Building Compliance definition
Examples of Building Compliance in a sentence
The works complies with the following codes and standards: 240-56364535, Architectural Design and Green Building Compliance Manual 240-56364545, Structural Design and Engineering Standard 240-107981296, Constructability Assessment Guideline SANS 1200, Standardised specification for civil engineering construction SANS 2001, Construction Works The equivalent continuous rating level for ambient noise is as specified in SANS 10103.
Building Compliance The landlord will be responsible for general compliance items such as fire alarms, water testing, electrical testing with some limitations e.g weekly tests to be carried out by the CIC Alienation Fairfield House Assignment and subletting will not be permitted.
The Seller shall obtain a Building Compliance certificate at its costs from the Municipality of Windhoek in terms of Regulation 1 of the Municipality of Windhoek Building Regulations published under General Notice 57 of 28 April 1969 before transfer of the property to the Purchaser’s name.
Facilities and Building Compliance, including Fire Services • The space must be built (cold and warm shell) to achieve a Class 9 Classification under the National Construction Code • Airconditioning throughout the fit out, able to be programmed in zones and times to suit operational requirements.
The Tenant must, at its Cost, comply with all Laws, Standards and Requirements in relation to sprinklers, fire alarms and fire prevention in respect of the Premises beyond the Base Building Compliance Level (which is the Landlord’s responsibility).
Including but not limited to; Energy Management, Building Compliance, Contract Management, Leasing, Spatial Planning.
Landlord shall have the obligation to bring elements of the Base Building into compliance with applicable laws (including, without limitation, Environmental Laws as hereinafter defined, but subject to the other provisions of this lease governing Tenant’s use of Hazardous Materials) except to the extent such compliance is required as a result of any Tenant Base Building Compliance Obligations.
All Civil and Structural designs are in accordance with the following Employer’s Design Standards: • 240-56364545: Structural Design and Engineering Standard • 240-107981296: Constructability Assessment Guideline • 240-56364535: Architectural Design and Green Building Compliance Manual • Currently, the power supplies are located on the roof of the ESP structure.