Direct PM2.5 emissions definition

Direct PM2.5 emissions means solid particles emitted directly from an air emissions source or activity, or gaseous emissions or liquid droplets from an air emissions source or activity which condense to form particulate matter at ambient temperatures. Direct PM2.5 emissions include elemental carbon, directly emitted organic carbon, directly emitted sulfate, directly emitted nitrate, and other inorganic particles (including but not limited to crustal material, metals, and sea salt).
Sample 1Sample 2Sample 3

Examples of Direct PM2.5 emissions in a sentence

  • If reported, approved and the applicable premium has been paid, covered operations include birthday/social party(s) supervised by you and related to the above described operations and activities.

  • Direct PM2.5 emissions include elemental carbon, directly emitted organic carbon, directly emitted sulfate, directly emitted nitrate, and other inorganic particles (including but not limited to crustal material, and metals).

  • Direct PM2.5 emissions include elemental carbon, directly emitted organic carbon, directly emitted sulfate, directly emitted nitrate, and other inorganic particles (including but not limited to crustal material, metals and sea salt).

  • Direct PM2.5 emissions can result from particles in exhaust fumes, from brake and tire wear, from road dust kicked up by vehicles, and from highway and transit construction.

  • Direct PM2.5 emissions from land-based nonroad diesel engines amount to increasingly large percentages of total man-made diesel PM2.5. Between 1996 and 2030, we estimate that the percentage of total man-made diesel PM2.5 emissions coming from land- based nonroad diesel engines will increase from about 46 percent to 72 percent (based on a 48 state inventory).

  • Direct PM2.5 emissions include organic carbon, elemental carbon, and crustal material.

  • Direct PM2.5 emissions include elemental carbon, directly emitted organic carbon (OC), directly emitted sulfate (SO4), directly emitted nitrate (NO3), and other inorganic particles (including but not limited to crustal material, metals, and sea salt).’’The PM2.5 Implementation Rulerequires all states to address SO2 as a PM2.5 precursor and to evaluate SO2 for possible control measures in all PM2.5 nonattainment areas.

  • This rule sets the significant emissions rate for direct PM2.5 and precursor pollutants as follows:o Direct PM2.5 emissions at 10 tpyo SO2 emissions at 40 tpyo NOx emissions at 40 tpyo VOC emissions (if regulated) 40 tpy unless the state demonstrates that a lower rate is appropriate.• Stationary Source- A source includes most of the emitting activities on properties under common control and related to a general industry group type.

  • Direct PM2.5 emissions convert directly into ambient PM2.5, thus, to the extent that emissions occur in population areas, exposures to direct PM2.5 will tend to be higher, and monetized health benefits will be higher than for SO2 emissions.For context, it is important to notethat the magnitude of the PM benefits is largely driven by the concentration response function for premature mortality.

  • Direct PM2.5 emissions include elemental carbon, directly emitted organic carbon (OC), directly emitted sulfate (SO4), directly emitted nitrate (NO3), and other inorganic particles (including but not limited to crustal material, metals, and sea salt).’’The PM2.5 Implementation Rule requires all states to address SO2 as a PM2.5 attainment plan precursor and to evaluate SO2 for possible control measures in all PM2.5 nonattainment areas.

Related to Direct PM2.5 emissions

  • PM10 emissions means PM10 emitted to the ambient air as measured by an applicable reference method, or an equivalent or alternate method, specified in 40 CFR Part 51, Appendix M as of December 8, 1984, or by a test method specified in these regulations or any supplement thereto.

  • Direct Patient Care means the provision of health care services provided directly to individuals being treated for or suspected of having physical or mental illnesses. Direct patient care includes both, face-to-face and telehealth-based preventative care and first-line supervision.

  • Exhaust emissions means the emission of gaseous, solid and liquid compounds from the tailpipe.

  • Production Environment means a logical group of virtual or physical computers comprised within the Cloud Environment to which the Customer will be provided with access and use the purchased Cloud Application(s) in production and for its generally marketed purpose.

  • Greenhouse Gas Emissions means emissions in terms of tonnes of CO2 equivalent of carbon dioxide (CO2), methane (CH4), nitrous oxide (N2O), hydrofluorcarbons (HFCs), perfluorocarbons (PFCs), nitrogen trifluoride (NF3) and sulphur hexafluoride (SF6) determined pursuant to Regulation (EU) No 525/2013 and falling within the scope of this Regulation;

  • Fugitive dust emissions means particulate matter from process operations that does not pass through a process stack or vent and that is generated within plant property boundaries from activities such as: unloading and loading areas, process areas, stockpiles, stock pile working, plant parking lots, and plant roads (including access roads and haul roads).

