Common use of Unit Price Changes Clause in Contracts

Unit Price Changes. If a change is ordered in an item of work covered by a Contract Unit Price, and such change does not involve substantial change in character of the work from that shown on the Plans or Special Provisions, then an adjustment in payment will be made. This adjustment will be based upon the increase or decrease in quantity and the Contract Unit Price. If the actual quantity of an item of work covered by a Contract Unit Price and constructed in conformance with the Plans and Special Provisions varies from the GMP Proposal quantity by 25% or less, payment will be made at the Contract Unit Price. If the actual quantity of the item of work varies from the GMP Proposal quantity by more than 25%, then payment will be made as described in Subsection (a) “Increases of More than 25%,” or Subsection (b) “Decreases of More than 25%,” below, as appropriate. If a change is ordered in an item of work covered by a Contract Unit Price, and such change involves a substantial change in the character of the work from that shown on the Plans or Special Provisions, an adjustment in payment will be made as described in Subsection (c) “Substantial Change in Character of the Work,” below. (a) Increases of More than 25%: Should the actual quantity of an item of work covered by a Contract Unit Price and constructed in conformance with the Plans and Special Provisions exceed the GMP Proposal quantity by more than 25%, then payment for the quantity in excess of 125% of the GMP Proposal quantity will be made on the basis of an adjustment in the Contract Unit Price mutually agreed to by the D-BE and Owner or, at the option of Owner, on the basis of Time and Materials Change Orders, described above. However, in no event will payment be more than would be paid for the actual quantity at the Contract Unit Price. (b) Decreases of More than 25%: Should the actual quantity of an item of work covered by a Contract Unit Price, and constructed in conformance with the Plans and Special Provisions, be less than 75% of the GMP Proposal quantity, then an adjustment in payment will not be made unless D-BE requests an adjustment in writing and adequately demonstrates that the reduction in quantity has increased D-BE's per-unit cost of performing the work item. If D-BE so requests, payment will be made on the basis of an adjustment in the Contract Unit Price mutually agreed to by D-BE and Owner, or at the option of Owner, on the basis of Time and Materials Change Orders, described above. However, in no case will payment be less than would be made for the actual quantity at the Contract Unit Price nor more than would be paid for 75% of the GMP Proposal quantity at the Contract Unit Price. (c) Substantial Change in Character of Work: If a change in an item of work covered by a Contract Unit Price involves a substantial change in the character of work from that shown on the Plans or Special Provisions, then an adjustment to the payment for the Work may be made by mutual agreement of D-BE and Owner as an adjustment to the Contract Unit Price, as a Lump Sum Change Order, or at Owner's option as a Time and Materials Change Order, as described above.

Unit Price Changes. If a change is ordered in an item of work covered by a Contract Unit Price, and such change does not involve substantial change in character of the work from that shown on the Plans or Special Provisions, then an adjustment in payment will be made. This adjustment will be based upon the increase or decrease in quantity and the Contract Unit Price. If the actual quantity of an item of work covered by a Contract Unit Price and constructed in conformance with the Plans and Special Provisions varies from the GMP Proposal quantity by 25% or less, payment will be made at the Contract Unit Price. If the actual quantity of the item of work varies from the GMP Proposal quantity by more than 25%, then payment will be made as described in Subsection (a) “Increases of More than 25%,” or Subsection (b) “Decreases of More than 25%,” below, as appropriate. If a change is ordered in an item of work covered by a Contract Unit Price, and such change involves a substantial change in the character of the work from that shown on the Plans or Special Provisions, an adjustment in payment will be made as described in Subsection (c) “Substantial Change in Character of the Work,” below. (a) 14.2.11.1 Increases of More than 25%: Should the actual quantity of an item of work covered by a Contract Unit Price and constructed in conformance with the Plans and Special Provisions exceed the GMP Proposal quantity by more than 25%, then payment for the quantity in excess of 125% of the GMP Proposal quantity will be made on the basis of an adjustment in the Contract Unit Price mutually agreed to by the D-BE and Owner OWNER or, at the option of OwnerOWNER, on the basis of Time and Materials Change Orders, described above. However, in no event will payment be more than would be paid for the actual quantity at the Contract Unit Price. (b) 14.2.11.2 Decreases of More than 25%: Should the actual quantity of an item of work covered by a Contract Unit Price, and constructed in conformance with the Plans and Special Provisions, be less than 75% of the GMP Proposal quantity, then an adjustment in payment will not be made unless D-BE requests an adjustment in writing and adequately demonstrates that the reduction in quantity has increased D-BE's per-unit cost of performing the work item. If D-BE so requests, payment will be made on the basis of an adjustment in the Contract Unit Price mutually agreed to by D-BE and OwnerOWNER, or at the option of OwnerOWNER, on the basis of Time and Materials Change Orders, described above. However, in no case will payment be less than would be made for the actual quantity at the Contract Unit Price nor more than would be paid for 75% of the GMP Proposal quantity at the Contract Unit Price. (c) Substantial Change in Character of Work: If a change in an item of work covered by a Contract Unit Price involves a substantial change in the character of work from that shown on the Plans or Special Provisions, then an adjustment to the payment for the Work may be made by mutual agreement of D-BE and Owner as an adjustment to the Contract Unit Price, as a Lump Sum Change Order, or at Owner's option as a Time and Materials Change Order, as described above.

