Basic Sediment and Water definition

Basic Sediment and Water means the suspended sediments, dissolved water and suspended water in the oil. The water and sediments shall be identified respectively according to ASTM D4006 and ASTM D473. The amount of basic sediment and water is the sum of the two and shall be generally shown in percentage.
Basic Sediment and Water means the suspended sediments, dissolved water and

Examples of Basic Sediment and Water in a sentence

  • When reporting oil volumes for royalty purposes, corrections must have been made for Basic Sediment and Water (BS&W) and other impurities.

  • Contaminant content means all non-hydrocarbon materials, such as Basic Sediment and Water (BS&W) and other impurities.

  • Correction for Basic Sediment and Water (BS & W) shall be made in accordance with the methods specified in the joint ASTM-API method, “Standard method of test for water and sediment in crude oils,” ASTM designation: D96-63, API standard: 2542.

  • Finally, the process may be subject to a manifold of constraints [10,35] such as export specifications for crude oil, usually RVP/TVP [1,10], but also Basic Sediment and Water (BS&W), salt content, etc., and gas export requirements such as max.

  • Sample collected for Buyer shall be sent to Buyer’s laboratory to calculate Basic Sediment and Water (BS&W).

  • Basic Sediment and Water (BS&W) Monitor: See section BS&W MONITOR for complete description.

  • In addition, the Basic Sediment and Water ("BS&W") content, determined in accordance with Article VII 5 hereof, shall be deducted from the quantity loaded, for purposes of preparing the Bill xx Lading for such shipment and for purposes of substantiating claims about Quantity and Quality.

  • It includes the quantity after adjustment of Basic Sediment and Water (BS&W)’.

  • Sample collected for Buyer shall be sent to Buyer’s laboratory to calculate Basic Sediment and Water (“BS&W”).

  • Two issues in particular need to be addressed to ensure the long-term integrity of TAPS: water in the TAPS stream and deposition of crude oil solids (i.e., wax) on the pipeline wall.o The present pipeline specification allowing crude oil containing up to 0.35% Basic Sediment and Water (BS&W) to enter TAPS is based on an average and does not prevent free water and water slugs from entering the TAPS crude stream.

Related to Basic Sediment and Water

  • Ground water means water below the land surface in a zone of saturation.

  • Sediment means solid material, mineral or organic, that is in suspension, is being transported, or has been moved from its site of origin by air, water or gravity as a product of erosion.

  • Bottled water means water that is placed in a safety sealed container or package for

  • Bulk gasoline plant means a gasoline storage and distribution facility with an average daily throughput of 20,000 gallons (76,000 liters) of gasoline or less on a 30-day rolling average.

  • Finished water means the water that is introduced into the distribution system of a public water system and is intended for distribution and consumption without further treatment, except as treatment necessary to maintain water quality in the distribution system (e.g., booster disinfection, addition of corrosion control chemicals).

  • inland waters means the navigable waters of the United States shoreward of the navigational demarcation lines dividing the high seas from harbors, rivers, and other inland waters of the United States and the waters of the Great Lakes on the United States side of the International Boundary;

  • Navigable waters ’ means the waters of the United States, including the territorial sea;

  • Transportation project means any project that the department is authorized by law to undertake including but not limited to a highway, tollway, bridge, mass transit, intelligent transportation system, traffic management, traveler information services, or any other project for transportation purposes.

  • Potable water means water that is fit for human consumption;

  • Bulk gasoline terminal means a gasoline storage facility which receives gasoline from its supply source primarily by pipeline, ship, or barge, and delivers gasoline to bulk gasoline plants or to commercial or retail accounts primarily by tank truck; and has an average daily throughput of more than 76,000 liters (20,000 gallons) of gasoline.

  • Submerged fill pipe means any fill pipe the discharge opening of which is entirely submerged when the liquid level is six inches [15.24 centimeters] above the bottom of the tank; or when applied to a tank which is loaded from the side, means any fill pipe the discharge opening of which is entirely submerged when the liquid level is one and one-half times the fill pipe diameter in inches [centimeters] above the bottom of the tank.

  • Diatomaceous earth filtration means a process resulting in substantial particulate removal in which a precoat cake of diatomaceous earth filter media is deposited on a support membrane (septum), and while the water is filtered by passing through the cake on the septum, additional filter media known as body feed is continuously added to the feed water to maintain the permeability of the filter cake.

  • Delivery Points means: (i) for natural gas transported by interstate pipelines, the city gate stations of your Utility, and (ii) for electricity, one or more points at which Company, as your agent, has arranged for the delivery of electricity to a third party (such as your Utility) for your account or at your premises.

  • Septic tank means a water tight tank designed to receive sewage and to effect the adequate decomposition of organic matter in sewage by bacterial action;

  • Produced water means water extracted from the earth from an oil or natural gas production well, or that is separated from oil or natural gas after extraction.

  • True vapor pressure means the equilibrium partial pressure exerted by a petroleum liquid as determined in accordance with methods described in American Petroleum Institute (API) Bulletin 2517, Evaporation Loss from External Floating Roof Tanks, 1980. The API procedure may not be applicable to some high viscosity or high pour crudes. Available estimates of true vapor pressure may be used in special cases such as these.

  • Drip irrigation means any non-spray low volume irrigation system utilizing emission devices with a flow rate measured in gallons per hour. Low volume irrigation systems are specifically designed to apply small volumes of water slowly at or near the root zone of plants.

  • Low water pressure means water pressure below the regulatory reference level which is the minimum pressure when demand on the system is not abnormal.

  • Interconnection Point means the point(s) of connection(s) at which the project is connected to the grid i.e. it shall be at 11 / 22 kV bus bar level of substation of MSEDCL.

  • Delivery Point means the point(s) of connection(s) at which energy is delivered into the Grid System i.e. the Interconnection Point.

  • Electricity Supply Code means the Electricity Supply Code specified under section 50;

  • Reid vapor pressure means the vapor pressure of crude oil or other volatile petroleum products at 100 degrees Fahrenheit as determined by the latest edition of ASTM D6377 (RVPE): Standard Test Method for Determination of Vapor Pressure of Crude Oil.

  • Potable means water suitable for drinking by the public.

  • Evaporative emissions means the hydrocarbon vapours lost from the fuel system of a motor vehicle other than those from exhaust emissions;

  • Underground storage tank or “UST” means any one or combination of tanks (including underground pipes connected thereto) that is used to contain an accumulation of regulated substances, and the volume of which (including the volume of underground pipes connected thereto) is 10 percent or more beneath the surface of the ground. This term does not include any:

  • Plasma arc incinerator means any enclosed device using a high intensity electrical discharge or arc as a source of heat followed by an afterburner using controlled flame combustion and which is not listed as an industrial furnace.