Measurement Device definition

Measurement Device means the lease automatic custody transfer, coriolis, or other metering device or equipment which, along with application of test results (e.g. shrinkage factors, BS&W factors, meter proves, etc), as required for the Individual System, measure the amount of oil, water, and BS&W, all of which shall conform to industry standards and government regulations, as further described in Article 4.
Sample 1Sample 2Sample 3
Measurement Device means the meter body (which may consist of an orifice meter or ultrasonic meter), LACT unit or other Gas or Liquid Condensate metering device, tube, orifice plate, connected pipe, tank strapping, and fittings used in the measurement of Gas flow, Liquid Condensate flow and volume and/or Gas Btu content.
Sample 1Sample 2Sample 3
Measurement Device means any active or passive device approved by a
Sample 1Sample 2Sample 3

Examples of Measurement Device in a sentence

  • A traceable calibration is achieved when each Measurement Device and Working Standard, in a hierarchy stretching back to the National Standard, was itself properly calibrated, and the results properly documented.

  • Specific information on measurement methods (listed in Exhibit 3-1) can be found in EPA's Indoor Radon and Radon Decay Product Measurement Device Protocols (EPA 520-402-R-92-004; U.S. EPA 1992c).

  • Written and verbal guidance should be in accordance with EPA's Indoor Radon and Radon Decay Product Measurement Device Protocols (EPA 520-402-R-92-004; U.S. EPA 1992c).and guidance published in the RMP Program Handbook (EPA 520/1-91-006; U.S. EPA 1991).

  • Adherence to the EPA device protocols, Indoor Radon and Radon Decay Product Measurement Device Protocols (EPA 520-402-R-92-004; U.S. EPA 1992c) is a requirement for participation in the RMP program.4.3.2 Written Measurement Guidance Measurement organizations should provide clients with written measurement instructions that clearly explain the responsibilities of the client and the other parties to the real estate transactions during the test period.

  • The protocols outlined in this section were developed by EPA for testers and homeowners adhering to the quality assurance practices summarized in Section 4.4 of this report, and in EPA's Indoor Radon and Radon Decay Product Measurement Device Protocols (EPA 520-402-R-92-004; U.S. EPA 1992c).

  • Primary Measurement Device: A device such as a gauging pit, weir tank or flume installed in the liquid trade waste discharge line suitable for installation of instrumentation for flow measurement.

  • Unless otherwise agreed by the TSO after this time the Service Provider must have installed its own Monitoring Equipment to the standard set out by the TSO in accordance with the DS3 Performance Measurement Device Standards for Fast Acting Services.For the period to 28 February 2019, if the unavailability of TSO Monitoring Equipment prevents the Service Provider from submitting the required template for the purposes of Performance Assessment an alternate data source may be used.

  • An Evidential Breath Measurement Device (EBMD) shall be used for alcohol testing.

  • Shi 2650Non-Contact Measurement Device Based on Ultrasonic TechnologyZ.P. Lan, H.M. Meng, J.T. Li, Y.R. Wang, P.

  • G Indoor Radon and Radon Decay Product Measurement Device Protocols(EPA 402-R-92-004, July 1992).This document is intended for use by qualified radon measurement technicians and testers.


More Definitions of Measurement Device

Measurement Device means any active or passive device approved by a proficiency program and used for the measurement of radon or radon progeny in air, water, or soil in the indoor environment of a building;
Sample 1Sample 2Sample 3
Measurement Device means the meter body and associated totalizer (which may consist of a Positive Displacement, Coriolis or Turbine technology) used in the measurement of Hydrocarbon flow and volume.
Sample 1Sample 2Sample 3
Measurement Device means the totalizing meter, other metering device or equipment which, along with application of test results (e.g. meter proves, etc), as required for the Individual System, measure the amount of water, all of which shall conform to industry standards and government regulations, as further described in Article 4.
Sample 1Sample 2Sample 3
Measurement Device means a calibrated calibrator, standard, equipment and test equipment that is intended to be used to test, measure, or calibrate other measurement devices. It is not to be used to test, measure, or calibrate an aeronautical product;
Sample 1
Measurement Device means any[ cabinet-approved] active or passive device
Sample 1Sample 2
Measurement Device means any active or passive device accepted or
Sample 1

Related to Measurement Device

  • Measurement means metered volumes at a custody transfer meter through a turbine, Coriolis, or such other meter.

