Listing of Underlying Shares and Related Matters If the Company applies to have its Common Stock or other securities traded on any stock exchange or market, it shall include in such application the Shares and the Warrant Shares and will take such other action as is necessary to cause such Common Stock to be so listed. Thereafter, the Company will use commercially reasonable efforts to continue the listing and trading of its Common Stock on such exchange or market and, in accordance, therewith, will use commercially reasonable efforts to comply in all respects with the Company’s reporting, filing and other obligations under the bylaws or rules of such exchange or market, as applicable.
ISSUE OF GLOBAL NOTES 3.1 Subject to subclause 3.4, following receipt of a faxed copy of the applicable Final Terms signed by the Issuer, the Issuer authorises the Agent and the Agent agrees, to take the steps required of the Agent in the Procedures Memorandum.
CDSCs Related to the Redemption of Non-Omnibus Commission Shares CDSCs in respect of the redemption of Non-Omnibus Commission Shares shall be allocated to the Distributor or a Successor Distributor depending upon whether the related redeemed Commission Share is attributable to the Distributor or such Successor Distributor, as the case may be, in accordance with Part I above.
Pre-Release of American Depositary Shares Notwithstanding Section 2.3, the Depositary may deliver American Depositary Shares prior to the receipt of Shares pursuant to Section 2.2 (a “Pre-Release”). The Depositary may, pursuant to Section 2.5, deliver Shares upon the surrender of American Depositary Shares that have been Pre-Released, whether or not that surrender is prior to the termination of that Pre-Release or the Depositary knows that those American Depositary Shares have been Pre-Released. The Depositary may receive American Depositary Shares in lieu of Shares in satisfaction of a Pre-Release. Each Pre-Release must be (a) preceded or accompanied by a written representation from the person to whom American Depositary Shares or Shares are to be delivered, that such person, or its customer, owns the Shares or American Depositary Shares to be remitted, as the case may be, (b) at all times fully collateralized with cash or such other collateral as the Depositary deems appropriate, (c) terminable by the Depositary on not more than five (5) business days’ notice, and (d) subject to all indemnities and credit regulations that the Depositary deems appropriate. The number of American Depositary Shares outstanding at any time as a result of Pre-Release will not normally exceed thirty percent (30%) of all American Depositary Shares outstanding; provided, however, that the Depositary reserves the right to change or disregard that limit from time to time as it deems appropriate. The Depositary may retain for its own account any compensation received by it in connection with Pre-Release.
Redemption of Warrants When the Price per Class A Ordinary Share Equals or Exceeds $10.00. Subject to Section 6.4 hereof, not less than all of the outstanding Warrants may be redeemed, at the option of the Company, at any time during the Exercise Period, at the office of the Warrant Agent, upon notice referred to in Section 6.2 below, at a Redemption Price of $0.10 per Warrant, provided that (i) the Reference Value equals or exceeds $10.00 per share (subject to adjustment in compliance with Section 4 hereof) and (ii) if the Reference Value is less than $18.00 per share (subject to adjustment in compliance with Section 4 hereof), the Private Placement Warrants are also concurrently called for redemption on the same terms as the outstanding Public Warrants. During the 30-day Redemption Period in connection with a redemption pursuant to this subsection 6.1.2, Registered Holders of the Warrants may elect to exercise their Warrants on a “cashless basis” pursuant to subsection 3.3.1 and receive a number of Class A ordinary shares determined by reference to the table below, based on the Redemption Date (calculated for purposes of the table as the period to expiration of the Warrants) and the “Redemption Fair Market