Process Summary Clause Samples

The Process Summary clause provides an overview of the key steps, procedures, or stages involved in a particular process outlined in the agreement. It typically outlines the sequence of actions, responsible parties, and any critical deadlines or milestones that must be met. By summarizing the process in a clear and organized manner, this clause helps all parties understand their roles and expectations, reducing confusion and ensuring that the process is followed consistently.
Process Summary. In this section we provide a summary of the process by which globally unique LINK IDs are established for each individual and HOUSEHOLD IDs for each household, without revealing any PII. The details of each step appear in the following sections.
View Source
Process Summary. The front-end of the project involves conversion of concentrated lithium chloride into technical grade lithium. The backend of the facility involves conversion of technical grade lithium to battery grade lithium. The process design will allow for: 1. Back-end: Importation of technical grade lithium carbonate and processing to a battery grade lithium carbonate 2. Combined front and back end: Importation of a concentrated lithium chloride and processing to a battery grade lithium carbonate The process design scope of Services includes both the front and back end of the facility. Appendix A gives the simplified Process Flow Sheet.
View Source
Process Summary. This letter sets out the proposed process and procedures that will govern this phase of the Transaction. In order to assist you to prepare your Indicative offer, we have enclosed with this letter a CIM that includes information about Chellomedia including the 2013-2018 approved Long-Range Plan for Chellomedia. Following the review the Indicative Offers received, Liberty Global may, at their sole discretion, invite a limited number of interested parties to participate in the next stage of the process. It is envisaged that the next phase of the Transaction will include: (i) a detailed management presentation; (ii) access to an electronic data room; (iii) access to a written Q&A process; (iv) receipt of a Financial and Tax Vendor Due Diligence report prepared by Ernst & Young; (v) receipt of a Legal Vendor Due Diligence report prepared by ▇▇▇▇▇ Lovells; (vi) a Q&A session with the VDD providers; (vii) receipt and discussions on the draft legal documentation including a Sale and Purchase Agreement (the “SPA”). Further information pertaining to the Business and process will be made available during the next phase. ▇▇▇▇▇▇ ▇▇▇▇▇▇▇ & Co. International Plc., ▇▇ ▇▇▇▇▇ ▇▇▇▇▇▇, ▇▇▇▇▇▇ ▇▇▇▇▇, ▇▇▇▇▇▇ ▇▇▇ ▇▇▇, ▇▇▇▇▇▇ ▇▇▇▇▇▇▇ Authorised and Regulated by the Financial Services Authority
View Source
Process Summary. Blochman Lease is an oil and gas production facility. Oil, water and gas from production ▇▇▇▇▇ are piped to the Bell Lease for processing. Currently, Blochman lease consists only of oil/gas ▇▇▇▇▇, miscellaneous processing equipment and a gas gathering system.
View Source
Process Summary 
View Source

Related to Process Summary

  • Service Description 2.1 General

  • System Description The wet detention basin is designed to trap 80% of sediment in runoff and maintain pre-development downstream peak flows. The basin has two forebays (smaller ponds) located at the low end of two grass ▇▇▇▇▇▇. In addition to runoff conveyance, the grass ▇▇▇▇▇▇ also allow infiltration and filtering of pollutants, especially from smaller storms. The forebays are each 4 feet deep. They are connected to the main pool by 18 and 24-inch metal pipes that outlet onto a rock chute. The forebays will trap coarse sediments in runoff, such as road sands, thus reducing maintenance of the main basin. The main pool will trap the finer suspended sediment. To do this, the pond size, water level and outlet structures must be maintained as specified in this Agreement (see Figures 1, 2 and 3). The main basin receives runoff from a 67.1 acre drainage area (41.2 acres within the subdivision and 25.9 acres off- site drainage coming from the east). During high rainfall or snow melt events, the water level will temporarily rise and slowly drain down to the elevation of the control structure. The water level is controlled by a 12-inch concrete pipe extending through the berm in the northwest corner of the basin (see Figures 1 and 3). On the face of the 12- inch pipe, there is metal plate with a 3-inch drilled hole (orifice) with stone in front of it. This orifice controls the water level and causes the pond to temporarily rise during runoff events. Washed stone (1-2” diameter) is placed in front of the orifice to prevent clogging. High flows may enter the grated concrete riser or flow over the rock lined emergency spillway. “As-built” construction drawings of the basin, showing actual dimensions, elevations, outlet structures, etc. will be recorded as an addendum(s) to this agreement within 60 days after Waukesha County accepts verification of construction from the project engineer.

  • Protocol The attached Protocol shall be an integral part of this Agreement.

  • GENERAL SERVICE DESCRIPTION Service Provider currently provides active medical, pharmacy(Rx) and dental administration for coverages provided through Empire and Anthem (medical), Medco(Rx), MetLife(dental) and SHPS (FSA) (Empire, Anthem, Medco, MetLife and SHPS collectively, the “Vendors”) for its U.S. Active, Salaried, Eligible Employees (“Covered Employees”). Service Provider shall keep the current contracts with the Vendors and the ITT CORPORATION SALARIED MEDICAL AND DENTAL PLAN (PLAN NUMBER 502 EIN ▇▇-▇▇▇▇▇▇▇) and the ITT Salaried Medical Plan and Salaried Dental Plan General Plan Terms (collectively, the “Plans”) and all coverage thereunder in full force through December 31, 2011 for Service Recipient’s Covered Employees. All claims of Service Recipient’s Covered Employees made under the Plans and incurred on or prior to December 31, 2011 the (“2011 Plan Year”) will be adjudicated in accordance with the current contract and Service Provider will continue to take such actions on behalf of Service Recipient’s Covered Employees as if such employees are employees of Service Provider. All medical, dental, pharmacy and FSA claims of Service Recipient’s Covered Employees made under the Plans (the “Claims”) will be paid by the Vendors on behalf of the Service Provider. Service Recipient will pay Service Provider for coverage based on 2011 budget premium rates previously set for the calendar year 2011 and described in the “Pricing” section below. Service Recipient will pay Service Provider monthly premium payments for this service, for any full or partial months, based on actual enrollment for the months covered post-spin using enrollments as of the first (1st) calendar day of the month, commencing on the day after the Distribution Date. Service Recipient will prepare and deliver to Service Provider a monthly self ▇▇▇▇ containing cost breakdown by business unit and plan tier as set forth on Attachment A, within five (5) Business Days after the beginning of each calendar month. The Service Recipient will be required to pay the Service Provider the monthly premium payments within ten (10) Business Days after the beginning of each calendar month. A detailed listing of Service Recipient’s employees covered, including the Plans and enrollment tier in which they are enrolled, will be made available to Service Provider upon its reasonable request. Service Provider will retain responsibility for executing funding of Claim payments and eligibility management with Vendors through December 31, 2013. Service Provider will conduct a Headcount True-Up (as defined below) of the monthly premiums and establish an Incurred But Not Reported (“IBNR”) claims reserve for Claims incurred prior to December 31, 2011 date, but paid after that date, and conduct a reconciliation of such reserve. See “Headcount True-Up” and “IBNR Reconciliation” sections under Additional Pricing for details.

  • Disturbance Analysis Data Exchange The Parties will cooperate with one another and the NYISO in the analysis of disturbances to either the Large Generating Facility or the New York State Transmission System by gathering and providing access to any information relating to any disturbance, including information from disturbance recording equipment, protective relay targets, breaker operations and sequence of events records, and any disturbance information required by Good Utility Practice.