Traceability system definition

Traceability system means the practical system of processes, procedures and information exchanges that implements traceability.
Sample 1Sample 2Sample 3
Traceability system means a system designed to track the location or transport of one or more of the following:
Sample 1
Traceability system means any relevant identification system, including, but not limited to, Gesvatec™ which may be used to identify licensed Product.
Sample 1

Examples of Traceability system in a sentence

  • Traceability system fully and properly demonstrate that farm sources were from BAP certified facilities only.

  • Traceability system relating to the finished product batch number and to raw materials used.

  • Indicate the existence of:Boolean (Yes/No)NationalSub-nationalPolicies supporting SFM Legislations and/or regulations supporting SFM Platform that promotes or allows for stakeholder participation in forest policy development Traceability system for wood products Table 6a does not require data input.

  • The office’s goals are as follows:• Design and evaluation of sanitary programs and their application;• Develop the National Traceability system in Food Industries;• Coordinate, supervise, and inspect food safety practices in the Nicaraguan food industry;• Train plant processors and provide technical assistance on Good Management Practices (GMPs), Sanitary Operating Procedures (SOP) and HACCP; and• Secure internationally recognized validation for stakeholder plants’ food safety procedures.

  • The goals of the CTP Program are to primarily support the mission and objectives of the NFIP’s Flood Hazard Mapping Program through FEMA’s flood hazard identification and risk assessment programs, including the Risk Mapping, Assessment and Planning (Risk MAP) initiative.

  • Traceability systems, some captures and processes examples Figure 7 Traceability system in Almeria (ERP Agro) 124 September, 2017 Int J Agric & Biol Eng Open Access at https://www.ijabe.org Vol.

  • Nordic Ecolabelling may revoke a licence if it becomes apparent that the quality requirements cannot be upheld.🖂 Item b) Traceability system for all wood and fibre raw materials.🖂 Item b) A documented procedure from the pulp/paper manufacturer that describes how the requirement is fulfilled.

  • Traceability system comprises two primary capabilities, the ability to track movements and to trace custody of a food product in the food chain.

  • Traceability system for capturing, processing and providing consumer-relevant information about wood products: system solu- tion and its economic feasibility.

  • To aid these engineers in their tasks, a Requirements Traceability system was developed to provide information on each sensor variant and also to support tenders for new sensors.

Related to Traceability system

  • traceability means the ability to trace and follow a food, feed, food-producing animal or substance intended to be, or expected to be incorporated into a food or feed, through all stages of production, processing and distribution;

  • Quality system means documented organizational procedures and policies: internal audits of those policies and procedures: management review and recommendation for quality improvement.”

  • Utility system means a water system, solid waste

  • E-Verify system means an Internet-based system operated by the United States Department of Homeland Security that allows participating employers to electronically verify the employment eligibility of newly hired employees; and

  • Web Site Accessibility Standards/Specifications means standards contained in Title 1 Texas Administrative Code Chapter 206.

  • Web Site Accessibility Standards/Specifications means standards contained in Title 1 Texas Administrative Code Chapter 206.

  • compatibility means compatibility as defined in point (10) of Article 2 of Directive (EU) 2019/770;

  • Vapor control system means a system that prevents release to the atmosphere of gasoline vapors in excess of 80 milligrams per liter of gasoline loaded (4.7 grains per liter).

  • Reliability Standard means a requirement to provide for reliable operation of the bulk power system, including without limiting the foregoing requirements for the operation of existing bulk power system facilities, including cybersecurity protection, and the design of planned additions or modifications to such facilities to the extent necessary for reliable operation of the bulk power system, but shall not include any requirement to enlarge bulk power system facilities or to construct new transmission capacity or generation capacity.

  • Permeability of a space means the ratio of the volume within that space which is assumed to be occupied by water to the total volume of that space.

  • Connectivity means the provision of a Permanent Separated Bicycle Lane system that reflects desired routes between all major origins and destinations in the city.

  • Control system means the combination of capture and control devices used to reduce emissions to the atmosphere.

  • 911 system means the set of network, database and customer premise equipment (CPE) components required to provide 911 service.

  • Analytical x-ray system means a group of components utilizing x-rays to determine the elemental composition or to examine the microstructure of materials.

  • Security System means the building access control system developed by Manager and known as the O.P.E.N.centrix - Open Platform for Essential Networks, which includes, without limitation, the Application Software, the firmware containing the Application Software, the O.P.E.N.cortex platform software and all hardware related thereto;

  • Structural components means liners, leachate collection systems, final covers, run-on/run-off systems, and any other component used in the construction and operation of the MSWLF that is necessary for protection of human health and the environment.

  • Interoperability means the ability of a CenturyLink OSS Function to process seamlessly (i.e., without any manual intervention) business transactions with CLEC's OSS application, and vice versa, by means of secure exchange of transaction data models that use data fields and usage rules that can be received and processed by the other Party to achieve the intended OSS Function and related response. (See also Electronic Bonding.)

  • Drug use test means a scientifically substantiated method to test for the presence of illegal or performance-enhancing drugs or the metabolites thereof in a person’s urine.

  • Ambient air quality standard means an established concentration, exposure time, and frequency of occurrence of air contaminant(s) in the ambient air which shall not be exceeded.

  • Leak-detection system means a system capable of detecting the failure of either the primary or secondary containment structure or the presence of a release of hazardous waste or accumulated liquid in the secondary containment structure. Such a system must employ operational controls (e.g., daily visual inspections for releases into the secondary containment system of aboveground tanks) or consist of an interstitial monitoring device designed to detect continuously and automatically the failure of the primary or secondary containment structure or the presence of a release of hazardous waste into the secondary containment structure.

  • Health system means: (A) A parent corporation of one or more hospitals and any entity affiliated with such parent corporation through ownership, governance, membership or other means, or (B) a hospital and any entity affiliated with such hospital through ownership, governance, membership or other means;

  • Standard Methods for the Examination of Water and Wastewater means the most recent edition of Standard Methods for the Examination of Water and Wastewater published jointly by the American Public Health Association, the American Waterworks Association and the Water Environment Federation;

  • Contractor Software means software which is proprietary to the Contractor, including software which is or will be used by the Contractor for the purposes of providing the Services.

  • Delivery System means the design and construction

  • Quality Management System means a set of interrelated or interacting elements that organisations use to direct and control how quality policies are implemented and quality objectives are achieved;

  • Cabinet x-ray system means an x-ray system with the x-ray tube installed in an enclosure independent of existing architectural structures except the floor on which it may be placed. The cabinet x-ray system is intended to contain at least that portion of a material being irradiated, provide radiation attenuation, and exclude personnel from its interior during generation of radiation. Included are all x-ray systems designed primarily for the inspection of carry-on baggage at airline, railroad, and bus terminals, and in similar facilities. An x-ray tube used within a shielded part of a building, or x-ray equipment that may temporarily or occasionally incorporate portable shielding, is not considered a cabinet x-ray system.