Technical Requirements. 4.3.2.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90. The requirements for Tandem Switching include, but are not limited to the following: 4.3.2.1.1 Tandem Switching shall provide signaling to establish a tandem connection; 4.3.2.1.2 Tandem Switching will provide screening as jointly agreed to by Lightyear and BellSouth; 4.3.2.1.3 Tandem Switching shall provide Advanced Intelligent Network triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability; 4.3.2.1.4 Tandem Switching shall provide access to Toll Free number database; 4.3.2.1.5 Tandem Switching shall provide connectivity to PSAPs where 911 solutions are deployed and the tandem is used for 911; and 4.3.2.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers. 4.3.2.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to Lightyear. 4.3.2.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner. 4.3.2.4 Tandem Switching shall process originating toll-free traffic received from Lightyear’s local switch. 4.3.2.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, to the extent such Tandem Switch has such capability.
Appears in 3 contracts
Sources: Clec Agreement, Clec Agreement, Clec Agreement
Technical Requirements. 4.3.2.1 4.5.3.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90June 1, 1990. The requirements for Tandem Switching include, include but are not limited to the following:
4.3.2.1.1 4.5.3.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 4.5.3.1.2 Tandem Switching will provide screening as jointly agreed to by Lightyear <<customer_short_name>> and BellSouth;
4.3.2.1.3 4.5.3.1.3 Where applicable, Tandem Switching shall provide Advanced Intelligent Network AIN triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 4.5.3.1.4 Where applicable, Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 4.5.3.1.5 Tandem Switching shall provide connectivity to PSAPs Public Safety Answering Point (PSAP)s where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 4.5.3.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 4.5.3.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to Lightyear<<customer_short_name>>.
4.3.2.3 4.5.3.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 4.5.3.4 Tandem Switching shall process originating toll-toll free traffic received from Lightyear<<customer_short_name>>’s local switch.
4.3.2.5 4.5.3.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, Element to the extent such Tandem Switch has such capability.
Appears in 3 contracts
Sources: Telecommunications, Telecommunications, Telecommunications
Technical Requirements. 4.3.2.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90. The requirements for Tandem Switching include, but are not limited to the following:
4.3.2.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 Tandem Switching will provide screening as jointly agreed to by Lightyear Talk America and BellSouth;
4.3.2.1.3 Tandem Switching shall provide Advanced Intelligent Network triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 Tandem Switching shall provide connectivity to PSAPs where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to LightyearTalk America.
4.3.2.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 Tandem Switching shall process originating toll-free traffic received from LightyearTalk America’s local switch.
4.3.2.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, to the extent such Tandem Switch has such capability.
Appears in 3 contracts
Sources: Telecommunications, Bellsouth® / Clec Agreement, Clec Agreement
Technical Requirements. 4.3.2.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90June 1, 1990. The requirements for Tandem Switching include, include but are not limited to the following:
4.3.2.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 Tandem Switching will provide screening as jointly agreed to by Lightyear Southern Telecom and BellSouth;
4.3.2.1.3 Where applicable, Tandem Switching shall provide Advanced Intelligent Network AIN triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 Where applicable, Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 Tandem Switching shall provide connectivity to PSAPs Public Safety Answering Point (PSAP)s where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to LightyearSouthern Telecom.
4.3.2.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 Tandem Switching shall process originating toll-toll free traffic received from LightyearSouthern Telecom’s local switch.
4.3.2.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, Element to the extent such Tandem Switch has such capability.
Appears in 2 contracts
Sources: Interconnection Agreement, Clec Agreement
Technical Requirements. 4.3.2.1 4.5.3.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90June 1, 1990. The requirements for Tandem Switching include, include but are not limited to the following:
4.3.2.1.1 4.5.3.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 4.5.3.1.2 Tandem Switching will provide screening as jointly agreed to by Lightyear MRC and BellSouth;
4.3.2.1.3 4.5.3.1.3 Where applicable, Tandem Switching shall provide Advanced Intelligent Network AIN triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 4.5.3.1.4 Where applicable, Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 4.5.3.1.5 Tandem Switching shall provide connectivity to PSAPs Public Safety Answering Point (PSAP)s where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 4.5.3.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 4.5.3.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to LightyearMRC.
4.3.2.3 4.5.3.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 4.5.3.4 Tandem Switching shall process originating toll-toll free traffic received from LightyearMRC’s local switch.
4.3.2.5 4.5.3.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, Element to the extent such Tandem Switch has such capability.
Appears in 2 contracts
Sources: Interconnection Agreement, Interconnection Agreement
Technical Requirements. 4.3.2.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90. The requirements for Tandem Switching include, include but are not limited to the following:
4.3.2.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 Tandem Switching will provide screening as jointly agreed to by Lightyear Symtelco and BellSouth;
4.3.2.1.3 Tandem Switching shall provide Advanced Intelligent Network triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 Tandem Switching shall provide connectivity to PSAPs where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to LightyearSymtelco.
4.3.2.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 Tandem Switching shall process originating toll-free traffic received from LightyearSymtelco’s local switch.
4.3.2.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, Element to the extent such Tandem Switch has such capability.
Appears in 2 contracts
Sources: Interconnection Agreement, Interconnection Agreement
Technical Requirements. 4.3.2.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90. The requirements for Tandem Switching include, but are not limited to the following:
4.3.2.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 Tandem Switching will provide screening as jointly agreed to by Lightyear Granite and BellSouth;
4.3.2.1.3 Tandem Switching shall provide Advanced Intelligent Network triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 Tandem Switching shall provide connectivity to PSAPs where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to LightyearGranite.
4.3.2.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 Tandem Switching shall process originating toll-free traffic received from LightyearGranite’s local switch.
4.3.2.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, to the extent such Tandem Switch has such capability.
Appears in 2 contracts
Sources: Clec Agreement, Bellsouth® / Clec Agreement
Technical Requirements. 4.3.2.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90. The requirements for Tandem Switching include, but are not limited to the following:
4.3.2.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 Tandem Switching will provide screening as jointly agreed to by Lightyear <<customer_name>> and BellSouth;
4.3.2.1.3 Tandem Switching shall provide Advanced Intelligent Network triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 Tandem Switching shall provide connectivity to PSAPs where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to Lightyear<<customer_name>>.
4.3.2.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 Tandem Switching shall process originating toll-free traffic received from Lightyear<<customer_name>>’s local switch.
4.3.2.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, to the extent such Tandem Switch has such capability.
Appears in 2 contracts
Sources: Interconnection Agreement, Interconnection Agreement
Technical Requirements. 4.3.2.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90. The requirements for Tandem Switching include, include but are not limited to the following:
4.3.2.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 Tandem Switching will provide screening as jointly agreed to by Lightyear CCI and BellSouth;
4.3.2.1.3 Tandem Switching shall provide Advanced Intelligent Network triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 Tandem Switching shall provide connectivity to PSAPs where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to LightyearCCI.
4.3.2.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 Tandem Switching shall process originating toll-free traffic received from LightyearCCI’s local switch.
4.3.2.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, Element to the extent such Tandem Switch has such capability.
Appears in 2 contracts
Sources: Interconnection Agreement, Interconnection Agreement
Technical Requirements. 4.3.2.1 4.5.3.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90June 1, 1990. The requirements for Tandem Switching include, include but are not limited to the following:
4.3.2.1.1 4.5.3.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 4.5.3.1.2 Tandem Switching will provide screening as jointly agreed to by Lightyear <customer_short_name> and BellSouth;
4.3.2.1.3 4.5.3.1.3 Where applicable, Tandem Switching shall provide Advanced Intelligent Network AIN triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 4.5.3.1.4 Where applicable, Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 4.5.3.1.5 Tandem Switching shall provide connectivity to PSAPs Public Safety Answering Point (PSAP)s where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 4.5.3.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 4.5.3.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to Lightyear<customer_short_name>.
4.3.2.3 4.5.3.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 4.5.3.4 Tandem Switching shall process originating toll-toll free traffic received from Lightyear<customer_short_name>’s local switch.
4.3.2.5 4.5.3.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, Element to the extent such Tandem Switch has such capability.
