000 (withdrawn) Prior to the completion of IEEE 1547, IEEE 929-2000 (Recommended Practice for Utility Interface of Photovoltaic (PV) Systems) was the definitive interconnection document.

  • In the 1980s, IEEE published ANSI/IEEE Std 929-1988, IEEE Recommended Practice for Utility Interface of Residential and Intermediate Photovoltaic (PV) Systems.

  • IEEE 929 – (Recommended Practice for Utility Interface of Photovoltaic (PV) Systems latest published edition) IEEE 1547 – (Standard for Interconnecting Distributed Resources with Electric Power Systems, June 12, 2003 or latest published edition).

  • IEEE 929 – (Recommended Practice for Utility Interface of Photovoltaic (PV) Systems, latest published edition) IEEE 1547 – (Standard for Interconnecting Distributed Resources with Electric Power Systems, latest published edition).

  • If Photovoltaic System, System must be installed in compliance with IEEE Standards, Recommended Practice for Utility Interface of Photovoltaic Systems.

  • For Facilities that utilize photovoltaic (PV) technology, it is required that the system be installed in compliance with IEEE Standard 929-2000, “IEEE Recommended Practice for Utility Interface of (PV) Systems”.

  • IEEE 929 – (Recommended Practice for Utility Interface of Photovoltaic (PV) Systems, latest published edition) IEEE 1547 – (Standard for Interconnecting Distributed Resources with Electric Power Systems, June 12, 2003 or latest published edition).


More Definitions of Utility Interface

Utility Interface means all equipment and facilities installed to deliver electric energy produced by the North City Cogeneration Facility or the City-Developed North City Expansion Project to the City, the Utility Company or any other energy customer of the Cogenerator or the City, including, but not limited to, any step-up transformer, metering facilities, protection circuitry and relays, transmission lines, poles, pipelines and any other equipment necessary to interconnect the Cogeneration Facility and the City-Developed North City Expansion Project with the grid of either the public utility in whose franchise area the North City Cogeneration Facility Site is located or the electric power purchaser to which the electric power is sold directly.
Utility Interface means all equipment and facilities installed to deliver electric energy produced by the North City Cogeneration Facility or the
Utility Interface means all equipment and facilities installed to deliver electric energy produced by the North City Cogeneration Facility or the City-Developed North City Expansion Project to the City, the Utility Company or any other energy customer of the Cogenerator or the City, including, but not limited to, any step-up transformer, metering facilities, protection circuitry and relays, transmission lines, poles, pipelines and any other 971767.3 7 equipment necessary to interconnect the Cogeneration Facility and the City-Developed North City Expansion Project with the grid of either the public utility in whose franchise area the North City Cogeneration Facility Site is located or the electric power purchaser to which the electric power is sold directly.
Utility Interface means all equipment and facilities installed to deliver electric energy produced by the Phase III Cogeneration Facility to the Navy, or the Utility Company or any other energy customer of the Phase III Cogeneration Facility Contractor, including, but not limited to, any step-up transformer, metering facilities, protection circuitry and relays, transmission lines, poles, pipelines and any other equipment necessary to interconnect the Phase III Cogeneration Facility with the grid of either the public utility in whose franchise area the Phase III Cogeneration Facility Site is located or the electric power purchaser to which the electric power is sold directly.

Related to Utility Interface

  • Utility system means a water system, solid waste

  • Utility vehicle means a motor vehicle that is (i) designed for off-road use, (ii) powered by an

  • Electrical equipment means underground equipment that contains dielectric fluid that is necessary for the operation of equipment such as transformers and buried electrical cable.

  • Utility Installations is used in this Lease to refer to all air lines, power panels, electrical distribution, security, fire protection systems, communications systems, lighting fixtures, heating, ventilating and air conditioning equipment, plumbing, and fencing in, on or about the Premises. The term "TRADE FIXTURES" shall mean Lessee's machinery and equipment which can be removed without doing material damage to the Premises. The term "ALTERATIONS" shall mean any modification of the improvements on the Premises which are provided by Lessor under the terms of this Lease, other than Utility Installations or Trade Fixtures. "LESSEE-OWNED ALTERATIONS AND/OR UTILITY INSTALLATIONS" are defined as Alterations and/or Utility Installations made by Lessee that are not yet owned by Lessor pursuant to Paragraph 7.4(a). Lessee shall not make nor cause to be made any Alterations or Utility Installations in, on, under or about the Premises without Lessor's prior written consent. Lessee may, however, make non-structural Utility Installations to the interior of the Premises (excluding the roof) without Lessor's consent but upon notice to Lessor, so long as they are not visible from the outside of the Premises, do not involve puncturing, relocating or removing the roof or any existing walls, or changing or interfering with the fire sprinkler or fire detection systems and the cumulative cost thereof during the term of this Lease as extended does not exceed $2,500.00.

