Standard Drawing Sample Clauses

Standard Drawing. Standard Drawing means a Drawing listed in the Schedule HDrawings and Specifications as a standard drawing, as the same may be amended, supplemented or replaced from time to time by the Owner. The City of Toronto’s Standard Drawings can be found on-line at xxx.xxxxxxx.xx/xxx-xxxxxxxxx. Any of the OPS’ Standard Drawings can be acquired from the OPS. Information about OPS can be found at xxx.xxx.xx.xx.
AutoNDA by SimpleDocs
Standard Drawing. L744.3 nominal distance 600-900 mm between inside faces of outer pipe walls; for two pipes nr *** *** *** SEWER AND WATER MAIN REMOVATION AND ANCILLARY WORKS Y900 Allow for carrying out pressure tests and sterilization on the complete water supply pipeline before handing over to WSD item *** *** *** ------------------------------------------------------------------------------------------------------- To Collection of Lump Sum Item LSI11.1 *** ---------- *** Certain information on this page has been omitted and filed separately with the Securities and Exchange Commission. Confidential treatment has been requested with respect to the omitted portions. [STAMP]
Standard Drawing. L744.3 nominal distance 600-900 mm between inside faces of outer pipe walls; for two pipes nr *** *** *** Concrete stools and thrust blocks; in utility troughs Volume 0.1-0.2 m3; reinforced concrete grade 35/20D L723 nominal distance 300-600 mm between inside faces of outer pipe walls; for two pipes nr *** *** *** SEWER AND WATER MAIN REMOVATION AND ANCILLARY WORKS Y900 Allow for carrying out pressure tests and sterilization on the complete water supply pipeline before handing over to WSD item *** ------------------------------------------------------------------------------------------------------- To Collection of Lump Sum Item LSI2.2 *** ---------- *** Certain information on this page has been omitted and filed separately with the Securities and Exchange Commission. Confidential treatment has been requested with respect to the omitted portions. [STAMP]
Standard Drawing. Standard Drawing means a Drawing listed in the Schedule HDrawings and Specifications as a standard drawing, as the same may be amended, supplemented or replaced from time to time by the Owner. Exhibition Place’s Standard Drawings can be found on-line at xxx.xxxxxxx.xx/xxx-xxxxxxxxx. Any of the OPS’ Standard Drawings can be acquired from the OPS. Information about OPS can be found at xxx.xxx.xx.xx.

Related to Standard Drawing

  • Agreement to Repay Letter of Credit Drawings (a) The Borrower agrees to reimburse each Issuing Lender, by making payment to the Administrative Agent in immediately available funds at the Payment Office, for any payment or disbursement made by such Issuing Lender under any Letter of Credit issued by it (each such amount, so paid until reimbursed by the Borrower, an “Unpaid Drawing”), by making payment in Dollars (in the case of all Dollar Denominated Letters of Credit), Euros (in the case of Euro Denominated Letters of Credit) or Sterling (in the case of Sterling Denominated Letters of Credit) not later than one Business Day following receipt by the Borrower of notice of such payment or disbursement (provided that no such notice shall be required to be given if a Default or an Event of Default under Section 11.05 shall have occurred and be continuing, in which case the Unpaid Drawing shall be due and payable immediately without presentment, demand, protest or notice of any kind (all of which are hereby waived by the Borrower)), with interest on the amount so paid or disbursed by such Issuing Lender, to the extent not reimbursed prior to 1:00 P.M. (New York City time) on the date of such payment or disbursement, from and including the date paid or disbursed to but excluding the date such Issuing Lender was reimbursed by the Borrower therefor at a rate per annum equal to the Base Rate as in effect from time to time plus the Applicable Margin as in effect from time to time for Revolving Loans that are maintained as Base Rate Loans; provided, however, to the extent such amounts are not reimbursed prior to 1:00 P.M. (New York time) on the third Business Day following notice to the Borrower by the Administrative Agent or the respective Issuing Lender of such payment or disbursement, interest shall thereafter accrue on the amounts so paid or disbursed by such Issuing Lender (and until reimbursed by the respective Account Party) at a rate per annum which shall be (x) in the case of Dollar Denominated Letters of Credit, Sterling Denominated Letters of Credit, the Base Rate in effect from time to time plus the Applicable Margin for Revolving Loans in each case maintained as Base Rate Loans, as in effect from time to time plus 2% and (y) in the case of Euro Denominated Letters of Credit, the Overnight Euro Rate in effect from time to time plus the Applicable Margin for Euro Denominated Loans as in effect from time to time plus any Mandatory Costs plus 2%, in each such case, with interest to be payable on demand, provided further, that it is understood and agreed, however, that the notices referred to above in this clause (a) and in the immediately preceding proviso shall not be required to be given if a Default or an Event of Default under Section 11.05 shall have occurred and be continuing (in which case the Unpaid Drawings shall be due and payable immediately without presentment, demand, protest or notice of any kind (all of which are hereby waived by each Credit Party) and shall bear interest at the rate provided in the foregoing proviso on and after the third Business Day following the respective Drawing). The respective Issuing Lender shall give the Borrower prompt notice of each Drawing under any Letter of Credit, provided that the failure to give, or any delay in giving, any such notice shall in no way affect, impair or diminish the Borrower’s obligations under this Agreement.

