Work Interface and Maintenance Clause Samples

The 'Work Interface and Maintenance' clause defines the responsibilities and procedures for coordinating work activities and maintaining the project site or equipment. It typically outlines how different contractors or parties must interact to avoid conflicts, ensure safety, and maintain clear communication during overlapping tasks. For example, it may require regular meetings to coordinate schedules or specify who is responsible for site upkeep during construction. This clause helps prevent misunderstandings, reduces the risk of delays or accidents, and ensures that maintenance standards are upheld throughout the project.
Work Interface and Maintenance. 6.1 During the term hereof, each of the Parties shall be solely responsible for maintenance of its own interface that is divided by Equipment Connection Point. The work and maintenance interface of each of the Parties are indicated in the diagram as follows: 6.2 Party A’s Maintenance Responsibilities 6.2.1 Party A shall contribute the software and hardware systems as necessary for its Mobile Communication Network and Value-added Service Platform. 6.2.2 Party A shall cooperate with Party B to connect Party A’s various Gateways or servers to the communication lines of Party B’s servers. 6.2.3 Party A shall be responsible for providing Party B with its standards for technology protocol and interface with respect to the Value-added Service. 6.2.4 Party A shall be responsible for maintaining the normal operation of network communication that are within the responsibility of Party A as shown in the diagram above, and assume responsibilities for network failures other than those attributable to Party B’s reasons. Party A shall have the right to restrict the transmission of any abnormal overloads of data or information which may affect the operation security of Party A’s network. 6.2.5 Party A shall have the right to control and adjust the Data Flow and Port of the Maintenance Interface that belongs to Party A, and notify Party B of the result thereof. 6.2.6 Party A shall have the right to conduct necessary testing and data statistics from time to time during the service operation period with respect to such services provided by Party B, and, based on the testing results, require Party B to carry out rectification in accordance with Party A’s Mobile Value-added Services management procedures. 6.2.7 Party A shall be responsible for providing Party B with the statistics of Data Flow with respect to Party B’s use of Communication Channels, and ensure the reliability and timeliness of such statistics. 6.2.8 Party A shall give a notice to Party B as soon as practicable prior to any transmission interruption caused by the debugging and maintenance of the Gateways or other network equipment or due to other foreseeable reasons, including specific reasons, time and period for interruption. 6.2.9 Party A shall ensure that Party B will be given notice within reasonable time upon the occurrence of any transmission interruption caused by problems with Gateways or other networks or any other unforeseeable reasons. 6.3 Party B’s Maintenance Responsibilities 6.3.1 Party B shall b...
View SourceView Similar (5)
Work Interface and Maintenance. 6.1 During the term of this Agreement, Party A and Party B shall take the point of junction as the boundary and respectively be responsible for the maintenance of their interfaces. The work and maintenance interface of the two parties will be shown as follows:
View SourceView Similar (2)
Work Interface and Maintenance. 6.1 During the term of this Agreement, both Parties are responsible for the maintenance of their respective interface with the connection point of equipments as the boundary. The work and maintenance interface of both Parties is shown in the following figure.
View Source

