Part Identification. All items within the kit, set, installation hardware or material shall be suitably segregated and identified within the unit pack(s) or shipping container by part number and/or national stock number. Refer to the above cited MIL-STD for marking of assorted (related-unrelated) items. D-247-W001 PROHIBITED PACKING MATERIALS (NAVSEA) (OCT 2018) The use of asbestos, excelsior, newspaper or shredded paper (all types including waxed paper, computer paper and similar hygroscopic or non-neutral material) is prohibited. In addition, the use of yellow wrapping or packaging material is prohibited except where used for the containment of radioactive material. Loose fill polystyrene is prohibited for shipboard use. Section E - Inspection and Acceptance INSPECTION AND ACCEPTANCE TERMS Supplies/services will be inspected/accepted at: ▇▇▇▇ INSPECT AT INSPECT BY ACCEPT AT ACCEPT BY 0001 N/A N/A N/A N/A 0002 N/A N/A N/A N/A 0002AA Destination Government Destination Government 0002AB Destination Government Destination Government 0002AC Destination Government Destination Government 0002AD Destination Government Destination Government 0003 N/A N/A N/A N/A 0003AA Destination Government Destination Government 0003AB Destination Government Destination Government 0003AC Destination Government Destination Government 0003AD Destination Government Destination Government 0004 N/A N/A N/A N/A 0004AA Destination Government Destination Government 0004AB Destination Government Destination Government 0004AC Destination Government Destination Government 0004AD Destination Government Destination Government 0005 Destination Government Destination Government 0006 Destination Government Destination Government 0007 Destination Government Destination Government 0008 Destination Government Destination Government 0009 Destination Government Destination Government 0010 Destination Government Destination Government 0011 Destination Government Destination Government 0012 Destination Government Destination Government 0013 Destination Government Destination Government 0014 Destination Government Destination Government 0015 Destination Government Destination Government 0016 Destination Government Destination Government 0017 Destination Government Destination Government 0018 Destination Government Destination Government 0019 Destination Government Destination Government 0020 Destination Government Destination Government 0021 Destination Government Destination Government 0022 Destination Government Destination Government CLAUSES INCORPORATED BY REFERENCE 52.246-2 Inspection Of Supplies--Fixed Price AUG 1996 52.246-16 Responsibility For Supplies APR 1984 CLAUSES INCORPORATED BY FULL TEXT 52.246-11 HIGHER-LEVEL CONTRACT QUALITY REQUIREMENT (DEC 2014) (a) The Contractor shall comply with the higher-level quality standard(s) listed below. ANSI/ASQC Q9001 or ISO 9001 (b) The Contractor shall include applicable requirements of the higher-level quality standard(s) listed in paragraph (a) of this clause and the requirement to flow down such standards, as applicable, to lower-tier subcontracts, in-- (1) Any subcontract for critical and complex items (see 46.203(b) and (c)); or (2) When the technical requirements of a subcontract require-- (i) Control of such things as design, work operations, in-process control, testing, and inspection; or (ii) Attention to such factors as organization, planning, work instructions, documentation control, and advanced metrology. (End of clause) CLAUSES INCORPORATED BY FULL TEXT E-246-H013 INSPECTION AND ACCEPTANCE OF DATA (NAVSEA) (OCT 2018) Inspection and acceptance of all data shall be as specified on the attached Contract Data Requirements List(s), DD Form 1423. CLAUSES INCORPORATED BY FULL TEXT E-246-H016 INSPECTION AND ACCEPTANCE OF F.O.B. DESTINATION DELIVERIES (NAVSEA) (OCT 2018) Item(s) 0002-0022 - Inspection and acceptance shall be made at destination by a representative of the Government. E-246-H020 QUALITY MANAGEMENT SYSTEM REQUIREMENTS (NAVSEA) (OCT 2018) The Contractor shall provide and maintain a quality management system that, as a minimum, adheres to the requirements of ASQ/ANSI/ISO 9001:2015 “Quality Management Systems – Requirements” and supplemental requirements imposed by this contract. The quality management system procedures, planning, and all other documentation and data that comprise the quality management system shall be made available to the Government for review. Existing quality documents that meet the requirements of this contract may continue to be used. The Government may perform any necessary inspections, verifications, and evaluations to ascertain conformance to requirements and the adequacy of the implementing procedures. The Contractor shall flow down such standards, as applicable, to lower-tier subcontractors under instances covered in FAR 52.246-11(b) or at the direction of the Contracting Officer. The Government reserves the right to disapprove the quality management system or portions thereof when it fails to meet the contractual requirements. CLAUSES INCORPORATED BY FULL TEXT E-246-H022 INSPECTION AND TEST RECORDS (NAVSEA) (JAN 2019) Inspection and test records shall, as a minimum, indicate the nature of the observations, number of observations made, and the number and type of deficiencies found. Data included in inspection and test records shall be complete and accurate, and shall be used for trend analysis and to assess corrective action and effectiveness. The data shall, on request, be identified and made available