Workmanship. 3.5.1 Every part of the Work shall be executed in accordance with the Contract Documents and submittals approved pursuant to paragraph 3.13 in a workerlike manner. All materials used in the Work shall be furnished in sufficient quantities to facilitate the proper and expeditious execution of the Work and shall be new except such materials as may be expressly provided in the Contract Documents to be otherwise.
Workmanship. All work under this Agreement shall be performed in a safe manner to a professional standard. The goal of performance under this Agreement is the suppression of wildland fire and other emergency incident responses. The Incident Commander may release from an incident assignment any Contractor employee deemed incompetent, careless, or otherwise objectionable including violation of Harassment Free Workplace Policy. It will be left to the discretion of the Incident Commander to demobilize an entire resource or to allow replacement of the noncompliant personnel. Documentation of the rationale for release will be provided to the CO subsequent to the action. Accordingly, the Contracting Officer may require, in writing, the Contractor remove from use under this Agreement, any employee found incompetent, careless, or otherwise objectionable including violation of Harassment Free Workplace Policy. The Contracting Officer may require other proof of mitigation. Misconduct may result in cancellation of this Agreement. If an employee or crew is terminated, quits, or otherwise is released from the incident for any reason, the Contractor is responsible for returning the employee(s) to the point of hire with a departure time from the Incident Command Post (ICP) no later than 12 hours or time specified by a government official following such decision. The Contractor may, at their discretion, provide such transportation, or request the Incident Management Team (IMT) to arrange for the transportation with all transportation costs deducted from Contractor's payment. If the Contractor does not act in a timely manner (i.e., Contractor's employee(s) not departing from the ICP for return to point of hire within the specified time period), the IMT has authority to transport said employee or arrange for employee's transportation and to deduct all such transportation costs from Contractor's payment.
Workmanship. The finished B5, B10 or B20 BioDiesel fuel blend shall be visually free from undissolved water, sediment, and suspended matter. It shall be clear and bright when tested in accordance with ASTM D 4176-04(2009), procedure 1 or 2.
Workmanship. Fuel shall be visually free from undissolved water, sediment, and suspended matter. It shall be clear and bright when tested in accordance with ASTM D 4176-04 (2009), procedure 1 or 2. Fuel oil shall NOT contain any alcohol.
Workmanship. The CONTRACTOR shall promptly correct or replace all work rejected by the OWNER as defective or as failing to conform to the Contract Documents whether observed before or after substantial completion and whether or not fabricated, installed or completed. The CONTRACTOR shall bear all costs of correcting such rejected work, including costs incurred for additional services made necessary thereby.
Workmanship. The work shall be carried out according to the specification referred to hereinafter and according to sound engineering practice. The decision of the Executive Engineer, in respect of workmanship will be final.
Workmanship. The entire work of fabrication, manufacture assembly and installation of equipment shall conform of high grade workmanship. All the equipment supplied and erected must be able to withstand the Atmospheric condition of Maximum ambient temperature 45 D.C. Maximum relative humidity 98% Corrosive atmosphere Hot and humid climate closer to sea coast. The Contractor has to carryout holes by chipping/core cuts in the floor slab if necessary for laying pipeline as per the requirements
Workmanship. Every part of the Contractor’s Work shall be executed in strict accordance with the Contract Documents in the most sound, workmanlike, and substantial manner. All workmanship shall be of the best of its several kinds, and all materials used in the Contractor’s Work shall be furnished in ample quantities to facilitate the proper and expeditious execution of the work, and shall be new except such materials as may be expressly provided in the Contract Documents to be otherwise.
Workmanship. All work provided by the Contractor shall conform to the latest requirements of Federal, State, City and County regulations. This includes but is not limited to Titles 17, 19 and 22 of the California Code of Regulations. Contractor is responsible for compliance with all applicable laws, codes, rules and regulations on connection with work performed under this Agreement. Any services performed by the Contractor will be inspected by the State after completion. The State is solely responsible for determining acceptability of the work performed and the operability of the equipment.
Workmanship. Contractor’s performance under this Agreement shall be done in a professional manner that meets or exceeds industry and professional standards of performance.
