Common use of Plan Requirements Clause in Contracts

Plan Requirements. The Construction Documents shall be fully detailed and fully coordinated with each other and with the Base Building design, shall show complete dimensions, and shall have designated thereon all points of location and other matters, including special construction details and finish schedules. Tenant and its architect shall be solely responsible for ascertaining all existing field conditions. Any plans in Landlord’s files, if any, that are provided to Tenant shall be without any representation or warranty. All drawings shall be uniform size, shall incorporate the standard electrical and plumbing symbols, and be at a scale of 1/8” = 1’0” or larger. Materials and/or installation shall be explicitly noted and adequately specified to allow for performing Landlord review, securing a building permit, pursuing construction pricing, and performing construction. All equipment and installations shall be made in accordance with standard materials and procedures unless a deviation outside of industry standards is shown on the Construction Documents and approved by Landlord. To the extent practicable, a concise description of products, acceptable substitutes (if any), and installation procedures and standards shall be provided to the extent customary. Product cuts (where reasonably requested by ▇▇▇▇▇▇▇▇) must be provided and special mechanical or electrical loads noted. ▇▇▇▇▇▇▇▇’s approval of the plans, drawings, specifications or other submissions in respect of any work, addition, alteration or improvement to be undertaken by or on behalf of Tenant shall create no liability or responsibility on the part of Landlord for their completeness, design sufficiency or compliance with requirements of any applicable laws, rules or regulations of any governmental or quasi-governmental agency, board or authority. Tenant shall provide a full set of as-builts upon final completion of construction of each applicable Phase Premises.

Plan Requirements. The Construction Documents shall be fully detailed and fully coordinated with each other and with the Base Building design, shall show complete dimensions, and shall have designated thereon all points of location and other matters, including special construction details and finish schedules. Tenant and its architect shall be solely responsible for ascertaining all existing field conditions. Any plans in Landlord’s files, if any, that are provided to Tenant shall be without any representation or warranty. All drawings shall be uniform size, shall incorporate the standard electrical and plumbing symbols, and be at a scale of 1/8” = 1’01 ‘0” or larger. Materials and/or installation shall be explicitly noted and adequately specified to allow for performing Landlord review, securing a building permit, pursuing construction pricing, and performing construction. All equipment and installations shall be made in accordance with standard materials and procedures unless a deviation outside of industry standards is shown on the Construction Documents and approved by Landlord. To the extent practicable, a concise description of products, acceptable substitutes (if any)substitutes, and installation procedures and standards shall be provided provided. Acceptable manufacturers and vendors should be specified for any products or materials that are to the extent customarybe regionally sourced. Product cuts (where reasonably requested by ▇▇▇▇▇▇▇▇) must be provided and special mechanical or electrical loads noted. ▇▇▇▇▇▇▇▇Landlord’s approval of the plans, drawings, specifications or other submissions in respect of any work, addition, alteration or improvement to be undertaken by or on behalf of Tenant shall create no liability or responsibility on the part of Landlord for their completeness, design sufficiency or compliance with requirements of any applicable laws, rules or regulations of any governmental or quasi-governmental agency, board or authority. Tenant shall provide a full set of as-builts upon final completion of construction of each applicable Phase Premises.

Plan Requirements. The Construction Documents shall be fully detailed and fully coordinated with each other and with the Base Building design, shall show complete dimensions, and shall have designated thereon all points of location and other matters, including special construction details and finish schedules. Tenant and its architect shall be solely responsible for ascertaining all existing field conditions; provided that Landlord agrees to provide any plans in Landlord’s files. Any plans in Landlord’s files, if any, that are provided to Tenant shall be without any representation or warranty. All drawings shall be uniform size, shall incorporate the standard electrical and plumbing symbols, and be at a scale of 1/8” = 1’0” or larger. Materials and/or installation shall be explicitly noted and adequately specified to allow for performing Landlord review, securing a building permit, pursuing construction pricing, and performing construction. All equipment and installations shall be made in accordance with standard materials and procedures unless a deviation outside of industry standards is shown on the Construction Documents and approved by Landlord. To the extent practicable, a concise description of products, acceptable substitutes (if any), and installation procedures and standards shall be provided to the extent customary. Product cuts (where reasonably requested by ▇▇▇▇▇▇▇▇Landlord) must be provided and special mechanical or electrical loads noted. ▇▇▇▇▇▇▇▇Landlord’s approval of the plans, drawings, specifications or other submissions in respect of any work, addition, alteration or improvement to be undertaken by or on behalf of Tenant shall create no liability or responsibility on the part of Landlord for their completeness, design sufficiency or compliance with requirements of any applicable laws, rules or regulations of any governmental or quasi-governmental agency, board or authority. Tenant shall provide a full set of as-builts upon final completion of construction of each applicable Phase Premises.

