Technical Requirements. 6.2.6.1 The entire designated transmission service (e.g., DS0, DS1, DS3) shall be dedicated to AmTel designated traffic. 6.2.6.2 For DS1 or DS3 circuits, Dedicated Transport shall at a minimum meet the performance, availability, jitter, and delay requirements specified for Customer Interface to Central Office (CI to CO) connections in the applicable industry standards. 6.2.6.3 BellSouth shall offer the following interface transmission rates for Dedicated Transport: 6.2.6.3.1 DS0 Equivalent; 6.2.6.3.2 DS1; 6.2.6.3.3 DS3; and 6.2.6.3.4 SDH (Synchronous Digital Hierarchy) Standard interface rates are in accordance with International Telecommunications Union (ITU) Recommendation G.707 and Plesiochronous Digital Hierarchy (PDH) rates per ITU Recommendation G.704. 6.2.6.4 BellSouth shall design Dedicated Transport according to its network infrastructure. AmTel shall specify the termination points for Dedicated Transport. 6.2.6.5 At a minimum, Dedicated Transport shall meet each of the requirements set forth in the applicable industry technical references.
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 6.2.6.1 The entire designated transmission service (e.g., DS0, DS1, DS3) shall be dedicated to AmTel Sail Networks designated traffic.
6.2.6.2 For DS1 or DS3 circuits, Dedicated Transport shall at a minimum meet the performance, availability, jitter, and delay requirements specified for Customer Interface to Central Office (CI to CO) connections in the applicable industry standards.
6.2.6.3 BellSouth shall offer the following interface transmission rates for Dedicated Transport:
6.2.6.3.1 DS0 Equivalent;
6.2.6.3.2 DS1;
6.2.6.3.3 DS3; and
6.2.6.3.4 SDH (Synchronous Digital Hierarchy) Standard interface rates are in accordance with International Telecommunications Union (ITU) Recommendation G.707 and Plesiochronous Digital Hierarchy (PDH) rates per ITU Recommendation G.704.
6.2.6.4 BellSouth shall design Dedicated Transport according to its network infrastructure. AmTel Sail Networks shall specify the termination points for Dedicated Transport.
6.2.6.5 At a minimum, Dedicated Transport shall meet each of the requirements set forth in the applicable industry technical references.
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 6.2.6.1 The entire designated transmission service (e.g., DS0, DS1, DS3) shall be dedicated to AmTel Starlink designated traffic.
6.2.6.2 For DS1 or DS3 circuits, Dedicated Transport shall at a minimum meet the performance, availability, jitter, and delay requirements specified for Customer Interface to Central Office (CI to CO) connections in the applicable industry standards.
6.2.6.3 BellSouth shall offer the following interface transmission rates for Dedicated Transport:
6.2.6.3.1 DS0 Equivalent;
6.2.6.3.2 DS1;
6.2.6.3.3 DS3; and
6.2.6.3.4 SDH (Synchronous Digital Hierarchy) Standard interface rates are in accordance with International Telecommunications Union (ITU) Recommendation G.707 and Plesiochronous Digital Hierarchy (PDH) rates per ITU Recommendation G.704.
6.2.6.4 BellSouth shall design Dedicated Transport according to its network infrastructure. AmTel Starlink shall specify the termination points for Dedicated Transport.
6.2.6.5 At a minimum, Dedicated Transport shall meet each of the requirements set forth in the applicable industry technical references.
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 6.2.6.1 The entire designated transmission service (e.g., DS0, DS1, DS3) shall be dedicated to AmTel TeleConex designated traffic.
6.2.6.2 For DS1 or DS3 circuits, Dedicated Transport shall at a minimum meet the performance, availability, jitter, and delay requirements specified for Customer Interface to Central Office (CI to CO) connections in the applicable industry standards.
6.2.6.3 BellSouth shall offer the following interface transmission rates for Dedicated Transport:
6.2.6.3.1 DS0 Equivalent;
6.2.6.3.2 DS1;
6.2.6.3.3 DS3; and
6.2.6.3.4 SDH (Synchronous Digital Hierarchy) Standard interface rates are in accordance with International Telecommunications Union (ITU) Recommendation G.707 and Plesiochronous Digital Hierarchy (PDH) rates per ITU Recommendation G.704.
6.2.6.4 BellSouth shall design Dedicated Transport according to its network infrastructure. AmTel TeleConex shall specify the termination points for Dedicated Transport.
6.2.6.5 At a minimum, Dedicated Transport shall meet each of the requirements set forth in the applicable industry technical references.
Appears in 1 contract
Sources: Clec Agreement
Technical Requirements. 6.2.6.1 The entire designated transmission service (e.g., DS0, DS1, DS3) shall be dedicated to AmTel EZ Phone designated traffic.
6.2.6.2 For DS1 or DS3 circuits, Dedicated Transport shall at a minimum meet the performance, availability, jitter, and delay requirements specified for Customer Interface to Central Office (CI to CO) connections in the applicable industry standards.
6.2.6.3 BellSouth shall offer the following interface transmission rates for Dedicated Transport:
6.2.6.3.1 DS0 Equivalent;
6.2.6.3.2 DS1;
6.2.6.3.3 DS3; and
6.2.6.3.4 SDH (Synchronous Digital Hierarchy) Standard interface rates are in accordance with International Telecommunications Union (ITU) Recommendation G.707 and Plesiochronous Digital Hierarchy (PDH) rates per ITU Recommendation G.704.
6.2.6.4 BellSouth shall design Dedicated Transport according to its network infrastructure. AmTel EZ Phone shall specify the termination points for Dedicated Transport.
6.2.6.5 At a minimum, Dedicated Transport shall meet each of the requirements set forth in the applicable industry technical references.
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 6.2.6.1 The entire designated transmission service (e.g., DS0, DS1, DS3) shall be dedicated to AmTel Victory designated traffic.
6.2.6.2 For DS1 or DS3 circuits, Dedicated Transport shall at a minimum meet the performance, availability, jitter, and delay requirements specified for Customer Interface to Central Office (CI to CO) connections in the applicable industry standards.
6.2.6.3 BellSouth shall offer the following interface transmission rates for Dedicated Transport:
6.2.6.3.1 DS0 Equivalent;
6.2.6.3.2 DS1;
6.2.6.3.3 DS3; and
6.2.6.3.4 SDH (Synchronous Digital Hierarchy) Standard interface rates are in accordance with International Telecommunications Union (ITU) Recommendation G.707 and Plesiochronous Digital Hierarchy (PDH) rates per ITU Recommendation G.704.
6.2.6.4 BellSouth shall design Dedicated Transport according to its network infrastructure. AmTel Victory shall specify the termination points for Dedicated Transport.
6.2.6.5 At a minimum, Dedicated Transport shall meet each of the requirements set forth in the applicable industry technical references.
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 6.2.6.1 The entire designated transmission service (e.g., DS0, DS1, DS3) shall be dedicated to AmTel PLI designated traffic.
6.2.6.2 For DS1 or DS3 circuits, Dedicated Transport shall at a minimum meet the performance, availability, jitter, and delay requirements specified for Customer Interface to Central Office (CI to CO) connections in the applicable industry standards.
6.2.6.3 BellSouth shall offer the following interface transmission rates for Dedicated Transport:
6.2.6.3.1 DS0 Equivalent;
6.2.6.3.2 DS1;
6.2.6.3.3 DS3; and
6.2.6.3.4 SDH (Synchronous Digital Hierarchy) Standard interface rates are in accordance with International Telecommunications Union (ITU) Recommendation G.707 and Plesiochronous Digital Hierarchy (PDH) rates per ITU Recommendation G.704.
6.2.6.4 BellSouth shall design Dedicated Transport according to its network infrastructure. AmTel PLI shall specify the termination points for Dedicated Transport.
6.2.6.5 At a minimum, Dedicated Transport shall meet each of the requirements set forth in the applicable industry technical references.
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 6.2.6.1 The entire designated transmission service (e.g., DS0, DS1, DS3) shall be dedicated to AmTel Hotline designated traffic.
6.2.6.2 For DS1 or DS3 circuits, Dedicated Transport shall at a minimum meet the performance, availability, jitter, and delay requirements specified for Customer Interface to Central Office (CI to CO) connections in the applicable industry standards.
6.2.6.3 BellSouth shall offer the following interface transmission rates for Dedicated Transport:
6.2.6.3.1 DS0 Equivalent;
6.2.6.3.2 DS1;
6.2.6.3.3 DS3; and
6.2.6.3.4 SDH (Synchronous Digital Hierarchy) Standard interface rates are in accordance with International Telecommunications Union (ITU) Recommendation G.707 and Plesiochronous Digital Hierarchy (PDH) rates per ITU Recommendation G.704.
6.2.6.4 BellSouth shall design Dedicated Transport according to its network infrastructure. AmTel Hotline shall specify the termination points for Dedicated Transport.
6.2.6.5 At a minimum, Dedicated Transport shall meet each of the requirements set forth in the applicable industry technical references.
Appears in 1 contract
Sources: Clec Agreement
Technical Requirements. 6.2.6.1 The entire designated transmission service (e.g., DS0, DS1, DS3) shall be dedicated to AmTel Lightning Communications designated traffic.
6.2.6.2 For DS1 or DS3 circuits, Dedicated Transport shall at a minimum meet the performance, availability, jitter, and delay requirements specified for Customer Interface to Central Office (CI to CO) connections in the applicable industry standards.
6.2.6.3 BellSouth shall offer the following interface transmission rates for Dedicated Transport:
6.2.6.3.1 DS0 Equivalent;
6.2.6.3.2 DS1;
6.2.6.3.3 DS3; and
6.2.6.3.4 SDH (Synchronous Digital Hierarchy) Standard interface rates are in accordance with International Telecommunications Union (ITU) Recommendation G.707 and Plesiochronous Digital Hierarchy (PDH) rates per ITU Recommendation G.704.
6.2.6.4 BellSouth shall design Dedicated Transport according to its network infrastructure. AmTel Lightning Communications shall specify the termination points for Dedicated Transport.
6.2.6.5 At a minimum, Dedicated Transport shall meet each of the requirements set forth in the applicable industry technical references.
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 6.2.6.1 The entire designated transmission service (e.g., DS0, DS1, DS3) shall be dedicated to AmTel WorldxChange designated traffic.
6.2.6.2 For DS1 or DS3 circuits, Dedicated Transport shall at a minimum meet the performance, availability, jitter, and delay requirements specified for Customer Interface to Central Office (CI to CO) connections in the applicable industry standards.
