Telemetered Quantities Sample Clauses

Telemetered Quantities. Georgia Power shall provide the data protocol, and Generator shall install as part of the Interconnection Facilities any equipment necessary to deliver telemetered signals to Georgia Power specifying the voltage and watts, vars, and watthours delivered to the Georgia Power Electric System at the Interconnection Point. VOLTAGE SCHEDULES AT THE INTERCONNECTION POINT SOUTHERN POWER COMPANY Commencing with the Effective Date of the Interconnection Agreement, Generator shall maintain the following voltage schedules as communicated by Georgia Power from time to time: Schedule #1 - Southern Company Control Area Maximum Load for the Day greater than 33,000 MW Operating Time Voltage -------------- -------- 0000-0700 236 kV 0700-2100 238 kV 2100-2400 236 kV Schedule #2 - Southern Company Control Area Maximum Load for the Day between 28,000 and 33,000 MW Operating Time Voltage -------------- -------- 0000-0700 235 kV 0700-2000 238 kV 2000-2400 236 kV Schedule #3 - Southern Company Control Area Maximum Load for the Day between 23,000 and 28,000MW Operating Time Voltage -------------- -------- 0000-0800 235 kV 0800-1900 236 kV 1900-2400 236 kV Schedule #4 - Southern Company Control Area Maximum load for the Day below 23,000 MW Operating Time Voltage -------------- -------- 0000-0600 234 kV 0600-2100 236 kV 2100-2400 234 kV The Georgia ITS system operator's determination of whether Schedule 1, 2, 3, or 4 should be used for a given period shall be based on expectations of system requirements and conditions. The voltage schedule to be used, for the upcoming week, shall be communicated to Generator each Friday and at such other times as changing system requirements and conditions may require. APPENDIX B SPECIFICATIONS TO INTERCONNECTION AGREEMENT BETWEEN SOUTHERN POWER COMPANY AND GEORGIA POWER COMPANY
Sample 1See All (4)
AutoNDA by SimpleDocs
Telemetered Quantities. Alabama Power shall provide the data protocol, and Generator shall install as part of the Interconnection Facilities any equipment necessary to deliver telemetered signals to Alabama Power specifying the voltage and watts, vars, and watthours delivered to the Alabama Power Electric System at the Interconnection Point. VOLTAGE SCHEDULES AT THE INTERCONNECTION POINT FOR SOUTHERN POWER AUTAUGAVILLE COMBINED CYCLE UNIT 2 Commencing with the effective date of the Interconnection Agreement, Generator shall maintain the following voltage schedules as communicated by Alabama Power from time to time: ----------------------------------------------------------------------------- Voltage scheduling Evaluation for Autaugaville CC2 (500 kV) ----------------------------------------------------------------------------- Schedule #1 - Southern Control Area Maximum Load for the day Greater Than 33,000MW ----------------------------------------------------------------------------- Operating Time Autaugaville CC2 500 kV ----------------------------------------------------------------------------- 0000 - 0700 520 0700 - 2100 524 2100 - 2400 520 Schedule #2 - Southern Control Area Maximum Load for the day Between 28,000 and 33,000MW Operating Time Autaugaville CC2 500 kV 0000 - 0700 517 0700 - 2100 524 2100 - 2400 520 Schedule #3 - Southern Control Area Maximum Load for the day Between 23,000 and 28,000MW Operating Time Autaugaville CC2 500 kV 0000 - 0800 517 0800 - 2100 522 2100 - 2400 520 Schedule #4 - Southern Control Area Maximum Load for the day Below 23,000MW Operating Time Autaugaville CC2 500 kV 0000 - 0600 515 0600 - 2100 520 2100 - 2400 515 Alabama Power's determination of whether Schedule 1, 2, 3, or 4 should be used for a given period shall be based on expectations of system requirements and conditions. The voltage schedule to be used, for the upcoming week, shall be communicated to Generator each Friday and at such other times as changing system requirements and conditions may require. SPECIFICATIONS TO INTERCONNECTION AGREEMENT BETWEEN SOUTHERN POWER (AUTAUGAVILLE CC UNIT 2) AND ALABAMA POWER COMPANY
Sample 1
Telemetered Quantities. Georgia Power shall provide the data protocol, and Tenaska shall install as part of the Interconnection Facilities any equipment necessary to deliver telemetered signals to Georgia Power specifying the voltage and watts, vars, and watthours delivered to the Georgia Power Electric System at the Interconnection Point. Appendix A APPENDIX B SPECIFICATIONS TO INTERCONNECTION AGREEMENT BETWEEN TENASKA AND GEORGIA POWER COMPANY
Sample 1

Related to Telemetered Quantities

  • Delivery Point Once Manufacture of the Products has been completed, Contractor shall be responsible for delivering the Finished Goods FCA, (as defined in Incoterms (2000) published by the International Chamber of Commerce) and to a freight forwarder specified by Company in its Order, or otherwise approved by Company. “Delivery Point” as used in this Agreement shall mean the specific time and location that the Product is delivered to the shipper specified on the Order.

  • Delivery Points The measurement of and tests for quality of Shipper's Gas redelivered at the Delivery Points shall be governed by and determined in accordance with the requirements of the receiving pipeline at each Delivery Point.

  • Quantities 2.1 The BUYER shall make the agreed prepayment according to the payment schedule set forth in Appendix A. XXXXXX shall sell and deliver to BUYER and BUYER will purchase and take from WACKER the annual quantities of PRODUCT set forth in Appendix A.

