STRUCTURAL STEELWORK. All damaged paint areas are to be repaired in accordance with the original specification after completion of erection All paint to structural steelwork is to be sourced from an approved paint manufacturer and to be applied in accordance with the manufacturers specifications All bolts are to be degreased prior to erection and painted after erection Clean brickwork thoroughly and seal face brickwork with brick dressing 1 On external walls m2 1 969 Clean, prepare and apply one coat professional gypsum and plaster primer or similar approved and two coats Plascon low sheen pure acrylic paint. 2 On internal walls m2 5 723 Two coats interior quality PVA acrylic paint on work in bad condition 3 On slab ceiling m2 1 764 ▇▇▇▇ No. 13 Paintwork Prepared by Takgalang Consulting Clean entire surface with Polycell Sugar Soap using bristle brooms or brushes or Scotch Brite pads to remove all surface contaminants, rinse with tap water and allow to dry. Remove loose and flaky paint and sand surface to a firm edge, feather edges and dust off. ▇▇▇▇▇ paper any rust areas to bright metal and remove dust. Spot prime bare areas with Plascon Coastcote Primer Red Oxide (SNK 2) and allow 1 hour to dry. Finish with two coats of Nuroof Acrylic Roof Paint (TRP) or Dulux Roofguard (Code: D8) with an Clean, prepare and seal roof covering, Spot prime bare areas with Plascon Coastcote Primer Red Oxide (SNK 2), Finish with two coats of Nuroof Acrylic Roof Paint (TRP) or Dulux Roofguard (Code: D8) 4 On corrugated roof sheeting. m2 513 Prepare, sand down and apply Plascon Rust Remover (PR1). Remove rust conerter with clean water and apply either Plascon Universal Unsercoat (UC1) or Professional Undercoat (PU800) to bare and repaired areas. Apply two coats Plascon Professional Gloss enamel (PSB 1000). Colour: White 5 On windows with burglar bars m2 249 6 On door frames m2 199 7 On gutters, down pipes n.e. 300mm girth m 340 ▇▇▇▇ No. 13 Paintwork Prepared by Takgalang Consulting Prepare and apply one coat universal undercoat and two coats acrylic emulsion paint 8 On doors m2 895 9 On shelves m2 720 Carried to Collection ▇▇▇▇ No. 13 Paintwork Prepared by Takgalang Consulting Section No. 3
Appears in 1 contract
Sources: Building Agreement
STRUCTURAL STEELWORK. All damaged paint areas are to be repaired in accordance with the original specification after completion of erection All paint to structural steelwork is to be sourced from an approved paint manufacturer and to be applied in accordance with the manufacturers specifications All bolts are to be degreased prior to erection and painted after erection Clean brickwork thoroughly and seal face brickwork with brick dressing 1 On external walls m2 1 969 Clean, prepare and apply one coat professional gypsum and plaster primer or similar approved and two coats Plascon low sheen pure acrylic paint. 2 On internal walls m2 5 723 Two coats interior quality PVA acrylic paint on work in bad condition 3 On slab ceiling m2 1 764 ▇▇▇▇ Bill No. 13 Paintwork Prepared by Takgalang Consulting Clean entire surface with Polycell Sugar Soap using bristle brooms or brushes or Scotch Brite pads to remove all surface contaminants, rinse with tap water and allow to dry. Remove loose and flaky paint and sand surface to a firm edge, feather edges and dust off. ▇▇▇▇▇ paper any rust areas to bright metal and remove dust. Spot prime bare areas with Plascon Coastcote Primer Red Oxide (SNK 2) and allow 1 hour to dry. Finish with two coats of Nuroof Acrylic Roof Paint (TRP) or Dulux Roofguard (Code: D8) with an Clean, prepare and seal roof covering, Spot prime bare areas with Plascon Coastcote Primer Red Oxide (SNK 2), Finish with two coats of Nuroof Acrylic Roof Paint (TRP) or Dulux Roofguard (Code: D8) 4 On corrugated roof sheeting. m2 513 Prepare, sand down and apply Plascon Rust Remover (PR1). Remove rust conerter with clean water and apply either Plascon Universal Unsercoat (UC1) or Professional Undercoat (PU800) to bare and repaired areas. Apply two coats Plascon Professional Gloss enamel (PSB 1000). Colour: White 5 On windows with burglar bars m2 249 6 On door frames m2 199 7 On gutters, down pipes n.e. 300mm girth m 340 ▇▇▇▇ Bill No. 13 Paintwork Prepared by Takgalang Consulting Prepare and apply one coat universal undercoat and two coats acrylic emulsion paint 8 On doors m2 895 9 On shelves m2 720 Carried to Collection ▇▇▇▇ Bill No. 13 Paintwork Prepared by Takgalang Consulting Section No. 3
Appears in 1 contract
Sources: Building Agreement