Appears in 2 contracts
Sources: Interconnection Agreement, Interconnection Agreement
Technical Requirements. 4.3.2.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90. The requirements for Tandem Switching include, but are not limited to the following:
4.3.2.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 Tandem Switching will provide screening as jointly agreed to by Lightyear Global Connection and BellSouth;
4.3.2.1.3 Tandem Switching shall provide Advanced Intelligent Network triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 Tandem Switching shall provide connectivity to PSAPs where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to LightyearGlobal Connection.
4.3.2.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 Tandem Switching shall process originating toll-free traffic received from LightyearGlobal Connection’s local switch.
4.3.2.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, to the extent such Tandem Switch has such capability.
Appears in 2 contracts
Sources: Clec Agreement, Clec Agreement
Technical Requirements. 4.3.2.1 4.5.3.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90June 1, 1990. The requirements for Tandem Switching include, include but are not limited to the following:
4.3.2.1.1 4.5.3.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 4.5.3.1.2 Tandem Switching will provide screening as jointly agreed to by Lightyear AFN and BellSouth;
4.3.2.1.3 4.5.3.1.3 Where applicable, Tandem Switching shall provide Advanced Intelligent Network AIN triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 4.5.3.1.4 Where applicable, Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 4.5.3.1.5 Tandem Switching shall provide connectivity to PSAPs Public Safety Answering Point (PSAP)s where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 4.5.3.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 4.5.3.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to LightyearAFN.
4.3.2.3 4.5.3.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 4.5.3.4 Tandem Switching shall process originating toll-toll free traffic received from LightyearAFN’s local switch.
4.3.2.5 4.5.3.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, Element to the extent such Tandem Switch has such capability.
Appears in 2 contracts
Sources: Interconnection Agreement, Interconnection Agreement
Technical Requirements. 4.3.2.1 4.5.3.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90June 1, 1990. The requirements for Tandem Switching include, include but are not limited to the following:
4.3.2.1.1 4.5.3.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 4.5.3.1.2 Tandem Switching will provide screening as jointly agreed to by Lightyear CBX One-Stop and BellSouth;
4.3.2.1.3 4.5.3.1.3 Where applicable, Tandem Switching shall provide Advanced Intelligent Network AIN triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 4.5.3.1.4 Where applicable, Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 4.5.3.1.5 Tandem Switching shall provide connectivity to PSAPs Public Safety Answering Point (PSAP)s where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 4.5.3.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 4.5.3.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to LightyearCBX One-Stop.
4.3.2.3 4.5.3.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 4.5.3.4 Tandem Switching shall process originating toll-toll free traffic received from LightyearCBX One-Stop’s local switch.
4.3.2.5 4.5.3.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, Element to the extent such Tandem Switch has such capability.
Appears in 2 contracts
Sources: Interconnection Agreement, Interconnection Agreement
Technical Requirements. 4.3.2.1 4.5.3.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90June 1, 1990. The requirements for Tandem Switching include, include but are not limited to the following:
4.3.2.1.1 4.5.3.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 4.5.3.1.2 Tandem Switching will provide screening as jointly agreed to by Lightyear ITC^DeltaCom and BellSouth;
4.3.2.1.3 4.5.3.1.3 Where applicable, Tandem Switching shall provide Advanced Intelligent Network AIN triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 4.5.3.1.4 Where applicable, Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 4.5.3.1.5 Tandem Switching shall provide connectivity to PSAPs Public Safety Answering Point (PSAP)s where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 4.5.3.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 4.5.3.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to LightyearITC^DeltaCom.
4.3.2.3 4.5.3.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 4.5.3.4 Tandem Switching shall process originating toll-toll free traffic received from LightyearITC^DeltaCom’s local switch.
4.3.2.5 4.5.3.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, Element to the extent such Tandem Switch has such capability.
Appears in 2 contracts
Sources: Interconnection Agreement, Interconnection Agreement
Technical Requirements. 4.3.2.1 4.5.3.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90June 1, 1990. The requirements for Tandem Switching include, include but are not limited to the following:
4.3.2.1.1 4.5.3.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 4.5.3.1.2 Tandem Switching will provide screening as jointly agreed to by Lightyear PLI and BellSouth;
4.3.2.1.3 4.5.3.1.3 Where applicable, Tandem Switching shall provide Advanced Intelligent Network AIN triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 4.5.3.1.4 Where applicable, Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 4.5.3.1.5 Tandem Switching shall provide connectivity to PSAPs Public Safety Answering Point (PSAP)s where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 4.5.3.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 4.5.3.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to LightyearPLI.
4.3.2.3 4.5.3.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 4.5.3.4 Tandem Switching shall process originating toll-toll free traffic received from LightyearPLI’s local switch.
4.3.2.5 4.5.3.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, Element to the extent such Tandem Switch has such capability.
Appears in 2 contracts
Sources: Interconnection Agreement, Interconnection Agreement
Technical Requirements. 4.3.2.1 4.5.3.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90June 1, 1990. The requirements for Tandem Switching include, include but are not limited to the following:
4.3.2.1.1 4.5.3.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 4.5.3.1.2 Tandem Switching will provide screening as jointly agreed to by Lightyear CCI and BellSouth;
4.3.2.1.3 4.5.3.1.3 Where applicable, Tandem Switching shall provide Advanced Intelligent Network AIN triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 4.5.3.1.4 Where applicable, Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 4.5.3.1.5 Tandem Switching shall provide connectivity to PSAPs Public Safety Answering Point (PSAP)s where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 4.5.3.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 4.5.3.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to LightyearCCI.
4.3.2.3 4.5.3.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 4.5.3.4 Tandem Switching shall process originating toll-toll free traffic received from LightyearCCI’s local switch.
4.3.2.5 4.5.3.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, Element to the extent such Tandem Switch has such capability.
Appears in 2 contracts
Sources: Interconnection Agreement, Interconnection Agreement
Technical Requirements. 4.3.2.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90. The requirements for Tandem Switching include, but are not limited to the following:
4.3.2.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 Tandem Switching will provide screening as jointly agreed to by Lightyear Comm South and BellSouth;
4.3.2.1.3 Tandem Switching shall provide Advanced Intelligent Network triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 Tandem Switching shall provide connectivity to PSAPs where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to LightyearComm South.
4.3.2.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 Tandem Switching shall process originating toll-free traffic received from LightyearComm South’s local switch.
4.3.2.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, to the extent such Tandem Switch has such capability.
Appears in 2 contracts
Sources: Clec Agreement, Clec Agreement
Technical Requirements. 4.3.2.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90June 1, 1990. The requirements for Tandem Switching include, include but are not limited to the following:
4.3.2.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 Tandem Switching will provide screening as jointly agreed to by Lightyear EZ Phone and BellSouth;
4.3.2.1.3 Where applicable, Tandem Switching shall provide Advanced Intelligent Network AIN triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 Where applicable, Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 Tandem Switching shall provide connectivity to PSAPs Public Safety Answering Point (PSAP)s where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to LightyearEZ Phone.
4.3.2.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 Tandem Switching shall process originating toll-toll free traffic received from LightyearEZ Phone’s local switch.
4.3.2.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, Element to the extent such Tandem Switch has such capability.
Appears in 2 contracts
Sources: Clec Agreement, Interconnection Agreement
Technical Requirements. 4.3.2.1 4.5.3.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90June 1, 1990. The requirements for Tandem Switching include, include but are not limited to the following:
4.3.2.1.1 4.5.3.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 4.5.3.1.2 Tandem Switching will provide screening as jointly agreed to by Lightyear GSC and BellSouth;
4.3.2.1.3 4.5.3.1.3 Where applicable, Tandem Switching shall provide Advanced Intelligent Network AIN triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 4.5.3.1.4 Where applicable, Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 4.5.3.1.5 Tandem Switching shall provide connectivity to PSAPs Public Safety Answering Point (PSAP)s where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 4.5.3.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 4.5.3.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to LightyearGSC.
4.3.2.3 4.5.3.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 4.5.3.4 Tandem Switching shall process originating toll-toll free traffic received from LightyearGSC’s local switch.
4.3.2.5 4.5.3.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, Element to the extent such Tandem Switch has such capability.
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 4.3.2.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90. The requirements for Tandem Switching include, include but are not limited to the following:
4.3.2.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 Tandem Switching will provide screening as jointly agreed to by Lightyear Tristar and BellSouth;
4.3.2.1.3 Tandem Switching shall provide Advanced Intelligent Network triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 Tandem Switching shall provide connectivity to PSAPs where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to LightyearTristar.
