Testing Frequency definition

Testing Frequency. (For English version see ACI 301-84, Chapter 16). o The steel reinforcement will be 47,000 psi (4,200 Kg/Cm2). Everything under this section will be performed according to the drawings for this work.
View Source

Examples of Testing Frequency in a sentence

  • Sampling and Testing Frequency: Each facility may use its own schedule and strategy for sampling and analytical testing, or a schedule and strategy in accordance with the requirements, if any, of the jurisdiction where they are located.

  • Testing Frequency: Obtain at least one composite sample for each 100 cu.

  • Testing Frequency: Obtain one composite sample for each day's pour of each concrete mixture exceeding 5 cu.

  • Test Properties, Testing Frequency and Recommended Warranty for High Density Polyethylene (HDPE) Smooth and Textured Geomembranes.

  • Nondestructive Testing: Frequency and acceptance criteria as specified in Section 05050.

  • Inspection and Testing shall generally follow the latest “Sampling and Testing Frequency Chart”, Appendix A of the KDOT Construction Manual, unless otherwise indicated below or as part of the Special Provisions.

  • The following adjustments to the KDOT Construction Manual “Sampling and Testing Frequency Charts” shall apply to each bridge: One set of 3 cylinders shall be made each day concrete is placed for Drilled Shafts, ▇▇▇▇ ▇▇▇▇▇▇▇, ▇▇▇▇ ▇▇▇▇ and Abutments, (e.g., if pier columns and abutment(s) are poured on the same day at the same bridge, a separate 3 cylinder set shall be cast) A minimum of four sets of 3 cylinders shall be made for each day a deck pour occurs.

  • Test Testing Frequency Premium Choice Grade Bactoscan Minimum Twice per month <80,000 80,001 – 150,000 150,001- 300,000 BMCC Per consignment <300,000 300,000 – 400,000 400,001 – 600,000 Inhibitory Substances Per consignment Negative Negative Positive Thermoduric Beston discretion <=2,000 2,001 – 5,000 5,001 – 10,000 Freezing Point Beston discretion >0.517⁰C >0.517⁰C <-0.517⁰C Sediment Beston discretion ▇▇▇▇ ▇▇▇▇ FAIL Quality Payment Penalty 0% -5% -20% Bactoscan is tested at a minimum of twice a month.

  • Testing Frequency: Moisture, sulfur, ash, volatile matter and stability will be tested and analyzed on a daily basis.

  • TEST Testing Frequency Premium Choice Grade Off Grade Bactoscan Min.

Related to Testing Frequency

  • Yearly (1/Year) sampling frequency means the sampling shall be done in the month of September, unless specifically identified otherwise in the effluent limitations and monitoring requirements table.

  • Semi-annual (2/Year) sampling frequency means the sampling shall be done during the months of June and December, unless specifically identified otherwise.

  • Quarterly (1/Quarter) sampling frequency means the sampling shall be done in the months of March, June, August, and December, unless specifically identified otherwise in the Effluent Limitations and Monitoring Requirements table.

  • Testing means that element of inspection that determines the properties or elements, including functional operation of materials, equipment, or their components, by the application of established scientific principles and procedures.

  • Testing service means a national testing service selected by the board.