FREQUENCY AND definition

FREQUENCY AND timing: Modified CRAM surveys should take place during the growing season. Pre-project baseline modified CRAM scores will be established for representative monitoring sites prior to the implementation of Program management. Following pre-project baseline establishment, modified CRAM scores will be obtained annually during the growing season, with an option to reduce monitoring frequency once trends are established if mutually agreed upon by the Program and Department.
FREQUENCY AND. TIMING: The rate on this note may change as often as DAILY. A change in the interest rate will take effect ON THE SAME DAY. [ ] LIMITATIONS: During the term of this loan, the applicable annual interest rate will not be more than __.000% or less than __.000%. The rate may not change more than _____% each ________________________.
FREQUENCY AND. Timing: The rate on this note may change as often as ________. A change in the interest rate will take effect ________. ___

Examples of FREQUENCY AND in a sentence

  • III.1. Frequency and Locations of Work: To be determined solely by HACP.

  • Under this option, the amount of investment through SIP installment shall be increased by amount chosen/designated by Investor post every 12th (twelfth) SIP installment.2. Minimum Step-Up SIP Amount: ` 500 and in multiples of ` 500 thereafter.3. Default Step-Up SIP Frequency and amount: In case the investor fails to specify any frequency or amount for Step-Up SIP, the same shall be deemed as Yearly Step-Up SIP and ` 500 respectively and the application form shall be processed accordingly.

  • Frequency and Schedule The adjustment of the freefloat-adjusted factors (“FAFs”), the calculation of the Cap Factors (“CFs”) and the update of issued shares (“IS”) will be undertaken quarterly.

  • When considered necessary and feasible by the Federal agency, grantees may be required to report the amount of cash advances in excess of three days’ needs in the hands of their subgrantees or contractors and to provide short nar- rative explanations of actions taken by the grantee to reduce the excess bal- ances.(4) Frequency and due date.

  • E.1 Waste Water Discharge Frequency and Quantities – Existing & Proposed Provide an estimation of the quantity of waste water likely to be emitted in relation to all primary and secondary discharge points applied for.

  • Frequency and type of safety inspections conducted at work sites.

  • Frequency and duration of rolling During the match the pitch may be rolled at the request of the captain of the side batting second, for a period of not more than 7 minutes, before the start of the second innings.

  • Frequency and Under- and Over- Voltage Conditions: The Generation Interconnection Customer shall ensure “frequency ride through” capability and “voltage ride through” capability of its Customer Facility.

  • Frequency and severity of claimsThe frequency and severity of claims can be affected by several factors.

  • UTC means Co-ordinated Universal Time which bears the same meaning as in the document Standard Frequency and Time Signal Emission, International Telecommunication Union - RTF.460(ISBN92-61-05311-4) (colloquially referred to as Rugby Time).


More Definitions of FREQUENCY AND

FREQUENCY AND. TIMING: The rate on this note may change as often as DAILY. A change in the interest rate will take effect ON THE SAME DAY.
FREQUENCY AND. Timing: The rate on this note may change as often as _____________________________________________. A change in the interest rate will take effect_______________________. |_| Limitations: During the term of this loan, the applicable annual interest rate will not be more than ____________________% or less than ______________________%. The rate may not change more than _______________________% each ___________________________.
FREQUENCY AND. TIMING: The rate on this note may change as often as DAILY. A change in the interest rate will take effect ON THE SAME DAY ___ LIMITATIONS: During the term of this loan, the applicable annual interest rate will not be more than __________% or less than ________%. The rate may not change more than __________% each __________. EFFECT OF VARIABLE RATE: A change in the interest rate will have the following effect on the payouts: ___ The amount of each scheduled payment will change. ___ The amount of the initial payment will change. XX THE AMOUNT DUE AT MATURITY WILL CHANGE. ACCRUAL METHOD: Interest will be calculated on a ACTUAL/365 basis. POST MATURITY RATE: I agree to pay interest on the unpaid balance of this note owing after maturity, and until paid in full, as stated below: ___ on the same fixed or variable rate basis in effect before maturity (as indicated above). XX at a rate equal to 18.00%. XX LATE CHARGE: If a payment is made more than 10 days after it is due, I agree to pay a late charge of 5.000% OF THE LATE PAYMENT WITH A MINIMUM OF $5.00. XX
FREQUENCY AND. TIMING: The rate on this note may change as often as daily. A change in the interest rate will take effect on the same day Bank One, Indiana, NA Prime Rate changes. [ ] LIMITATIONS: During the term of this loan, the applicable annual interest rate will not be more than ________% or less than ________%. The rate may not change more than _________% each ________________.