4.3.2.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 Tandem Switching shall process originating toll-free traffic received from LightyearTristar’s local switch.
4.3.2.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, Element to the extent such Tandem Switch has such capability.
Appears in 1 contract
Sources: Clec Agreement
Technical Requirements. 4.3.2.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90. The requirements for Tandem Switching include, but are not limited to the following:
4.3.2.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 Tandem Switching will provide screening as jointly agreed to by Lightyear Creative Telecom and BellSouth;
4.3.2.1.3 Tandem Switching shall provide Advanced Intelligent Network triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 Tandem Switching shall provide connectivity to PSAPs where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to LightyearCreative Telecom.
4.3.2.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 Tandem Switching shall process originating toll-free traffic received from LightyearCreative Telecom’s local switch.
4.3.2.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, to the extent such Tandem Switch has such capability.
Appears in 1 contract
Sources: Bellsouth® / Clec Agreement
Technical Requirements. 4.3.2.1 4.5.3.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90June 1, 1990. The requirements for Tandem Switching include, include but are not limited to the following:
4.3.2.1.1 4.5.3.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 4.5.3.1.2 Tandem Switching will provide screening as jointly agreed to by Lightyear Nex-Phon and BellSouth;
4.3.2.1.3 4.5.3.1.3 Where applicable, Tandem Switching shall provide Advanced Intelligent Network AIN triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 4.5.3.1.4 Where applicable, Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 4.5.3.1.5 Tandem Switching shall provide connectivity to PSAPs Public Safety Answering Point (PSAP)s where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 4.5.3.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 4.5.3.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to LightyearNex- Phon.
4.3.2.3 4.5.3.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 4.5.3.4 Tandem Switching shall process originating toll-toll free traffic received from LightyearNex- Phon’s local switch.
4.3.2.5 4.5.3.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, Element to the extent such Tandem Switch has such capability.
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 4.3.2.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90. The requirements for Tandem Switching include, but are not limited to the following:
4.3.2.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 Tandem Switching will provide screening as jointly agreed to by Lightyear NAS and BellSouth;
4.3.2.1.3 Tandem Switching shall provide Advanced Intelligent Network triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 Tandem Switching shall provide connectivity to PSAPs where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to LightyearNAS.
4.3.2.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 Tandem Switching shall process originating toll-free traffic received from Lightyear’s NAS’ local switch.
4.3.2.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, to the extent such Tandem Switch has such capability.
Appears in 1 contract
Sources: Clec Agreement
Technical Requirements. 4.3.2.1 4.5.3.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90June 1, 1990. The requirements for Tandem Switching include, include but are not limited to the following:
4.3.2.1.1 4.5.3.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 4.5.3.1.2 Tandem Switching will provide screening as jointly agreed to by Lightyear Telstar Communications and BellSouth;
4.3.2.1.3 4.5.3.1.3 Where applicable, Tandem Switching shall provide Advanced Intelligent Network AIN triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 4.5.3.1.4 Where applicable, Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 4.5.3.1.5 Tandem Switching shall provide connectivity to PSAPs Public Safety Answering Point (PSAP)s where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 4.5.3.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 4.5.3.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to LightyearTelstar Communications.
4.3.2.3 4.5.3.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 4.5.3.4 Tandem Switching shall process originating toll-toll free traffic received from LightyearTelstar Communications’s local switch.
4.3.2.5 4.5.3.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, Element to the extent such Tandem Switch has such capability.
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 4.3.2.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90. The requirements for Tandem Switching include, but are not limited to the following:
4.3.2.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 Tandem Switching will provide screening as jointly agreed to by Lightyear ATI and BellSouth;
4.3.2.1.3 Tandem Switching shall provide Advanced Intelligent Network triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 Tandem Switching shall provide connectivity to PSAPs where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to LightyearATI.
4.3.2.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 Tandem Switching shall process originating toll-free traffic received from LightyearATI’s local switch.
4.3.2.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, to the extent such Tandem Switch has such capability.
Appears in 1 contract
Sources: Clec Agreement
Technical Requirements. 4.3.2.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90. The requirements for Tandem Switching include, include but are not limited to the following:
4.3.2.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 Tandem Switching will provide screening as jointly agreed to by Lightyear Micro-Comm and BellSouth;
4.3.2.1.3 Tandem Switching shall provide Advanced Intelligent Network triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 Tandem Switching shall provide connectivity to PSAPs where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to LightyearMicro- Comm.
4.3.2.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 Tandem Switching shall process originating toll-free traffic received from LightyearMicro- Comm’s local switch.
4.3.2.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, Element to the extent such Tandem Switch has such capability.
Appears in 1 contract
Sources: Clec Agreement
Technical Requirements. 4.3.2.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90June 1, 1990. The requirements for Tandem Switching include, include but are not limited to the following:
4.3.2.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 Tandem Switching will provide screening as jointly agreed to by Lightyear ▇▇▇▇▇▇ and BellSouth▇▇▇▇▇▇▇▇▇;
4.3.2.1.3 Where applicable, Tandem Switching shall provide Advanced Intelligent Network AIN triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 Where applicable, Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 Tandem Switching shall provide connectivity to PSAPs Public Safety Answering Point (PSAP)s where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to LightyearTelson.
4.3.2.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 Tandem Switching shall process originating toll-toll free traffic received from Lightyear’s ▇▇▇▇▇▇’▇ local switch.
4.3.2.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, Element to the extent such Tandem Switch has such capability.
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 4.3.2.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90. The requirements for Tandem Switching include, but are not limited to the following:
4.3.2.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 Tandem Switching will provide screening as jointly agreed to by Lightyear Navigator and BellSouth▇▇▇▇▇▇▇▇▇;
4.3.2.1.3 Tandem Switching shall provide Advanced Intelligent Network triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 Tandem Switching shall provide connectivity to PSAPs where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to LightyearNavigator.
4.3.2.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 Tandem Switching shall process originating toll-free traffic received from LightyearNavigator’s local switch.
4.3.2.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, to the extent such Tandem Switch has such capability.
Appears in 1 contract
Sources: Telecommunications
Technical Requirements. 4.3.2.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90. The requirements for Tandem Switching include, include but are not limited to the following:
4.3.2.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 Tandem Switching will provide screening as jointly agreed to by Lightyear DTM and BellSouth;
4.3.2.1.3 Tandem Switching shall provide Advanced Intelligent Network triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 Tandem Switching shall provide connectivity to PSAPs where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to LightyearDTM.
4.3.2.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 Tandem Switching shall process originating toll-free traffic received from LightyearDTM’s local switch.
4.3.2.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, Element to the extent such Tandem Switch has such capability.
Appears in 1 contract
Sources: Bellsouth® / Clec Agreement
Technical Requirements. 4.3.2.1 4.5.3.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90June 1, 1990. The requirements for Tandem Switching include, include but are not limited to the following:
4.3.2.1.1 4.5.3.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 4.5.3.1.2 Tandem Switching will provide screening as jointly agreed to by Lightyear Think 12 and BellSouth;
4.3.2.1.3 4.5.3.1.3 Where applicable, Tandem Switching shall provide Advanced Intelligent Network AIN triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 4.5.3.1.4 Where applicable, Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 4.5.3.1.5 Tandem Switching shall provide connectivity to PSAPs Public Safety Answering Point (PSAP)s where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 4.5.3.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 4.5.3.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to LightyearThink 12.
4.3.2.3 4.5.3.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 4.5.3.4 Tandem Switching shall process originating toll-toll free traffic received from LightyearThink 12’s local switch.
4.3.2.5 4.5.3.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, Element to the extent such Tandem Switch has such capability.
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 4.3.2.1 4.5.3.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90June 1, 1990. The requirements for Tandem Switching include, include but are not limited to the following:
4.3.2.1.1 4.5.3.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 4.5.3.1.2 Tandem Switching will provide screening as jointly agreed to by Lightyear FPB and BellSouth;
4.3.2.1.3 4.5.3.1.3 Where applicable, Tandem Switching shall provide Advanced Intelligent Network AIN triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 4.5.3.1.4 Where applicable, Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 4.5.3.1.5 Tandem Switching shall provide connectivity to PSAPs Public Safety Answering Point (PSAP)s where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 4.5.3.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 4.5.3.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to LightyearFPB.
4.3.2.3 4.5.3.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 4.5.3.4 Tandem Switching shall process originating toll-toll free traffic received from LightyearFPB’s local switch.