Related to Work Interface and Maintenance

  • USE AND MAINTENANCE (a) Lessee shall (i) use the Equipment solely in the conduct of its business, for the purpose for which the Equipment was designed, in a careful and proper manner and not discontinue use of the Equipment; (ii) operate, maintain, inspect, service, repair, overhaul and test the Equipment, and maintain all records, logs and other materials relating thereto, in accordance with (1) all maintenance and operating manuals or service agreements, whenever furnished or entered into, including any subsequent amendments, supplements, renewals or replacements thereof, issued by the manufacturer or service provider, (2) the requirements of all applicable insurance policies, (3) the Purchase Documents, so as to preserve all of Lessee's and Lessor's rights thereunder, including all rights to any warranties, indemnities or other rights or remedies, (4) Applicable Laws, and (5) consistent with the prudent practice of other similar companies in the same business as Lessee, but in any event, to no lesser standard than that employed by Lessee for comparable equipment owned or leased by it; (iii) not change the location of any Equipment as specified in the Equipment Schedule without the prior written consent of Lessor; (iv) not attach or incorporate the Equipment to or in any other item of equipment in such a manner that the Equipment may be deemed to have become an accession to or a part of such other item of equipment; (v) cause each principal item of the Equipment to be continually marked, in a plain and distinct manner, with the name of Lessor or its designee followed by the words "Owner and Lessor," or other appropriate words designated by Lessor on labels furnished by Lessor, and (vi) cause the Equipment to be kept and maintained in good operating condition and in the same condition as when delivered to Lessee hereunder, except for ordinary wear and tear resulting despite Lessee's full compliance with the terms hereof. With respect to Lessee's agreement in subclause (ii) above to maintain, inspect, service, repair, overhaul and test each item of Equipment in accordance with sub-subclauses (1), (3) and (5), Lessee shall undertake and be responsible for the foregoing in exchange for a credit to Lessee's rental obligations the amount of which has been calculated and agreed to by both Lessee and Lessor as fair and complete consideration for such undertaking and responsibility as it may now and hereafter exist (including the payment of all charges, fees, costs and expenses relating thereto), and accounted for in the amount of Basic Rent Lessee has agreed to pay for such item of Equipment by its execution and delivery of the Equipment Schedule relating thereto. In furtherance of the foregoing, Lessee acknowledges and agrees that (A) the credit provided for in the preceding sentence shall fully discharge Lessor for all purposes from performing or complying with any of the obligations specified in such sentence (to the extent Lessor would be deemed to have had any responsibility therefor), and (B) it shall also undertake, be responsible for and otherwise fully perform and comply with all of the obligations provided for herein that are not specified in the preceding sentence, and that it shall not be entitled to any credit or other compensation with respect thereto, nor shall Lessor have any responsibility to Lessee or any other person with respect to the performance or non-performance of, or compliance or non-compliance with, any of such obligations, or any other obligations not expressly assumed by it hereunder. (b) If any parts of the Equipment become worn out, lost, destroyed, damaged beyond repair or otherwise permanently rendered unfit for use, Lessee, at its own expense, will within a reasonable time replace such parts with replacement parts that are free and clear of all Liens and have a value and utility at least equal to the value, condition and utility that such replaced parts would have had if maintained in the condition and repair required by the terms hereof. In the event that any Applicable Law requires alteration or modification to the Equipment, Lessee will conform thereto or obtain conformance therewith, and shall otherwise cause the altered or modified Equipment to comply with the provisions hereof. With respect to parts, additions or improvements which are added to the Equipment that are essential to the operation of the Equipment, are necessary to cause it to be in compliance with the provisions of this Lease or which cannot be detached from the Equipment without materially interfering with the operation of the Equipment or adversely affecting the value, condition and utility which the Equipment would have had without the addition thereof, title thereto shall immediately vest in Lessor to the same extent and with the same priority as Lessor holds in the Equipment, without cost or expense to Lessor, or any further action by any other person, and such parts, improvement and additions shall be deemed incorporated in the Equipment and subject to the terms of this Lease as if originally leased hereunder. Lessor agrees that upon Lessee's replacing a part in full compliance with the provisions of this subsection (b), all of Lessor's right, title and interest in and to any part so replaced shall without further action vest in Lessee "AS IS, WHERE IS," and otherwise subject to the provisions of Section 7 hereof. Lessee shall not make any material alterations to the Equipment without the prior written consent of Lessor, which consent shall not be unreasonably withheld. (c) Upon the twenty-four (24) hours' written or telephonic request of Lessor, Lessee shall provide to Lessor any information reasonably requested by Lessor pertaining to the Equipment or Lessee, including, the location and condition of the Equipment. Upon reasonable advance notice (which the parties agree shall be no less than forty-eight (48) hours' written or telephonic request) Lessee shall afford Lessor access to Lessee's premises where the Equipment is located for the purpose of inspecting such Equipment, all applicable maintenance and other records, Permits, licenses and any notices or directives from any manufacturer, vendor, service provider or Governmental Authority, at any reasonable time during normal business hours; provided, however, if a Default or default shall have occurred and be continuing, no notice of any inspection by Lessor shall be required. In the event Lessee fails or is unable to perform any of its obligations hereunder, Lessor shall have the right, but not the obligation, to perform the same, and Lessee shall forthwith reimburse Lessor on an after-tax basis, as Supplemental Rent, for all costs and expenses incurred by Lessor in performing the same. Lessor shall not have any duty to make or cause to be made any inspection, repair, restoration, replacement, renewal, addition or improvement of any nature or description with respect to the Equipment, or the related property or to incur any cost or expense in connection with any Lease Document and Lessor shall not incur any liability or obligation to any person by reason of Lessor's doing, causing to be done or failing to do any of the foregoing, in its discretion.

  • Support and Maintenance Where Licensee purchases support and/or maintenance services, Licensee’s initial support and/or maintenance term will begin upon delivery to Licensee of the Licensed Software and continue for one (1) year thereafter (or the length of the term if less than a year for any subscription/term license) unless otherwise specified in the applicable annual support and/or maintenance agreement, Product Order, or other written agreement executed between Licensor and Licensee. Where Licensee purchases support and/or maintenance for any Licensed Software, Licensee hereby agrees that it shall purchase such support and/or maintenance services for all of Licensee’s licensed units of such Licensed Software product. Support and/or maintenance services provided by Licensor will be subject to Licensor’s then current applicable standard annual support and/or maintenance agreement unless otherwise agreed by the parties in writing.

  • Construction and Maintenance There are on-going maintenance, renovation and construction projects taking place in and around the residences. The work typically takes place during regular business hours, but may begin earlier or extend into evenings or weekends. On-going construction or renovation projects will continue through midterm and final exam periods. The University will take measures to ensure that prudent construction practices are followed, but there may be noise, dust and temporary interruption of some services. Residents may be required to temporarily or permanently relocate to facilitate construction or renovation to their residence area. There will be no compensation or reduction to your residence fees due to disruption and/or relocation.

  • Outages and Maintenance In the event that a Registry Operator plans maintenance, it will provide notice to the ICANN emergency operations department, at least, twenty-four (24) hours ahead of that maintenance. ICANN’s emergency operations department will note planned maintenance times, and suspend Emergency Escalation services for the monitored services during the expected maintenance outage period. If Registry Operator declares an outage, as per its contractual obligations with ICANN, on services under a service level agreement and performance requirements, it will notify the ICANN emergency operations department. During that declared outage, ICANN’s emergency operations department will note and suspend emergency escalation services for the monitored services involved.

  • Installation and Maintenance Except for the bi‐directional and production metering equipment owned by the City, all equipment on Customer’s side of the delivery point, including the required disconnect device, shall be provided and maintained in satisfactory operating condition by Customer and shall remain the property and responsibility of the Customer. The City will bear no responsibility for the installation or maintenance of Customer’s equipment or for any damage to property as a result of any failure or malfunction thereof. The City shall not be liable, directly or indirectly for permitting or continuing to allow the interconnection of the Facility or for the acts or omissions of Customer or the failure or malfunction of any equipment of Customer that causes loss or injury, including death, to any party.