Related to FREQUENCY AND

  • frequency ride through as used herein shall mean the ability of a Small Generating Facility to stay connected to and synchronized with the system or equipment of the Transmission Owner and any Affected Systems during system disturbances within a range of under-frequency and over- frequency conditions, in accordance with Good Utility Practice and consistent with any standards and guidelines that are applied to other generating facilities in the Balancing Authority Area on a comparable basis. The term “voltage ride through” as used herein shall mean the ability of a Small Generating Facility to stay connected to and synchronized with the system or equipment of the Transmission Owner and any Affected Systems during system disturbances within a range of under-voltage and over-voltage conditions, in accordance with Good Utility Practice and consistent with any standards and guidelines that are applied to other generating facilities in the Balancing Authority Area on a comparable basis.

  • Base Capacity Demand Resource Constraint for the PJM Region or an LDA, shall mean, for the 2018/2019 and 2019/2020 Delivery Years, the maximum Unforced Capacity amount, determined by PJM, of Base Capacity Demand Resources and Base Capacity Energy Efficiency Resources that is consistent with the maintenance of reliability. As more fully set forth in the PJM Manuals, PJM calculates the Base Capacity Demand Resource Constraint for the PJM Region or an LDA, by first determining a reference annual loss of load expectation (“LOLE”) assuming no Base Capacity Resources, including no Base Capacity Demand Resources or Base Capacity Energy Efficiency Resources. The calculation for the PJM Region uses a daily distribution of loads under a range of weather scenarios (based on the most recent load forecast and iteratively shifting the load distributions to result in the Installed Reserve Margin established for the Delivery Year in question) and a weekly capacity distribution (based on the cumulative capacity availability distributions developed for the Installed Reserve Margin study for the Delivery Year in question). The calculation for each relevant LDA uses a daily distribution of loads under a range of weather scenarios (based on the most recent load forecast for the Delivery Year in question) and a weekly capacity distribution (based on the cumulative capacity availability distributions developed for the Installed Reserve Margin study for the Delivery Year in question). For the relevant LDA calculation, the weekly capacity distributions are adjusted to reflect the Capacity Emergency Transfer Limit for the Delivery Year in question. For both the PJM Region and LDA analyses, PJM then models the commitment of varying amounts of Base Capacity Demand Resources and Base Capacity Energy Efficiency Resources (displacing otherwise committed generation) as interruptible from June 1 through September 30 and unavailable the rest of the Delivery Year in question and calculates the LOLE at each DR and EE level. The Base Capacity Demand Resource Constraint is the combined amount of Base Capacity Demand Resources and Base Capacity Energy Efficiency Resources, stated as a percentage of the unrestricted annual peak load, that produces no more than a five percent increase in the LOLE, compared to the reference value. The Base Capacity Demand Resource Constraint shall be expressed as a percentage of the forecasted peak load of the PJM Region or such LDA and is converted to Unforced Capacity by multiplying [the reliability target percentage] times [the Forecast Pool Requirement] times [the forecasted peak load of the PJM Region or such LDA, reduced by the amount of load served under the FRR Alternative].

  • Frequency means the number of items occurring in each category. Frequency may be determined by analytical method or laboratory specific requirements for accuracy, precision of the analysis, or statistical calculation.

  • Heat input rate means the amount of heat input (in mmBtu) divided by unit operating time (in hours) or, with regard to a specific fuel, the amount of heat input attributed to the fuel (in mmBtu) divided by the unit operating time (in hours) during which the unit combusts the fuel.

  • Hard cider means the same as that term is defined in 26 U.S.C. Sec. 5041.

  • Contract Month means a calendar month (or portion thereof) during the term of this Agreement. Contract Month 1 shall commence on the first day of the first calendar month following the Effective Date and end on the last day of that calendar month.