Plan Requirements. The Construction Documents shall be fully detailed and fully coordinated with each other and with the Base Building design, shall show complete dimensions, and shall have designated thereon all points of location and other matters, including special construction details and finish schedules. Tenant and its architect shall be solely responsible for ascertaining all existing field conditions. Any plans in Landlord’s files, if any, that are provided to Tenant shall be without any representation or warranty. All drawings shall be uniform size, shall incorporate the standard electrical and plumbing symbols, and be at a scale of 1/8” = 1’0” or larger. Materials and/or installation shall be explicitly noted and adequately specified to allow for performing Landlord review, securing a building permit, pursuing construction pricing, and performing construction. All equipment and installations shall be made in accordance with standard materials and procedures unless a deviation outside of industry standards is shown on the Construction Documents and approved by Landlord. To the extent practicable, a concise description of products, acceptable substitutes (if any), and installation procedures and standards shall be provided to the extent customary. Product cuts (where reasonably requested by ▇▇▇▇▇▇▇▇Landlord) must be provided and special mechanical or electrical loads noted. ▇▇▇▇▇▇▇▇Landlord’s approval of the plans, drawings, specifications or other submissions in respect of any work, addition, alteration or improvement to be undertaken by or on behalf of Tenant shall create no liability or responsibility on the part of Landlord for their completeness, design sufficiency or compliance with requirements of any applicable laws, rules or regulations of any governmental or quasi-governmental agency, board or authority. Tenant shall provide a full set of as-builts upon final completion of construction of each applicable Phase Premises.

Plan Requirements. The Construction Documents shall be fully detailed and fully coordinated with each other and with the Base Building design, shall show complete dimensions, and shall have designated thereon all points of location and other matters, including special construction details and finish schedules. Tenant and its architect shall be solely responsible for ascertaining all existing field conditions. Any plans in Landlord’s files, if any, that are provided to Tenant shall be without any representation or warranty. All drawings shall be uniform size, shall incorporate the standard electrical and plumbing symbols, and be at a scale of 1/8” = 1’0” or larger. Materials and/or installation shall be explicitly noted and adequately specified to allow for performing Landlord review, securing a building permit, pursuing construction pricing, and performing construction. All equipment and installations shall be made in accordance with standard materials and procedures unless a deviation outside of industry standards is shown on the Construction Documents and approved by Landlord. To the extent practicable, a concise description of products, acceptable substitutes (if any)substitutes, and installation procedures and standards shall be provided provided. Acceptable manufacturers and vendors should be specified for any products or materials that are to the extent customarybe regionally sourced. Product cuts (where reasonably requested by ▇▇▇▇▇▇▇▇) must be provided and special mechanical or electrical loads noted. ▇▇▇▇▇▇▇▇Landlord’s approval of the plans, drawings, specifications or other submissions in respect of any work, addition, alteration or improvement to be undertaken by or on behalf of Tenant shall create no liability or responsibility on the part of Landlord for their completeness, design sufficiency or compliance with requirements of any applicable laws, rules or regulations of any governmental or quasi-governmental agency, board or authority. Tenant shall provide a full set of as-builts upon final completion of construction of each applicable Phase Premises.

Plan Requirements. The Construction Documents shall be fully detailed and fully coordinated with each other and with the Base Building design, shall show complete dimensions, and shall have designated thereon all points of location and other matters, including special construction details and finish schedules. Tenant and its architect shall be solely responsible for ascertaining all existing field conditions. Any plans in Landlord’s files, if any, that are provided to Tenant shall be without any representation or warranty. All drawings shall be uniform size, shall incorporate the standard electrical and plumbing symbols, and be at a scale of 1/8” = 1’0” or larger. Materials and/or installation shall be explicitly noted and adequately specified to allow for performing Landlord review, securing a building permit, pursuing construction pricing, and performing construction. All equipment and installations shall be made in accordance with standard materials and procedures unless a deviation outside of industry standards is shown on the Construction Documents and approved by Landlord. To the extent practicable, a concise description of products, acceptable substitutes (if any), and installation procedures and standards shall be provided to the extent customary. Product cuts (where reasonably requested by ▇▇▇▇▇▇▇▇Landlord) must be provided and special mechanical or electrical loads noted. ▇▇▇▇▇▇▇▇Landlord’s approval of the plans, drawings, specifications or other submissions in respect of any work, addition, alteration or improvement to be undertaken by or on behalf of Tenant shall create no liability or responsibility on the part of Landlord for their completeness, design sufficiency or compliance with requirements of any applicable laws, rules or regulations of any governmental or quasi-governmental agency, board or authority. Tenant shall provide a full set of as-builts upon final completion of construction of each applicable Phase PremisesLaws.