  • Determination to Honor Drawing Request In determining whether to honor any request for drawing under any Letter of Credit by the beneficiary thereof, Agent shall be responsible only to determine that the documents and certificates required to be delivered under such Letter of Credit have been delivered and that they comply on their face with the requirements of such Letter of Credit and that any other drawing condition appearing on the face of such Letter of Credit has been satisfied in the manner so set forth.

  • Drawing One (1) Prize Winner will be chosen in a random drawing on or about February 1, 2023 from all eligible entries received. Odds of winning depend on the number of eligible entries received prior to the drawing. Return of prize notification as undeliverable or no response from the winner within seven (7) consecutive days after date of notification will result in disqualification and an alternate winner will be selected. If a prize winner is disqualified, Sponsor in its sole discretion will select a new winner. Sponsor reserves the right in its sole discretion to disqualify any individual it finds to be have tampered with the entry process or the operation of the promotion; to have acted in violation of the Official Rules; to have acted in violation of the terms of the website, or to have acted in an unsportsmanlike or disruptive manner, or with intent to annoy, abuse, threaten or harass any other person.

  • The Drawings The Drawings are the graphic and pictorial portions of the Contract Documents showing the design, location and dimensions of the Work, generally including plans, elevations, sections, details, schedules and diagrams.

  • As-Built Drawings Within thirty (30) Days of the successful completion of the Acceptance Test, Seller shall provide for Company review a set of the proposed as‑built drawings for the Company-Owned Interconnection Facilities constructed by Seller (and/or its Contractors). Within thirty (30) Days of Company's receipt of the proposed as‑built drawings, Company shall provide Seller with either (i) its comments on the proposed as‑built drawings or (ii) notice of acceptance of the proposed as‑built drawings as final as‑built drawings. If Company provides comments on the proposed as‑built drawings, Seller shall incorporate such comments into a final set of as‑built drawings and provide such final as‑built drawings to Company within twenty (20) Days of Seller's receipt of Company's comments.

  • Record Drawings A final set of drawings prepared by the Architect that incorporates all changes from all As- Builts, sketches, details, and clarifications.

  • Extension of the Expiry Date; Non-Extension Advance No earlier than the 60th day and no later than the 40th day prior to the then effective Expiry Date (unless such Expiry Date is on or after the date that is 15 days after the Final Legal Distribution Date for the Class A Certificates), the Borrower shall request that the Liquidity Provider extend the Expiry Date to the earlier of (i) the date that is 15 days after the Final Legal Distribution Date for the Class A Certificates and (ii) the date that is the day immediately preceding the 364th day occurring after the last day of the Consent Period (as hereinafter defined). Whether or not the Borrower has made such request, the Liquidity Provider shall advise the Borrower no earlier than the 40th day (or, if earlier, the date of the Liquidity Provider’s receipt of such request, if any, from the Borrower) and no later than the 25th day prior to the then effective Expiry Date (such period, the “Consent Period”), whether, in its sole discretion, it agrees to so extend the Expiry Date. If the Liquidity Provider advises the Borrower on or before the date on which the Consent Period ends that such Expiry Date shall not be so extended, or fails to irrevocably and unconditionally advise the Borrower on or before the date on which the Consent Period ends that such Expiry Date shall be so extended (and, in each case, if the Liquidity Provider shall not have been replaced in accordance with Section 3.5(e) of the Intercreditor Agreement), the Borrower shall be entitled on and after the date on which the Consent Period ends (but prior to the then effective Expiry Date) to request a Non-Extension Advance in accordance with Section 2.02(b) hereof and Section 3.5(d) of the Intercreditor Agreement.