Unit Price Changes. If a change is ordered in an item of work covered by a Contract Unit Price, and such change does not involve substantial change in character of the work from that shown on the Plans or Special Provisions, then an adjustment in payment will be made. This adjustment will be based upon the increase or decrease in quantity and the Contract Unit Price. If the actual quantity of an item of work covered by a Contract Unit Price and constructed in conformance with the Plans and Special Provisions varies from the GMP Proposal Bid quantity by 25% or less, payment will be made at the Contract Unit Price. If the actual quantity of the item of work varies from the GMP Proposal Bid quantity by more than 25%, then payment will be made as described in Subsection (a) “Increases of More than 25%,” or Subsection (b) “Decreases of More than 25%,” below, as appropriate. If a change is ordered in an item of work covered by a Contract Unit Price, and such change involves a substantial change in the character of the work from that shown on the Plans or Special Provisions, an adjustment in payment will be made as described in Subsection (c) “Substantial Change in Character of the Work,” below. (a) Increases of More than 25%: Should the actual quantity of an item of work covered by a Contract Unit Price and constructed in conformance with the Plans and Special Provisions exceed the GMP Proposal Bid quantity by more than 25%, then payment for the quantity in excess of 125% of the GMP Proposal Bid quantity will be made on the basis of an adjustment in the Contract Unit Price mutually agreed to by the D-BE ▇▇▇▇ and Owner or, at the option of Owner, on the basis of Time and Materials Change Orders, described above. However, in no event will payment be more than would be paid for the actual quantity at the Contract Unit Price. (b) Decreases of More than 25%: Should the actual quantity of an item of work covered by a Contract Unit Price, and constructed in conformance with the Plans and Special Provisions, be less than 75% of the GMP Proposal Bid quantity, then an adjustment in payment will not be made unless D-BE ▇▇▇▇ requests an adjustment in writing and adequately demonstrates that the reduction in quantity has increased D-BE's ▇▇▇▇'▇ per-unit cost of performing the work item. If D-BE ▇▇▇▇ so requests, payment will be made on the basis of an adjustment in the Contract Unit Price mutually agreed to by D-BE ▇▇▇▇ and Owner, or at the option of Owner, on the basis of Time and Materials Change Orders, described above. However, in no case will payment be less than would be made for the actual quantity at the Contract Unit Price nor more than would be paid for 75% of the GMP Proposal Bid quantity at the Contract Unit Price. (c) Substantial Change in Character of Work: If a change in an item of work covered by a Contract Unit Price involves a substantial change in the character of work from that shown on the Plans or Special Provisions, then an adjustment to the payment for the Work may be made by mutual agreement of D-BE and Owner as an adjustment to the Contract Unit Price, as a Lump Sum Change Order, or at Owner's option as a Time and Materials Change Order, as described above.