4.3.2.5 4.5.3.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, Element to the extent such Tandem Switch has such capability.
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 4.3.2.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90. The requirements for Tandem Switching include, but are not limited to the following:
4.3.2.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 Tandem Switching will provide screening as jointly agreed to by Lightyear Rent-A-Line and BellSouth;
4.3.2.1.3 Tandem Switching shall provide Advanced Intelligent Network triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 Tandem Switching shall provide connectivity to PSAPs where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to LightyearRent- A-Line.
4.3.2.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 Tandem Switching shall process originating toll-free traffic received from LightyearRent-A- Line’s local switch.
4.3.2.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, to the extent such Tandem Switch has such capability.
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 4.3.2.1 4.5.3.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90June 1, 1990. The requirements for Tandem Switching include, include but are not limited to the following:
4.3.2.1.1 4.5.3.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 4.5.3.1.2 Tandem Switching will provide screening as jointly agreed to by Lightyear Preferred and BellSouth;
4.3.2.1.3 4.5.3.1.3 Where applicable, Tandem Switching shall provide Advanced Intelligent Network AIN triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 4.5.3.1.4 Where applicable, Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 4.5.3.1.5 Tandem Switching shall provide connectivity to PSAPs Public Safety Answering Point (PSAP)s where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 4.5.3.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 4.5.3.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to LightyearPreferred.
4.3.2.3 4.5.3.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 4.5.3.4 Tandem Switching shall process originating toll-toll free traffic received from LightyearPreferred’s local switch.
4.3.2.5 4.5.3.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, Element to the extent such Tandem Switch has such capability.
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 4.3.2.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90. The requirements for Tandem Switching include, but are not limited to the following:
4.3.2.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 Tandem Switching will provide screening as jointly agreed to by Lightyear Tel West and BellSouth;
4.3.2.1.3 Tandem Switching shall provide Advanced Intelligent Network triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 Tandem Switching shall provide connectivity to PSAPs where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to LightyearTel West.
4.3.2.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 Tandem Switching shall process originating toll-free traffic received from LightyearTel West’s local switch.
4.3.2.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, to the extent such Tandem Switch has such capability.
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 4.3.2.1 4.5.3.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90June 1, 1990. The requirements for Tandem Switching include, include but are not limited to the following:
4.3.2.1.1 4.5.3.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 4.5.3.1.2 Tandem Switching will provide screening as jointly agreed to by Lightyear Seven ▇▇▇▇▇▇▇ and BellSouth▇▇▇▇▇▇▇▇▇;
4.3.2.1.3 4.5.3.1.3 Where applicable, Tandem Switching shall provide Advanced Intelligent Network AIN triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 4.5.3.1.4 Where applicable, Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 4.5.3.1.5 Tandem Switching shall provide connectivity to PSAPs Public Safety Answering Point (PSAP)s where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 4.5.3.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 4.5.3.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to LightyearSeven Bridges.
4.3.2.3 4.5.3.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 4.5.3.4 Tandem Switching shall process originating toll-toll free traffic received from LightyearSeven Bridges’s local switch.
4.3.2.5 4.5.3.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, Element to the extent such Tandem Switch has such capability.
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 4.3.2.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90. The requirements for Tandem Switching include, include but are not limited to the following:
4.3.2.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 Tandem Switching will provide screening as jointly agreed to by Lightyear ▇▇▇▇ Communications and BellSouth;
4.3.2.1.3 Tandem Switching shall provide Advanced Intelligent Network triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 Tandem Switching shall provide connectivity to PSAPs where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to Lightyear▇▇▇▇ Communications.
4.3.2.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 Tandem Switching shall process originating toll-free traffic received from Lightyear▇▇▇▇ Communications’s local switch.
4.3.2.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, Element to the extent such Tandem Switch has such capability.
Appears in 1 contract
Sources: Clec Agreement
Technical Requirements. 4.3.2.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90. The requirements for Tandem Switching include, include but are not limited to the following:
4.3.2.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 Tandem Switching will provide screening as jointly agreed to by Lightyear Dialogica and BellSouth▇▇▇▇▇▇▇▇▇;
4.3.2.1.3 Tandem Switching shall provide Advanced Intelligent Network triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 Tandem Switching shall provide connectivity to PSAPs where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to LightyearDialogica.
4.3.2.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 Tandem Switching shall process originating toll-free traffic received from LightyearDialogica’s local switch.
4.3.2.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, Element to the extent such Tandem Switch has such capability.
Appears in 1 contract
Sources: Clec Agreement
Technical Requirements. 4.3.2.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90. The requirements for Tandem Switching include, include but are not limited to the following:
4.3.2.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 Tandem Switching will provide screening as jointly agreed to by Lightyear ABC Telcom and BellSouth;
4.3.2.1.3 Tandem Switching shall provide Advanced Intelligent Network triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 Tandem Switching shall provide connectivity to PSAPs where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to LightyearABC Telcom.
4.3.2.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 Tandem Switching shall process originating toll-free traffic received from LightyearABC Telcom’s local switch.
4.3.2.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, Element to the extent such Tandem Switch has such capability.
Appears in 1 contract
Sources: Clec Agreement
Technical Requirements. 4.3.2.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90June 1, 1990. The requirements for Tandem Switching include, include but are not limited to the following:
4.3.2.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 Tandem Switching will provide screening as jointly agreed to by Lightyear AmTel and BellSouth▇▇▇▇▇▇▇▇▇;
4.3.2.1.3 Where applicable, Tandem Switching shall provide Advanced Intelligent Network AIN triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 Where applicable, Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 Tandem Switching shall provide connectivity to PSAPs Public Safety Answering Point (PSAP)s where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to LightyearAmTel.
4.3.2.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 Tandem Switching shall process originating toll-toll free traffic received from LightyearAmTel’s local switch.
4.3.2.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, Element to the extent such Tandem Switch has such capability.
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 4.3.2.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90. The requirements for Tandem Switching include, but are not limited to the following:
4.3.2.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 Tandem Switching will provide screening as jointly agreed to by Lightyear VarTec and BellSouth▇▇▇▇▇▇▇▇▇;
4.3.2.1.3 Tandem Switching shall provide Advanced Intelligent Network triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 Tandem Switching shall provide connectivity to PSAPs where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to LightyearVarTec.
4.3.2.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 Tandem Switching shall process originating toll-free traffic received from LightyearVarTec’s local switch.
4.3.2.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, to the extent such Tandem Switch has such capability.
Appears in 1 contract
Sources: Telecommunications
Technical Requirements. 4.3.2.1 4.5.3.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90June 1, 1990. The requirements for Tandem Switching include, include but are not limited to the following:
4.3.2.1.1 4.5.3.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 4.5.3.1.2 Tandem Switching will provide screening as jointly agreed to by Lightyear Home Telecom and BellSouth;
4.3.2.1.3 4.5.3.1.3 Where applicable, Tandem Switching shall provide Advanced Intelligent Network AIN triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 4.5.3.1.4 Where applicable, Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 4.5.3.1.5 Tandem Switching shall provide connectivity to PSAPs Public Safety Answering Point (PSAP)s where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 4.5.3.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 4.5.3.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to LightyearHome Telecom.
4.3.2.3 4.5.3.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 4.5.3.4 Tandem Switching shall process originating toll-toll free traffic received from LightyearHome Telecom’s local switch.
4.3.2.5 4.5.3.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, Element to the extent such Tandem Switch has such capability.
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 4.3.2.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90. The requirements for Tandem Switching include, but are not limited to the following:
4.3.2.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 Tandem Switching will provide screening as jointly agreed to by Lightyear ▇▇▇▇▇▇▇.▇▇▇ and BellSouth;
4.3.2.1.3 Tandem Switching shall provide Advanced Intelligent Network triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 Tandem Switching shall provide connectivity to PSAPs where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to Lightyear▇▇▇▇▇▇▇.▇▇▇.
4.3.2.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 Tandem Switching shall process originating toll-free traffic received from Lightyear▇▇▇▇▇▇▇.▇▇▇’s local switch.
4.3.2.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, to the extent such Tandem Switch has such capability.