  • CREFC® Servicer Watch List/Portfolio Review Guidelines As of each Determination Date a report, including and identifying each Performing Serviced Loan satisfying the “CREFC® Portfolio Review Guidelines” approved from time to time by the CREFC® in the “CREFC® Servicer Watch List” format substantially in the form of and containing the information called for therein for the Mortgage Loans, or such other form (including other portfolio review guidelines) for the presentation of such information as may be approved from time to time by the CREFC® for commercial mortgage securities transactions generally.

  • Dispatch Rate means the control signal, expressed in dollars per megawatt-hour, calculated and transmitted continuously and dynamically to direct the output level of all generation resources dispatched by the Office of the Interconnection in accordance with the Offer Data.

  • Lowest achievable emission rate (LAER means, for any source, the more stringent rate of emissions based on the following:

  • Semi-annual (2/Year) sampling frequency means the sampling shall be done during the months of June and December, unless specifically identified otherwise.

  • T-Xxxx Rate means, for any Quarterly Floating Rate Period, the average yield expressed as a percentage per annum on three-month Government of Canada Treasury Bills, as reported by the Bank of Canada, for the most recent treasury bills auction preceding the applicable Floating Rate Calculation Date.

  • Base Load Generation Resource means a Generation Capacity Resource that operates at least 90 percent of the hours that it is available to operate, as determined by the Office of the Interconnection in accordance with the PJM Manuals.

  • Maintenance Margin means the minimum amount of money required in your Trading Account as specified on the Trading Platform in order to keep a Transaction open on the Trading Platform.

  • New business premium rate means, for each class of business as to a rating period, the lowest premium rate charged or offered, or which could have been charged or offered, by the small employer carrier to small employers with similar case characteristics for newly issued health benefit plans with the same or similar coverage;

  • Process weight means the total weight of all materials introduced into any source operation. Solid fuels charged will be considered as part of the process weight, but liquid and gaseous fuels and combustion air will not.

  • LOCKHEED XXXXXX Procurement Representative means a person authorized by LOCKHEED XXXXXX'x cognizant procurement organization to administer and/or execute this Contract.

  • Base Capacity Demand Resource Price Decrement means, for the 2018/2019 and 2019/2020 Delivery Years, a difference between the clearing price for Base Capacity Demand Resources and Base Capacity Energy Efficiency Resources and the clearing price for Base Capacity Resources and Capacity Performance Resources, representing the cost to procure additional Base Capacity Resources or Capacity Performance Resources out of merit order when the Base Capacity Demand Resource Constraint is binding.

  • Yearly (1/Year) sampling frequency means the sampling shall be done in the month of September, unless specifically identified otherwise in the effluent limitations and monitoring requirements table.

  • Area Agency on Aging (AAA means the Department of Human Services designated agency charged with the responsibility to provide a comprehensive and coordinated system of services to seniors and individuals with disabilities in a planning and service area. For the purpose of these rules, the term Area Agency on Aging is inclusive of both Type A and Type B Area Agencies on Aging as defined in ORS 410.040 and described in ORS 410.210 to 410.300.

  • NZOC means the New Zealand Olympic Committee Incorporated.

  • EXXXX means the Commission’s Electronic Data Gathering, Analysis and Retrieval System.

  • Planned External Financed Generation Capacity Resource means a Planned External Generation Capacity Resource that, prior to August 7, 2015, has an effective agreement that is the equivalent of an Interconnection Service Agreement, has submitted to the Office of the Interconnection the appropriate certification attesting achievement of Financial Close, and has secured at least 50 percent of the MWs of firm transmission service required to qualify such resource under the deliverability requirements of the Reliability Assurance Agreement.

  • Peak tube potential means the maximum value of the potential difference across the x-ray tube during an exposure.

  • Expiry Date (Data di Scadenza) means the "Expiry Date" as specified in § 1 of the Product and Underlying Data.

  • Grade point average or "GPA" means the grade point average earned by an eligible student and reported by the high school or participating institution in which the student was enrolled based on a scale of 4.0 or its equivalent if the high school or participating institution that the student attends does not use the 4.0 grade scale;

  • Contract Monitor means the Department employee identified in Section 1.6 of the IFB as the Contract Monitor.