6.2.6.3 BellSouth shall offer the following interface transmission rates for Dedicated Transport:
6.2.6.3.1 DS0 Equivalent;
6.2.6.3.2 DS1;
6.2.6.3.3 DS3; and
6.2.6.3.4 SDH (Synchronous Digital Hierarchy) Standard interface rates are in accordance with International Telecommunications Union (ITU) Recommendation G.707 and Plesiochronous Digital Hierarchy (PDH) rates per ITU Recommendation G.704.
6.2.6.4 BellSouth shall design Dedicated Transport according to its network infrastructure. AmTel WorldxChange shall specify the termination points for Dedicated Transport.
6.2.6.5 At a minimum, Dedicated Transport shall meet each of the requirements set forth in the applicable industry technical references.
Appears in 1 contract
Sources: Clec Agreement
Technical Requirements. 6.2.6.1 The entire designated transmission service (e.g., DS0, DS1, DS3) shall be dedicated to AmTel CCI designated traffic.
6.2.6.2 For DS1 or DS3 circuits, Dedicated Transport shall at a minimum meet the performance, availability, jitter, and delay requirements specified for Customer Interface to Central Office (CI to CO) connections in the applicable industry standards.
6.2.6.3 BellSouth shall offer the following interface transmission rates for Dedicated Transport:
6.2.6.3.1 DS0 Equivalent;
6.2.6.3.2 DS1;
6.2.6.3.3 DS3; and
6.2.6.3.4 SDH (Synchronous Digital Hierarchy) Standard interface rates are in accordance with International Telecommunications Union (ITU) Recommendation G.707 and Plesiochronous Digital Hierarchy (PDH) rates per ITU Recommendation G.704.
6.2.6.4 BellSouth shall design Dedicated Transport according to its network infrastructure. AmTel CCI shall specify the termination points for Dedicated Transport.
6.2.6.5 At a minimum, Dedicated Transport shall meet each of the requirements set forth in the applicable industry technical references.
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 6.2.6.1 The entire designated transmission service (e.g., DS0, DS1, DS3) shall be dedicated to AmTel NOW designated traffic.
6.2.6.2 For DS1 or DS3 circuits, Dedicated Transport shall at a minimum meet the performance, availability, jitter, and delay requirements specified for Customer Interface to Central Office (CI to CO) connections in the applicable industry standards.
6.2.6.3 BellSouth shall offer the following interface transmission rates for Dedicated Transport:
6.2.6.3.1 DS0 Equivalent;
6.2.6.3.2 DS1;
6.2.6.3.3 DS3; and
6.2.6.3.4 SDH (Synchronous Digital Hierarchy) Standard interface rates are in accordance with International Telecommunications Union (ITU) Recommendation G.707 and Plesiochronous Digital Hierarchy (PDH) rates per ITU Recommendation G.704.
6.2.6.4 BellSouth shall design Dedicated Transport according to its network infrastructure. AmTel NOW shall specify the termination points for Dedicated Transport.
6.2.6.5 At a minimum, Dedicated Transport shall meet each of the requirements set forth in the applicable industry technical references.
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 6.2.6.1 The entire designated transmission service (e.g., DS0, DS1, DS3) shall be dedicated to AmTel BAK designated traffic.
6.2.6.2 For DS1 or DS3 circuits, Dedicated Transport shall at a minimum meet the performance, availability, jitter, and delay requirements specified for Customer Interface to Central Office (CI to CO) connections in the applicable industry standards.
6.2.6.3 BellSouth shall offer the following interface transmission rates for Dedicated Transport:
6.2.6.3.1 DS0 Equivalent;
6.2.6.3.2 DS1;
6.2.6.3.3 DS3; and
6.2.6.3.4 SDH (Synchronous Digital Hierarchy) Standard interface rates are in accordance with International Telecommunications Union (ITU) Recommendation G.707 and Plesiochronous Digital Hierarchy (PDH) rates per ITU Recommendation G.704.
6.2.6.4 BellSouth shall design Dedicated Transport according to its network infrastructure. AmTel BAK shall specify the termination points for Dedicated Transport.
6.2.6.5 At a minimum, Dedicated Transport shall meet each of the requirements set forth in the applicable industry technical references.
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 6.2.6.1 The entire designated transmission service (e.g., DS0, DS1, DS3) shall be dedicated to AmTel Southern Light designated traffic.
6.2.6.2 For DS1 or DS3 circuits, Dedicated Transport shall at a minimum meet the performance, availability, jitter, and delay requirements specified for Customer Interface to Central Office (CI to CO) connections in the applicable industry standards.
6.2.6.3 BellSouth shall offer the following interface transmission rates for Dedicated Transport:
6.2.6.3.1 DS0 Equivalent;
6.2.6.3.2 DS1;
6.2.6.3.3 DS3; and
6.2.6.3.4 SDH (Synchronous Digital Hierarchy) Standard interface rates are in accordance with International Telecommunications Union (ITU) Recommendation G.707 and Plesiochronous Digital Hierarchy (PDH) rates per ITU Recommendation G.704.
6.2.6.4 BellSouth shall design Dedicated Transport according to its network infrastructure. AmTel Southern Light shall specify the termination points for Dedicated Transport.
6.2.6.5 At a minimum, Dedicated Transport shall meet each of the requirements set forth in the applicable industry technical references.
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 6.2.6.1 The entire designated transmission service (e.g., DS0, DS1, DS3) shall be dedicated to AmTel FeroNetworks designated traffic.
6.2.6.2 For DS1 or DS3 circuits, Dedicated Transport shall at a minimum meet the performance, availability, jitter, and delay requirements specified for Customer Interface to Central Office (CI to CO) connections in the applicable industry standards.
6.2.6.3 BellSouth shall offer the following interface transmission rates for Dedicated Transport:
6.2.6.3.1 DS0 Equivalent;
6.2.6.3.2 DS1;
6.2.6.3.3 DS3; and
6.2.6.3.4 SDH (Synchronous Digital Hierarchy) Standard interface rates are in accordance with International Telecommunications Union (ITU) Recommendation G.707 and Plesiochronous Digital Hierarchy (PDH) rates per ITU Recommendation G.704.
6.2.6.4 BellSouth shall design Dedicated Transport according to its network infrastructure. AmTel FeroNetworks shall specify the termination points for Dedicated Transport.
6.2.6.5 At a minimum, Dedicated Transport shall meet each of the requirements set forth in the applicable industry technical references.
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 6.2.6.1 The entire designated transmission service (e.g., DS0, DS1, DS3) shall be dedicated to AmTel Utility USA designated traffic.
6.2.6.2 For DS1 or DS3 circuits, Dedicated Transport shall at a minimum meet the performance, availability, jitter, and delay requirements specified for Customer Interface to Central Office (CI to CO) connections in the applicable industry standards.
6.2.6.3 BellSouth shall offer the following interface transmission rates for Dedicated Transport:
6.2.6.3.1 DS0 Equivalent;
6.2.6.3.2 DS1;
6.2.6.3.3 DS3; and
6.2.6.3.4 SDH (Synchronous Digital Hierarchy) Standard interface rates are in accordance with International Telecommunications Union (ITU) Recommendation G.707 and Plesiochronous Digital Hierarchy (PDH) rates per ITU Recommendation G.704.
6.2.6.4 BellSouth shall design Dedicated Transport according to its network infrastructure. AmTel Utility USA shall specify the termination points for Dedicated Transport.
6.2.6.5 At a minimum, Dedicated Transport shall meet each of the requirements set forth in the applicable industry technical references.
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 6.2.6.1 The entire designated transmission service (e.g., DS0, DS1, DS3) shall be dedicated to AmTel Excel designated traffic.
6.2.6.2 For DS1 or DS3 circuits, Dedicated Transport shall at a minimum meet the performance, availability, jitter, and delay requirements specified for Customer Interface to Central Office (CI to CO) connections in the applicable industry standards.
6.2.6.3 BellSouth shall offer the following interface transmission rates for Dedicated Transport:
6.2.6.3.1 DS0 Equivalent;
6.2.6.3.2 DS1;
6.2.6.3.3 DS3; and
6.2.6.3.4 SDH (Synchronous Digital Hierarchy) Standard interface rates are in accordance with International Telecommunications Union (ITU) Recommendation G.707 and Plesiochronous Digital Hierarchy (PDH) rates per ITU Recommendation G.704.
6.2.6.4 BellSouth shall design Dedicated Transport according to its network infrastructure. AmTel Excel shall specify the termination points for Dedicated Transport.
6.2.6.5 At a minimum, Dedicated Transport shall meet each of the requirements set forth in the applicable industry technical references.
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 6.2.6.1 The entire designated transmission service (e.g., DS0, DS1, DS3) shall be dedicated to AmTel Telson designated traffic.
6.2.6.2 For DS1 or DS3 circuits, Dedicated Transport shall at a minimum meet the performance, availability, jitter, and delay requirements specified for Customer Interface to Central Office (CI to CO) connections in the applicable industry standards.
6.2.6.3 BellSouth shall offer the following interface transmission rates for Dedicated Transport:
6.2.6.3.1 DS0 Equivalent;
6.2.6.3.2 DS1;
6.2.6.3.3 DS3; and
6.2.6.3.4 SDH (Synchronous Digital Hierarchy) Standard interface rates are in accordance with International Telecommunications Union (ITU) Recommendation G.707 and Plesiochronous Digital Hierarchy (PDH) rates per ITU Recommendation G.704.
6.2.6.4 BellSouth shall design Dedicated Transport according to its network infrastructure. AmTel Telson shall specify the termination points for Dedicated Transport.
6.2.6.5 At a minimum, Dedicated Transport shall meet each of the requirements set forth in the applicable industry technical references.
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 6.2.6.1 The entire designated transmission service (e.g., DS0, DS1, DS3) shall be dedicated to AmTel ABC Telcom designated traffic.
6.2.6.2 For DS1 or DS3 circuits, Dedicated Transport shall at a minimum meet the performance, availability, jitter, and delay requirements specified for Customer Interface to Central Office (CI to CO) connections in the applicable industry standards.
6.2.6.3 BellSouth shall offer the following interface transmission rates for Dedicated Transport:
6.2.6.3.1 DS0 Equivalent;
6.2.6.3.2 DS1;
6.2.6.3.3 DS3; and
6.2.6.3.4 SDH (Synchronous Digital Hierarchy) Standard interface rates are in accordance with International Telecommunications Union (ITU) Recommendation G.707 and Plesiochronous Digital Hierarchy (PDH) rates per ITU Recommendation G.704.