Unit Price Changes. If a change is ordered in an item of work covered by a Contract Unit Price, and such change does not involve substantial change in character of the work from that shown on the Plans or Special Provisions, then an adjustment in payment will be made. This adjustment will be based upon the increase or decrease in quantity and the Contract Unit Price. If the actual quantity of an item of work covered by a Contract Unit Price and constructed in conformance with the Plans and Special Provisions varies from the GMP Proposal Bid quantity by 25% or less, payment will be made at the Contract Unit Price. If the actual quantity of the item of work varies from the GMP Proposal Bid quantity by more than 25%, then payment will be made as described in Subsection (a) “Increases of More than 25%,” or Subsection (b) “Decreases of More than 25%,” below, as appropriate. If a change is ordered in an item of work covered by a Contract Unit Price, and such change involves a substantial change in the character of the work from that shown on the Plans or Special Provisions, an adjustment in payment will be made as described in Subsection (c) “Substantial Change in Character of the Work,” below. (a) A. Increases of More than 25%: Should the actual quantity of an item of work covered by a Contract Unit Price and constructed in conformance with the Plans and Special Provisions exceed the GMP Proposal Bid quantity by more than 25%, then payment for the quantity in excess of 125% of the GMP Proposal Bid quantity will be made on the basis of an adjustment in the Contract Unit Price mutually agreed to by the D-BE and Owner County or, at the option of OwnerCounty, on the basis of Time and Materials Change Orders, described above. However, in no event will payment be more than would be paid for the actual quantity at the Contract Unit Price. (b) B. Decreases of More than 25%: Should the actual quantity of an item of work covered by a Contract Unit Price, and constructed in conformance with the Plans and Special Provisions, be less than 75% of the GMP Proposal Bid quantity, then an adjustment in payment will not be made unless D-D- BE requests an adjustment in writing and adequately demonstrates that the reduction in quantity has increased D-BE's per-unit cost of performing the work item. If D-BE so requests, payment will be made on the basis of an adjustment in the Contract Unit Price mutually agreed to by D-D- BE and OwnerCounty, or at the option of OwnerCounty, on the basis of Time and Materials Change Orders, described above. However, in no case will payment be less than would be made for the actual quantity at the Contract Unit Price nor more than would be paid for 75% of the GMP Proposal Bid quantity at the Contract Unit Price. (c) Substantial Change in Character of Work: If a change in an item of work covered by a Contract Unit Price involves a substantial change in the character of work from that shown on the Plans or Special Provisions, then an adjustment to the payment for the Work may be made by mutual agreement of D-BE and Owner as an adjustment to the Contract Unit Price, as a Lump Sum Change Order, or at Owner's option as a Time and Materials Change Order, as described above.

Unit Price Changes. If a change is ordered in an item of work covered by a Contract Unit Price, and such change does not involve substantial change in character of the work from that shown on the Plans or Special Provisions, then an adjustment in payment will be made. This adjustment will be based upon the increase or decrease in quantity and the Contract Unit Price. If the actual quantity of an item of work covered by a Contract Unit Price and constructed in conformance with the Plans and Special Provisions varies from the GMP Proposal Bid quantity by 25% or less, payment will be made at the Contract Unit Price. If the actual quantity of the item of work varies from the GMP Proposal Bid quantity by more than 25%, then payment will be made as described in Subsection (a) “Increases of More than 25%,” or Subsection (b) “Decreases of More than 25%,” below, as appropriate. If a change is ordered in an item of work covered by a Contract Unit Price, and such change involves a substantial change in the character of the work from that shown on the Plans or Special Provisions, an adjustment in payment will be made as described in Subsection (c) “Substantial Change in Character of the Work,” below. (a) Increases of More than 25%: Should the actual quantity of an item of work covered by a Contract Unit Price and constructed in conformance with the Plans and Special Provisions exceed the GMP Proposal Bid quantity by more than 25%, then payment for the quantity in excess of 125% of the GMP Proposal Bid quantity will be made on the basis of an adjustment in the Contract Unit Price mutually agreed to by the D-BE Contractor and Owner County or, at the option of OwnerCounty, on the basis of Time and Materials Change Orders, described above. However, in no event will payment be more than would be paid for the actual quantity at the Contract Unit Price. (b) Decreases of More than 25%: Should the actual quantity of an item of work covered by a Contract Unit Price, and constructed in conformance with the Plans and Special Provisions, be less than 75% of the GMP Proposal Bid quantity, then an adjustment in payment will not be made unless D-BE Contractor requests an adjustment in writing and adequately demonstrates that the reduction in quantity has increased D-BEContractor 's per-unit cost of performing the work item. If D-BE Contractor so requests, payment will be made on the basis of an adjustment in the Contract Unit Price mutually agreed to by D-BE Contractor and OwnerCounty, or at the option of OwnerCounty, on the basis of Time and Materials Change Orders, described above. However, in no case will payment be less than would be made for the actual quantity at the Contract Unit Price nor more than would be paid for 75% of the GMP Proposal Bid quantity at the Contract Unit Price. (c) Substantial Change in Character of Work: If a change in an item of work covered by a Contract Unit Price involves a substantial change in the character of work from that shown on the Plans or Special Provisions, then an adjustment to the payment for the Work may be made by mutual agreement of D-BE Contractor and Owner County as an adjustment to the Contract Unit Price, as a Lump Sum Change Order, or at OwnerCounty's option as a Time and Materials Change Order, as described above.

