Examples of Remotely read in a sentence
The grid operator submits the corrected meter data to the Data Hub. The grid operator calculates and transmits its network meter data bymetering points per each balancing period as follows:1) Remotely read meter data per metering point as measured;2) Manually read meter data per metering point based on the standard consumption scale and following the principle that manually read quantity is the total quantity entering the network minus remotely read quantities.
Remotely read interval meters (smart meters) change the availability of electricity consumption data from one value per 90 days to closer to 4,320 values in 90 days, as the meter stores the consumer’s consumption data per half-hour.
Residential and Small volume consumers (annual consumption below 150,000 kwhs) (Check one) The default meter service provided under Distributor’s Conditions of Service Remotely read interval meter Manually read interval meter Demand meter ___ Other: Describe All other consumers with a maximum demand greater than 50 kw or annual consumption of greater than 150,000 kwh.
Remotely read interval meters are installed on all customer connections in excess of 750 MWh per annum.With respect to 6.18.4(a)(2), Power and Water submits that customers in the same region with the same connection and usage profiles are treated on a similar basis.With respect to 6.18.4(a)(3), Power and Water does not have customers with micro-generation facilities.With respect to 6.18.4(a)(4), Power and Water does not reassign customers without careful review.
Remotely read events logs For reading the full event log for installed AMI meterAction performed at 90% ofmeters within [30] minutes;andAction performed at 99% ofmeters within 1 hour; andAction performed at 99.9%of meters within [6] hours.13.
The following meter reading requirements will be used for remotely read interval meters: Remotely read interval meters will be read daily.
The Offeror should clearly distinguish tasks that the Offeror will undertake as distinguished from those that are the responsibility of the County.
Remotely read meters would not require the use of estimated meter reads - unless the remote reading ability of the meter is not working.67Estimated reads can be based on information that is either provided by the: • metering data provider, estimated through a statistical method (currently termed estimated read); or • the customer, estimated by reading the meter (currently termed customer self-read).
Remotely read events logs For reading the full event log for installed AMI meterAction performed at 90% of meters within [30] minutes; andAction performed at 99% of meters within 1 hour; andAction performed at 99.9% of meters within [6] hours.10.
Remotely read events logs For reading the full event log for installed AMI meterAction performed at 90% of meters within [30] minutes; andAction performed at 99% of meters within 1 hour; andAction performed at 99.9% of meters within [6] hours.13.