6.2.6.4 BellSouth shall design Dedicated Transport according to its network infrastructure. AmTel ABC Telcom shall specify the termination points for Dedicated Transport.
6.2.6.5 At a minimum, Dedicated Transport shall meet each of the requirements set forth in the applicable industry technical references.
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 6.2.6.1 The entire designated transmission service (e.g., DS0, DS1, DS3) shall be dedicated to AmTel ▇▇▇▇▇▇▇▇.▇▇▇ designated traffic.
6.2.6.2 For DS1 or DS3 circuits, Dedicated Transport shall at a minimum meet the performance, availability, jitter, and delay requirements specified for Customer Interface to Central Office (CI to CO) connections in the applicable industry standards.
6.2.6.3 BellSouth shall offer the following interface transmission rates for Dedicated Transport:
6.2.6.3.1 DS0 Equivalent;
6.2.6.3.2 DS1;
6.2.6.3.3 DS3; and
6.2.6.3.4 SDH (Synchronous Digital Hierarchy) Standard interface rates are in accordance with International Telecommunications Union (ITU) Recommendation G.707 and Plesiochronous Digital Hierarchy (PDH) rates per ITU Recommendation G.704.
6.2.6.4 BellSouth shall design Dedicated Transport according to its network infrastructure. AmTel ▇▇▇▇▇▇▇▇.▇▇▇ shall specify the termination points for Dedicated Transport.
6.2.6.5 At a minimum, Dedicated Transport shall meet each of the requirements set forth in the applicable industry technical references.
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 6.2.6.1 The entire designated transmission service (e.g., DS0, DS1, DS3) shall be dedicated to AmTel Clearwave Communications designated traffic.
6.2.6.2 For DS1 or DS3 circuits, Dedicated Transport shall at a minimum meet the performance, availability, jitter, and delay requirements specified for Customer Interface to Central Office (CI to CO) connections in the applicable industry standards.
6.2.6.3 BellSouth shall offer the following interface transmission rates for Dedicated Transport:
6.2.6.3.1 DS0 Equivalent;
6.2.6.3.2 DS1;
6.2.6.3.3 DS3; and
6.2.6.3.4 SDH (Synchronous Digital Hierarchy) Standard interface rates are in accordance with International Telecommunications Union (ITU) Recommendation G.707 and Plesiochronous Digital Hierarchy (PDH) rates per ITU Recommendation G.704.
6.2.6.4 BellSouth shall design Dedicated Transport according to its network infrastructure. AmTel Clearwave Communications shall specify the termination points for Dedicated Transport.
6.2.6.5 At a minimum, Dedicated Transport shall meet each of the requirements set forth in the applicable industry technical references.
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 6.2.6.1 The entire designated transmission service (e.g., DS0, DS1, DS3) shall be dedicated to AmTel Southern Telecom designated traffic.
6.2.6.2 For DS1 or DS3 circuits, Dedicated Transport shall at a minimum meet the performance, availability, jitter, and delay requirements specified for Customer Interface to Central Office (CI to CO) connections in the applicable industry standards.
6.2.6.3 BellSouth shall offer the following interface transmission rates for Dedicated Transport:
6.2.6.3.1 DS0 Equivalent;
6.2.6.3.2 DS1;
6.2.6.3.3 DS3; and
6.2.6.3.4 SDH (Synchronous Digital Hierarchy) Standard interface rates are in accordance with International Telecommunications Union (ITU) Recommendation G.707 and Plesiochronous Digital Hierarchy (PDH) rates per ITU Recommendation G.704.
6.2.6.4 BellSouth shall design Dedicated Transport according to its network infrastructure. AmTel Southern Telecom shall specify the termination points for Dedicated Transport.
6.2.6.5 At a minimum, Dedicated Transport shall meet each of the requirements set forth in the applicable industry technical references.
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 6.2.6.1 The entire designated transmission service (e.g., DS0, DS1, DS3) shall be dedicated to AmTel Triarch Marketing designated traffic.
6.2.6.2 For DS1 or DS3 circuits, Dedicated Transport shall at a minimum meet the performance, availability, jitter, and delay requirements specified for Customer Interface to Central Office (CI to CO) connections in the applicable industry standards.
6.2.6.3 BellSouth shall offer the following interface transmission rates for Dedicated Transport:
6.2.6.3.1 DS0 Equivalent;
6.2.6.3.2 DS1;
6.2.6.3.3 DS3; and
6.2.6.3.4 SDH (Synchronous Digital Hierarchy) Standard interface rates are in accordance with International Telecommunications Union (ITU) Recommendation G.707 and Plesiochronous Digital Hierarchy (PDH) rates per ITU Recommendation G.704.
6.2.6.4 BellSouth shall design Dedicated Transport according to its network infrastructure. AmTel Triarch Marketing shall specify the termination points for Dedicated Transport.
6.2.6.5 At a minimum, Dedicated Transport shall meet each of the requirements set forth in the applicable industry technical references.
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 6.2.6.1 The entire designated transmission service (e.g., DS0, DS1, DS3) shall be dedicated to AmTel ConnectNow! designated traffic.
6.2.6.2 For DS1 or DS3 circuits, Dedicated Transport shall at a minimum meet the performance, availability, jitter, and delay requirements specified for Customer Interface to Central Office (CI to CO) connections in the applicable industry standards.
6.2.6.3 BellSouth shall offer the following interface transmission rates for Dedicated Transport:
6.2.6.3.1 DS0 Equivalent;
6.2.6.3.2 DS1;
6.2.6.3.3 DS3; and
6.2.6.3.4 SDH (Synchronous Digital Hierarchy) Standard interface rates are in accordance with International Telecommunications Union (ITU) Recommendation G.707 and Plesiochronous Digital Hierarchy (PDH) rates per ITU Recommendation G.704.
6.2.6.4 BellSouth shall design Dedicated Transport according to its network infrastructure. AmTel ConnectNow! shall specify the termination points for Dedicated Transport.
6.2.6.5 At a minimum, Dedicated Transport shall meet each of the requirements set forth in the applicable industry technical references.
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 6.2.6.1 The entire designated transmission service (e.g., DS0, DS1, DS3) shall be dedicated to AmTel ACI designated traffic.
6.2.6.2 For DS1 or DS3 circuits, Dedicated Transport shall at a minimum meet the performance, availability, jitter, and delay requirements specified for Customer Interface to Central Office (CI to CO) connections in the applicable industry standards.
6.2.6.3 BellSouth shall offer the following interface transmission rates for Dedicated Transport:
6.2.6.3.1 DS0 Equivalent;
6.2.6.3.2 DS1;
6.2.6.3.3 DS3; and
6.2.6.3.4 SDH (Synchronous Digital Hierarchy) Standard interface rates are in accordance with International Telecommunications Union (ITU) Recommendation G.707 and Plesiochronous Digital Hierarchy (PDH) rates per ITU Recommendation G.704.
6.2.6.4 BellSouth shall design Dedicated Transport according to its network infrastructure. AmTel ACI shall specify the termination points for Dedicated Transport.
6.2.6.5 At a minimum, Dedicated Transport shall meet each of the requirements set forth in the applicable industry technical references.
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 6.2.6.1 The entire designated transmission service (e.g., DS0, DS1, DS3) shall be dedicated to AmTel Vertex designated traffic.
6.2.6.2 For DS1 or DS3 circuits, Dedicated Transport shall at a minimum meet the performance, availability, jitter, and delay requirements specified for Customer Interface to Central Office (CI to CO) connections in the applicable industry standards.
6.2.6.3 BellSouth shall offer the following interface transmission rates for Dedicated Transport:
6.2.6.3.1 DS0 Equivalent;
6.2.6.3.2 DS1;
6.2.6.3.3 DS3; and
6.2.6.3.4 SDH (Synchronous Digital Hierarchy) Standard interface rates are in accordance with International Telecommunications Union (ITU) Recommendation G.707 and Plesiochronous Digital Hierarchy (PDH) rates per ITU Recommendation G.704.
6.2.6.4 BellSouth shall design Dedicated Transport according to its network infrastructure. AmTel Vertex shall specify the termination points for Dedicated Transport.
6.2.6.5 At a minimum, Dedicated Transport shall meet each of the requirements set forth in the applicable industry technical references.
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 6.2.6.1 The entire designated transmission service (e.g., DS0, DS1, DS3) shall be dedicated to AmTel Budget Phone designated traffic.
6.2.6.2 For DS1 or DS3 circuits, Dedicated Transport shall at a minimum meet the performance, availability, jitter, and delay requirements specified for Customer Interface to Central Office (CI to CO) connections in the applicable industry standards.
6.2.6.3 BellSouth shall offer the following interface transmission rates for Dedicated Transport:
6.2.6.3.1 DS0 Equivalent;
6.2.6.3.2 DS1;
6.2.6.3.3 DS3; and
6.2.6.3.4 SDH (Synchronous Digital Hierarchy) Standard interface rates are in accordance with International Telecommunications Union (ITU) Recommendation G.707 and Plesiochronous Digital Hierarchy (PDH) rates per ITU Recommendation G.704.
6.2.6.4 BellSouth shall design Dedicated Transport according to its network infrastructure. AmTel Budget Phone shall specify the termination points for Dedicated Transport.
6.2.6.5 At a minimum, Dedicated Transport shall meet each of the requirements set forth in the applicable industry technical references.
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 6.2.6.1 The entire designated transmission service (e.g., DS0, DS1, DS3) shall be dedicated to AmTel Comm South designated traffic.
6.2.6.2 For DS1 or DS3 circuits, Dedicated Transport shall at a minimum meet the performance, availability, jitter, and delay requirements specified for Customer Interface to Central Office (CI to CO) connections in the applicable industry standards.
6.2.6.3 BellSouth shall offer the following interface transmission rates for Dedicated Transport:
6.2.6.3.1 DS0 Equivalent;
6.2.6.3.2 DS1;
6.2.6.3.3 DS3; and
6.2.6.3.4 SDH (Synchronous Digital Hierarchy) Standard interface rates are in accordance with International Telecommunications Union (ITU) Recommendation G.707 and Plesiochronous Digital Hierarchy (PDH) rates per ITU Recommendation G.704.
6.2.6.4 BellSouth shall design Dedicated Transport according to its network infrastructure. AmTel Comm South shall specify the termination points for Dedicated Transport.