Value” (as such term is defined in this subsection 6.1.2) (a “Make-Whole Exercise”). Solely for purposes of this subsection 6.1.2, the “Redemption Fair Market Value” shall mean the volume weighted average price of the Class A ordinary shares for the ten (10) trading days immediately following the date on which notice of redemption pursuant to this subsection 6.1.2 is sent to the Registered Holders. In connection with any redemption pursuant to this subsection 6.1.2, the Company shall provide the Registered Holders with the Redemption Fair Market Value no later than one (1) Business Day after the ten (10) trading day period described above ends. Redemption Date Redemption Fair Market Value of Class A ordinary shares (period to expiration of warrants) <10.00 11.00 12.00 13.00 14.00 15.00 16.00 17.00 >18.00 60 months 0.261 0.281 0.297 0.311 0.324 0.337 0.348 0.358 0.361 57 months 0.257 0.277 0.294 0.310 0.324 0.337 0.348 0.358 0.361 54 months 0.252 0.272 0.291 0.307 0.322 0.335 0.347 0.357 0.361 51 months 0.246 0.268 0.287 0.304 0.320 0.333 0.346 0.357 0.361 48 months 0.241 0.263 0.283 0.301 0.317 0.332 0.344 0.356 0.361 45 months 0.235 0.258 0.279 0.298 0.315 0.330 0.343 0.356 0.361 42 months 0.228 0.252 0.274 0.294 0.312 0.328 0.342 0.355 0.361 39 months 0.221 0.246 0.269 0.290 0.309 0.325 0.340 0.354 0.361 36 months 0.213 0.239 0.263 0.285 0.305 0.323 0.339 0.353 0.361 33 months 0.205 0.232 0.257 0.280 0.301 0.320 0.337 0.352 0.361 30 months 0.196 0.224 0.250 0.274 0.297 0.316 0.335 0.351 0.361 27 months 0.185 0.214 0.242 0.268 0.291 0.313 0.332 0.350 0.361 24 months 0.173 0.204 0.233 0.260 0.285 0.308 0.329 0.348 0.361 21 months 0.161 0.193 0.223 0.252 0.279 0.304 0.326 0.347 0.361 18 months 0.146 0.179 0.211 0.242 0.271 0.298 0.322 0.345 0.361 15 months 0.130 0.164 0.197 0.230 0.262 0.291 0.317 0.342 0.361 12 months 0.111 0.146 0.181 0.216 0.250 0.282 0.312 0.339 0.361 9 months 0.090 0.125 0.162 0.199 0.237 0.272 0.305 0.336 0.361 6 months 0.065 0.099 0.137 0.178 0.219 0.259 0.296 0.331 0.361 3 months 0.034 0.065 0.104 0.150 0.197 0.243 0.286 0.326 0.361 0 months — — 0.042 0.115 0.179 0.233 0.281 0.323 0.361 The exact Redemption Fair Market Value and Redemption Date may not be set forth in the table above, in which case, if the Redemption Fair Market Value is between two values in the table or the Redemption Date is between two redemption dates in the table, the number of Class A ordinary shares to be issued for each Warrant exercised in a Make-Whole Exercise will be determined by a straight-line interpolation between the number of shares set forth for the higher and lower Redemption Fair Market Values and the earlier and later redemption dates, as applicable, based on a 365- or 366-day year, as applicable. The share prices set forth in the column headings of the table above shall be adjusted as of any date on which the number of shares issuable upon exercise of a Warrant or the Warrant Price is adjusted pursuant to Section 4 hereof. In the event of a Warrant Price adjustment pursuant to Section 4, the adjusted share prices in the column headings shall equal the share prices immediately prior to such adjustment, multiplied by a fraction, the numerator of which is the Warrant Price after such adjustment and the denominator of which is the Warrant Price immediately prior to such adjustment. In such an event, the number of shares in the table above shall be adjusted by multiplying such share amounts by a fraction, the numerator of which is the number of shares deliverable upon exercise of a Warrant immediately prior to such adjustment and the denominator of which is the number of shares deliverable upon exercise of a Warrant as so adjusted. The number of shares in the table above shall be adjusted in the same manner and at the same time as the number of shares issuable upon exercise of a Warrant. If the Warrant Price is adjusted pursuant to Section 4.4, the adjusted share prices set forth in the column headings of the table above shall be multiplied by a fraction, the numerator of which is the higher of the Market Value and the Newly Issued Price and the denominator of which is $10.00.