for on-site review by the Contracting Officer or designated Government representative. CLAUSES INCORPORATED BY FULL TEXT E-246-W002 CERTIFICATE OF COMPLIANCE (NAVSEA) (OCT 2018) (a) A certification of material shall be provided by the Contractor, one (1) copy to accompany the shipment (in the packing list envelope) and (l) copy mailed to arrive at time of receipt of the shipment. Mark all certificates to the attention of Code 00Q. (b) The certificate shall state compliance of material with drawing specification and contract/order requirements. The certificate shall as a minimum state the company name, contract/order number, drawing or specification number, and date. The certificate shall state, above the signature of a legally authorized representative of the company, the following: This certification concerns a matter within the jurisdiction of an agency of the United States and the making of a false, fictitious, or fraudulent certification may render the maker subject to prosecution under Title 18, United States Code, Section 1001. (c) Failure to provide certification at the time of shipment may result in material being rejected and returned at the contractor's expense. (d) The certificate shall read as follows: I certify that on [insert date], the [insert Contractor’s name] furnished the supplies called for by the Order/Contract No. via [Carrier] on [identify the bill of lading or shipping document] in accordance with all applicable requirements. I further certify that the supplies or services are of the quality specified and conform in all respects with the contract requirements, including specifications, drawings, preservation, packaging, packing, marking requirements, and physical item identification (part number), and are in the quantity shown on this document.
Appears in 3 contracts
Part Identification. All items within the kit, set, installation hardware or material shall be suitably segregated and identified within the unit pack(s) or shipping container by part number and/or national stock number. Refer to the above cited MIL-STD for marking of assorted (related-unrelated) items. D-247-W001 PROHIBITED PACKING MATERIALS (NAVSEA) (OCT 2018) The use of asbestos, excelsior, newspaper or shredded paper (all types including waxed paper, computer paper and similar hygroscopic or non-neutral material) is prohibited. In addition, the use of yellow wrapping or packaging material is prohibited except where used for the containment of radioactive material. Loose fill polystyrene is prohibited for shipboard use. Section E - Inspection and Acceptance INSPECTION AND ACCEPTANCE TERMS Supplies/services will be inspected/accepted at: ▇▇▇▇ INSPECT AT INSPECT BY ACCEPT AT ACCEPT BY 0001 N/A N/A N/A N/A Destination Government Destination Government 0002 N/A N/A N/A N/A 0002AA Destination Government Destination Government 0002AB Destination Government Destination Government 0002AC Destination Government Destination Government 0002AD Destination Government Destination Government 0003 N/A N/A N/A N/A 0003AA Destination Government Destination Government 0003AB Destination Government Destination Government 0003AC Destination Government Destination Government 0003AD Destination Government Destination Government 0004 N/A N/A N/A N/A 0004AA Destination Government Destination Government 0004AB Destination Government Destination Government 0004AC Destination Government Destination Government 0004AD Destination Government Destination Government 0005 Destination Government Destination Government 0006 Destination Government Destination Government 0007 Destination Government Destination Government 0008 Destination Government Destination Government 0009 Destination Government Destination Government 0010 Destination Government Destination Government 0011 Destination Government Destination Government 0012 Destination Government Destination Government 0013 Destination Government Destination Government 0014 Destination Government Destination Government 0015 Destination Government Destination Government 0016 Destination Government Destination Government 0017 Destination Government Destination Government 0018 Destination Government Destination Government 0019 Destination Government Destination Government 0020 Destination Government Destination Government 0021 Destination Government Destination Government 0022 Destination Government Destination Government 0023 Destination Government Destination Government 0024 Destination Government Destination Government 0025 Destination Government Destination Government 0026 Destination Government Destination Government 0027 Destination Government Destination Government 0028 Destination Government Destination Government 0029 Destination Government Destination Government 0030 Destination Government Destination Government 0031 Destination Government Destination Government 0032 Destination Government Destination Government 0033 Destination Government Destination Government 0034 Destination Government Destination Government 0035 Destination Government Destination Government 0036 Destination Government Destination Government 0037 Destination Government Destination Government 0038 Destination Government Destination Government 0039 Destination Government Destination Government 0040 Destination Government Destination Government 0041 Destination Government Destination Government 0042 Destination Government Destination Government 0043 Destination Government Destination Government CLAUSES INCORPORATED BY REFERENCE 52.246-2 Inspection Of Supplies--Fixed Price AUG 1996 52.246-16 Responsibility For Supplies APR 1984 252.217-7005 Inspection and ▇▇▇▇▇▇ of Doing Work JUL 2009 252.217-7013 Guarantees DEC 1991 CLAUSES INCORPORATED BY FULL TEXT 52.246E-246-11 HIGHER-LEVEL CONTRACT QUALITY REQUIREMENT H010 TESTS AND TRIALS--BASIC (DEC 2014)