6.2.6.5 At a minimum, Dedicated Transport shall meet each of the requirements set forth in the applicable industry technical references.
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 6.2.6.1 The entire designated transmission service (e.g., DS0, DS1, DS3) shall be dedicated to AmTel C.M. designated traffic.
6.2.6.2 For DS1 or DS3 circuits, Dedicated Transport shall at a minimum meet the performance, availability, jitter, and delay requirements specified for Customer Interface to Central Office (CI to CO) connections in the applicable industry standards.
6.2.6.3 BellSouth shall offer the following interface transmission rates for Dedicated Transport:
6.2.6.3.1 DS0 Equivalent;
6.2.6.3.2 DS1;
6.2.6.3.3 DS3; and
6.2.6.3.4 SDH (Synchronous Digital Hierarchy) Standard interface rates are in accordance with International Telecommunications Union (ITU) Recommendation G.707 and Plesiochronous Digital Hierarchy (PDH) rates per ITU Recommendation G.704.
6.2.6.4 BellSouth shall design Dedicated Transport according to its network infrastructure. AmTel C.M. shall specify the termination points for Dedicated Transport.
6.2.6.5 At a minimum, Dedicated Transport shall meet each of the requirements set forth in the applicable industry technical references.
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 6.2.6.1 The entire designated transmission service (e.g., DS0, DS1, DS3) shall be dedicated to AmTel SPARDI designated traffic.
6.2.6.2 For DS1 or DS3 circuits, Dedicated Transport shall at a minimum meet the performance, availability, jitter, and delay requirements specified for Customer Interface to Central Office (CI to CO) connections in the applicable industry standards.
6.2.6.3 BellSouth shall offer the following interface transmission rates for Dedicated Transport:
6.2.6.3.1 DS0 Equivalent;
6.2.6.3.2 DS1;
6.2.6.3.3 DS3; and
6.2.6.3.4 SDH (Synchronous Digital Hierarchy) Standard interface rates are in accordance with International Telecommunications Union (ITU) Recommendation G.707 and Plesiochronous Digital Hierarchy (PDH) rates per ITU Recommendation G.704.
6.2.6.4 BellSouth shall design Dedicated Transport according to its network infrastructure. AmTel SPARDI shall specify the termination points for Dedicated Transport.
6.2.6.5 At a minimum, Dedicated Transport shall meet each of the requirements set forth in the applicable industry technical references.
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 6.2.6.1 The entire designated transmission service (e.g., DS0, DS1, DS3) shall be dedicated to AmTel Nex-Phon designated traffic.
6.2.6.2 For DS1 or DS3 circuits, Dedicated Transport shall at a minimum meet the performance, availability, jitter, and delay requirements specified for Customer Interface to Central Office (CI to CO) connections in the applicable industry standards.
6.2.6.3 BellSouth shall offer the following interface transmission rates for Dedicated Transport:
6.2.6.3.1 DS0 Equivalent;
6.2.6.3.2 DS1;
6.2.6.3.3 DS3; and
6.2.6.3.4 SDH (Synchronous Digital Hierarchy) Standard interface rates are in accordance with International Telecommunications Union (ITU) Recommendation G.707 and Plesiochronous Digital Hierarchy (PDH) rates per ITU Recommendation G.704.
6.2.6.4 BellSouth shall design Dedicated Transport according to its network infrastructure. AmTel Nex-Phon shall specify the termination points for Dedicated Transport.
6.2.6.5 At a minimum, Dedicated Transport shall meet each of the requirements set forth in the applicable industry technical references.
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 6.2.6.1 The entire designated transmission service (e.g., DS0, DS1, DS3) shall be dedicated to AmTel Unity Acquisition designated traffic.
6.2.6.2 For DS1 or DS3 circuits, Dedicated Transport shall at a minimum meet the performance, availability, jitter, and delay requirements specified for Customer Interface to Central Office (CI to CO) connections in the applicable industry standards.
6.2.6.3 BellSouth shall offer the following interface transmission rates for Dedicated Transport:
6.2.6.3.1 DS0 Equivalent;
6.2.6.3.2 DS1;
6.2.6.3.3 DS3; and
6.2.6.3.4 SDH (Synchronous Digital Hierarchy) Standard interface rates are in accordance with International Telecommunications Union (ITU) Recommendation G.707 and Plesiochronous Digital Hierarchy (PDH) rates per ITU Recommendation G.704.
6.2.6.4 BellSouth shall design Dedicated Transport according to its network infrastructure. AmTel Unity Acquisition shall specify the termination points for Dedicated Transport.
6.2.6.5 At a minimum, Dedicated Transport shall meet each of the requirements set forth in the applicable industry technical references.
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 6.2.6.1 The entire designated transmission service (e.g., DS0, DS1, DS3) shall be dedicated to AmTel US LEC designated traffic.
6.2.6.2 For DS1 or DS3 circuits, Dedicated Transport shall at a minimum meet the performance, availability, jitter, and delay requirements specified for Customer Interface to Central Office (CI to CO) connections in the applicable industry standards.
6.2.6.3 BellSouth shall offer the following interface transmission rates for Dedicated Transport:
6.2.6.3.1 DS0 Equivalent;
6.2.6.3.2 DS1;
6.2.6.3.3 DS3; and
6.2.6.3.4 SDH (Synchronous Digital Hierarchy) Standard interface rates are in accordance with International Telecommunications Union (ITU) Recommendation G.707 and Plesiochronous Digital Hierarchy (PDH) rates per ITU Recommendation G.704.
6.2.6.4 BellSouth shall design Dedicated Transport according to its network infrastructure. AmTel US LEC shall specify the termination points for Dedicated Transport.
6.2.6.5 At a minimum, Dedicated Transport shall meet each of the requirements set forth in the applicable industry technical references.
Appears in 1 contract
Sources: Clec Agreement
Technical Requirements. 6.2.6.1 The entire designated transmission service (e.g., DS0, DS1, DS3) shall be dedicated to AmTel Micro-Comm designated traffic.
6.2.6.2 For DS1 or DS3 circuits, Dedicated Transport shall at a minimum meet the performance, availability, jitter, and delay requirements specified for Customer Interface to Central Office (CI to CO) connections in the applicable industry standards.
6.2.6.3 BellSouth shall offer the following interface transmission rates for Dedicated Transport:
6.2.6.3.1 DS0 Equivalent;
6.2.6.3.2 DS1;
6.2.6.3.3 DS3; and
6.2.6.3.4 SDH (Synchronous Digital Hierarchy) Standard interface rates are in accordance with International Telecommunications Union (ITU) Recommendation G.707 and Plesiochronous Digital Hierarchy (PDH) rates per ITU Recommendation G.704.
6.2.6.4 BellSouth shall design Dedicated Transport according to its network infrastructure. AmTel Micro-Comm shall specify the termination points for Dedicated Transport.
6.2.6.5 At a minimum, Dedicated Transport shall meet each of the requirements set forth in the applicable industry technical references.
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 6.2.6.1 The entire designated transmission service (e.g., DS0, DS1, DS3) shall be dedicated to AmTel Nexus designated traffic.
6.2.6.2 For DS1 or DS3 circuits, Dedicated Transport shall at a minimum meet the performance, availability, jitter, and delay requirements specified for Customer Interface to Central Office (CI to CO) connections in the applicable industry standards.
6.2.6.3 BellSouth shall offer the following interface transmission rates for Dedicated Transport:
6.2.6.3.1 DS0 Equivalent;
6.2.6.3.2 DS1;
6.2.6.3.3 DS3; and
6.2.6.3.4 SDH (Synchronous Digital Hierarchy) Standard interface rates are in accordance with International Telecommunications Union (ITU) Recommendation G.707 and Plesiochronous Digital Hierarchy (PDH) rates per ITU Recommendation G.704.
6.2.6.4 BellSouth shall design Dedicated Transport according to its network infrastructure. AmTel Nexus shall specify the termination points for Dedicated Transport.
6.2.6.5 At a minimum, Dedicated Transport shall meet each of the requirements set forth in the applicable industry technical references.
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 6.2.6.1 The entire designated transmission service (e.g., DS0, DS1, DS3) shall be dedicated to AmTel FPB designated traffic.
6.2.6.2 For DS1 or DS3 circuits, Dedicated Transport shall at a minimum meet the performance, availability, jitter, and delay requirements specified for Customer Interface to Central Office (CI to CO) connections in the applicable industry standards.
6.2.6.3 BellSouth shall offer the following interface transmission rates for Dedicated Transport:
6.2.6.3.1 DS0 Equivalent;
6.2.6.3.2 DS1;
6.2.6.3.3 DS3; and
6.2.6.3.4 SDH (Synchronous Digital Hierarchy) Standard interface rates are in accordance with International Telecommunications Union (ITU) Recommendation G.707 and Plesiochronous Digital Hierarchy (PDH) rates per ITU Recommendation G.704.
6.2.6.4 BellSouth shall design Dedicated Transport according to its network infrastructure. AmTel FPB shall specify the termination points for Dedicated Transport.
6.2.6.5 At a minimum, Dedicated Transport shall meet each of the requirements set forth in the applicable industry technical references.
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 6.2.6.1 The entire designated transmission service (e.g., DS0, DS1, DS3) shall be dedicated to AmTel AirCover designated traffic.
6.2.6.2 For DS1 or DS3 circuits, Dedicated Transport shall at a minimum meet the performance, availability, jitter, and delay requirements specified for Customer Interface to Central Office (CI to CO) connections in the applicable industry standards.
6.2.6.3 BellSouth shall offer the following interface transmission rates for Dedicated Transport:
6.2.6.3.1 DS0 Equivalent;
6.2.6.3.2 DS1;
6.2.6.3.3 DS3; and
6.2.6.3.4 SDH (Synchronous Digital Hierarchy) Standard interface rates are in accordance with International Telecommunications Union (ITU) Recommendation G.707 and Plesiochronous Digital Hierarchy (PDH) rates per ITU Recommendation G.704.
6.2.6.4 BellSouth shall design Dedicated Transport according to its network infrastructure. AmTel AirCover shall specify the termination points for Dedicated Transport.
6.2.6.5 At a minimum, Dedicated Transport shall meet each of the requirements set forth in the applicable industry technical references.
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 6.2.6.1 The entire designated transmission service (e.g., DS0, DS1, DS3) shall be dedicated to AmTel Georgia Prepaid designated traffic.