Unit Price Changes. If a change is ordered in an item of work covered by a Contract Unit Price, and such change does not involve substantial change in character of the work from that shown on the Plans or Special ProvisionsTechnical Specifications, then an adjustment in payment will be made. This adjustment will be based upon the increase or decrease in quantity and the Contract Unit Price. If the actual quantity of an item of work covered by a Contract Unit Price and constructed in conformance with the Plans and Special Provisions Technical Specifications varies from the GMP Proposal Bid quantity by 25% or less, payment will be made at the Contract Unit Price. If the actual quantity of the item of work varies from the GMP Proposal Bid quantity by more than 25%, then payment will be made as described in Subsection (a) “Increases of More than 25%,” or Subsection (b) “Decreases of More than 25%,” below, as appropriate. If a change is ordered in an item of work covered by a Contract Unit Price, and such change involves a substantial change in the character of the work from that shown on the Plans or Special ProvisionsTechnical Specifications, an adjustment in payment will be made as described in Subsection (c) “Substantial Change in Character of the Work,” below. (a) Increases of More than 25%: Should the actual quantity of an item of work covered by a Contract Unit Price and constructed in conformance with the Plans and Special Provisions Technical Specifications exceed the GMP Proposal Bid quantity by more than 25%, then payment for the quantity in excess of 125% of the GMP Proposal Bid quantity will be made on the basis of an adjustment in the Contract Unit Price mutually agreed to by the D-BE Contractor and Owner County or, at the option of OwnerCounty, on the basis of Time and Materials Change Orders, described above. However, in no event will payment be more than would be paid for the actual quantity at the Contract Unit Price. (b) Decreases of More than 25%: Should the actual quantity of an item of work covered by a Contract Unit Price, and constructed in conformance with the Plans and Special ProvisionsTechnical Specifications, be less than 75% of the GMP Proposal Bid quantity, then an adjustment in payment will not be made unless D-BE Contractor requests an adjustment in writing and adequately demonstrates that the reduction in quantity has increased D-BEContractor's per-unit cost of performing the work item. If D-BE Contractor so requests, payment will be made on the basis of an adjustment in the Contract Unit Price mutually agreed to by D-BE Contractor and OwnerCounty, or at the option of OwnerCounty, on the basis of Time and Materials Change Orders, described above. However, in no case will payment be less than would be made for the actual quantity at the Contract Unit Price nor more than would be paid for 75% of the GMP Proposal Bid quantity at the Contract Unit Price. (c) Substantial Change in Character of Work: If a change in an item of work covered by a Contract Unit Price involves a substantial change in the character of work from that shown on the Plans or Special Provisions, then an adjustment to the payment for the Work may be made by mutual agreement of D-BE and Owner as an adjustment to the Contract Unit Price, as a Lump Sum Change Order, or at Owner's option as a Time and Materials Change Order, as described above.