Appears in 1 contract
Sources: Clec Agreement
Technical Requirements. 4.3.2.1 4.5.3.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90June 1, 1990. The requirements for Tandem Switching include, include but are not limited to the following:
4.3.2.1.1 4.5.3.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 4.5.3.1.2 Tandem Switching will provide screening as jointly agreed to by Lightyear Aero and BellSouth;
4.3.2.1.3 4.5.3.1.3 Where applicable, Tandem Switching shall provide Advanced Intelligent Network AIN triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 4.5.3.1.4 Where applicable, Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 4.5.3.1.5 Tandem Switching shall provide connectivity to PSAPs Public Safety Answering Point (PSAP)s where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 4.5.3.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 4.5.3.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to LightyearAero.
4.3.2.3 4.5.3.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 4.5.3.4 Tandem Switching shall process originating toll-toll free traffic received from LightyearAero’s local switch.
4.3.2.5 4.5.3.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, Element to the extent such Tandem Switch has such capability.
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 4.3.2.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90. The requirements for Tandem Switching include, but are not limited to the following:
4.3.2.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 Tandem Switching will provide screening as jointly agreed to by Lightyear FTS and BellSouth;
4.3.2.1.3 Tandem Switching shall provide Advanced Intelligent Network triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 Tandem Switching shall provide connectivity to PSAPs where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to LightyearFTS.
4.3.2.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 Tandem Switching shall process originating toll-free traffic received from LightyearFTS’s local switch.
4.3.2.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, to the extent such Tandem Switch has such capability.
Appears in 1 contract
Sources: Bellsouth® / Clec Agreement
Technical Requirements. 4.3.2.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90. The requirements for Tandem Switching include, include but are not limited to the following:
4.3.2.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 Tandem Switching will provide screening as jointly agreed to by Lightyear NOW and BellSouth;
4.3.2.1.3 Tandem Switching shall provide Advanced Intelligent Network triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 Tandem Switching shall provide connectivity to PSAPs where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to LightyearNOW.
4.3.2.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 Tandem Switching shall process originating toll-free traffic received from LightyearNOW’s local switch.
4.3.2.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, Element to the extent such Tandem Switch has such capability.
Appears in 1 contract
Sources: Clec Agreement
Technical Requirements. 4.3.2.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90. The requirements for Tandem Switching include, include but are not limited to the following:
4.3.2.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 Tandem Switching will provide screening as jointly agreed to by Lightyear ▇▇▇▇▇▇ and BellSouth▇▇▇▇▇▇▇▇▇;
4.3.2.1.3 Tandem Switching shall provide Advanced Intelligent Network triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 Tandem Switching shall provide connectivity to PSAPs where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to LightyearEPICUS.
4.3.2.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 Tandem Switching shall process originating toll-free traffic received from Lightyear’s EPICUS’ local switch.
4.3.2.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, Element to the extent such Tandem Switch has such capability.
Appears in 1 contract
Sources: Clec Agreement
Technical Requirements. 4.3.2.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90. The requirements for Tandem Switching include, but are not limited to the following:
4.3.2.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 Tandem Switching will provide screening as jointly agreed to by Lightyear e-Tel and BellSouth;
4.3.2.1.3 Tandem Switching shall provide Advanced Intelligent Network triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 Tandem Switching shall provide connectivity to PSAPs where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to Lightyeare-Tel.
4.3.2.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 Tandem Switching shall process originating toll-free traffic received from Lightyeare-Tel’s local switch.
4.3.2.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, to the extent such Tandem Switch has such capability.
Appears in 1 contract
Sources: Clec Agreement
Technical Requirements. 4.3.2.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90. The requirements for Tandem Switching include, but are not limited to the following:
4.3.2.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 Tandem Switching will provide screening as jointly agreed to by Lightyear Global Connection and BellSouth▇▇▇▇▇▇▇▇▇;
4.3.2.1.3 Tandem Switching shall provide Advanced Intelligent Network triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 Tandem Switching shall provide connectivity to PSAPs where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to LightyearGlobal Connection.
4.3.2.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 Tandem Switching shall process originating toll-free traffic received from LightyearGlobal Connection’s local switch.
4.3.2.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, to the extent such Tandem Switch has such capability.
Appears in 1 contract
Sources: Clec Agreement
Technical Requirements. 4.3.2.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90. The requirements for Tandem Switching include, include but are not limited to the following:
4.3.2.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 Tandem Switching will provide screening as jointly agreed to by Lightyear BSE and BellSouth;
4.3.2.1.3 Tandem Switching shall provide Advanced Intelligent Network triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 Tandem Switching shall provide connectivity to PSAPs where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to LightyearBSE.
4.3.2.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 Tandem Switching shall process originating toll-free traffic received from LightyearBSE’s local switch.
4.3.2.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, Element to the extent such Tandem Switch has such capability.
Appears in 1 contract
Sources: Clec Agreement
Technical Requirements. 4.3.2.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90. The requirements for Tandem Switching include, but are not limited to the following:
4.3.2.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 Tandem Switching will provide screening as jointly agreed to by Lightyear Delta Phones and BellSouth;
4.3.2.1.3 Tandem Switching shall provide Advanced Intelligent Network triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 Tandem Switching shall provide connectivity to PSAPs where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to LightyearDelta Phones.
4.3.2.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 Tandem Switching shall process originating toll-free traffic received from LightyearDelta Phones’s local switch.
4.3.2.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, to the extent such Tandem Switch has such capability.
Appears in 1 contract
Sources: Clec Agreement
Technical Requirements. 4.3.2.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90. The requirements for Tandem Switching include, but are not limited to the following:
4.3.2.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 Tandem Switching will provide screening as jointly agreed to by Lightyear AirCover Network Solutions, Inc. and BellSouth;
4.3.2.1.3 Tandem Switching shall provide Advanced Intelligent Network triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 Tandem Switching shall provide connectivity to PSAPs where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to Lightyear.AirCover Network Solutions, Inc..
4.3.2.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 Tandem Switching shall process originating toll-free traffic received from LightyearAirCover Network Solutions, Inc.’s local switch.
4.3.2.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, to the extent such Tandem Switch has such capability.
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 4.3.2.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90. The requirements for Tandem Switching include, include but are not limited to the following:
4.3.2.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 Tandem Switching will provide screening as jointly agreed to by Lightyear GulfPines and BellSouth;
4.3.2.1.3 Tandem Switching shall provide Advanced Intelligent Network triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 Tandem Switching shall provide connectivity to PSAPs where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to LightyearGulfPines.
4.3.2.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 Tandem Switching shall process originating toll-free traffic received from Lightyear’s GulfPines’ local switch.
4.3.2.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, Element to the extent such Tandem Switch has such capability.
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 4.3.2.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90. The requirements for Tandem Switching include, include but are not limited to the following:
4.3.2.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 Tandem Switching will provide screening as jointly agreed to by Lightyear Preferred and BellSouth;
4.3.2.1.3 Tandem Switching shall provide Advanced Intelligent Network triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 Tandem Switching shall provide connectivity to PSAPs where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to LightyearPreferred.
4.3.2.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 Tandem Switching shall process originating toll-free traffic received from LightyearPreferred’s local switch.
4.3.2.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, Element to the extent such Tandem Switch has such capability.
Appears in 1 contract
Sources: Clec Agreement
Technical Requirements. 4.3.2.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90. The requirements for Tandem Switching include, include but are not limited to the following:
4.3.2.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 Tandem Switching will provide screening as jointly agreed to by Lightyear FPB and BellSouth;
4.3.2.1.3 Tandem Switching shall provide Advanced Intelligent Network triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 Tandem Switching shall provide connectivity to PSAPs where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to LightyearFPB.
4.3.2.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 Tandem Switching shall process originating toll-free traffic received from LightyearFPB’s local switch.
4.3.2.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, Element to the extent such Tandem Switch has such capability.
Appears in 1 contract
Sources: Clec Agreement
Technical Requirements. 4.3.2.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90. The requirements for Tandem Switching include, include but are not limited to the following:
4.3.2.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 Tandem Switching will provide screening as jointly agreed to by Lightyear DSL and BellSouth;
4.3.2.1.3 Tandem Switching shall provide Advanced Intelligent Network triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 Tandem Switching shall provide connectivity to PSAPs where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to LightyearDSL.
4.3.2.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 Tandem Switching shall process originating toll-free traffic received from LightyearDSL’s local switch.
4.3.2.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, Element to the extent such Tandem Switch has such capability.