6.2.6.2 For DS1 or DS3 circuits, Dedicated Transport shall at a minimum meet the performance, availability, jitter, and delay requirements specified for Customer Interface to Central Office (CI to CO) connections in the applicable industry standards.
6.2.6.3 BellSouth shall offer the following interface transmission rates for Dedicated Transport:
6.2.6.3.1 DS0 Equivalent;
6.2.6.3.2 DS1;
6.2.6.3.3 DS3; and
6.2.6.3.4 SDH (Synchronous Digital Hierarchy) Standard interface rates are in accordance with International Telecommunications Union (ITU) Recommendation G.707 and Plesiochronous Digital Hierarchy (PDH) rates per ITU Recommendation G.704.
6.2.6.4 BellSouth shall design Dedicated Transport according to its network infrastructure. AmTel Georgia Prepaid shall specify the termination points for Dedicated Transport.
6.2.6.5 At a minimum, Dedicated Transport shall meet each of the requirements set forth in the applicable industry technical references.
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 6.2.6.1 The entire designated transmission service (e.g., DS0, DS1, DS3) shall be dedicated to AmTel ▇▇▇▇ designated traffic.
6.2.6.2 For DS1 or DS3 circuits, Dedicated Transport shall at a minimum meet the performance, availability, jitter, and delay requirements specified for Customer Interface to Central Office (CI to CO) connections in the applicable industry standards.
6.2.6.3 BellSouth shall offer the following interface transmission rates for Dedicated Transport:
6.2.6.3.1 DS0 Equivalent;
6.2.6.3.2 DS1;
6.2.6.3.3 DS3; and
6.2.6.3.4 SDH (Synchronous Digital Hierarchy) Standard interface rates are in accordance with International Telecommunications Union (ITU) Recommendation G.707 and Plesiochronous Digital Hierarchy (PDH) rates per ITU Recommendation G.704.
6.2.6.4 BellSouth shall design Dedicated Transport according to its network infrastructure. AmTel ▇▇▇▇ shall specify the termination points for Dedicated Transport.
6.2.6.5 At a minimum, Dedicated Transport shall meet each of the requirements set forth in the applicable industry technical references.
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 6.2.6.1 The entire designated transmission service (e.g., DS0, DS1, DS3) shall be dedicated to AmTel Covista designated traffic.
6.2.6.2 For DS1 or DS3 circuits, Dedicated Transport shall at a minimum meet the performance, availability, jitter, and delay requirements specified for Customer Interface to Central Office (CI to CO) connections in the applicable industry standards.
6.2.6.3 BellSouth shall offer the following interface transmission rates for Dedicated Transport:
6.2.6.3.1 DS0 Equivalent;
6.2.6.3.2 DS1;
6.2.6.3.3 DS3; and
6.2.6.3.4 SDH (Synchronous Digital Hierarchy) Standard interface rates are in accordance with International Telecommunications Union (ITU) Recommendation G.707 and Plesiochronous Digital Hierarchy (PDH) rates per ITU Recommendation G.704.
6.2.6.4 BellSouth shall design Dedicated Transport according to its network infrastructure. AmTel Covista shall specify the termination points for Dedicated Transport.
6.2.6.5 At a minimum, Dedicated Transport shall meet each of the requirements set forth in the applicable industry technical references.
Appears in 1 contract
Sources: Clec Agreement
Technical Requirements. 6.2.6.1 The entire designated transmission service (e.g., DS0, DS1, DS3) shall be dedicated to AmTel COMTECH21 designated traffic.
6.2.6.2 For DS1 or DS3 circuits, Dedicated Transport shall at a minimum meet the performance, availability, jitter, and delay requirements specified for Customer Interface to Central Office (CI to CO) connections in the applicable industry standards.
6.2.6.3 BellSouth shall offer the following interface transmission rates for Dedicated Transport:
6.2.6.3.1 DS0 Equivalent;
6.2.6.3.2 DS1;
6.2.6.3.3 DS3; and
6.2.6.3.4 SDH (Synchronous Digital Hierarchy) Standard interface rates are in accordance with International Telecommunications Union (ITU) Recommendation G.707 and Plesiochronous Digital Hierarchy (PDH) rates per ITU Recommendation G.704.
6.2.6.4 BellSouth shall design Dedicated Transport according to its network infrastructure. AmTel COMTECH21 shall specify the termination points for Dedicated Transport.
6.2.6.5 At a minimum, Dedicated Transport shall meet each of the requirements set forth in the applicable industry technical references.
Appears in 1 contract
Sources: Clec Agreement
Technical Requirements. 6.2.6.1 The entire designated transmission service (e.g., DS0, DS1, DS3) shall be dedicated to AmTel ONS designated traffic.
6.2.6.2 For DS1 or DS3 circuits, Dedicated Transport shall at a minimum meet the performance, availability, jitter, and delay requirements specified for Customer Interface to Central Office (CI to CO) connections in the applicable industry standards.
6.2.6.3 BellSouth shall offer the following interface transmission rates for Dedicated Transport:
6.2.6.3.1 DS0 Equivalent;
6.2.6.3.2 DS1;
6.2.6.3.3 DS3; and
6.2.6.3.4 SDH (Synchronous Digital Hierarchy) Standard interface rates are in accordance with International Telecommunications Union (ITU) Recommendation G.707 and Plesiochronous Digital Hierarchy (PDH) rates per ITU Recommendation G.704.
6.2.6.4 BellSouth shall design Dedicated Transport according to its network infrastructure. AmTel ONS shall specify the termination points for Dedicated Transport.
6.2.6.5 At a minimum, Dedicated Transport shall meet each of the requirements set forth in the applicable industry technical references.
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 6.2.6.1 The entire designated transmission service (e.g., DS0, DS1, DS3) shall be dedicated to AmTel Ruddata designated traffic.
6.2.6.2 For DS1 or DS3 circuits, Dedicated Transport shall at a minimum meet the performance, availability, jitter, and delay requirements specified for Customer Interface to Central Office (CI to CO) connections in the applicable industry standards.
6.2.6.3 BellSouth shall offer the following interface transmission rates for Dedicated Transport:
6.2.6.3.1 DS0 Equivalent;
6.2.6.3.2 DS1;
6.2.6.3.3 DS3; and
6.2.6.3.4 SDH (Synchronous Digital Hierarchy) Standard interface rates are in accordance with International Telecommunications Union (ITU) Recommendation G.707 and Plesiochronous Digital Hierarchy (PDH) rates per ITU Recommendation G.704.
6.2.6.4 BellSouth shall design Dedicated Transport according to its network infrastructure. AmTel Ruddata shall specify the termination points for Dedicated Transport.
6.2.6.5 At a minimum, Dedicated Transport shall meet each of the requirements set forth in the applicable industry technical references.
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 6.2.6.1 The entire designated transmission service (e.g., DS0, DS1, DS3) shall be dedicated to AmTel Gateway designated traffic.
6.2.6.2 For DS1 or DS3 circuits, Dedicated Transport shall at a minimum meet the performance, availability, jitter, and delay requirements specified for Customer Interface to Central Office (CI to CO) connections in the applicable industry standards.
6.2.6.3 BellSouth shall offer the following interface transmission rates for Dedicated Transport:
6.2.6.3.1 DS0 Equivalent;
6.2.6.3.2 DS1;
6.2.6.3.3 DS3; and
6.2.6.3.4 SDH (Synchronous Digital Hierarchy) Standard interface rates are in accordance with International Telecommunications Union (ITU) Recommendation G.707 and Plesiochronous Digital Hierarchy (PDH) rates per ITU Recommendation G.704.
6.2.6.4 BellSouth shall design Dedicated Transport according to its network infrastructure. AmTel Gateway shall specify the termination points for Dedicated Transport.
6.2.6.5 At a minimum, Dedicated Transport shall meet each of the requirements set forth in the applicable industry technical references.
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 6.2.6.1 6.2.2.1 The entire designated transmission service (e.g., DS0, DS1, DS3) shall be dedicated to AmTel FPB designated traffic.
6.2.6.2 6.2.2.2 For DS1 or DS3 circuits, Dedicated Transport shall at a minimum meet the performance, availability, jitter, and delay requirements specified for Customer Interface to Central Office (CI to CO) connections in the applicable industry standards.
6.2.6.3 6.2.2.3 BellSouth shall offer the following interface transmission rates for Dedicated Transport:
6.2.6.3.1 6.2.2.3.1 DS0 Equivalent;
6.2.6.3.2 6.2.2.3.2 DS1;
6.2.6.3.3 6.2.2.3.3 DS3; and
6.2.6.3.4 6.2.2.3.4 SDH (Synchronous Digital Hierarchy) Standard interface rates are in accordance with International Telecommunications Union (ITU) Recommendation G.707 and Plesiochronous Digital Hierarchy (PDH) rates per ITU Recommendation G.704.
6.2.6.4 6.2.2.4 BellSouth shall design Dedicated Transport according to its network infrastructure. AmTel FPB shall specify the termination points for Dedicated Transport.
6.2.6.5 6.2.2.5 At a minimum, Dedicated Transport shall meet each of the requirements set forth in the applicable industry technical references.
Appears in 1 contract
Sources: Clec Agreement
Technical Requirements. 6.2.6.1 The entire designated transmission service (e.g., DS0, DS1, DS3) shall be dedicated to AmTel Pilgrim Telephone designated traffic.
6.2.6.2 For DS1 or DS3 circuits, Dedicated Transport shall at a minimum meet the performance, availability, jitter, and delay requirements specified for Customer Interface to Central Office (CI to CO) connections in the applicable industry standards.
6.2.6.3 BellSouth shall offer the following interface transmission rates for Dedicated Transport:
6.2.6.3.1 DS0 Equivalent;
6.2.6.3.2 DS1;
6.2.6.3.3 DS3; and
6.2.6.3.4 SDH (Synchronous Digital Hierarchy) Standard interface rates are in accordance with International Telecommunications Union (ITU) Recommendation G.707 and Plesiochronous Digital Hierarchy (PDH) rates per ITU Recommendation G.704.
6.2.6.4 BellSouth shall design Dedicated Transport according to its network infrastructure. AmTel Pilgrim Telephone shall specify the termination points for Dedicated Transport.
6.2.6.5 At a minimum, Dedicated Transport shall meet each of the requirements set forth in the applicable industry technical references.
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 6.2.6.1 The entire designated transmission service (e.g., DS0, DS1, DS3) shall be dedicated to AmTel AmeriMex designated traffic.
