Sampling Parameters Sample Clauses

Sampling Parameters. The Analyst shall be required to undertake the following types and quantities of analysis.
Sampling Parameters. Each of the storm water samples collected pursuant to Paragraph 12 of 26 this Consent Decree shall be analyzed for each of the constituents listed in Table 1. With the exception 27 of pH testing, all storm water analysis shall be done by a laboratory accredited by the State of California. 28 Samples collected from each of the Facilities shall be delivered to the laboratory as soon as possible to [Proposed] CONSENT DECREE 10 1 ensure that sample “hold time” is not exceeded. Analytical methods used by the laboratory shall be 2 adequate to detect the individual constituents at or below the limits specified in Table 1. Sampling 3 results shall be provided to Baykeeper within fourteen (14) days of Defendant’s receipt of the laboratory 4 report from each sampling event pursuant to the Notice provisions of Paragraph 39 herein.
Sampling Parameters. (i) Tier II Chemical Screening 3.5.1 All samples should be tested for all parameters stated in Table 1 – Analytical Methodology in Appendix B of ETWB TC(W) No. 34/2002. The parameters to be analyzed, methodology used and detection limits are presented in Table 3-2. Cadmium (Cd) 3050B 6020A or 7000A or 7131A 0.2 Chromium (Cr) 3050B 6010C or 7000A or 7190 8 Copper (Cu) 3050B 6010C or 7000A or 7210 7 Mercury (Hg) 7471A 7471A 0.05 Nickel (Ni) 3050B 6010C or 7000A or 7520 4 Lead (Pb) 3050B 6010C or 7000A or 7420 8 Silver (Ag) 3050B 6020A or 7000A or 7761 0.1 Zinc (Zn) 3050B 6010C or 7000A or 7950 20 Arsenic 3050B 6020A or 7000A or 7061A 1 Organic-PAHs (µg/kg dry weight) Low Molecular Weight PAHs† 3550B or 3540C and 3630C 8260B or 8270C 55 High Molecular Weight PAHs†† 3550B or 3540C and 3630C 8260B or 8270C 170 Organic-non-PAHs (µg/kg dry weight) Organometallics (µg TBT/L in interstitial water) Tributyltin Krone et al. (1989) * – GC/MS UNEP/IOC/IAEA ** Krone et al. (1989) * – GC/MS UNEP/IOC/IAEA** 0.015 Notes: † Low molecular weight PAHs include acenaphthene, acenaphthylene, anthracene, fluorene, naphthalene, and phenanthrene.