Shelving Sample Clauses

Shelving. All stock shelving over eight (8) feet in height requires structural calculations prepared by an engineer licensed in the state of California. Shelving and its contents shall not interfere with sprinkler head water flow.

Shelving. Seller shall have completed installation of, and paid for, sufficient shelving at the Sunnyvale facility to shelve all records currently on the floor or on pallets, and shall have placed such records on such shelving.

Shelving. After presenting plans and obtaining the landlord’s consent, the tenant shall be allowed to install shelves up to a height of 6.20 m (top edge), in which case the shelf feet are to be placed on U 300 weight dividers (according to the photo, Attachment No. 6). Storage up to a storage height of 6.20 m (top edge); however a maximum up to the limit of the VDS ceiling sprinkler system, protection class BG 4.2, water installment of 7.5 mm is possible.

Shelving. Provide a minimum of 125 lineal feet of pre-manufactured shelving, such as Space Maker (vinyl coated wire construction). Installation to be field located by Tenant.

Shelving. The storage rooms shall have ability to have shelving. Shelving can be finished with a paint or stain consistent with the leased space décor and approved by TJJD. A minimum of one light fixture, shall be provided in each storage room and janitor’s closet.

Shelving. If Licensee has complied in all respects with the terms hereof, but (i) ceases to engage in any Commercialization Activities during any consecutive twelve-month period after the fifth anniversary hereof, and (ii) does not intend to engage in Commercialization Activities thereafter, then Licensor shall have the right to request a license change in exchange for commercially reasonable consideration upon issuance of reasonable written notice to that effect to Licensee (“Section 3.2.3

Shelving. Provide shelving in the janitor closet for storage of cleaning and paper supplies. Wood shelving shall be 25/32” No. 2 common kiln dried ponderosa pine as per grading rules of the Western Pine Association. Shelving shall be supported on cleats of the same material.

Shelving. Toughened glass (supplier to advise and assess) may be used for shelving. • Safe loading limits for glass and fixings must be sufficient to support the Objects and their mounts. • The base of the case is to be structurally sound and able to support the combined weight of the baseboard, backboard, any lighting elements or silica gel, glass and all Objects and mounts. • The base and/or sides of the unit can be constructed in birch-faced plywood or zero-formaldehyde (ZF) MDF, Fire Rated Class 1. • ZF MDF or softwood can be used for the internal support structure. • Emissions from ZF MDF and wood products should be controlled with the application of approved products such as Sellabond RJ119 or Moistop before painting. Care should be taken to ensure that the coating is applied offsite, with sufficient time allowed for curing and off-gassing, a minimum of 2 weeks. . .

Shelving. If an item is not part of the list of assets above, please add it to the list before submitting to the DSA