6.2.6.2 For DS1 or DS3 circuits, Dedicated Transport shall at a minimum meet the performance, availability, jitter, and delay requirements specified for Customer Interface to Central Office (CI to CO) connections in the applicable industry standards.
6.2.6.3 BellSouth shall offer the following interface transmission rates for Dedicated Transport:
6.2.6.3.1 DS0 Equivalent;
6.2.6.3.2 DS1;
6.2.6.3.3 DS3; and
6.2.6.3.4 SDH (Synchronous Digital Hierarchy) Standard interface rates are in accordance with International Telecommunications Union (ITU) Recommendation G.707 and Plesiochronous Digital Hierarchy (PDH) rates per ITU Recommendation G.704.
6.2.6.4 BellSouth shall design Dedicated Transport according to its network infrastructure. AmTel AmeriMex shall specify the termination points for Dedicated Transport.
6.2.6.5 At a minimum, Dedicated Transport shall meet each of the requirements set forth in the applicable industry technical references.
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 6.2.6.1 The entire designated transmission service (e.g., DS0, DS1, DS3) shall be dedicated to AmTel NTBS designated traffic.
6.2.6.2 For DS1 or DS3 circuits, Dedicated Transport shall at a minimum meet the performance, availability, jitter, and delay requirements specified for Customer Interface to Central Office (CI to CO) connections in the applicable industry standards.
6.2.6.3 BellSouth shall offer the following interface transmission rates for Dedicated Transport:
6.2.6.3.1 DS0 Equivalent;
6.2.6.3.2 DS1;
6.2.6.3.3 DS3; and
6.2.6.3.4 SDH (Synchronous Digital Hierarchy) Standard interface rates are in accordance with International Telecommunications Union (ITU) Recommendation G.707 and Plesiochronous Digital Hierarchy (PDH) rates per ITU Recommendation G.704.
6.2.6.4 BellSouth shall design Dedicated Transport according to its network infrastructure. AmTel NTBS shall specify the termination points for Dedicated Transport.
6.2.6.5 At a minimum, Dedicated Transport shall meet each of the requirements set forth in the applicable industry technical references.
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 6.2.6.1 The entire designated transmission service (e.g., DS0, DS1, DS3) shall be dedicated to AmTel Tel West designated traffic.
6.2.6.2 For DS1 or DS3 circuits, Dedicated Transport shall at a minimum meet the performance, availability, jitter, and delay requirements specified for Customer Interface to Central Office (CI to CO) connections in the applicable industry standards.
6.2.6.3 BellSouth shall offer the following interface transmission rates for Dedicated Transport:
6.2.6.3.1 DS0 Equivalent;
6.2.6.3.2 DS1;
6.2.6.3.3 DS3; and
6.2.6.3.4 SDH (Synchronous Digital Hierarchy) Standard interface rates are in accordance with International Telecommunications Union (ITU) Recommendation G.707 and Plesiochronous Digital Hierarchy (PDH) rates per ITU Recommendation G.704.
6.2.6.4 BellSouth shall design Dedicated Transport according to its network infrastructure. AmTel Tel West shall specify the termination points for Dedicated Transport.
6.2.6.5 At a minimum, Dedicated Transport shall meet each of the requirements set forth in the applicable industry technical references.
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 6.2.6.1 The entire designated transmission service (e.g., DS0, DS1, DS3) shall be dedicated to AmTel e-Tel designated traffic.
6.2.6.2 For DS1 or DS3 circuits, Dedicated Transport shall at a minimum meet the performance, availability, jitter, and delay requirements specified for Customer Interface to Central Office (CI to CO) connections in the applicable industry standards.
6.2.6.3 BellSouth shall offer the following interface transmission rates for Dedicated Transport:
6.2.6.3.1 DS0 Equivalent;
6.2.6.3.2 DS1;
6.2.6.3.3 DS3; and
6.2.6.3.4 SDH (Synchronous Digital Hierarchy) Standard interface rates are in accordance with International Telecommunications Union (ITU) Recommendation G.707 and Plesiochronous Digital Hierarchy (PDH) rates per ITU Recommendation G.704.
6.2.6.4 BellSouth shall design Dedicated Transport according to its network infrastructure. AmTel e-Tel shall specify the termination points for Dedicated Transport.
6.2.6.5 At a minimum, Dedicated Transport shall meet each of the requirements set forth in the applicable industry technical references.
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 6.2.6.1 The entire designated transmission service (e.g., DS0, DS1, DS3) shall be dedicated to AmTel CBX One-Stop designated traffic.
6.2.6.2 For DS1 or DS3 circuits, Dedicated Transport shall at a minimum meet the performance, availability, jitter, and delay requirements specified for Customer Interface to Central Office (CI to CO) connections in the applicable industry standards.
6.2.6.3 BellSouth shall offer the following interface transmission rates for Dedicated Transport:
6.2.6.3.1 DS0 Equivalent;
6.2.6.3.2 DS1;
6.2.6.3.3 DS3; and
6.2.6.3.4 SDH (Synchronous Digital Hierarchy) Standard interface rates are in accordance with International Telecommunications Union (ITU) Recommendation G.707 and Plesiochronous Digital Hierarchy (PDH) rates per ITU Recommendation G.704.
6.2.6.4 BellSouth shall design Dedicated Transport according to its network infrastructure. AmTel CBX One-Stop shall specify the termination points for Dedicated Transport.
6.2.6.5 At a minimum, Dedicated Transport shall meet each of the requirements set forth in the applicable industry technical references.
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 6.2.6.1 The entire designated transmission service (e.g., DS0, DS1, DS3) shall be dedicated to AmTel Seven Bridges designated traffic.
6.2.6.2 For DS1 or DS3 circuits, Dedicated Transport shall at a minimum meet the performance, availability, jitter, and delay requirements specified for Customer Interface to Central Office (CI to CO) connections in the applicable industry standards.
6.2.6.3 BellSouth shall offer the following interface transmission rates for Dedicated Transport:
6.2.6.3.1 DS0 Equivalent;
6.2.6.3.2 DS1;
6.2.6.3.3 DS3; and
6.2.6.3.4 SDH (Synchronous Digital Hierarchy) Standard interface rates are in accordance with International Telecommunications Union (ITU) Recommendation G.707 and Plesiochronous Digital Hierarchy (PDH) rates per ITU Recommendation G.704.
6.2.6.4 BellSouth shall design Dedicated Transport according to its network infrastructure. AmTel Seven Bridges shall specify the termination points for Dedicated Transport.
6.2.6.5 At a minimum, Dedicated Transport shall meet each of the requirements set forth in the applicable industry technical references.
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 6.2.6.1 The entire designated transmission service (e.g., DS0, DS1, DS3) shall be dedicated to AmTel Symtelco designated traffic.
6.2.6.2 For DS1 or DS3 circuits, Dedicated Transport shall at a minimum meet the performance, availability, jitter, and delay requirements specified for Customer Interface to Central Office (CI to CO) connections in the applicable industry standards.
6.2.6.3 BellSouth shall offer the following interface transmission rates for Dedicated Transport:
6.2.6.3.1 DS0 Equivalent;
6.2.6.3.2 DS1;
6.2.6.3.3 DS3; and
6.2.6.3.4 SDH (Synchronous Digital Hierarchy) Standard interface rates are in accordance with International Telecommunications Union (ITU) Recommendation G.707 and Plesiochronous Digital Hierarchy (PDH) rates per ITU Recommendation G.704.
6.2.6.4 BellSouth shall design Dedicated Transport according to its network infrastructure. AmTel Symtelco shall specify the termination points for Dedicated Transport.
6.2.6.5 At a minimum, Dedicated Transport shall meet each of the requirements set forth in the applicable industry technical references.
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 6.2.6.1 The entire designated transmission service (e.g., DS0, DS1, DS3) shall be dedicated to AmTel Velocity designated traffic.
6.2.6.2 For DS1 or DS3 circuits, Dedicated Transport shall at a minimum meet the performance, availability, jitter, and delay requirements specified for Customer Interface to Central Office (CI to CO) connections in the applicable industry standards.
6.2.6.3 BellSouth shall offer the following interface transmission rates for Dedicated Transport:
6.2.6.3.1 DS0 Equivalent;
6.2.6.3.2 DS1;
6.2.6.3.3 DS3; and
6.2.6.3.4 SDH (Synchronous Digital Hierarchy) Standard interface rates are in accordance with International Telecommunications Union (ITU) Recommendation G.707 and Plesiochronous Digital Hierarchy (PDH) rates per ITU Recommendation G.704.
6.2.6.4 BellSouth shall design Dedicated Transport according to its network infrastructure. AmTel Velocity shall specify the termination points for Dedicated Transport.
6.2.6.5 At a minimum, Dedicated Transport shall meet each of the requirements set forth in the applicable industry technical references.
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 6.2.6.1 The entire designated transmission service (e.g., DS0, DS1, DS3) shall be dedicated to AmTel ACN designated traffic.
6.2.6.2 For DS1 or DS3 circuits, Dedicated Transport shall at a minimum meet the performance, availability, jitter, and delay requirements specified for Customer Interface to Central Office (CI to CO) connections in the applicable industry standards.
6.2.6.3 BellSouth shall offer the following interface transmission rates for Dedicated Transport:
6.2.6.3.1 DS0 Equivalent;
6.2.6.3.2 DS1;
6.2.6.3.3 DS3; and
6.2.6.3.4 SDH (Synchronous Digital Hierarchy) Standard interface rates are in accordance with International Telecommunications Union (ITU) Recommendation G.707 and Plesiochronous Digital Hierarchy (PDH) rates per ITU Recommendation G.704.
6.2.6.4 BellSouth shall design Dedicated Transport according to its network infrastructure. AmTel ACN shall specify the termination points for Dedicated Transport.
6.2.6.5 At a minimum, Dedicated Transport shall meet each of the requirements set forth in the applicable industry technical references.
Appears in 1 contract
Sources: Clec Agreement
Technical Requirements. 6.2.6.1 The entire designated transmission service (e.g., DS0, DS1, DS3) shall be dedicated to AmTel OnePoint Communications designated traffic.
6.2.6.2 For DS1 or DS3 circuits, Dedicated Transport shall at a minimum meet the performance, availability, jitter, and delay requirements specified for Customer Interface to Central Office (CI to CO) connections in the applicable industry standards.