  • Excess emissions - means an emission rate that exceeds any applicable emission limitation or standard allowed by any rule in Sections .0500, .0900, .1200, or .1400 of Subchapter 02D; or by a permit condition; or that exceeds an emission limit established in a permit issued under 15A NCAC 02Q .0700. (Note: Definitions of excess emissions under 02D .1110 and 02D .1111 shall apply where defined by rule.)

  • High global warming potential hydrofluorocarbons means any hydrofluorocarbons in a particular end use for which EPA’s Significant New Alternatives Policy (SNAP) program has identified other acceptable alternatives that have lower global warming potential. The SNAP list of alternatives is found at 40 CFR part 82, subpart G, with supplemental tables of alternatives available at (http://www.epa.gov/snap/ ).

  • Indirect Participants Has the meaning specified in Section 4.01(b) of this Trust Supplement.

  • Direct Participants means each person shown in the records of the Clearing Systems as a holder of the Securities;

  • Continuous emissions rate monitoring system or “CERMS” means the total equipment required for the determination and recording of the pollutant mass emissions rate (in terms of mass per unit of time).

  • Working voltage means the highest value of an electrical circuit voltage root-mean-square (rms), specified by the manufacturer, which may occur between any conductive parts in open circuit conditions or under normal operating conditions. If the electrical circuit is divided by galvanic isolation, the working voltage is defined for each divided circuit, respectively.

  • Indirect Participant means a Person who holds a beneficial interest in a Global Note through a Participant.

  • Operating Environment means, collectively, the platform, environment and conditions on, in or under which the Software is intended to be installed and operate, as set forth in the Statement of Work, including such structural, functional and other features, conditions and components as hardware, operating software and system architecture and configuration.

  • Direct scattered radiation means that scattered radiation which has been deviated in direction only by materials irradiated by the useful beam (See "Scattered radiation").

  • Co-generation means the sequential production of electricity

  • Indirect supervision means the supervision of an unlicensed school staff member when the school nurse or other health care provider is not physically available on site but immediately available by telephone.

  • Emissions means the total emissions in tCO2 equivalent for a target period; “EU ETS Directive” means Directive 2003/87/EC of the European Parliament and of the Council establishing a scheme for greenhouse gas emissions allowance trading within the Community and amending Council Directive 96/61/EC, as amended from time to time;1

  • Heat input means the product (expressed in mmBtu/time) of the gross calorific value of the fuel (expressed in Btu/lb) and the fuel feed rate into the combustion device (expressed in mass of fuel/time) and does not include the heat derived from preheated combustion air, recirculated flue gases, or ex- haust from other sources.

  • Stormwater management system means any equipment, plants,

  • Predictive emissions monitoring system or "PEMS" means all of the equipment necessary to monitor process and control device operational parameters (for example, control device secondary voltages and electric currents) and other information (for example, gas flow rate, O2 or CO2 concentrations), and calculate and record the mass emissions rate (for example, pounds per hour) on a continuous basis.

  • Continuous emissions monitoring system or “CEMS” means all of the equipment that may be required to meet the data acquisition and availability requirements of this chapter, to sample, to condition (if applicable), to analyze, and to provide a record of emissions on a continuous basis.

  • Secondary emissions means emissions which occur as a result of the construction or operation of a major stationary source or major modification, but do not come from the major stationary source or major modification itself. For the purposes of this chapter, “secondary emissions” must be specific, well-defined, and quantifiable, and must impact the same general areas as the stationary source modification which causes the secondary emissions. “Secondary emissions” includes emissions from any offsite support facility which would not be constructed or increase its emissions except as a result of the construction or operation of the major stationary source or major modification. “Secondary emissions” does not include any emissions which come directly from a mobile source, such as emissions from the tailpipe of a motor vehicle, from a train, or from a vessel.

  • Generation means the production of electricity;

  • Actual emissions means the actual rate of emissions in tpy of any regulated pollutant (for fee calculation) emitted from a Part 71 source over the preceding calendar year. Actual emissions shall be calculated using each emissions unit’s actual operating hours, production rates, in-place control equipment, and types of materials processed, stored, or combusted during the preceding calendar year.

  • Non-Methane Hydrocarbons (NMHC means the sum of all hydrocarbon air pollutants except methane.