Read Frequency definition

Read Frequency means the frequency of Meter Reading that is required such as monthly, or six-monthly readings;
Sample 1Sample 2Sample 3

Examples of Read Frequency in a sentence

  • Step h: Licensed Provider actions The Licensed Providers will note that the replacement meter is a physical meter as the Meter Read Frequency will be Bi-annual or Monthly and an Initial Read has been notified in respect of the replacement physical meter.

  • A Pseudo Meter will have the following properties: • The meter ID format must conform to the following configuration: o 06PSEUDOYYnnnnnn where YY indicates the calendar year and nnnnnn denotes the unique numeric identifier for the Pseudo Meter• The Meter Read Frequency must only be value ‘N’.

  • Step e: Licensed Provider(s) actionsLicensed Providers will take account of the Meter Read Frequency being established as ‘N’ and shall update their systems and processes accordingly such that they are aware that a Pseudo Meter arrangement is in force and consequently:i.

  • D3011 Meter Read Frequency N shall be the primary indicator that a Pseudo Meter is in place.

  • T009.1d2SUpdate Central Systems & notify LP of updatedmeter dataCMALPsWithin 1 BD of step c If Related Water Supply Meter, also advise SS LP of Pseudo Meter information & Initial Read T004.1 T005.2eDLPs update their processes to ensure Meter Reads submittedby an LPare not sent to the CMA and take dueLPsInternalFollowing step dD3011 Meter Read Frequency ‘N’ shall be the primary indicator that a Pseudo Meter is in place.

  • The current arrangements whereby the Meter Read Frequency must be updated by the Shipper have resulted in a large number of sites having incorrect UNC read frequencies, when compared to the Rolling AQ or recorded equipment.

  • Where the Rolling AQ of a meter point increases to, or is already at, 293,000 kWh or above, the Meter Read Frequency should be amended to Monthly, (if not already set to that value), with effect from the effective date of the new AQ or if already at or above 293,000kWh, as soon as reasonably practical.

  • Because the "better" performing loans were sold and securitized, if Defendants reported on just the portion of the loan portfolio owned by Sunterra, the delinquency rate would increase dramatically and expose the weakness in Sunterra's remaining portfolio.

  • Meter Read Frequency update requests submitted prior to UK Link Suspension will be processed and become effective on the requested date (including if the effective date is post go live).

  • Where the Supply Point Register indicates that the meter point has either a Smart meter or Automated Meter Reading Equipment fitted, the Meter Read Frequency should be amended to Monthly (if not already set to that value).

Related to Read Frequency

  • Yearly (1/Year) sampling frequency means the sampling shall be done in the month of September, unless specifically identified otherwise in the effluent limitations and monitoring requirements table.

  • Yearly (1/Year) sampling frequency means the sampling shall be done in the month of September, unless specifically identified otherwise in the effluent limitations and monitoring requirements table.

  • Semi-annual (2/Year) sampling frequency means the sampling shall be done during the months of June and December, unless specifically identified otherwise.

  • Semi-annual (2/Year) sampling frequency means the sampling shall be done during the months of June and December, unless specifically identified otherwise.

  • Quarterly (1/Quarter) sampling frequency means the sampling shall be done in the months of March, June, August, and December, unless specifically identified otherwise in the Effluent Limitations and Monitoring Requirements table.

  • Frequency means the number of items occurring in each category. Frequency may be determined by analytical method or laboratory specific requirements for accuracy, precision of the analysis, or statistical calculation.

  • Quarterly (1/Quarter) sampling frequency means the sampling shall be done in the months of March, June, August, and December, unless specifically identified otherwise in the Effluent Limitations and Monitoring Requirements table.

  • frequency ride through as used herein shall mean the ability of a Small Generating Facility to stay connected to and synchronized with the system or equipment of the Transmission Owner and any Affected Systems during system disturbances within a range of under-frequency and over- frequency conditions, in accordance with Good Utility Practice and consistent with any standards and guidelines that are applied to other generating facilities in the Balancing Authority Area on a comparable basis. The term “voltage ride through” as used herein shall mean the ability of a Small Generating Facility to stay connected to and synchronized with the system or equipment of the Transmission Owner and any Affected Systems during system disturbances within a range of under-voltage and over-voltage conditions, in accordance with Good Utility Practice and consistent with any standards and guidelines that are applied to other generating facilities in the Balancing Authority Area on a comparable basis.