  • Interconnection equipment means a group of components or an integrated system owned and operated by the interconnection customer that connects an electric generator with a local electric power system, as that term is defined in Section 3.1.6.2 of IEEE Standard 1547, or with the electric distribution system. Interconnection equipment is all interface equipment including switchgear, protective devices, inverters or other interface devices. Interconnection equipment may be installed as part of an integrated equipment package that includes a generator or other electric source.

  • Large Facility Interconnection Procedures or “LFIP”) shall mean the interconnection procedures applicable to an Interconnection Request pertaining to a Large Generating Facility that are included in Attachment X of the NYISO OATT. Standard Large Generator Interconnection Agreement (“LGIA”) shall mean this Agreement, the form of interconnection agreement applicable to an Interconnection Request pertaining to a Large Generating Facility, that is included in Attachment X of the NYISO OATT. System Deliverability Upgrades shall mean the least costly configuration of commercially available components of electrical equipment that can be used, consistent with Good Utility Practice and Applicable Reliability Requirements, to make the modifications or additions to Byways and Highways and Other Interfaces on the existing New York State Transmission System and Distribution System that are required for the proposed project to connect reliably to the system in a manner that meets the NYISO Deliverability Interconnection Standard at the requested level of Capacity Resource Interconnection Service. System Protection Facilities shall mean the equipment, including necessary protection signal communications equipment, required to (1) protect the New York State Transmission System from faults or other electrical disturbances occurring at the Large Generating Facility and (2) protect the Large Generating Facility from faults or other electrical system disturbances occurring on the New York State Transmission System or on other delivery systems or other generating systems to which the New York State Transmission System is directly connected. System Upgrade Facilities shall mean the least costly configuration of commercially available components of electrical equipment that can be used, consistent with Good Utility Practice and Applicable Reliability Requirements, to make the modifications to the existing transmission system that are required to maintain system reliability due to: (i) changes in the system, including such changes as load growth and changes in load pattern, to be addressed in the form of generic generation or transmission projects; and (ii) proposed interconnections. In the case of proposed interconnection projects, System Upgrade Facilities are the modifications or additions to the existing New York State Transmission System that are required for the proposed project to connect reliably to the system in a manner that meets the NYISO Minimum Interconnection Standard. Tariff shall mean the NYISO Open Access Transmission Tariff (“OATT”), as filed with the Commission, and as amended or supplemented from time to time, or any successor tariff. Trial Operation shall mean the period during which Developer is engaged in on-site test operations and commissioning of the Large Generating Facility prior to Commercial Operation.

  • Capacity Interconnection Rights means the rights to input generation as a Generation Capacity Resource into the Transmission System at the Point of Interconnection where the generating facilities connect to the Transmission System.

  • Utility Installation means carpeting, window coverings, air lines, power panels, electrical distribution systems, lighting fixtures, space heaters, air conditioning, plumbing, and fencing. Lessor may require that Lessee remove any or all of said alterations, improvements, additions or Utility Installations at the expiration of the term, and restore the Premises to their prior condition. Lessor may require Lessee to provide Lessor, at Lessee's sole cost and expense, a lien and completion bond in an amount equal to one and one-half times the estimated cost of such improvements, to insure Lessor against any liability for mechanic's and materialmen's liens and to insure completion of the work. Should Lessee make any alterations, improvements, additions or Utility Installations without the prior approval of Lessor, Lessor may require that Lessee remove any or all of the same.

