Conversion System definition

Conversion System means all of the equipment needed to convert Landfill Gas into any Covered Product, which equipment is owned by or under contract to ▇▇▇▇▇▇▇▇ POWER and is located at the Landfill and is not part of the Collection System which is more fully described in Exhibit D attached herein and made a part hereof.
View Source
Conversion System shall also mean any new or different
View Source
Conversion System. The Contractor’s building or enclosure and equipment required for the processing and delivery of the Beneficial End Use Product to the Energy Customer. The Conversion System includes, but is not limited to, Contractor’s connection to the Delivery Point, compression equipment, an oil and gas cooler, a condensate knockout tank, scrub areas, generating equipment, treatment facilities, and related facilities. However, Contractor may elect to use such different technologies or equipment for the processing of Landfill Gas, the generation of electric power or other energy as either of them, in its sole judgment, determines would be better suited for the application. Where the context requires, "Conversion System" shall also mean any new or different
View Source

Examples of Conversion System in a sentence

  • The electrical isolation (Ri) is calculated according to the following formula: Ri = Ro*Ub*(1/U1' – 1/U1) Figure 5 Measurement of U1’ Electrical Chassis Energy Conversion System Assembly REESS High Voltage Bus + + Energy Conversion System REESS - U1’ R0 Traction System Electrical Chassis If U2 is greater than U1, insert a standard known resistance (Ro) between the positive side of the high voltage bus and the electrical chassis.

  • If the Conversion System ceases operation on any day prior to December 31 in the final year of operation, the minimum annual royalty will be subject to pro rata reduction based on the number of calendar months the Conversion System operated in that calendar year.

  • The electrical isolation (Ri) is calculated according to the following formula: Ri = Ro*Ub*(1/U1' – 1/U1) Figure 5 Measurement of U1’ Electrical Chassis Energy Conversion System Assembly REESS High Voltage Bus + + Energy Conversion System - U1’ R0 Traction System Electrical Chassis If U2 is greater than U1, insert a standard known resistance (Ro) between the positive side of the high voltage bus and the electrical chassis.

  • Upon reasonable request of COUNTY, ▇▇▇▇▇▇▇▇ POWER shall assist COUNTY in briefing the officials of a governmental agency or body, or other interested party, with respect to the status of the Conversion System.

  • In the event of the revocation or expiration of any permit and or license integral to the operation of the Conversion System, ▇▇▇▇▇▇▇▇ POWER shall restore said permit and or license in accordance with Section 1.14 (a)(ii) of this Agreement.

  • Calculate the electrical isolation (Ri) according to the following formula: Ri = Ro*Ub*(1/U1’ – 1/U1) Figure 2 Measurement of U1’ Electrical Chassis Energy Conversion System Assembly REESS Assembly High Voltage Bus + + Energy Conversion System - REESS Ub - U1´ Ro Traction System Electrical Chassis If U2 is greater than U1, insert a standard known resistance (Ro) between the positive side of the high voltage bus and the electrical chassis.

  • Upon reasonable request by ▇▇▇▇▇▇▇▇ POWER, COUNTY shall make documents available, attend and otherwise assist ▇▇▇▇▇▇▇▇ POWER in proceedings, hearings, or other procedures necessitated by any required environmental impact reports, governmental permits, authorizations and similar type requirements, related to the construction and operation of ▇▇▇▇▇▇▇▇ POWER’s Conversion System and any related facilities and equipment.

  • The electrical isolation (Ri) is calculated according to the following formula: Ri = Ro*Ub*(1/U1' – 1/U1) Figure 5 Measurement of U1’ Electrical Chassis Energy Conversion System Assembly REESS High Voltage Bus + + Ene Conve SS - U1’ R0 Traction System REE rgy rsion tem Electrical Chassis If U2 is greater than U1, insert a standard known resistance (Ro) between the positive side of the high voltage bus and the electrical chassis.

  • Under no circumstances shall ▇▇▇▇▇▇▇▇ POWER have any liability to COUNTY, its employees, agents, contractors, lessees, licensees, or invitees resulting, directly or indirectly, from any change in the surface or subsurface conditions of the Landfill other than the Site resulting from the settlement of the Landfill either during or after the construction and installation of the Collection System and the installation of the Conversion System or Systems and the Utility Interface.

  • Development of the Site for the Conversion System shall be conducted in a good and workmanlike manner and shall meet all other requirements contained in this Agreement.


More Definitions of Conversion System

Conversion System means a package which may include fuel, ignition, emissions control, and engine components that are modified, removed, or added to a motor vehicle or a special to make that vehicle or equipment an eligible vehicle.
View Source

Related to Conversion System

  • Reservation System means the Contributor's Reservation Terminal and Reservation System equipment and software, if any.

  • Distribution System means the system of wires and associated facilities between the delivery points on the transmission lines or the generating station connection and the point of connection to the installation of the consumers;

  • Production System means a live SAP system used for running Licensee’s internal business operations and where Licensee’s data is recorded.

  • Collection System means software used for the collection, tracking, and reporting of 34 outcomes data for Clients enrolled in the FSP programs.

  • Fire protection system means any device or system designed and installed to —