6.2.6.3 BellSouth shall offer the following interface transmission rates for Dedicated Transport:
6.2.6.3.1 DS0 Equivalent;
6.2.6.3.2 DS1;
6.2.6.3.3 DS3; and
6.2.6.3.4 SDH (Synchronous Digital Hierarchy) Standard interface rates are in accordance with International Telecommunications Union (ITU) Recommendation G.707 and Plesiochronous Digital Hierarchy (PDH) rates per ITU Recommendation G.704.
6.2.6.4 BellSouth shall design Dedicated Transport according to its network infrastructure. AmTel OnePoint Communications shall specify the termination points for Dedicated Transport.
6.2.6.5 At a minimum, Dedicated Transport shall meet each of the requirements set forth in the applicable industry technical references.
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 6.2.6.1 The entire designated transmission service (e.g., DS0, DS1, DS3) shall be dedicated to AmTel ICG designated traffic.
6.2.6.2 For DS1 or DS3 circuits, Dedicated Transport shall at a minimum meet the performance, availability, jitter, and delay requirements specified for Customer Interface to Central Office (CI to CO) connections in the applicable industry standards.
6.2.6.3 BellSouth shall offer the following interface transmission rates for Dedicated Transport:
6.2.6.3.1 DS0 Equivalent;
6.2.6.3.2 DS1;
6.2.6.3.3 DS3; and
6.2.6.3.4 SDH (Synchronous Digital Hierarchy) Standard interface rates are in accordance with International Telecommunications Union (ITU) Recommendation G.707 and Plesiochronous Digital Hierarchy (PDH) rates per ITU Recommendation G.704.
6.2.6.4 BellSouth shall design Dedicated Transport according to its network infrastructure. AmTel ICG shall specify the termination points for Dedicated Transport.
6.2.6.5 At a minimum, Dedicated Transport shall meet each of the requirements set forth in the applicable industry technical references.
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 6.2.6.1 The entire designated transmission service (e.g., DS0, DS1, DS3) shall be dedicated to AmTel MyLineToo designated traffic.
6.2.6.2 For DS1 or DS3 circuits, Dedicated Transport shall at a minimum meet the performance, availability, jitter, and delay requirements specified for Customer Interface to Central Office (CI to CO) connections in the applicable industry standards.
6.2.6.3 BellSouth shall offer the following interface transmission rates for Dedicated Transport:
6.2.6.3.1 DS0 Equivalent;
6.2.6.3.2 DS1;
6.2.6.3.3 DS3; and
6.2.6.3.4 SDH (Synchronous Digital Hierarchy) Standard interface rates are in accordance with International Telecommunications Union (ITU) Recommendation G.707 and Plesiochronous Digital Hierarchy (PDH) rates per ITU Recommendation G.704.
6.2.6.4 BellSouth shall design Dedicated Transport according to its network infrastructure. AmTel MyLineToo shall specify the termination points for Dedicated Transport.
6.2.6.5 At a minimum, Dedicated Transport shall meet each of the requirements set forth in the applicable industry technical references.
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 6.2.6.1 The entire designated transmission service (e.g., DS0, DS1, DS3) shall be dedicated to AmTel NationsLink designated traffic.
6.2.6.2 For DS1 or DS3 circuits, Dedicated Transport shall at a minimum meet the performance, availability, jitter, and delay requirements specified for Customer Interface to Central Office (CI to CO) connections in the applicable industry standards.
6.2.6.3 BellSouth shall offer the following interface transmission rates for Dedicated Transport:
6.2.6.3.1 DS0 Equivalent;
6.2.6.3.2 DS1;
6.2.6.3.3 DS3; and
6.2.6.3.4 SDH (Synchronous Digital Hierarchy) Standard interface rates are in accordance with International Telecommunications Union (ITU) Recommendation G.707 and Plesiochronous Digital Hierarchy (PDH) rates per ITU Recommendation G.704.
6.2.6.4 BellSouth shall design Dedicated Transport according to its network infrastructure. AmTel NationsLink shall specify the termination points for Dedicated Transport.
6.2.6.5 At a minimum, Dedicated Transport shall meet each of the requirements set forth in the applicable industry technical references.
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 6.2.6.1 The entire designated transmission service (e.g., DS0, DS1, DS3) shall be dedicated to AmTel Columbus Local designated traffic.
6.2.6.2 For DS1 or DS3 circuits, Dedicated Transport shall at a minimum meet the performance, availability, jitter, and delay requirements specified for Customer Interface to Central Office (CI to CO) connections in the applicable industry standards.
6.2.6.3 BellSouth shall offer the following interface transmission rates for Dedicated Transport:
6.2.6.3.1 DS0 Equivalent;
6.2.6.3.2 DS1;
6.2.6.3.3 DS3; and
6.2.6.3.4 SDH (Synchronous Digital Hierarchy) Standard interface rates are in accordance with International Telecommunications Union (ITU) Recommendation G.707 and Plesiochronous Digital Hierarchy (PDH) rates per ITU Recommendation G.704.
6.2.6.4 BellSouth shall design Dedicated Transport according to its network infrastructure. AmTel Columbus Local shall specify the termination points for Dedicated Transport.
6.2.6.5 At a minimum, Dedicated Transport shall meet each of the requirements set forth in the applicable industry technical references.
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 6.2.6.1 The entire designated transmission service (e.g., DS0, DS1, DS3) shall be dedicated to AmTel Metro Teleconnect designated traffic.
6.2.6.2 For DS1 or DS3 circuits, Dedicated Transport shall at a minimum meet the performance, availability, jitter, and delay requirements specified for Customer Interface to Central Office (CI to CO) connections in the applicable industry standards.
6.2.6.3 BellSouth shall offer the following interface transmission rates for Dedicated Transport:
6.2.6.3.1 DS0 Equivalent;
6.2.6.3.2 DS1;
6.2.6.3.3 DS3; and
6.2.6.3.4 SDH (Synchronous Digital Hierarchy) Standard interface rates are in accordance with International Telecommunications Union (ITU) Recommendation G.707 and Plesiochronous Digital Hierarchy (PDH) rates per ITU Recommendation G.704.
6.2.6.4 BellSouth shall design Dedicated Transport according to its network infrastructure. AmTel Metro Teleconnect shall specify the termination points for Dedicated Transport.
6.2.6.5 At a minimum, Dedicated Transport shall meet each of the requirements set forth in the applicable industry technical references.
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 6.2.6.1 The entire designated transmission service (e.g., DS0, DS1, DS3) shall be dedicated to AmTel BroadRiver designated traffic.
6.2.6.2 For DS1 or DS3 circuits, Dedicated Transport shall at a minimum meet the performance, availability, jitter, and delay requirements specified for Customer AMENDMENT EXHIBIT 1 Attachment 2 Page 48 Interface to Central Office (CI to CO) connections in the applicable industry standards.
6.2.6.3 BellSouth shall offer the following interface transmission rates for Dedicated Transport:
6.2.6.3.1 DS0 Equivalent;
6.2.6.3.2 DS1;
6.2.6.3.3 DS3; and
6.2.6.3.4 SDH (Synchronous Digital Hierarchy) Standard interface rates are in accordance with International Telecommunications Union (ITU) Recommendation G.707 and Plesiochronous Digital Hierarchy (PDH) rates per ITU Recommendation G.704.
6.2.6.4 BellSouth shall design Dedicated Transport according to its network infrastructure. AmTel BroadRiver shall specify the termination points for Dedicated Transport.
6.2.6.5 At a minimum, Dedicated Transport shall meet each of the requirements set forth in the applicable industry technical references.
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 6.2.6.1 The entire designated transmission service (e.g., DS0, DS1, DS3) shall be dedicated to AmTel ▇▇▇.▇▇▇ designated traffic.
6.2.6.2 For DS1 or DS3 circuits, Dedicated Transport shall at a minimum meet the performance, availability, jitter, and delay requirements specified for Customer Interface to Central Office (CI to CO) connections in the applicable industry standards.
6.2.6.3 BellSouth shall offer the following interface transmission rates for Dedicated Transport:
6.2.6.3.1 DS0 Equivalent;
6.2.6.3.2 DS1;
6.2.6.3.3 DS3; and
6.2.6.3.4 SDH (Synchronous Digital Hierarchy) Standard interface rates are in accordance with International Telecommunications Union (ITU) Recommendation G.707 and Plesiochronous Digital Hierarchy (PDH) rates per ITU Recommendation G.704.
6.2.6.4 BellSouth shall design Dedicated Transport according to its network infrastructure. AmTel ▇▇▇.▇▇▇ shall specify the termination points for Dedicated Transport.
6.2.6.5 At a minimum, Dedicated Transport shall meet each of the requirements set forth in the applicable industry technical references.
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 6.2.6.1 The entire designated transmission service (e.g., DS0, DS1, DS3) shall be dedicated to AmTel FLATEL designated traffic.
6.2.6.2 For DS1 or DS3 circuits, Dedicated Transport shall at a minimum meet the performance, availability, jitter, and delay requirements specified for Customer Interface to Central Office (CI to CO) connections in the applicable industry standards.
6.2.6.3 BellSouth shall offer the following interface transmission rates for Dedicated Transport:
6.2.6.3.1 DS0 Equivalent;
6.2.6.3.2 DS1;
6.2.6.3.3 DS3; and
6.2.6.3.4 SDH (Synchronous Digital Hierarchy) Standard interface rates are in accordance with International Telecommunications Union (ITU) Recommendation G.707 and Plesiochronous Digital Hierarchy (PDH) rates per ITU Recommendation G.704.
6.2.6.4 BellSouth shall design Dedicated Transport according to its network infrastructure. AmTel FLATEL shall specify the termination points for Dedicated Transport.
6.2.6.5 At a minimum, Dedicated Transport shall meet each of the requirements set forth in the applicable industry technical references.
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 6.2.6.1 The entire designated transmission service (e.g., DS0, DS1, DS3) shall be dedicated to AmTel Advantage Group designated traffic.
6.2.6.2 For DS1 or DS3 circuits, Dedicated Transport shall at a minimum meet the performance, availability, jitter, and delay requirements specified for Customer Interface to Central Office (CI to CO) connections in the applicable industry standards.
6.2.6.3 BellSouth shall offer the following interface transmission rates for Dedicated Transport:
6.2.6.3.1 DS0 Equivalent;
6.2.6.3.2 DS1;
6.2.6.3.3 DS3; and
6.2.6.3.4 SDH (Synchronous Digital Hierarchy) Standard interface rates are in accordance with International Telecommunications Union (ITU) Recommendation G.707 and Plesiochronous Digital Hierarchy (PDH) rates per ITU Recommendation G.704.
