Spray gun. The spray gun used shall be equipped with a nozzle 1.3 mm in diameter allowing a liquid flow rate of 0.24 + 0.02 1/minute at an operating pressure of 6.0 bars - 0, + 0.5 bar. Under these operation conditions the fan pattern obtained shall be 170 mm + 50 mm in diameter on the surface exposed to deterioration, at a distance of 380 mm + 10 mm from the nozzle.
Appears in 4 contracts
Sources: Agreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles, Agreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles, Agreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles
Spray gun. The spray gun used shall be equipped with a nozzle 1.3 mm in diameter allowing a liquid flow rate of 0.24 + ± 0.02 1/minute at an operating pressure of 6.0 bars - 0, + 0.5 bar. Under these operation conditions the fan pattern obtained shall be 170 mm + ± 50 mm in diameter on the surface exposed to deterioration, at a distance of 380 mm + ± 10 mm from the nozzle.
Appears in 2 contracts
Sources: Agreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles, Agreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles
Spray gun. The spray gun used shall be equipped with a nozzle 1.3 mm in diameter allowing a liquid flow rate of 0.24 + 0.02 1l/minute at an operating pressure of 6.0 bars - 0-0, + 0.5 +0.5 bar. Under these operation conditions the fan pattern obtained shall be 170 mm + 50 mm in diameter on the surface exposed to deterioration, at a distance of 380 mm + 10 mm from the nozzle.
Appears in 1 contract