Transmission Method Sample Clauses

Transmission Method. If Merchant utilizes electronic Authorization and/or data capture services, Merchant will enter data related to a Card transaction into a computer terminal or magnetic stripe reading terminal no later than the close of business on the date the Card transaction is completed. If Merchant provides its own electronic terminal or similar device, such terminals must meet Servicers requirements for processing Card transactions. Information regarding a Card transaction transmitted with a computer or magnetic stripe reading terminal will be transmitted by Merchant to Servicers in the form Servicers from time to time specify or as required under the Rules. The means of transmission indicated in the Merchant Application shall be the exclusive means utilized by Merchant until Merchant has provided Servicers with at least thirty (30) days prior written notice of Merchant’s intention to change the means of such delivery or otherwise to alter in any material respect Merchant’s medium of transmission of data to Servicers.
Sample 1Sample 2Sample 3See All (8)
AutoNDA by SimpleDocs
Transmission Method. Information regarding a Transaction transmitted with a computer, magnetic stripe, or chip reading terminal will be transmitted by Merchant to Service Providers as specified by Service Providers. The means of transmission indicated in the Merchant Application shall be the exclusive means used by Merchant until Merchant has provided Service Providers with at least 30 days’ prior written notice of Merchant’s intention to change the means of such delivery or otherwise alter in any material respect Merchant’s medium of transmission of data to Service Providers. Service Providers shall have the right to refuse and cancel the agreement upon such notice.
Sample 1Sample 2See All (5)
Transmission Method. If Merchant utilizes electronic authorization and/or data capture services, Merchant will enter the data related to a sales or credit Transaction into a computer terminal or magnetic stripe reading terminal no later than the close of business on the date the Transaction is completed. If Merchant provides its own electronic terminal or similar device, such terminals must meet SPS’s and Bank’s requirements for processing Transactions. Information regarding a sales or credit Transaction transmitted with a computer or magnetic stripe reading terminal will be transmitted by Merchant to SPS or its agent(s) in the form SPS from time to time specifies, or as required under the Rules. If Bank and SPS request a copy of a Sales Draft, credit voucher or other Transaction evidence, Merchant will provide it within 3 business days following the request. The means of transmission indicated in the Application shall be the exclusive means utilized by Merchant until Merchant has provided SPS with at least 30 days prior written notice, with a copy to Bank, of Merchant’s intention to change the means of such delivery or otherwise to alter in any material respect Merchant’s medium of transmission of data to SPS.
Sample 1Sample 2
Transmission Method. If Merchant utilizes electronic authorization and/or data capture services, Merchant will enter data related to a sales or credit transaction into a computer terminal or magnetic stripe reading terminal no later than the close of business on the date the transaction is completed. If Merchant provides its own electronic terminal or similar device, such terminals must meet IMS requirements for processing transactions. Information regarding a sales or credit transaction transmitted with a computer or magnetic stripe reading terminal will be transmitted by Merchant to IMS or its Bank in the form IMS from time to time specifies or is required under the Rules. The means of transmission indicated in the Merchant Application shall be the exclusive means utilized by Merchant until Merchant has provided IMS and/or Bank with at least 30 days prior written notice of Xxxxxxxx’s intention to change the means of such delivery or otherwise to alter in any material respect Merchant’s medium of transmission of data to IMS.
Sample 1
Transmission Method. 15. The Parties both support best practice in relation to security and use of technology for transferring data. Updates to the processes in sections 15 – 19 of this Annex 3 can be made where the Parties agree on updated protocols and standards and the updated methods of transfer improve security for the transfer of information.
Sample 1
Transmission Method. If Merchant utilizes electronic authorization and/or data capture services, Merchant will enter data related to a sales or credit transaction into a computer terminal or magnetic stripe reading terminal no later than the close of business on the date the transaction is completed. If Merchant provides its own electronic terminal or similar device, such terminals must meet RMS requirements for processing transactions. Information regarding a sales or credit transaction transmitted with a computer or magnetic stripe reading terminal will be transmitted by Merchant to RMS in the form RMS from time to time specifies or is required under the Rules. If RMS requests a copy of a Sales Draft, credit voucher or other transaction evidence, Merchant will provide it within 3 business days following the request. The means of transmission indicated in the Merchant Application shall be the exclusive means utilized by Merchant until Merchant has provided RMS with at least 30 days prior written notice of Merchant’s intention to change the means of such delivery or otherwise to alter in any material respect Merchant’s medium of transmission of data to RMS.
Sample 1
Transmission Method. A. All notices required or permitted under this Contract shall be in writing and shall be deemed received if sent by one of the following means: upon receipt if delivered by hand; one day after being sent by an express courier with a reliable system for tracking delivery; three days after being sent by certified or registered first class mail, postage prepaid and return receipt requested; or upon confirmed facsimile transmission provided that a copy shall be sent by another of the foregoing means.
Sample 1
AutoNDA by SimpleDocs
Transmission Method. If Merchant utilizes electronic authorization and/or data capture services, Merchant will enter the data related to a sales or credit Transaction into a computer terminal or magnetic stripe reading terminal no later than the close of business on the date the Transaction is completed. If Merchant provides its own electronic terminal or similar device, such terminals must meet Paya’s and Bank’s requirements for processing Transactions. Information regarding a sales or credit Transaction transmitted with a computer or magnetic stripe reading terminal will be transmitted by Merchant to Paya or its agent(s) in the form Paya from time to time specifies, or as required under the Rules. If Bank and Paya request a copy of a Sales Draft, credit voucher or other Transaction evidence, Merchant will provide it within 3 business days following the request. The means of transmission indicated in the Application shall be the exclusive means utilized by Merchant until Merchant has provided Paya with at least 30 days prior written notice, with a copy to Bank, of Merchant’s intention to change the means of such delivery or otherwise to alter in any material respect Merchant’s medium of transmission of data to Paya.
Sample 1
Transmission Method. If Merchant utilizes electronic authorization and/or data capture services, Merchant will enter the data related to a sales or credit transaction into a computer terminal or magnetic stripe reading terminal no later than the close of business on the date the transaction is completed. If Merchant provides its own electronic terminal or similar device, such terminals must meet Cornerstone’s and Bank’s requirements for processing transactions. Information regarding a sales or credit transaction transmitted with a computer or magnetic stripe reading terminal will be transmitted by Merchant to Cornerstone or its agent(s) in the form Cornerstone from time to time specifies, or as required under the Rules. If Bank and Cornerstone request a copy of a Sales Draft, credit voucher or other transaction evidence, Merchant will provide it within 3 business days following the request. The means of transmission indicated in the Merchant Application shall be the exclusive means utilized by Merchant until Merchant has provided Cornerstone with at least 30 days prior written notice, with a copy to Bank, of Merchant’s intention to change the means of such delivery or otherwise to alter in any material respect Merchant medium of transmission of data to Cornerstone.
Sample 1