  • Systems and Equipment means any plant (including any central plant), machinery, transformers, duct work, cable, wires, and other equipment, facilities, and systems designed to supply heat, ventilation, air conditioning and humidity or any other services or utilities, or comprising or serving as any component or portion of the electrical, gas, steam, plumbing, sprinkler, communications, alarm, lab, security, or fire/life safety systems or equipment, or any other mechanical, electrical, electronic, computer or other systems or equipment which serve the Building and/or any other building in the Project in whole or in part.

  • electrical installation means an electrical installation as defined in the Regulations;

  • Infrastructure Improvements means a street, road, sidewalk, parking facility, pedestrian mall, alley, bridge, sewer, sewage treatment plant, property designed to reduce, eliminate, or prevent the spread of identified soil or groundwater contamination, drainage system, waterway, waterline, water storage facility, rail line, utility line or pipeline, transit-oriented development, transit-oriented property, or other similar or related structure or improvement, together with necessary easements for the structure or improvement, owned or used by a public agency or functionally connected to similar or supporting property owned or used by a public agency, or designed and dedicated to use by, for the benefit of, or for the protection of the health, welfare, or safety of the public generally, whether or not used by a single business entity, provided that any road, street, or bridge shall be continuously open to public access and that other property shall be located in public easements or rights-of-way and sized to accommodate reasonably foreseeable development of eligible property in adjoining areas. Infrastructure improvements also include 1 or more of the following whether publicly or privately owned or operated or located on public or private property:

  • The Works/Project means the works to be executed or done under this contract.

  • Utility Services means physical plant including but not limited to pipes, valves, conduits, cables, terminals, transformers, etc. owned and operated by communications, television, hydro, gas and oil companies or any other utility companies.

  • Critical infrastructure means existing and proposed systems and assets, whether physical or virtual, the incapacity or destruction of which would negatively affect security, economic security, public health or safety, or any combination of those matters.++

  • Generator Maintenance Outage means the scheduled removal from service, in whole or in part, of a generating unit in order to perform necessary repairs on specific components of the facility, if removal of the facility meets the guidelines specified in the PJM Manuals.

  • Infrastructure improvement means permanent infrastructure that is essential for the public health and safety or that:

  • Electrical contractor means an electrical contractor as defined in the Regulations;

  • Security alarm system means a device or series of devices, intended to summon law enforcement personnel during, or as a result of, an alarm condition. Devices may include hard- wired systems and systems interconnected with a radio frequency method such as cellular or private radio signals that emit or transmit a remote or local audible, visual, or electronic signal; motion detectors, pressure switches, duress alarms (a silent system signal generated by the entry of a designated code into the arming station to indicate that the user is disarming under duress); panic alarms (an audible system signal to indicate an emergency situation); and hold-up alarms (a silent system signal to indicate that a robbery is in progress).

  • Standard Software means Software identified as such in Appendix 4 of the Contract Agreement and such other Software as the parties may agree in writing to be Standard Software.

  • Contractor Software means software which is proprietary to the Contractor, including software which is or will be used by the Contractor for the purposes of providing the Services.

  • Electric System Upgrades means any Network Upgrades, Distribution Upgrades, or Interconnection Facilities that are determined to be necessary by the CAISO or Participating Transmission Owner, as applicable, to physically and electrically interconnect the Project to the Participating Transmission Owner’s electric system for receipt of Energy at the Point of Interconnection (as defined in the CAISO Tariff) if connecting to the CAISO Grid, or the Interconnection Point, if connecting to a part of the Participating TO’s electric system that is not part of the CAISO Grid.

  • Utility pole means a pole that provides:

  • Quality improvement organization or “QIO” shall mean the organization that performs medical peer review of Medicaid claims, including review of validity of hospital diagnosis and procedure coding information; completeness, adequacy and quality of care; appropriateness of admission, discharge and transfer; and appropriateness of prospective payment outlier cases. These activities undertaken by the QIO may be included in a contractual relationship with the Iowa Medicaid enterprise.

  • Modular building manufacturer means a person or corporation who owns or operates a

  • Standard equipment means the basic configuration of a vehicle which is equipped with all the features that are required under the regulatory acts of the Contracting Party including all features that are fitted without giving rise to any further specifications on configuration or equipment level.

  • Telecommunications Equipment means equipment, other than Customer Premises Equipment, used by a Carrier to provide Telecommunications Services, and include software integral to such equipment, including upgrades.