  • Quality Specifications SANMINA-SCI shall comply with the quality specifications set forth in its Quality Manual, incorporated by reference herein, a copy of which is available from SANMINA-SCI upon request.

  • Manufacturing Services Jabil will manufacture the Product in accordance with the Specifications and any applicable Build Schedules. Jabil will reply to each proposed Build Schedule that is submitted in accordance with the terms of this Agreement by notifying Company of its acceptance or rejection within three (3) business days of receipt of any proposed Build Schedule. In the event of Jabil’s rejection of a proposed Build Schedule, Jabil’s notice of rejection will specify the basis for such rejection. When requested by Company, and subject to appropriate fee and cost adjustments, Jabil will provide Additional Services for existing or future Product manufactured by Jabil. Company shall be solely responsible for the sufficiency and adequacy of the Specifications [***].

  • Technical Specifications Each Bloom System is an integrated system comprised of a fuel cell stack assembly and associated balance of plant components that converts a fuel into electricity using electrochemical means that (i) has a Nameplate Capacity of at least 0.5 kilowatts of electricity using an electrochemical process and (ii) has an electricity-only generation efficiency greater than thirty percent (30%).

  • Quantity Seller shall exclusively make available to Buyer and Buyer agrees to purchase from Seller, during the term of this Agreement a quantity equal to 100% of the current and future production into the Points of Delivery. Except as otherwise provided in this Section, Seller shall deliver all gas it develops and produces into the Points of Delivery. Unless agreed to by Buyer Seller shall not sell any gas to any other party. It is currently estimated that Atlas Energy Group, Inc. and Atlas Resources, Inc. will collectively deliver approximately 27,000 Mcf per day and Resource Energy. Inc. will deliver approximately 7,000 Mcf per day at the Points of Delivery. Buyer and Seller agree to mutually cooperate and regularly meet to establish production schedules of gas into the Points of Delivery. Seller shall nominate, by the 25th calendar day of the preceding month, the daily volumes to be delivered during the following month to the Points of Delivery. Seller's daily deliveries shall be no greater than one hundred and ten percent (110%) or no less than ninety percent (90%) of Seller's daily nominated volume as long as Seller's deliveries at each Point of Delivery are at least 500 Mcf per day, with the exception of the Wheatland Dehydration Meter, for which the minimum volume is 300 Mcf per day. If Seller's daily volume delivery is less than ninety percent (90%) of Seller's daily nominated volume, then Seller's shall pay Buyer one hundred and two percent (102%) of the Buyer's replacement cost, less the price set forth on Schedule I, for the volume of gas which is the difference between Seller's daily volume delivery and ninety percent (90%) of Seller's daily nominated volume. If Seller's daily volume delivery is more than one hundred and ten percent (110%) of Seller's daily nominated volume, then, regardless of other pricing provisions contained in this Agreement, Buyer shall pay Seller ninety eight percent (98%) of the daily market price of each Point of Delivery, as set forth on Schedule I, for the volume of gas which is the difference between Seller's daily volume delivery and one hundred and ten percent (110%) of Seller's daily nominated volume. Notwithstanding the first paragraph of this Section 4, it is understood and agreed to by the parties that Seller shall continue to supply gas to its three (3) direct delivery customers, Wheatland Tube Company, CSC Industries and Xxxxxx Consolidated for the life of those agreements, including any extensions or renewals. Buyer and Seller agree that Buyer will provide all billing services for the above three (3) customers. Buyer agrees that it will not utilize Seller's local production, or any other source of supply, as source of sales to the above three (3) customers of Seller to the extent Buyer's offer would supplant or in any manner displace the existing amount of Seller's direct delivery agreements throughout the term of Seller's agreements with the above three (3) customers, including any extensions or renewals. Seller currently delivers 2,600 Mcf per day to the Wheatland Tube Company, 3,400 Mcf per day to CSC Industries and 325 Mcf per day to Xxxxxx Consolidated. Seller agrees that Buyer may sell any amount, in excess of Seller's current volumes (so long as Seller continues to have a contact with the above three (3) customers) to such customers. Buyer shall not be restricted in selling to any of the above three (3) customers if Seller no longer has a contract with such customer. Seller's commitment to deliver all of the gas it produces to Buyer is subject to the right of investors, including limited partnerships where Seller is acting as the General Partner, in xxxxx operated by Seller, to take their gas in kind. In the event a party wishes to take its gas in kind, Seller shall promptly notify Buyer. Seller further agrees to indemnify Buyer for full losses attributable to gas which has been taken in kind by investors in xxxxx operated by Seller, to the extent Buyer has incurred a loss on such gas because of a prior commitment by Buyer.

  • Engineering Services The Borrower’s Engineer will provide engineering services covering planning and design, operation of the System, and the supervision and inspection of the construction of the Project. The Borrower’s Engineer will provide to the Department the certificate required by Section 3.4.

  • Production Royalty The amount of the Royalty shall be determined at the end of each month after the Effective Date. The Royalty shall be determined monthly on the basis such that payments will be determined as of and paid within thirty (30) days after the last day of each month during which Lessee produces any Geothermal Resources. The Royalty rates shall be determined as follows:

  • Cost of Metering The Issuer shall not be obligated to pay any costs associated with the routine metering duties set forth in this Section 2, including the costs of installing, replacing and maintaining meters, nor shall the Issuer be entitled to any credit against the Servicing Fee for any cost savings realized by the Servicer as a result of new metering and/or billing technologies.

Time is Money Join Law Insider Premium to draft better contracts faster.