Unit Price Changes. If a change is ordered in an item of work covered by a Contract Unit Price, and such change does not involve substantial change in character of the work from that shown on the Plans or Special Provisions, then an adjustment in payment will be made. This adjustment will be based upon the increase or decrease in quantity and the Contract Unit Price. If the actual quantity of an item of work covered by a Contract Unit Price and constructed in conformance with the Plans and Special Provisions varies from the GMP Proposal Bid quantity by 25% or less, payment will be made at the Contract Unit Price. If the actual quantity of the item of work varies from the GMP Proposal Bid quantity by more than 25%, then payment will be made as described in Subsection (a) “Increases “Increases of More than 25%,” 25%,” or Subsection (b) “Decreases “Decreases of More than 25%,” 25%,” below, as appropriate. If a change is ordered in an item of work covered by a Contract Unit Price, and such change involves a substantial change in the character of the work from that shown on the Plans or Special Provisions, an adjustment in payment will be made as described in Subsection (c) “Substantial “Substantial Change in Character of the Work,” Work,” below. (a) Increases of More than 25%: Should the actual quantity of an item of work covered by a Contract Unit Price and constructed in conformance with the Plans and Special Provisions exceed the GMP Proposal Bid quantity by more than 25%, then payment for the quantity in excess of 125% of the GMP Proposal Bid quantity will be made on the basis of an adjustment in the Contract Unit Price mutually agreed to by the D-BE and Owner County or, at the option of OwnerCounty, on the basis of Time and Materials Change Orders, described above. However, in no event will payment be more than would be paid for the actual quantity at the Contract Unit Price. (b) Decreases of More than 25%: Should the actual quantity of an item of work covered by a Contract Unit Price, and constructed in conformance with the Plans and Special Provisions, be less than 75% of the GMP Proposal Bid quantity, then an adjustment in payment will not be made unless D-BE requests an adjustment in writing and adequately demonstrates that the reduction in quantity has increased D-BE's per-per- unit cost of performing the work item. If D-BE so requests, payment will be made on the basis of an adjustment in the Contract Unit Price mutually agreed to by D-D- BE and OwnerCounty, or at the option of OwnerCounty, on the basis of Time and Materials Change Orders, described above. However, in no case will payment be less than would be made for the actual quantity at the Contract Unit Price nor more than would be paid for 75% of the GMP Proposal Bid quantity at the Contract Unit Price. (c) Substantial Change in Character of Work: If a change in an item of work covered by a Contract Unit Price involves a substantial change in the character of work from that shown on the Plans or Special Provisions, then an adjustment to the payment for the Work may be made by mutual agreement of D-BE and Owner as an adjustment to the Contract Unit Price, as a Lump Sum Change Order, or at Owner's option as a Time and Materials Change Order, as described above.

Unit Price Changes. If a change is ordered in an item of work covered by a Contract Unit Price, and such change does not involve substantial change in character of the work from that shown on the Plans or Special Provisions, then an adjustment in payment will be made. This adjustment will be based upon the increase or decrease in quantity and the Contract Unit Price. If the actual quantity of an item of work covered by a Contract Unit Price and constructed in conformance with the Plans and Special Provisions varies from the GMP Proposal quantity by 25% or less, payment will be made at the Contract Unit Price. If the actual quantity of the item of work varies from the GMP Proposal quantity by more than 25%, then payment will be made as described in Subsection (a) “Increases of More than 25%,” or Subsection (b) “Decreases of More than 25%,” below, as appropriate. If a change is ordered in an item of work covered by a Contract Unit Price, and such change involves a substantial change in the character of the work from that shown on the Plans or Special Provisions, an adjustment in payment will be made as described in Subsection (c) “Substantial Change in Character of the Work,” below. (a) Increases of More than 25%: Should the actual quantity of an item of work covered by a Contract Unit Price and constructed in conformance with the Plans and Special Provisions exceed the GMP Proposal quantity by more than 25%, then payment for the quantity in excess of 125% of the GMP Proposal quantity will be made on the basis of an adjustment in the Contract Unit Price mutually agreed to by the D-BE ▇▇▇▇ and Owner or, at the option of Owner, on the basis of Time and Materials Change Orders, described above. However, in no event will payment be more than would be paid for the actual quantity at the Contract Unit Price. (b) Decreases of More than 25%: Should the actual quantity of an item of work covered by a Contract Unit Price, and constructed in conformance with the Plans and Special Provisions, be less than 75% of the GMP Proposal quantity, then an adjustment in payment will not be made unless D-BE ▇▇▇▇ requests an adjustment in writing and adequately demonstrates that the reduction in quantity has increased D-BE's ▇▇▇▇'▇ per-unit cost of performing the work item. If D-BE ▇▇▇▇ so requests, payment will be made on the basis of an adjustment in the Contract Unit Price mutually agreed to by D-BE ▇▇▇▇ and Owner, or at the option of Owner, on the basis of Time and Materials Change Orders, described above. However, in no case will payment be less than would be made for the actual quantity at the Contract Unit Price nor more than would be paid for 75% of the GMP Proposal quantity at the Contract Unit Price. (c) Substantial Change in Character of Work: If a change in an item of work covered by a Contract Unit Price involves a substantial change in the character of work from that shown on the Plans or Special Provisions, then an adjustment to the payment for the Work may be made by mutual agreement of D-BE and Owner as an adjustment to the Contract Unit Price, as a Lump Sum Change Order, or at Owner's option as a Time and Materials Change Order, as described above.