Appears in 1 contract
Sources: Clec Agreement
Technical Requirements. 4.3.2.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90. The requirements for Tandem Switching include, include but are not limited to the following:
4.3.2.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 Tandem Switching will provide screening as jointly agreed to by Lightyear DPI and BellSouth;
4.3.2.1.3 Tandem Switching shall provide Advanced Intelligent Network triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 Tandem Switching shall provide connectivity to PSAPs where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to LightyearDPI.
4.3.2.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 Tandem Switching shall process originating toll-free traffic received from LightyearDPI’s local switch.
4.3.2.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, Element to the extent such Tandem Switch has such capability.
Appears in 1 contract
Sources: Clec Agreement
Technical Requirements. 4.3.2.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90. The requirements for Tandem Switching include, but are not limited to the following:
4.3.2.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 Tandem Switching will provide screening as jointly agreed to by Lightyear IDS Telcom and BellSouth;
4.3.2.1.3 Tandem Switching shall provide Advanced Intelligent Network triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 Tandem Switching shall provide connectivity to PSAPs where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to LightyearIDS Telcom.
4.3.2.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 Tandem Switching shall process originating toll-free traffic received from LightyearIDS Telcom’s local switch.
4.3.2.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, to the extent such Tandem Switch has such capability.
Appears in 1 contract
Sources: Clec Agreement
Technical Requirements. 4.3.2.1 4.5.3.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90June 1, 1990. The requirements for Tandem Switching include, include but are not limited to the following:
4.3.2.1.1 4.5.3.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 4.5.3.1.2 Tandem Switching will provide screening as jointly agreed to by Lightyear BTI and BellSouth;
4.3.2.1.3 4.5.3.1.3 Where applicable, Tandem Switching shall provide Advanced Intelligent Network AIN triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 4.5.3.1.4 Where applicable, Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 4.5.3.1.5 Tandem Switching shall provide connectivity to PSAPs Public Safety Answering Point (PSAP)s where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 4.5.3.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 4.5.3.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to LightyearBTI.
4.3.2.3 4.5.3.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 4.5.3.4 Tandem Switching shall process originating toll-toll free traffic received from LightyearBTI’s local switch.
4.3.2.5 4.5.3.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, Element to the extent such Tandem Switch has such capability.
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 4.3.2.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90. The requirements for Tandem Switching include, include but are not limited to the following:
4.3.2.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 Tandem Switching will provide screening as jointly agreed to by Lightyear Northeast and BellSouth;
4.3.2.1.3 Tandem Switching shall provide Advanced Intelligent Network triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 Tandem Switching shall provide connectivity to PSAPs where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to LightyearNortheast.
4.3.2.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 Tandem Switching shall process originating toll-free traffic received from LightyearNortheast’s local switch.
4.3.2.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, Element to the extent such Tandem Switch has such capability.
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 4.3.2.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90. The requirements for Tandem Switching include, but are not limited to the following:
4.3.2.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 Tandem Switching will provide screening as jointly agreed to by Lightyear GulfPines and BellSouth;
4.3.2.1.3 Tandem Switching shall provide Advanced Intelligent Network triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 Tandem Switching shall provide connectivity to PSAPs where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to LightyearGulfPines.
4.3.2.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 Tandem Switching shall process originating toll-free traffic received from Lightyear’s GulfPines’ local switch.
4.3.2.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, to the extent such Tandem Switch has such capability.
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 4.3.2.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90June 1, 1990. The requirements for Tandem Switching include, include but are not limited to the following:
4.3.2.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 Tandem Switching will provide screening as jointly agreed to by Lightyear TWTC and BellSouth;
4.3.2.1.3 Where applicable, Tandem Switching shall provide Advanced Intelligent Network AIN triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 Where applicable, Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 Tandem Switching shall provide connectivity to PSAPs Public Safety Answering Point (PSAP)s where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to LightyearTWTC.
4.3.2.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 Tandem Switching shall process originating toll-toll free traffic received from LightyearTWTC’s local switch.
4.3.2.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, Element to the extent such Tandem Switch has such capability.
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 4.3.2.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90. The requirements for Tandem Switching include, but are not limited to the following:
4.3.2.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 Tandem Switching will provide screening as jointly agreed to by Lightyear ▇▇▇.▇▇▇ and BellSouth▇▇▇▇▇▇▇▇▇;
4.3.2.1.3 Tandem Switching shall provide Advanced Intelligent Network triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 Tandem Switching shall provide connectivity to PSAPs where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to Lightyear▇▇▇.▇▇▇.
4.3.2.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 Tandem Switching shall process originating toll-free traffic received from Lightyear▇▇▇.▇▇▇’s local switch.
4.3.2.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, to the extent such Tandem Switch has such capability.
Appears in 1 contract
Sources: Clec Agreement
Technical Requirements. 4.3.2.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90. The requirements for Tandem Switching include, but are not limited to the following:
4.3.2.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 Tandem Switching will provide screening as jointly agreed to by Lightyear FLATEL and BellSouth;
4.3.2.1.3 Tandem Switching shall provide Advanced Intelligent Network triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 Tandem Switching shall provide connectivity to PSAPs where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to LightyearFLATEL.
4.3.2.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 Tandem Switching shall process originating toll-free traffic received from LightyearFLATEL’s local switch.
4.3.2.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, to the extent such Tandem Switch has such capability.
Appears in 1 contract
Sources: Clec Agreement
Technical Requirements. 4.3.2.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90June 1, 1990. The requirements for Tandem Switching include, include but are not limited to the following:
4.3.2.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 Tandem Switching will provide screening as jointly agreed to by Lightyear AmeriMex and BellSouth▇▇▇▇▇▇▇▇▇;
4.3.2.1.3 Where applicable, Tandem Switching shall provide Advanced Intelligent Network AIN triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 Where applicable, Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 Tandem Switching shall provide connectivity to PSAPs Public Safety Answering Point (PSAP)s where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to LightyearAmeriMex.
4.3.2.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 Tandem Switching shall process originating toll-toll free traffic received from LightyearAmeriMex’s local switch.
4.3.2.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, Element to the extent such Tandem Switch has such capability.
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 4.3.2.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90. The requirements for Tandem Switching include, but are not limited to the following:
4.3.2.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 Tandem Switching will provide screening as jointly agreed to by Lightyear NTBS and BellSouth;
4.3.2.1.3 Tandem Switching shall provide Advanced Intelligent Network triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 Tandem Switching shall provide connectivity to PSAPs where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to LightyearNTBS.
4.3.2.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 Tandem Switching shall process originating toll-free traffic received from LightyearNTBS’s local switch.
4.3.2.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, to the extent such Tandem Switch has such capability.
Appears in 1 contract
Sources: Clec Agreement
Technical Requirements. 4.3.2.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90June 1, 1990. The requirements for Tandem Switching include, include but are not limited to the following:: AMENDMENT EXHIBIT 1
4.3.2.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 Tandem Switching will provide screening as jointly agreed to by Lightyear BroadRiver and BellSouth;
4.3.2.1.3 Where applicable, Tandem Switching shall provide Advanced Intelligent Network AIN triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 Where applicable, Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 Tandem Switching shall provide connectivity to PSAPs Public Safety Answering Point (PSAP)s where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to LightyearBroadRiver.
4.3.2.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 Tandem Switching shall process originating toll-toll free traffic received from LightyearBroadRiver’s local switch.
4.3.2.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, Element to the extent such Tandem Switch has such capability.
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 4.3.2.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90. The requirements for Tandem Switching include, but are not limited to the following:
4.3.2.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 Tandem Switching will provide screening as jointly agreed to by Lightyear Columbus Local and BellSouth;
4.3.2.1.3 Tandem Switching shall provide Advanced Intelligent Network triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 Tandem Switching shall provide connectivity to PSAPs where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to LightyearColumbus Local.
4.3.2.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 Tandem Switching shall process originating toll-free traffic received from LightyearColumbus Local’s local switch.
4.3.2.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, to the extent such Tandem Switch has such capability.
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 4.3.2.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90. The requirements for Tandem Switching include, include but are not limited to the following:
4.3.2.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 Tandem Switching will provide screening as jointly agreed to by Lightyear Speedy Reconnect and BellSouth;
4.3.2.1.3 Tandem Switching shall provide Advanced Intelligent Network triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 Tandem Switching shall provide connectivity to PSAPs where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to LightyearSpeedy Reconnect.
