Transducer Clause Samples
A Transducer clause defines the responsibilities and requirements related to the use, maintenance, or provision of transducers within a contract. Typically, this clause specifies the technical standards the transducers must meet, outlines who is responsible for their installation and calibration, and may address issues such as ownership, replacement, or liability for malfunction. By clearly allocating duties and expectations regarding transducers, this clause helps prevent disputes over equipment performance and ensures that both parties understand their obligations.
Transducer. The first device in a data channel used to convert a physical quantity to be measured into a second quantity (such as an electrical voltage) which can be processed by the remainder of the channel.
Transducer. The contractor shall provide and install one Teledyne ▇▇▇▇ Hydrographic dual frequency transducer (Model THP200/24-4/20) in the transducer well described in C470. The contractor shall provide and install a Hummingbird type survey unit, similar to the HELIX CHIRP 7. The face of the Hummingbird transducer shall be mounted on the horizontal plane to point directly downward. The display shall be mounted on the survey desk and the transducer shall be in a through-hull well, attached via resin in an appropriate hull location near the keel of the vessel. The location shall be aft of the ▇▇▇▇ transducer well. The mounting system shall be similar to the Furuno transducer.