Prepare Preliminary Technical Specifications Sample Clauses
The 'Prepare Preliminary Technical Specifications' clause requires one party, typically the contractor or service provider, to develop and deliver an initial set of technical requirements or design criteria for a project. This process involves gathering relevant information, consulting with stakeholders, and drafting documents that outline the essential technical parameters, performance standards, and materials to be used. By establishing these preliminary specifications early in the project, the clause ensures that all parties have a clear, shared understanding of the technical expectations, reducing the risk of misunderstandings or costly changes later in the project lifecycle.
Prepare Preliminary Technical Specifications. This task includes assembling the technical specifications necessary for the project. Standard FAA specifications will be utilized where possible, with the guidance from FAA AC 150/5370-10 (Current Edition), Standard Specifications for Construction of Airports. Additional specifications will be prepared to address work items for materials that are not covered by the standard FAA specifications. The standard specifications to be utilized within the airfield shall include, but are not limited to, the following: • Item C-100 Contractor Quality Control Program (CQCP) • Item C-102 Temporary Air and Water Pollution, Soil Erosion and Siltation Control • Item C-105 Mobilization • Item C-110 Method of Estimating Percentage of Material Within Specification Limits (PWL) • Item P-101 Preparation/Removal of Existing Pavements • Item P-151 Clearing and Grubbing • Item P-152 Excavation, Subgrade and Embankment • Item P-154 Subbase Course • Item P-209 Crushed Aggregate Base Course • Item P-306 Lean Concrete Base Course • Item P-401 Asphalt Mix Pavement • Item P-501 Cement Concrete Pavement • Item P-603 Emulsified Asphalt Tack Coat • Item P-610 Concrete for Miscellaneous Structures • Item P-620 Runway and Taxiway Marking • Item D-701 Pipe for Storm Drains and Culverts • Item F-162 Chain Link Fences • Item T-901 Seeding • Item L-108 Underground Power Cable for Airports • Item L-110 Airport Underground Electrical Duct Banks and Conduits • Item L-115 Electrical Manholes and Junction Structures • Item L-125 Installation of Airport Lighting Systems Additional Non-FAA specifications will include but are not limited to applicable standard CDOT, APWA, and Town of Hayden technical specifications.
Prepare Preliminary Technical Specifications a. Mobilization
b. Airfield Safety and Traffic Control
c. Demolition
d. Recycled Aggregate Base e. Excavation and Embankment, Item P-152 f. Temporary Air and Water Pollution, Soil Erosion, and Siltation Control, Item P-156; Aggregate Base Course (Caltrans); Plant Mix Bituminous Pavements (Caltrans)
Prepare Preliminary Technical Specifications. This task includes assembling the technical specifications necessary for the project. Standard FAA specifications will be utilized where possible, with the guidance from FAA AC 150/5370-10 (Current Edition), Standard Specifications for Construction of Airports. Additional specifications will be prepared to address work items for materials that are not covered by the standard FAA specifications. The standard specifications to be utilized shall include, but are not limited to, the following: • Item C-102 Temporary Air and Water Pollution, Soil Erosion and Siltation Control • Item C-105 Mobilization • Item L-101 Airport Rotating Beacons • Item L-108 Underground Power Cable for Airports • Item L-110 Airport Underground Electrical Duct Banks and Conduits • Item L-115 Electrical Manholes and Junction Structures • Item L-119 Airport Obstruction Lights Additional Non-FAA specifications will include, but are not limited to, the following items: • L-126 Automated Weather Observing System
Prepare Preliminary Technical Specifications. This task includes assembling the technical specifications necessary for the project. Standard FAA specifications will be utilized where possible, with the guidance from the current edition of the FAA AC 150/5370-10H, Standard Specifications for Construction of Airports. Additional specifications will be prepared to address work items for materials that are not covered by the standard FAA specifications. The standard specifications to be utilized shall include, but are not limited to, the following: Item C-100 Contractor Quality Control Program (CQCP) Item C-102 Temporary Air and Water Pollution, Soil Erosion and Siltation Control Item C-105 Mobilization Item P-152 Excavation, Subgrade, and Embankment Item P-604 Compression Joint Seals for Concrete Pavements Item P-605 Joint Sealants for Pavements Item P-608 Emulsified Asphalt Seal Coat Item P-620 Runway and Taxiway Marking Item D-701 Pipe for Storm Drains and Culverts Item D-751 Manholes, Catch Basins, Inlets and Inspection Holes
Prepare Preliminary Technical Specifications. This task includes assembling the technical specifications necessary for the project. Standard FAA specifications will be utilized where possible, with the guidance from the current edition of the FAA Advisory Circular 150/5220-20A, Airport Snow and Ice Control Equipment. Additional specifications will be prepared to address work items for materials that are not covered by the standard FAA specifications. This task also includes coordination with the Sponsor on the vehicle specification and preparing the vehicle specification.
Prepare Preliminary Technical Specifications. The engineer will assemble the technical specifications necessary for the intended work. MoDOT Standard Specifications for Road and Bridge Construction will be followed as appropriate. Discussions with MoDOT and the Sponsor will provide guidance to the Engineer in the use of appropriate technical specifications.