Related to Transmission Method

  • Loop Transmission Types 3.1 Subject to the conditions set forth in Section 1 of this Attachment, Verizon shall allow CBB to access Loops unbundled from local switching and local transport, in accordance with this Section 3 and the rates and charges provided in the Pricing Attachment. Verizon shall allow CBB access to Loops in accordance with, but only to extent required by, Applicable Law. The available Loop types are as set forth below:

  • Transmission Credits No later than thirty (30) days prior to the Commercial Operation Date, the Interconnection Customer may make a one-time election by written notice to the CAISO and the Participating TO to receive Congestion Revenue Rights as defined in and as available under the CAISO Tariff at the time of the election in accordance with the CAISO Tariff, in lieu of a refund of the cost of Network Upgrades in accordance with Article 11.4.1.

  • Data Transmission The procedures for transmitting load obligation data to PJM for DS Supplier’s DS Load shall be as set forth by PJM.

  • No Transmission Service The execution of this LGIA does not constitute a request for, nor the provision of, any transmission service under the CAISO Tariff, and does not convey any right to deliver electricity to any specific customer or point of delivery.

  • Transmission Charge The cost for transporting electricity from the generation source to your electric distribution company. For most electric customers who select a new supplier, transmission costs will be included in the charges from your new supplier. The Federal Energy Regulatory Commission regulates retail transmission prices and services. This charge will vary with your source of supply.

  • No Transmission Delivery Service The execution of this Agreement does not constitute a request for, nor agreement to provide, any Transmission Service under the NYISO OATT, and does not convey any right to deliver electricity to any specific customer or Point of Delivery. If Developer wishes to obtain Transmission Service on the New York State Transmission System, then Developer must request such Transmission Service in accordance with the provisions of the NYISO OATT.

  • Transmission The Custodian and the Fund shall comply with SWIFT’s authentication procedures. The Custodian will act on FT Instructions received via SWIFT provided the instruction is authenticated by the SWIFT system. § Written Instructions. Instructions may be transmitted in an original writing that bears the manual signature of an Authorized Person(s).