Unit Price Changes. If a change is ordered in an item of work covered by a Contract Unit Price, and such change does not involve substantial change in character of the work from that shown on the Plans or Special Provisions, then an adjustment in payment will be made. This adjustment will be based upon the increase or decrease in quantity and the Contract Unit Price. If the actual quantity of an item of work covered by a Contract Unit Price and constructed in conformance with the Plans and Special Provisions varies from the GMP Proposal Bid quantity by 25% or less, payment will be made at the Contract Unit Price. If the actual quantity of the item of work varies from the GMP Proposal Bid quantity by more than 25%, then payment will be made as described in Subsection (a) “Increases of More than 25%,” or Subsection (b) “Decreases of More than 25%,” below, as appropriate. If a change is ordered in an item of work covered by a Contract Unit Price, and such change involves a substantial change in the character of the work from that shown on the Plans or Special Provisions, an adjustment in payment will be made as described in Subsection (c) “Substantial Change in Character of the Work,” below. (a) Increases of More than 25%: Should the actual quantity of an item of work covered by a Contract Unit Price and constructed in conformance with the Plans and Special Provisions exceed the GMP Proposal Bid quantity by more than 25%, then payment for the quantity in excess of 125% of the GMP Proposal Bid quantity will be made on the basis of an adjustment in the Contract Unit Price mutually agreed to by the D-BE and Owner County or, at the option of OwnerCounty, on the basis of Time and Materials Change Orders, described above. However, in no event will payment be more than would be paid for the actual quantity at the Contract Unit Price. (b) Decreases of More than 25%: Should the actual quantity of an item of work covered by a Contract Unit Price, and constructed in conformance with the Plans and Special Provisions, be less than 75% of the GMP Proposal Bid quantity, then an adjustment in payment will not be made unless D-BE requests an adjustment in writing and adequately demonstrates that the reduction in quantity has increased D-BE's per-unit cost of performing the work item. If D-BE so requests, payment will be made on the basis of an adjustment in the Contract Unit Price mutually agreed to by D-BE and OwnerCounty, or at the option of OwnerCounty, on the basis of Time and Materials Change Orders, described above. However, in no case will payment be less than would be made for the actual quantity at the Contract Unit Price nor more than would be paid for 75% of the GMP Proposal Bid quantity at the Contract Unit Price. (c) Substantial Change in Character of Work: If a change in an item of work covered by a Contract Unit Price involves a substantial change in the character of work from that shown on the Plans or Special Provisions, then an adjustment to the payment for the Work may be made by mutual agreement of D-BE and Owner as an adjustment to the Contract Unit Price, as a Lump Sum Change Order, or at Owner's option as a Time and Materials Change Order, as described above.