  • Payment device means any credit card as defined in 15 U.S.C. § 1602(k) or any "accepted card or

  • Measurement Point means the emission source for which continuous emission measurement systems (CEMS) are used for emission measurement, or the cross-section of a pipeline system for which the CO2 flow is determined using continuous measurement systems;

  • Reference evapotranspiration or “ETo” means a standard measurement of environmental parameters which affect the water use of plants. ETo is given expressed in inches per day, month, or year as represented in Appendix C of these Guidelines, and is an estimate of the evapotranspiration of a large field of four to seven-inch tall, cool-season grass that is well watered. Reference evapotranspiration is used as the basis of determining the Maximum Applied Water Allowances.

  • Assisted amusement device means an amusement device, skill device, or ride

  • Instantaneous flow measurement means the flow measured during the minimum time required for the flow-measuring device or method to produce a result in that instance. To the extent practical, instantaneous flow measurements coincide with the collection of any grab samples required for the same sampling period so that together the samples and flow are representative of the discharge during that sampling period.

  • COVID-19 test means a viral test for SARS-CoV-2 that is:

  • Sampler means a person who is employed by or is an owner of a licensed laboratory, grower, or processor and is authorized by that employer to collect samples in accordance with the testing laboratory's standard operating procedures and these Rules.

  • Approved Device means a device described in Subsection 20A-21-201(4) used to

  • Sample means urine, blood, breath, saliva, or hair.

  • Monitoring device means the total equipment used to measure and record (if applicable) process parameters.

  • Performance Measurement Period has the meaning set forth in Section 3.1(e)(ii).

  • Cephalometric device means a device intended for the radiographic visualization and measurement of the dimensions of the human head.

  • Test means such test as is prescribed by the particulars or considered necessary by the Inspecting Officer whether performed or made by the Inspecting Officer or any agency acting under the direction of the Inspecting Officer;

  • Baseline means the “Initial Small Business Lending Baseline” set forth on the Initial Supplemental Report (as defined in the Definitive Agreement), subject to adjustment pursuant to Section 3(a).

  • Target Population means persons with low incomes who have one or more disabilities, including mental illness, HIV or AIDS, substance abuse, or other chronic health condition, or individuals eligible for services provided pursuant to the Lanterman Developmental Disabilities Services Act (Division 4.5 (commencing with Section 4500) of the Welfare and Institutions Code) and may include, among other populations, adults, emancipated minors, families with children, elderly persons, young adults aging out of the foster care system, individuals exiting from institutional settings, veterans, and homeless people.

  • Continuous parameter monitoring system or "CPMS" means all of the equipment necessary to meet the data acquisition and availability requirements of this article, to monitor process and control device operational parameters (for example, control device secondary voltages and electric currents) and other information (for example, gas flow rate, O2 or CO2 concentrations), and to record average operational parameter value(s) on a continuous basis.

  • Operating parameter value means a minimum or maximum value established for a control device or process parameter that, if achieved by itself or in combination with one (1) or more other operating parameter values, determines that an owner or operator has complied with an applicable emission limit.

  • Prescription device means an instrument, apparatus, implement, machine,

  • Performance Monitoring System has the meaning given to it in paragraph 1.1.2 in Part B of Schedule 6 (Service Levels, Service Credits and Performance Monitoring);

  • Performance evaluation means evaluation of work and program participation as well as other areas of behavior.

  • Module means specific portion of the Application Software designated as such in the Documentation made available to the Customer under the Notification Form.

  • Continuous parameter monitoring system (CPMS means all of the equipment necessary to meet the data acquisition and availability requirements of the Prevention of Significant Deterioration program, to monitor process and control device operational parameters (for example, control device secondary voltages and electric currents) and other information (for example, gas flow rate, O2 or CO2 concentrations), and to record average operational parameter value(s) on a continuous basis.

  • Screening Test means a drug or alcohol test which uses a method of analysis allowed by the Minnesota Drug and Alcohol Testing in the Workplace Act to be used for such purposes.

  • Network Interface Device or "NID" is a Network Element (including all of its features, functions and capabilities) that includes any means of Interconnection of End User Customer premises wiring to Qwest's distribution plant, such as a cross connect device used for that purpose. "New Service Provider" means the Party to which an End User Customer switches its local Exchange Service or the Party to which an End User Customer is porting its telephone number(s).

  • Quantitative fit test or "QNFT" means an assessment of the adequacy of respirator fit by numerically measuring the amount of leakage into the respirator.