  • Transmission Delivery Service Implications Network Resource Interconnection Service allows Interconnection Customer's Large Generating Facility to be designated by any Network Customer under the Tariff on Transmission Provider's Transmission System as a Network Resource, up to the Large Generating Facility's full output, on the same basis as existing Network Resources interconnected to Transmission Provider's Transmission System, and to be studied as a Network Resource on the assumption that such a designation will occur. Although Network Resource Interconnection Service does not convey a reservation of transmission service, any Network Customer under the Tariff can utilize its network service under the Tariff to obtain delivery of energy from the interconnected Interconnection Customer's Large Generating Facility in the same manner as it accesses Network Resources. A Large Generating Facility receiving Network Resource Interconnection Service may also be used to provide Ancillary Services after technical studies and/or periodic analyses are performed with respect to the Large Generating Facility's ability to provide any applicable Ancillary Services, provided that such studies and analyses have been or would be required in connection with the provision of such Ancillary Services by any existing Network Resource. However, if an Interconnection Customer's Large Generating Facility has not been designated as a Network Resource by any load, it cannot be required to provide Ancillary Services except to the extent such requirements extend to all generating facilities that are similarly situated. The provision of Network Integration Transmission Service or firm Point-to-Point Transmission Service may require additional studies and the construction of additional upgrades. Because such studies and upgrades would be associated with a request for delivery service under the Tariff, cost responsibility for the studies and upgrades would be in accordance with FERC's policy for pricing transmission delivery services. Network Resource Interconnection Service does not necessarily provide Interconnection Customer with the capability to physically deliver the output of its Large Generating Facility to any particular load on Transmission Provider's Transmission System without incurring congestion costs. In the event of transmission constraints on Transmission Provider's Transmission System, Interconnection Customer's Large Generating Facility shall be subject to the applicable congestion management procedures in Transmission Provider's Transmission System in the same manner as Network Resources. There is no requirement either at the time of study or interconnection, or at any point in the future, that Interconnection Customer's Large Generating Facility be designated as a Network Resource by a Network Service Customer under the Tariff or that Interconnection Customer identify a specific buyer (or sink). To the extent a Network Customer does designate the Large Generating Facility as a Network Resource, it must do so pursuant to Transmission Provider's Tariff. Once an Interconnection Customer satisfies the requirements for obtaining Network Resource Interconnection Service, any future transmission service request for delivery from the Large Generating Facility within Transmission Provider's Transmission System of any amount of capacity and/or energy, up to the amount initially studied, will not require that any additional studies be performed or that any further upgrades associated with such Large Generating Facility be undertaken, regardless of whether or not such Large Generating Facility is ever designated by a Network Customer as a Network Resource and regardless of changes in ownership of the Large Generating Facility. However, the reduction or elimination of congestion or redispatch costs may require additional studies and the construction of additional upgrades. To the extent Interconnection Customer enters into an arrangement for long term transmission service for deliveries from the Large Generating Facility outside Transmission Provider's Transmission System, such request may require additional studies and upgrades in order for Transmission Provider to grant such request.

  • Data Transmission Control Except as necessary for the provision of the Cloud Services in accordance with the Agreement, Personal Data must not be read, copied, modified or removed without authorization during transfer. Where data carriers are physically transported, adequate measures are implemented at SAP to provide the agreed-upon service levels (for example, encryption and lead-lined containers). Measures: • Personal Data in transfer over SAP internal networks is protected according to SAP Security Policy. • When data is transferred between SAP and its customers, the protection measures for the transferred Personal Data are mutually agreed upon and made part of the relevant agreement. This applies to both physical and network based data transfer. In any case, the Customer assumes responsibility for any data transfer once it is outside of SAP-controlled systems (e.g. data being transmitted outside the firewall of the SAP Data Center).

  • Transmission of Data Customer understands that the technical processing and transmission of Customer’s Electronic Communications is fundamentally necessary to use of the Cloud Service. Customer is responsible for securing DSL, cable or another high speed Internet connection and up-to-date “browser” software in order to utilize the Cloud Service. Customer expressly consents to Oracle’s interception and storage of Electronic Communications and/or Customer Data as needed to provide the Services hereunder, and Customer acknowledges and understands that Customer’s Electronic Communications will involve transmission over the Internet, and over various networks, only part of which may be owned and/or operated by Oracle. Customer further acknowledges and understands that Electronic Communications may be accessed by unauthorized parties when communicated across the Internet, network communications facilities, telephone or other electronic means. Without limiting Oracle’s applicable obligations under the Security or Confidentiality Sections of this Agreement, Oracle is not responsible for any Electronic Communications and/or Customer Data which are delayed, lost, altered, intercepted or stored during the transmission of any data whatsoever across networks not owned and/or operated by Oracle, including, but not limited to, the Internet and Customer’s local network.

Time is Money Join Law Insider Premium to draft better contracts faster.