Unit Price Changes. If a change is ordered in an item of work covered by a Contract Unit Price, and such change does not involve substantial change in character of the work from that shown on the Plans or Special Provisions, then an adjustment in payment will be made. This adjustment will be based upon the increase or decrease in quantity and the Contract Unit Price. If the actual quantity of an item of work covered by a Contract Unit Price and constructed in conformance with the Plans and Special Provisions varies from the GMP Proposal Bid quantity by 25% or less, payment will be made at the Contract Unit Price. If the actual quantity of the item of work varies from the GMP Proposal Bid quantity by more than 25%, then payment will be made as described in Subsection (a) “Increases of More than 25%,” or Subsection (b) “Decreases of More than 25%,” below, as appropriate. If a change is ordered in an item of work covered by a Contract Unit Price, and such change involves a substantial change in the character of the work from that shown on the Plans or Special Provisions, an adjustment in payment will be made as described in Subsection (c) “Substantial Change in Character of the Work,” below. (a) Increases of More than 25%: Should the actual quantity of an item of work covered by a Contract Unit Price and constructed in conformance with the Plans and Special Provisions exceed the GMP Proposal Bid quantity by more than 25%, then payment for the quantity in excess of 125% of the GMP Proposal Bid quantity will be made on the basis of an adjustment in the Contract Unit Price mutually agreed to by the D-BE and Owner County or, at the option of OwnerCounty, on the basis of Time and Materials Change Orders, described above. However, in no event will payment be more than would be paid for the actual quantity at the Contract Unit Price. (b) Decreases of More than 25%: Should the actual quantity of an item of work covered by a Contract Unit Price, and constructed in conformance with the Plans and Special Provisions, be less than 75% of the GMP Proposal Bid quantity, then an adjustment in payment will not be made unless D-BE requests an adjustment in writing and adequately demonstrates that the reduction in quantity has increased D-BE's per-per- unit cost of performing the work item. If D-BE so requests, payment will be made on the basis of an adjustment in the Contract Unit Price mutually agreed to by D-D- BE and OwnerCounty, or at the option of OwnerCounty, on the basis of Time and Materials Change Orders, described above. However, in no case will payment be less than would be made for the actual quantity at the Contract Unit Price nor more than would be paid for 75% of the GMP Proposal Bid quantity at the Contract Unit Price. (c) Substantial Change in Character of Work: If a change in an item of work covered by a Contract Unit Price involves a substantial change in the character of work from that shown on the Plans or Special Provisions, then an adjustment to the payment for the Work may be made by mutual agreement of D-BE and Owner as an adjustment to the Contract Unit Price, as a Lump Sum Change Order, or at Owner's option as a Time and Materials Change Order, as described above.

Unit Price Changes. If a change is ordered in an item of work covered by a Contract Unit Price, and such change does not involve substantial change in character of the work from that shown on the Plans or Special Provisions, then an adjustment in payment will be made. This adjustment will be based upon the increase or decrease in quantity and the Contract Unit Price. If the actual quantity of an item of work covered by a Contract Unit Price and constructed in conformance with the Plans and Special Provisions varies from the GMP Proposal Bid quantity by 25% or less, payment will be made at the Contract Unit Price. If the actual quantity of the item of work varies from the GMP Proposal Bid quantity by more than 25%, then payment will be made as described in Subsection (a) “Increases of More than 25%,” , or Subsection (b) “Decreases of More than 25%,” , below, as appropriate. If a change is ordered in an item of work covered by a Contract Unit Price, and such change involves a substantial change in the character of the work from that shown on the Plans or Special Provisions, an adjustment in payment will be made as described in Subsection (c) “Substantial Change in Character of the Work,” , below. (a) Increases of More than 25%: Should the actual quantity of an item of work covered by a Contract Unit Price and constructed in conformance with the Plans and Special Provisions exceed the GMP Proposal Bid quantity by more than 25%, then payment for the quantity in excess of 125% of the GMP Proposal Bid quantity will be made on the basis of an adjustment in the Contract Unit Price mutually agreed to by the D-BE Contractor and Owner County or, at the option of OwnerCounty, on the basis of Time and Materials Change Orders, described above. However, in no event will payment be more than would be paid for the actual quantity at the Contract Unit Price. (b) Decreases of More than 25%: Should the actual quantity of an item of work covered by a Contract Unit Price, and constructed in conformance with the Plans and Special Provisions, be less than 75% of the GMP Proposal Bid quantity, then an adjustment in payment will not be made unless D-BE Contractor requests an adjustment in writing and adequately demonstrates that the reduction in quantity has increased D-BEContractor 's per-unit cost of performing the work item. If D-BE Contractor so requests, payment will be made on the basis of an adjustment in the Contract Unit Price mutually agreed to by D-BE Contractor and OwnerCounty, or at the option of OwnerCounty, on the basis of Time and Materials Change Orders, described above. However, in no case will payment be less than would be made for the actual quantity at the Contract Unit Price nor more than would be paid for 75% of the GMP Proposal Bid quantity at the Contract Unit Price. (c) Substantial Change in Character of Work: If a change in an item of work covered by a Contract Unit Price involves a substantial change in the character of work from that shown on the Plans or Special Provisions, then an adjustment to the payment for the Work may be made by mutual agreement of D-BE Contractor and Owner County as an adjustment to the Contract Unit Price, as a Lump Sum Change Order, or at OwnerCounty's option as a Time and Materials Change Order, as described above.