6.2.6.4 BellSouth shall design Dedicated Transport according to its network infrastructure. AmTel Advantage Group shall specify the termination points for Dedicated Transport.
6.2.6.5 At a minimum, Dedicated Transport shall meet each of the requirements set forth in the applicable industry technical references.
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 6.2.6.1 The entire designated transmission service (e.g., DS0, DS1, DS3) shall be dedicated to AmTel Grande designated traffic.
6.2.6.2 For DS1 or DS3 circuits, Dedicated Transport shall at a minimum meet the performance, availability, jitter, and delay requirements specified for Customer Interface to Central Office (CI to CO) connections in the applicable industry standards.
6.2.6.3 BellSouth shall offer the following interface transmission rates for Dedicated Transport:
6.2.6.3.1 DS0 Equivalent;
6.2.6.3.2 DS1;
6.2.6.3.3 DS3; and
6.2.6.3.4 SDH (Synchronous Digital Hierarchy) Standard interface rates are in accordance with International Telecommunications Union (ITU) Recommendation G.707 and Plesiochronous Digital Hierarchy (PDH) rates per ITU Recommendation G.704.
6.2.6.4 BellSouth shall design Dedicated Transport according to its network infrastructure. AmTel Grande shall specify the termination points for Dedicated Transport.
6.2.6.5 At a minimum, Dedicated Transport shall meet each of the requirements set forth in the applicable industry technical references.
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 6.2.6.1 The entire designated transmission service (e.g., DS0, DS1, DS3) shall be dedicated to AmTel USA Telecom, Inc. designated traffic.
6.2.6.2 For DS1 or DS3 circuits, Dedicated Transport shall at a minimum meet the performance, availability, jitter, and delay requirements specified for Customer Interface to Central Office (CI to CO) connections in the applicable industry standards.
6.2.6.3 BellSouth shall offer the following interface transmission rates for Dedicated Transport:
6.2.6.3.1 DS0 Equivalent;
6.2.6.3.2 DS1;
6.2.6.3.3 DS3; and
6.2.6.3.4 SDH (Synchronous Digital Hierarchy) Standard interface rates are in accordance with International Telecommunications Union (ITU) Recommendation G.707 and Plesiochronous Digital Hierarchy (PDH) rates per ITU Recommendation G.704.
6.2.6.4 BellSouth shall design Dedicated Transport according to its network infrastructure. AmTel USA Telecom, Inc. shall specify the termination points for Dedicated Transport.
6.2.6.5 At a minimum, Dedicated Transport shall meet each of the requirements set forth in the applicable industry technical references.
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 6.2.6.1 The entire designated transmission service (e.g., DS0, DS1, DS3) shall be dedicated to AmTel EPICUS designated traffic.
6.2.6.2 For DS1 or DS3 circuits, Dedicated Transport shall at a minimum meet the performance, availability, jitter, and delay requirements specified for Customer Interface to Central Office (CI to CO) connections in the applicable industry standards.
6.2.6.3 BellSouth shall offer the following interface transmission rates for Dedicated Transport:
6.2.6.3.1 DS0 Equivalent;
6.2.6.3.2 DS1;
6.2.6.3.3 DS3; and
6.2.6.3.4 SDH (Synchronous Digital Hierarchy) Standard interface rates are in accordance with International Telecommunications Union (ITU) Recommendation G.707 and Plesiochronous Digital Hierarchy (PDH) rates per ITU Recommendation G.704.
6.2.6.4 BellSouth shall design Dedicated Transport according to its network infrastructure. AmTel EPICUS shall specify the termination points for Dedicated Transport.
6.2.6.5 At a minimum, Dedicated Transport shall meet each of the requirements set forth in the applicable industry technical references.
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 6.2.6.1 The entire designated transmission service (e.g., DS0, DS1, DS3) shall be dedicated to AmTel SC Net designated traffic.
6.2.6.2 For DS1 or DS3 circuits, Dedicated Transport shall at a minimum meet the performance, availability, jitter, and delay requirements specified for Customer Interface to Central Office (CI to CO) connections in the applicable industry standards.
6.2.6.3 BellSouth shall offer the following interface transmission rates for Dedicated Transport:
6.2.6.3.1 DS0 Equivalent;
6.2.6.3.2 DS1;
6.2.6.3.3 DS3; and
6.2.6.3.4 SDH (Synchronous Digital Hierarchy) Standard interface rates are in accordance with International Telecommunications Union (ITU) Recommendation G.707 and Plesiochronous Digital Hierarchy (PDH) rates per ITU Recommendation G.704.
6.2.6.4 BellSouth shall design Dedicated Transport according to its network infrastructure. AmTel SC Net shall specify the termination points for Dedicated Transport.
6.2.6.5 At a minimum, Dedicated Transport shall meet each of the requirements set forth in the applicable industry technical references.. AMENDMENT EXHIBIT 1
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 6.2.6.1 The entire designated transmission service (e.g., DS0, DS1, DS3) shall be dedicated to AmTel DPI Teleconnect designated traffic.
6.2.6.2 For DS1 or DS3 circuits, Dedicated Transport shall at a minimum meet the performance, availability, jitter, and delay requirements specified for Customer Interface to Central Office (CI to CO) connections in the applicable industry standards.
6.2.6.3 BellSouth shall offer the following interface transmission rates for Dedicated Transport:
6.2.6.3.1 DS0 Equivalent;
6.2.6.3.2 DS1;
6.2.6.3.3 DS3; and
6.2.6.3.4 SDH (Synchronous Digital Hierarchy) Standard interface rates are in accordance with International Telecommunications Union (ITU) Recommendation G.707 and Plesiochronous Digital Hierarchy (PDH) rates per ITU Recommendation G.704.
6.2.6.4 BellSouth shall design Dedicated Transport according to its network infrastructure. AmTel DPI Teleconnect shall specify the termination points for Dedicated Transport.
6.2.6.5 At a minimum, Dedicated Transport shall meet each of the requirements set forth in the applicable industry technical references.
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 6.2.6.1 The entire designated transmission service (e.g., DS0, DS1, DS3) shall be dedicated to AmTel Deland Actel designated traffic.
6.2.6.2 For DS1 or DS3 circuits, Dedicated Transport shall at a minimum meet the performance, availability, jitter, and delay requirements specified for Customer Interface to Central Office (CI to CO) connections in the applicable industry standards.
6.2.6.3 BellSouth shall offer the following interface transmission rates for Dedicated Transport:
6.2.6.3.1 DS0 Equivalent;
6.2.6.3.2 DS1;
6.2.6.3.3 DS3; and
6.2.6.3.4 SDH (Synchronous Digital Hierarchy) Standard interface rates are in accordance with International Telecommunications Union (ITU) Recommendation G.707 and Plesiochronous Digital Hierarchy (PDH) rates per ITU Recommendation G.704.
6.2.6.4 BellSouth shall design Dedicated Transport according to its network infrastructure. AmTel Deland Actel shall specify the termination points for Dedicated Transport.
6.2.6.5 At a minimum, Dedicated Transport shall meet each of the requirements set forth in the applicable industry technical references.
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 6.2.6.1 The entire designated transmission service (e.g., DS0, DS1, DS3) shall be dedicated to AmTel BSE designated traffic.
6.2.6.2 For DS1 or DS3 circuits, Dedicated Transport shall at a minimum meet the performance, availability, jitter, and delay requirements specified for Customer Interface to Central Office (CI to CO) connections in the applicable industry standards.
6.2.6.3 BellSouth shall offer the following interface transmission rates for Dedicated Transport:
6.2.6.3.1 DS0 Equivalent;
6.2.6.3.2 DS1;
6.2.6.3.3 DS3; and
6.2.6.3.4 SDH (Synchronous Digital Hierarchy) Standard interface rates are in accordance with International Telecommunications Union (ITU) Recommendation G.707 and Plesiochronous Digital Hierarchy (PDH) rates per ITU Recommendation G.704.
6.2.6.4 BellSouth shall design Dedicated Transport according to its network infrastructure. AmTel BSE shall specify the termination points for Dedicated Transport.
6.2.6.5 At a minimum, Dedicated Transport shall meet each of the requirements set forth in the applicable industry technical references.
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 6.2.6.1 The entire designated transmission service (e.g., DS0, DS1, DS3) shall be dedicated to AmTel Rent-A-Line designated traffic.
6.2.6.2 For DS1 or DS3 circuits, Dedicated Transport shall at a minimum meet the performance, availability, jitter, and delay requirements specified for Customer Interface to Central Office (CI to CO) connections in the applicable industry standards.
6.2.6.3 BellSouth shall offer the following interface transmission rates for Dedicated Transport:
6.2.6.3.1 DS0 Equivalent;
6.2.6.3.2 DS1;
6.2.6.3.3 DS3; and
6.2.6.3.4 SDH (Synchronous Digital Hierarchy) Standard interface rates are in accordance with International Telecommunications Union (ITU) Recommendation G.707 and Plesiochronous Digital Hierarchy (PDH) rates per ITU Recommendation G.704.
6.2.6.4 BellSouth shall design Dedicated Transport according to its network infrastructure. AmTel Rent-A-Line shall specify the termination points for Dedicated Transport.
6.2.6.5 At a minimum, Dedicated Transport shall meet each of the requirements set forth in the applicable industry technical references.
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 6.2.6.1 The entire designated transmission service (e.g., DS0, DS1, DS3) shall be dedicated to AmTel MTS Communications designated traffic.
6.2.6.2 For DS1 or DS3 circuits, Dedicated Transport shall at a minimum meet the performance, availability, jitter, and delay requirements specified for Customer Interface to Central Office (CI to CO) connections in the applicable industry standards.
6.2.6.3 BellSouth shall offer the following interface transmission rates for Dedicated Transport:
6.2.6.3.1 DS0 Equivalent;
6.2.6.3.2 DS1;
6.2.6.3.3 DS3; and
6.2.6.3.4 SDH (Synchronous Digital Hierarchy) Standard interface rates are in accordance with International Telecommunications Union (ITU) Recommendation G.707 and Plesiochronous Digital Hierarchy (PDH) rates per ITU Recommendation G.704.
6.2.6.4 BellSouth shall design Dedicated Transport according to its network infrastructure. AmTel MTS Communications shall specify the termination points for Dedicated Transport.
6.2.6.5 At a minimum, Dedicated Transport shall meet each of the requirements set forth in the applicable industry technical references.
Appears in 1 contract
Sources: Interconnection Agreement