  • Channel migration zone (CMZ) means the area where the active channel of a stream is prone to move and this results in a potential near-term loss of riparian function and associated habitat adjacent to the stream, except as modified by a permanent levee or dike. For this purpose, near-term means the time scale required to grow a mature forest. (See board manual section 2 for descriptions and illustrations of CMZs and delineation guidelines.)

  • Radio frequency identification (RFID means an automatic identification and data capture technology comprising one or more reader/interrogators and one or more radio frequency transponders in which data transfer is achieved by means of suitably modulated inductive or radiating electromagnetic carriers.

  • Centralized Message Distribution System (CMDS) means the industry-wide data collection system, which handles the daily exchange of message details between CMDS participating telephone companies (also known as CMDS Direct Participants). AT&T-21STATE is a CMDS Direct Participant.

  • Common Channel Signaling (CCS means an out-of-band, packet-switched, signaling network used to transport supervision signals, control signals, and data messages. It is a special network, fully separate from the transmission path of the public switched network. Unless otherwise agreed by the Parties, the CCS protocol used by the Parties shall be SS7.

  • Single tomogram system means a CT x-ray system which obtains x-ray transmission data during a scan to produce a single tomogram.

  • Centralized Message Distribution System (CMDS) means the transport system that LECs use to exchange outcollect and Carrier Access Billing System “CABS” access messages among each other and other Parties connected to CMDS.

  • Fraud Monitoring System means an off-line administration system that monitors suspected occurrences of ABT- related fraud.

  • InterMTA Traffic is: (a) traffic originated by a CMRS end user of ALLTEL in an MTA and terminated to an end user of MATC in another MTA; and (b) traffic originated by an end user of MATC in one MTA and terminated to an end user of ALLTEL in another MTA.

  • Dialing Parity means as defined in the Act. As used in this Agreement, Dialing Parity refers to both Local Dialing Parity and Toll Dialing Parity.

  • Interconnection Activation Date means the date that the construction of the joint facility Interconnection arrangement has been completed, trunk groups have been established, joint trunk testing is completed and trunks have been mutually accepted by the Parties.

  • Signaling System 7 (SS7 means a signaling protocol used by the CCS Network.

  • Monitoring Indicator means a measure of HSP performance that may be monitored against provincial results or provincial targets, but for which no Performance Target is set;

  • Furniture maintenance product means a wax, polish, conditioner, or any other product designed for the purpose of polishing, protecting or enhancing finished wood surfaces other than floors. Furniture maintenance product does not include: dusting aids; wood cleaners, and products designed solely for the purpose of cleaning; and products designed to leave a permanent finish such as stains, sanding sealers and lacquers.

  • Carrier Access Billing System (“CABS”) is the system which is defined in a document prepared under the direction of the Billing Committee of the OBF. The CABS document is published by Telcordia in Volumes 1, 1A, 2, 3, 3A, 4 and 5 as Special Reports SR-OPT-001868, SR-OPT-0011869, SR-OPT-001871, SR-OPT- 001872, SR-OPT-001873, SR-OPT-001874, and SR-OPT-001875, respectively, and contains the recommended guidelines for the billing of access and other connectivity services. Sprint’s carrier access billing system is its Carrier Access Support System (CASS). CASS mirrors the requirements of CABS.

  • IntraLATA LEC Toll means IntraLATA Toll traffic carried solely by a Local Exchange Carrier and not by an IXC. "IntraLATA Toll Traffic" describes IntraLATA Traffic outside the Local Calling Area.

  • Common Channel Signaling (“CCS”) is a method of digitally transmitting call set-up and network control data over a digital signaling network fully separate from the public switched telephone network that carries the actual call.

  • Generator to Load Distribution Factor or “GLDF” shall mean a generator’s impact on a Flowgate while serving load in that generator’s Balancing Authority Area.

  • System Life means all phases of the system's development, production, or support.