  • Construction Drawings After approving the Additional Programming Information, Landlord shall cause the Architect and the Engineers to prepare and deliver to Tenant Construction Drawings that conform to the approved Space Plan and the approved Additional Programming Information. Such preparation and delivery shall occur within 15 business days after the later of Landlord’s approval of the Additional Programming Information or the mutual execution and delivery of this Agreement. Tenant shall approve or disapprove the Construction Drawings by notice to Landlord. If Tenant disapproves the Construction Drawings, Tenant’s notice of disapproval shall specify any revisions Tenant desires in the Construction Drawings. After receiving such notice of disapproval, Landlord shall cause the Architect and/or the Engineers to revise the Construction Drawings, taking into account the reasons for Tenant’s disapproval (provided, however, that Landlord shall not be required to cause the Architect or the Engineers to make any revision to the Construction Drawings that is inconsistent with the Landlord Requirements or that Landlord otherwise reasonably disapproves), and resubmit the Construction Drawings to Tenant for its approval. Such revision and resubmission shall occur within five (5) business days after the later of Landlord’s receipt of Tenant’s notice of disapproval or the mutual execution and delivery of this Agreement if such revision is not material, and within such longer period of time as may be reasonably necessary (but not more than 15 business days after the later of such receipt or such mutual execution and delivery) if such revision is material. Such procedure shall be repeated as necessary until Tenant has approved the Construction Drawings. The Construction Drawings approved by Landlord and Tenant are referred to in this Work Letter as the “Approved Construction Drawings”.

  • Letter of Credit Draw If (1) the Trustee shall have delivered a Demand Notice as provided in Section 3.5(b)(iii) of this Series Supplement and Hertz shall have failed to pay to the Trustee or deposit into the Series 2009-1 Distribution Account the amount specified in such Demand Notice in whole or in part by 12:00 noon (New York City time) on the Business Day following the making of the Demand Notice, (2) due to the occurrence of an Event of Bankruptcy (or the occurrence of an event described in clause (a) of the definition thereof, without the lapse of a period of 60 consecutive days) with respect to Hertz, the Trustee shall not have delivered such Demand Notice to Hertz or (3) there is a Preference Amount, the Trustee shall draw on the Series 2009-1 Letters of Credit, if any, by 12:00 p.m. (New York City time) on such Business Day in an amount equal to the lesser of (A) the amount that Hertz failed to pay under the Series 2009-1 Demand Note, the amount that the Trustee failed to demand for payment thereunder or the Preference Amount, as the case may be; and (B) the Series 2009-1 Letter of Credit Amount on such Business Day, by presenting to each Series 2009-1 Letter of Credit Provider a draft accompanied by a Series 2009-1 Certificate of Unpaid Demand Note Demand or, in the case of a Preference Amount, a Series 2009-1 Certificate of Preference Payment Demand; provided, however that if the Series 2009-1 Cash Collateral Account has been established and funded, the Trustee shall withdraw from the Series 2009-1 Cash Collateral Account and deposit in the Series 2009-1 Distribution Account an amount equal to the lesser of (x) the Series 2009-1 Cash Collateral Percentage on such Business Day of the lesser of the amounts set forth in clause (A) and (B) above and (y) the Series 2009-1 Available Cash Collateral Account Amount on such Business Day and draw an amount equal to the remainder of such amount on the Series 2009-1 Letters of Credit. The Trustee shall deposit, or cause the deposit of, the proceeds of any such draw on the Series 2009-1 Letters of Credit and the proceeds of any such withdrawal from the Series 2009-1 Cash Collateral Account into the Series 2009-1 Distribution Account and such proceeds shall be treated as Principal Collections.

  • Selection of Architect/Construction Drawings Tenant shall retain the architect/space planner (the “Architect”) approved by Landlord, which approval shall not be unreasonably withheld, to prepare the Construction Drawings. Tenant shall retain the engineering consultants designated by Landlord (the “Engineers”) to prepare all plans and engineering working drawings relating to the structural, mechanical, electrical, plumbing, HVAC, lifesafety, and sprinkler work in the Premises. The plans and drawings to be prepared by Architect and the Engineers hereunder shall be known collectively as the “Construction Drawings.” All Construction Drawings shall comply with the drawing format and specifications reasonably determined by Landlord, and shall be subject to Landlord’s approval. Tenant and Architect shall verify, in the field, the dimensions and conditions as shown on the relevant portions of the base building plans, and Tenant and Architect shall be solely responsible for the same, and Landlord shall have no responsibility in connection therewith. Landlord’s review of the Construction Drawings as set forth in this Section 3, shall be for its sole purpose and shall not imply Landlord’s review of the same, or obligate Landlord to review the same, for quality, design, Code compliance or other like matters. Accordingly, notwithstanding that any Construction Drawings are reviewed by Landlord or its space planner, architect, engineers and consultants, and notwithstanding any advice or assistance which may be rendered to Tenant by Landlord or Landlord’s space planner, architect, engineers, and consultants, Landlord shall have no liability whatsoever in connection therewith and shall not be responsible for any omissions or errors contained in the Construction Drawings.

Time is Money Join Law Insider Premium to draft better contracts faster.