Securities Issuable in the Form of a Global Security (a) If the Company shall establish pursuant to Sections 2.02 and 3.01 that the Securities of a particular series are to be issued in whole or in part in the form of one or more Global Securities, then the Company shall execute and the Trustee or its agent shall, in accordance with Section 3.03 and the Company Order delivered to the Trustee or its agent thereunder, authenticate and deliver, such Global Security or Securities, which (i) shall represent, and shall be denominated in an amount equal to the aggregate principal amount of, the Outstanding Securities of such series to be represented by such Global Security or Securities, or such portion thereof as the Company shall specify in a Company Order, (ii) shall be registered in the name of the Depository for such Global Security or Securities or its nominee, (iii) shall be delivered by the Trustee or its agent to the Depository or pursuant to the Depository’s instruction and (iv) shall bear a legend substantially to the following effect: “Unless this certificate is presented by an authorized representative of the Depository to Issuer or its agent for registration of transfer, exchange, or payment, and any certificate issued is registered in the name of the nominee of the Depository or in such other name as is requested by an authorized representative of the Depository (and any payment is made to the nominee of the Depository or to such other entity as is requested by an authorized representative of the Depository), ANY TRANSFER, PLEDGE, OR OTHER USE HEREOF FOR VALUE OR OTHERWISE BY OR TO ANY PERSON IS WRONGFUL inasmuch as the registered owner hereof, the nominee of the Depository, has an interest herein.”
CFR PART 200 Domestic Preferences for Procurements As appropriate and to the extent consistent with law, the non-Federal entity should, to the greatest extent practicable under a Federal award, provide a preference for the purchase, acquisition, or use of goods, products, or materials produced in the United States (including but not limited to iron, aluminum, steel, cement, and other manufactured products). The requirements of this section must be included in all subawards including all contracts and purchase orders for work or products under this award. For purposes of 2 CFR Part 200.322, “Produced in the United States” means, for iron and steel products, that all manufacturing processes, from the initial melting stag through the application of coatings, occurred in the United States. Moreover, for purposes of 2 CFR Part 200.322, “Manufactured products” means items and construction materials composed in whole or in part of non-ferrous metals such as aluminum, plastics and polymer-based products such as polyvinyl chloride pipe, aggregates such as concrete, class, including optical fiber, and lumber. Pursuant to the above, when federal funds are expended by ESC Region 8 and TIPS Members, Vendor certifies that to the greatest extent practicable Vendor will provide a preference for the purchase, acquisition, or use of goods, products, or materials produced in the United States (including but not limited to iron, aluminum, steel, cement, and other manufactured products). Does vendor agree? Yes
Public Offering of the Notes The Representatives hereby advise the Company that the Underwriters intend to offer for sale to the public, as described in the Disclosure Package and the Prospectus, their respective portions of the Notes as soon after the Execution Time as the Representatives, in their sole judgment, have determined is advisable and practicable.
Issuance and Sale of Common Shares Section 2.01 (a)
200 Domestic Preferences for Procurements As appropriate and to the extent consistent with law, the non-Federal entity should, to the greatest extent practicable under a Federal award, provide a preference for the purchase, acquisition, or use of goods, products, or materials produced in the United States (including but not limited to iron, aluminum, steel, cement, and other manufactured products). The requirements of this section must be included in all subawards including all contracts and purchase orders for work or products under this award. For purposes of 2 CFR Part 200.322, “Produced in the United States” means, for iron and steel products, that all manufacturing processes, from the initial melting stag through the application of coatings, occurred in the United States. Moreover, for purposes of 2 CFR Part 200.322, “Manufactured products” means items and construction materials composed in whole or in part of non-ferrous metals such as aluminum, plastics and polymer-based products such as polyvinyl chloride pipe, aggregates such as concrete, glass, including optical fiber, and lumber. Pursuant to the above, when federal funds are expended by ESC Region 8 and TIPS Members, Vendor certifies that to the greatest extent practicable Vendor will provide a preference for the purchase, acquisition, or use of goods, products, or materials produced in the United States (including but not limited to iron, aluminum, steel, cement, and other manufactured products). Does vendor agree? Yes
