Return Temperature definition

Return Temperature means the temperature of the water returning from the Consumer Installation to the Heat Exchanger, as measured at the secondary inlet of the Heat Exchanger.
View Source

Examples of Return Temperature in a sentence

  • Torque Converter Lock Engine Percent Torque At Point 2 Ambient Air Temperature Cabin Return Temperature Trans.

  • Provide the following energy- saving strategies: • Optimized Start / Stop • Morning Warm-Up • Hot Water Supply Temperature Reset • Unoccupied Lockout Temperature Setback Pump Enable (existing) 2 Pump Status (existing) 2 Steam Valve (new) 2 Hot Water Supply Temperature (existing) 1 Hot Water Return Temperature (new) 1 🢭 Unit Ventilator Control Furnish and install new DDC to replace the existing pneumatic (35) and Metasys (4) controls associated with the classroom / office unit ventilators.

  • For example, if the Weighted Average Return Temperature is 2.7 degrees less than the Designed Return Temperature, the Return Temperature Adjustment will be 59.4 percent of the Consumption Charge for the applicable billing period.

  • The Return Temperature Adjustment shall be calculated as the Consumption Charge multiplied by 22 percent for each degree, in Fahrenheit, the Weighted Average Return Temperature falls below the Designed Return Temperature, calculated to the one-tenth of one degree.

  • In addition to charging the Return Temperature Adjustment set forth above, should Customer provide return water at a temperature less than the Design Return Temperature, Supplier has the right to: (a) reset the chilled water supply temperature set point at the point of delivery to maintain the 15 minute average of Customer return water temperature at the Designed Return Temperature; and/or (b) vary the chilled water flow to achieve the Design Return Temperature.

  • Supplier may reset the supply temperature at the Point of Delivery as needed to maintain the 15-minute weighted average return temperature at the Point of Return at or above the Designed Return Temperature in Exhibit A.

  • Except as provided below, Supplier shall add the Return Temperature Adjustment to Customer’s invoice in any billing period in which the Weighted Average Return Temperature is less than the Designed Return Temperature.

Related to Return Temperature

  • High-temperature coating means a high performance coating labeled and formulated for application to substrates exposed continuously or intermittently to temperatures above 204oC (400oF).

  • Consumption Data means customer specific electric usage data, or weather adjusted data, including but not limited to kW, kWh, voltage, var, power factor, and other information that is recorded by the electric meter for the Company and stored in its systems. Consumption Data also includes payment and service history, account number, and amount billed.

  • Operating pressure means the pressure at which the parts of an irrigation system are designed by the manufacturer to operate.

  • True vapor pressure means the equilibrium partial pressure exerted by a petroleum liquid as determined in accordance with methods described in American Petroleum Institute (API) Bulletin 2517, Evaporation Loss from External Floating Roof Tanks, 1980. The API procedure may not be applicable to some high viscosity or high pour crudes. Available estimates of true vapor pressure may be used in special cases such as these.

  • Meters shall have the meaning set forth in Section 4.6(a) hereof.