4.3.2.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 Tandem Switching shall process originating toll-free traffic received from LightyearSpeedy Reconnect’s local switch.
4.3.2.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, Element to the extent such Tandem Switch has such capability.
Appears in 1 contract
Sources: Bellsouth® / Clec Agreement
Technical Requirements. 4.3.2.1 4.5.3.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90June 1, 1990. The requirements for Tandem Switching include, include but are not limited to the following:
4.3.2.1.1 4.5.3.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 4.5.3.1.2 Tandem Switching will provide screening as jointly agreed to by Lightyear Grande and BellSouth;
4.3.2.1.3 4.5.3.1.3 Where applicable, Tandem Switching shall provide Advanced Intelligent Network AIN triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 4.5.3.1.4 Where applicable, Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 4.5.3.1.5 Tandem Switching shall provide connectivity to PSAPs Public Safety Answering Point (PSAP)s where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 4.5.3.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 4.5.3.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to LightyearGrande.
4.3.2.3 4.5.3.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 4.5.3.4 Tandem Switching shall process originating toll-toll free traffic received from LightyearGrande’s local switch.
4.3.2.5 4.5.3.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, Element to the extent such Tandem Switch has such capability.
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 4.3.2.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90. The requirements for Tandem Switching include, but are not limited to the following:
4.3.2.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 Tandem Switching will provide screening as jointly agreed to by Lightyear C.M. and BellSouth;
4.3.2.1.3 Tandem Switching shall provide Advanced Intelligent Network triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 Tandem Switching shall provide connectivity to PSAPs where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to Lightyear.C.M..
4.3.2.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 Tandem Switching shall process originating toll-free traffic received from LightyearC.M.’s local switch.
4.3.2.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, to the extent such Tandem Switch has such capability.
Appears in 1 contract
Sources: Clec Agreement
Technical Requirements. 4.3.2.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90. The requirements for Tandem Switching include, but are not limited to the following:
4.3.2.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 Tandem Switching will provide screening as jointly agreed to by Lightyear Money To Go and BellSouth;
4.3.2.1.3 Tandem Switching shall provide Advanced Intelligent Network triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 Tandem Switching shall provide connectivity to PSAPs where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to LightyearMoney To Go.
4.3.2.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 Tandem Switching shall process originating toll-free traffic received from LightyearMoney To Go’s local switch.
4.3.2.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, to the extent such Tandem Switch has such capability.
Appears in 1 contract
Sources: Clec Agreement
Technical Requirements. 4.3.2.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90. The requirements for Tandem Switching include, but are not limited to the following:
4.3.2.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 Tandem Switching will provide screening as jointly agreed to by Lightyear Actel and BellSouth▇▇▇▇▇▇▇▇▇;
4.3.2.1.3 Tandem Switching shall provide Advanced Intelligent Network triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 Tandem Switching shall provide connectivity to PSAPs where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to LightyearActel.
4.3.2.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 Tandem Switching shall process originating toll-free traffic received from LightyearActel’s local switch.
4.3.2.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, to the extent such Tandem Switch has such capability.
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 4.3.2.1 4.5.3.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90June 1, 1990. The requirements for Tandem Switching include, include but are not limited to the following:
4.3.2.1.1 4.5.3.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 4.5.3.1.2 Tandem Switching will provide screening as jointly agreed to by Lightyear Global Dialtone and BellSouth;
4.3.2.1.3 4.5.3.1.3 Where applicable, Tandem Switching shall provide Advanced Intelligent Network AIN triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 4.5.3.1.4 Where applicable, Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 4.5.3.1.5 Tandem Switching shall provide connectivity to PSAPs Public Safety Answering Point (PSAP)s where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 4.5.3.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 4.5.3.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to LightyearGlobal Dialtone.
4.3.2.3 4.5.3.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 4.5.3.4 Tandem Switching shall process originating toll-toll free traffic received from LightyearGlobal Dialtone’s local switch.
4.3.2.5 4.5.3.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, Element to the extent such Tandem Switch has such capability.
Appears in 1 contract
Sources: Clec Agreement
Technical Requirements. 4.3.2.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90. The requirements for Tandem Switching include, but are not limited to the following:
4.3.2.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 Tandem Switching will provide screening as jointly agreed to by Lightyear World Access and BellSouth▇▇▇▇▇▇▇▇▇;
4.3.2.1.3 Tandem Switching shall provide Advanced Intelligent Network triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 Tandem Switching shall provide connectivity to PSAPs where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to LightyearWorld Access.
4.3.2.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 Tandem Switching shall process originating toll-free traffic received from LightyearWorld Access’s local switch.
4.3.2.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, to the extent such Tandem Switch has such capability.
Appears in 1 contract
Sources: Clec Agreement
Technical Requirements. 4.3.2.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90. The requirements for Tandem Switching include, but are not limited to the following:
4.3.2.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 Tandem Switching will provide screening as jointly agreed to by Lightyear Oronoco and BellSouth▇▇▇▇▇▇▇▇▇;
4.3.2.1.3 Tandem Switching shall provide Advanced Intelligent Network triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 Tandem Switching shall provide connectivity to PSAPs where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to LightyearOronoco.
4.3.2.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 Tandem Switching shall process originating toll-free traffic received from LightyearOronoco’s local switch.
4.3.2.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, to the extent such Tandem Switch has such capability.
Appears in 1 contract
Sources: Clec Agreement
Technical Requirements. 4.3.2.1 4.5.3.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90June 1, 1990. The requirements for Tandem Switching include, include but are not limited to the following:
4.3.2.1.1 4.5.3.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 4.5.3.1.2 Tandem Switching will provide screening as jointly agreed to by Lightyear Starlink and BellSouth;
4.3.2.1.3 4.5.3.1.3 Where applicable, Tandem Switching shall provide Advanced Intelligent Network AIN triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 4.5.3.1.4 Where applicable, Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 4.5.3.1.5 Tandem Switching shall provide connectivity to PSAPs Public Safety Answering Point (PSAP)s where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 4.5.3.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 4.5.3.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to LightyearStarlink.
4.3.2.3 4.5.3.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 4.5.3.4 Tandem Switching shall process originating toll-toll free traffic received from LightyearStarlink’s local switch.
4.3.2.5 4.5.3.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, Element to the extent such Tandem Switch has such capability.
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 4.3.2.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90. The requirements for Tandem Switching include, include but are not limited to the following:
4.3.2.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 Tandem Switching will provide screening as jointly agreed to by Lightyear PLI and BellSouth;
4.3.2.1.3 Tandem Switching shall provide Advanced Intelligent Network triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 Tandem Switching shall provide connectivity to PSAPs where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to LightyearPLI.
4.3.2.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 Tandem Switching shall process originating toll-free traffic received from LightyearPLI’s local switch.
4.3.2.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, Element to the extent such Tandem Switch has such capability.
Appears in 1 contract
Sources: Clec Agreement
Technical Requirements. 4.3.2.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90. The requirements for Tandem Switching include, include but are not limited to the following:
4.3.2.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 Tandem Switching will provide screening as jointly agreed to by Lightyear Globe and BellSouth;
4.3.2.1.3 Tandem Switching shall provide Advanced Intelligent Network triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 Tandem Switching shall provide connectivity to PSAPs where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to LightyearGlobe.
4.3.2.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 Tandem Switching shall process originating toll-free traffic received from LightyearGlobe’s local switch.
4.3.2.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, Element to the extent such Tandem Switch has such capability.
Appears in 1 contract
Sources: Clec Agreement
Technical Requirements. 4.3.2.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90. The requirements for Tandem Switching include, include but are not limited to the following:
4.3.2.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 Tandem Switching will provide screening as jointly agreed to by Lightyear US LEC and BellSouth;
4.3.2.1.3 Tandem Switching shall provide Advanced Intelligent Network triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 Tandem Switching shall provide connectivity to PSAPs where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to LightyearUS LEC.
4.3.2.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 Tandem Switching shall process originating toll-free traffic received from LightyearUS LEC’s local switch.
4.3.2.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, Element to the extent such Tandem Switch has such capability.
