CO2 injection definition

CO2 injection means is the process of injecting CO2 in a supercritical state into geologic reservoirs.
Sample 1Sample 2Sample 3
CO2 injection means the process of injecting CO2 into geologic reservoirs.
Sample 1Sample 2Sample 3

Examples of CO2 injection in a sentence

  • The study also investigates the performance of various reservoir fluid thermodynamic conditions, injection design variables, and economic recovery factors associated with CO2 injection.

  • In their draft NECPs, only Denmark, Italy and Netherlands have estimated annual CO2 injection capacity available in 2030, additional Member States are currently undergoing or planning to conduct assessments of their potential geological capacity.

  • Economic evaluations show that nitrogen injection is realistic provided that the gas condensate reservoir is sufficiently rich (Donohoe andBuchanan, 1981; Eckles et al., 1981; Huang et al., 1986; Sanger and Hagoort, 1998).Carbon dioxide (CO2) injection is another promising technology for managing gas condensate reservoirs while extensively reducing greenhouse gas emissions.

  • The sub- stances are injected in varying intervals causing front like impulses whereas CO2 injection into a permanent storage will occur more or less at a steady flow rate without flooding substances.

  • While the requirements for each UIC injection well class address the specific practices and unique risks to USDWs posed by a specific well class, the Class VI requirements are tailored to the unique aspects of carbon dioxide injection for GS (e.g., large CO2 injection volumes, the buoyant and mobile nature of the Injectate, etc.) and EPA developed its RCRA conditional exclusion based upon injection in a UIC Class VI well.

  • This chapter describes both qualitatively and quantitatively relative permeability, mobility ratio, displacement front stability, and recovery performance of CO2 injection into gas condensate reservoirs.

  • GHG Emissions from fuel combustion, electricity use and embodied (upstream) emissions of fuels must be restricted to CO2 injection, separation and recycling operations only.

  • In the case of CO2 injection operations in depleted oil and gas reservoirs/saline formations, fugitive CO2 and CH4 emissions from equipment must be calculated using the equipment count method described in Appendix A(1).

  • CO2 injection to enhance oil recovery has been conducted since the 1970’s.

  • This project is recorded as one of those which injected the largest amounts of CO2 so far, globally.17In this project, CO2 injection facilitates enhanced oil recovery (EOR).

Related to CO2 injection

  • Injection means the pressurized placement of septage waste below the surface of soil.

  • Injection well means a well into which fluids are injected. (See also “underground injection”.)

  • Exfiltration means any unauthorized release of data from within an information system. This includes copying the data through covert network channels or the copying of data to unauthorized media.

  • Infiltration means water other than wastewater that enters a sewer system (including sewer system and foundation drains) from the ground through such means as defective pipes, pipe joints, connections, or manholes. Infiltration does not include, and is distinguished from, inflow.

  • Filtration means a process for removing particulate matter from water by passage through porous media.

  • Emission means a release of air contaminants into the ambient air.

  • Nitrogen oxides means nitric oxide and nitrogen dioxide, expressed as nitrogen dioxide (NO2);

  • Production Environment means a logical group of virtual or physical computers comprised within the Cloud Environment to which the Customer will be provided with access and use the purchased Cloud Application(s) in production and for its generally marketed purpose.

  • Infiltrative surface means designated interface where effluent moves from distribution media or a distribution product into treatment media or original soil. In standard trench or bed systems this will be the interface of the distribution media or product and in-situ soil. Two separate infiltrative surfaces will exist in a mound system and an unlined sand filter, one at the interface of the distribution media and fill sand, the other at the interface of the fill sand and in-situ soil.

  • Landfill Gas means any gas derived through any biological process from the decomposition of waste buried within a waste disposal site.

  • Seepage pit means an excavation deeper than it is wide that receives septic tank effluent and from which the effluent seeps from a structural internal void into the surrounding soil through the bottom and openings in the side of the pit.

  • CO2 means carbon dioxide.

  • Diatomaceous earth filtration means a process resulting in substantial particulate removal in which a precoat cake of diatomaceous earth filter media is deposited on a support membrane (septum), and while the water is filtered by passing through the cake on the septum, additional filter media known as body feed is continuously added to the feed water to maintain the permeability of the filter cake.

  • Incineration means an engineered process involving burning or combustion of solid waste to thermally degrade waste materials at high temperatures;

  • Semisolid means a product that, at room temperature, will not pour, but will spread or deform easily, including but not limited to gels, pastes, and greases.

  • Slug means any discharge of water, sewage, or industrial waste which in concentration of any given constituent or in quantity of flow exceeds for any period of duration longer than fifteen (15) minutes more than five (5) times the average twenty-four (24) hour concentration or flows during normal operation.

  • Process Wastewater means any water which, during manufacturing or processing, comes into direct contact with or results from the production or use of any raw material, intermediate product, finished product, by-product, or waste product.

  • Dumping means a private enterprise resident outside of the RSA market its goods on own initiative in the RSA at lower prices than that of the Country of Origin and which have the potential to harm the local industries in the RSA.