Wood Pole Sample Clauses
Wood Pole. Wood poles shall be drilled so that the distance from the sidewalk to the bottom of the pole plate shall be twenty three (23) feet for a standard bracket, or of such other height as directed by NYCDOT. Brackets shall be installed on poles using through bolt and special washers for head support and 1/2 inch x 4 inch lag screws for scroll support where required. Brackets shall be set at right angles to the curb, unless otherwise specified. Brackets installed on poles situated on the corner of street intersections, shall be installed in such a manner that a luminaire is suspended in proper position; shims or gains on pole, if necessary, may be used for this purpose. The Contractor shall furnish the through bolts, special washers and lag screws. The Contractor shall furnish all labor and material necessary for the relocation or adjustment of a bracket on a wood pole or on a wall. Bracket and arm for Traffic M-2 lamppost will be furnished by the City.
Wood Pole. A wood pole, class 5 minimum, thirty five (35) feet long, electrical conductors, and conduit, where necessary, provided such pole does not support any electrical conductors or equipment other than those required for service to the lighting unit installed on such pole, and provided that the electrical conductors shall be terminated at such pole.
Wood Pole. Pole shall be drilled so the distance from the sidewalk to the bottom of the pole plate shall be 23 feet for a standard bracket, or of such other height when so directed. Bracket shall be installed on pole using through bolt and special washers for head support and 1/2 inch x 4 inch lag screws for scroll support where required. Bracket shall be set at right angles to curb, unless otherwise specified. Bracket installed on pole situated on corner of street intersection, shall be installed in such a manner that luminaire or lamp fixture is suspended in proper position; shims or gains on pole, if necessary, may be used for this purpose. The Contractor shall furnish the through bolts, special washers and lag screws. The Contractor shall furnish all labor and material necessary for the relocation or adjustment of a bracket on a wood pole or on a wall. Bracket and arm for Traffic M-2 lamppost will be furnished by the City.
Wood Pole. Item 24.01.01 Install steel bracket on wood pole as per DWG J-3585. Item 24.01.04 Remove bracket luminaire and control, if any from wood pole. Item 24.01.06 Furnish fabricated steel 8ft bracket with hardware on wood pole as per DWG #J-3585. Item 24.01.07 Furnish and install aluminum bracket 12ft or 15ft long with hardware on wood pole.