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 4.3.2.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90June 1, 1990. The requirements for Tandem Switching include, include but are not limited to the following:
4.3.2.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 Tandem Switching will provide screening as jointly agreed to by Lightyear Metro Teleconnect and BellSouth;
4.3.2.1.3 Where applicable, Tandem Switching shall provide Advanced Intelligent Network AIN triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 Where applicable, Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 Tandem Switching shall provide connectivity to PSAPs Public Safety Answering Point (PSAP)s where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to LightyearMetro Teleconnect.
4.3.2.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 Tandem Switching shall process originating toll-toll free traffic received from LightyearMetro Teleconnect’s local switch.
4.3.2.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, Element to the extent such Tandem Switch has such capability.
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 4.3.2.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90. The requirements for Tandem Switching include, but are not limited to the following:
4.3.2.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 Tandem Switching will provide screening as jointly agreed to by Lightyear Southern Digital and BellSouth;
4.3.2.1.3 Tandem Switching shall provide Advanced Intelligent Network triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 Tandem Switching shall provide connectivity to PSAPs where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to LightyearSouthern Digital.
4.3.2.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 Tandem Switching shall process originating toll-free traffic received from LightyearSouthern Digital’s local switch.
4.3.2.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, to the extent such Tandem Switch has such capability.
Appears in 1 contract
Sources: Bellsouth® / Clec Agreement
Technical Requirements. 4.3.2.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90June 1, 1990. The requirements for Tandem Switching include, include but are not limited to the following:
4.3.2.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 Tandem Switching will provide screening as jointly agreed to by Lightyear e-Tel and BellSouth;
4.3.2.1.3 Where applicable, Tandem Switching shall provide Advanced Intelligent Network AIN triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 Where applicable, Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 Tandem Switching shall provide connectivity to PSAPs Public Safety Answering Point (PSAP)s where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to Lightyeare-Tel.
4.3.2.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 Tandem Switching shall process originating toll-toll free traffic received from Lightyeare-Tel’s local switch.
4.3.2.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, Element to the extent such Tandem Switch has such capability.
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 4.3.2.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90. The requirements for Tandem Switching include, include but are not limited to the following:
4.3.2.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 Tandem Switching will provide screening as jointly agreed to by Lightyear Spectrotel and BellSouth;
4.3.2.1.3 Tandem Switching shall provide Advanced Intelligent Network triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 Tandem Switching shall provide connectivity to PSAPs where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to LightyearSpectrotel.
4.3.2.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 Tandem Switching shall process originating toll-free traffic received from LightyearSpectrotel’s local switch.
4.3.2.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, Element to the extent such Tandem Switch has such capability.
Appears in 1 contract
Sources: Clec Agreement
Technical Requirements. 4.3.2.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90. The requirements for Tandem Switching include, but are not limited to the following:
4.3.2.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 Tandem Switching will provide screening as jointly agreed to by Lightyear VarTec and BellSouth;
4.3.2.1.3 Tandem Switching shall provide Advanced Intelligent Network triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 Tandem Switching shall provide connectivity to PSAPs where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to LightyearVarTec.
4.3.2.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 Tandem Switching shall process originating toll-free traffic received from LightyearVarTec’s local switch.
4.3.2.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, to the extent such Tandem Switch has such capability.
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 4.3.2.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90. The requirements for Tandem Switching include, but are not limited to the following:
4.3.2.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 Tandem Switching will provide screening as jointly agreed to by Lightyear Nexus and BellSouth;
4.3.2.1.3 Tandem Switching shall provide Advanced Intelligent Network triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 Tandem Switching shall provide connectivity to PSAPs where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to LightyearNexus.
4.3.2.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 Tandem Switching shall process originating toll-free traffic received from LightyearNexus’s local switch.
4.3.2.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, to the extent such Tandem Switch has such capability.
Appears in 1 contract
Sources: Bellsouth® / Clec Agreement
Technical Requirements. 4.3.2.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90. The requirements for Tandem Switching include, but are not limited to the following:
4.3.2.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 Tandem Switching will provide screening as jointly agreed to by Lightyear CGI and BellSouth;
4.3.2.1.3 Tandem Switching shall provide Advanced Intelligent Network triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 Tandem Switching shall provide connectivity to PSAPs where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to LightyearCGI.
4.3.2.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 Tandem Switching shall process originating toll-free traffic received from LightyearCGI’s local switch.
4.3.2.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, to the extent such Tandem Switch has such capability.
Appears in 1 contract
Sources: Clec Agreement
Technical Requirements. 4.3.2.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90. The requirements for Tandem Switching include, include but are not limited to the following:
4.3.2.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 Tandem Switching will provide screening as jointly agreed to by Lightyear Knology and BellSouth;
4.3.2.1.3 Tandem Switching shall provide Advanced Intelligent Network triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 Tandem Switching shall provide connectivity to PSAPs where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to LightyearKnology.
4.3.2.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 Tandem Switching shall process originating toll-free traffic received from LightyearKnology’s local switch.
4.3.2.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, Element to the extent such Tandem Switch has such capability.
Appears in 1 contract
Sources: Clec Agreement
Technical Requirements. 4.3.2.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90. The requirements for Tandem Switching include, include but are not limited to the following:
4.3.2.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 Tandem Switching will provide screening as jointly agreed to by Lightyear GSC and BellSouth;
4.3.2.1.3 Tandem Switching shall provide Advanced Intelligent Network triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 Tandem Switching shall provide connectivity to PSAPs where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to LightyearGSC.
4.3.2.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 Tandem Switching shall process originating toll-free traffic received from LightyearGSC’s local switch.
4.3.2.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, Element to the extent such Tandem Switch has such capability.
Appears in 1 contract
Sources: Clec Agreement
Technical Requirements. 4.3.2.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90. The requirements for Tandem Switching include, but are not limited to the following:
4.3.2.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 Tandem Switching will provide screening as jointly agreed to by Lightyear Budget Phone and BellSouth;
4.3.2.1.3 Tandem Switching shall provide Advanced Intelligent Network triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 Tandem Switching shall provide connectivity to PSAPs where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to LightyearBudget Phone.
4.3.2.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 Tandem Switching shall process originating toll-free traffic received from LightyearBudget Phone’s local switch.
4.3.2.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, to the extent such Tandem Switch has such capability.
Appears in 1 contract
Sources: Clec Agreement
Technical Requirements. 4.3.2.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90. The requirements for Tandem Switching include, but are not limited to the following:
4.3.2.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 Tandem Switching will provide screening as jointly agreed to by Lightyear Access America and BellSouth;
4.3.2.1.3 Tandem Switching shall provide Advanced Intelligent Network triggers t riggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 Tandem Switching shall provide p rovide connectivity to PSAPs where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to LightyearAccess America.
4.3.2.3 BellSouth shall control co ntrol congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 Tandem Switching shall process originating toll-free traffic received from LightyearAccess America’s local switch.
4.3.2.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, to the extent such Tandem Switch has such capability.
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 4.3.2.1 4.5.3.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90June 1, 1990. The requirements for Tandem Switching include, include but are not limited to the following:
4.3.2.1.1 4.5.3.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 4.5.3.1.2 Tandem Switching will provide screening as jointly agreed to by Lightyear Latin American Telephone and BellSouth;
4.3.2.1.3 4.5.3.1.3 Where applicable, Tandem Switching shall provide Advanced Intelligent Network AIN triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 4.5.3.1.4 Where applicable, Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 4.5.3.1.5 Tandem Switching shall provide connectivity to PSAPs Public Safety Answering Point (PSAP)s where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 4.5.3.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 4.5.3.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to LightyearLatin American Telephone.
4.3.2.3 4.5.3.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 4.5.3.4 Tandem Switching shall process originating toll-toll free traffic received from LightyearLatin American Telephone’s local switch.
4.3.2.5 4.5.3.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, Element to the extent such Tandem Switch has such capability.
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 4.3.2.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90. The requirements for Tandem Switching include, but are not limited to the following:
4.3.2.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 Tandem Switching will provide screening as jointly agreed to by Lightyear North Star Telecom and BellSouth;
4.3.2.1.3 Tandem Switching shall provide Advanced Intelligent Network triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 Tandem Switching shall provide connectivity to PSAPs where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to LightyearNorth Star Telecom.
4.3.2.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 Tandem Switching shall process originating toll-free traffic received from LightyearNorth Star Telecom’s local switch.
4.3.2.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, to the extent such Tandem Switch has such capability.
Appears in 1 contract
Sources: Clec Agreement