NAVSEA) (aOCT 2018) During the conduct of required tests and trials, the vessel shall be under the control of the vessel's Commander and crew with representatives of the Contractor and the Government on board to determine whether or not the work done by the Contractor has been satisfactorily performed. The Contractor shall comply with provide and install all fittings and appliances which may be necessary for dock and sea trials to enable the higher-level quality standard(s) listed below. ANSI/ASQC Q9001 or ISO 9001
(b) The Contractor shall include applicable representatives of the Government to determine whether the requirements of the higher-level quality standard(s) listed in paragraph
(a) of this clause contract have been met, and the requirement to flow down Contractor shall install and remove instruments and apparatus furnished by the Government for such standardstrials, as applicable, to lower-tier subcontracts, in--
(1) Any subcontract for critical and complex items (see 46.203(b) and (c)); or
(2) When required by the technical requirements of a subcontract require--
(i) Control of such things as design, work operations, in-process control, testing, and inspection; or
(ii) Attention to such factors as organization, planning, work instructions, documentation control, and advanced metrologyspecifications. (End of clause) CLAUSES INCORPORATED BY FULL TEXT E-246-H013 INSPECTION AND ACCEPTANCE OF DATA (NAVSEA) (OCT 2018) Inspection and acceptance of all data shall be as specified on the attached Contract Data Requirements List(s), DD Form 1423. CLAUSES INCORPORATED BY FULL TEXT E-246-H016 INSPECTION AND ACCEPTANCE OF F.O.B. DESTINATION DELIVERIES (NAVSEA) (OCT 2018) Item(s) 0002-0022 CLINs 0001 - 0043 - Inspection and acceptance shall be made at destination by a representative of the Government. E-246-H020 QUALITY MANAGEMENT SYSTEM REQUIREMENTS (NAVSEA) (OCT 2018) The Contractor shall provide and maintain a quality management system that, as a minimum, adheres to the requirements of ASQ/ANSI/ISO 9001:2015 “Quality Management Systems – Requirements” and supplemental requirements imposed by this contract. The quality management system procedures, planning, and all other documentation and data that comprise the quality management system shall be made available to the Government for review. Existing quality documents that meet the requirements of this contract may continue to be used. The Government may perform any necessary inspections, verifications, and evaluations to ascertain conformance to requirements and the adequacy of the implementing procedures. The Contractor shall flow down such standards, as applicable, to lower-tier subcontractors under instances covered in FAR 52.246-11(b) or at the direction of the Contracting Officer. The Government reserves the right to disapprove the quality management system or portions thereof when it fails to meet the contractual requirements. CLAUSES INCORPORATED BY FULL TEXT E-246-H022 INSPECTION AND TEST RECORDS (NAVSEA) (JAN 2019) Inspection and test records shall, as a minimum, indicate the nature of the observations, number of observations made, and the number and type of deficiencies found. Data included in inspection and test records shall be complete and accurate, and shall be used for trend analysis and to assess corrective action and effectiveness. The data shall, on request, be identified and made available for on-site review by the Contracting Officer or designated Government representative. CLAUSES INCORPORATED BY FULL TEXT E-246-W002 CERTIFICATE OF COMPLIANCE (NAVSEA) (OCT 2018)
(a) A certification of material shall be provided by the Contractor, one (1) copy to accompany the shipment (in the packing list envelope) and (l) copy mailed to arrive at time of receipt of the shipment. Mark all certificates to the attention of Code 00Q.
(b) The certificate shall state compliance of material with drawing specification and contract/order requirements. The certificate shall as a minimum state the company name, contract/order number, drawing or specification number, and date. The certificate shall state, above the signature of a legally authorized representative of the company, the following: This certification concerns a matter within the jurisdiction of an agency of the United States and the making of a false, fictitious, or fraudulent certification may render the maker subject to prosecution under Title 18, United States Code, Section 1001.
(c) Failure to provide certification at the time of shipment may result in material being rejected and returned at the contractor's expense.
(d) The certificate shall read as follows: I certify that on [insert date], the [insert Contractor’s name] furnished the supplies called for by the Order/Contract No. via [Carrier] on [identify the bill of lading or shipping document] in accordance with all applicable requirements. I further certify that the supplies or services are of the quality specified and conform in all respects with the contract requirements, including specifications, drawings, preservation, packaging, packing, marking requirements, and physical item identification (part number), and are in the quantity shown on this document.
Appears in 2 contracts
Sources: Solicitation, Offer and Award, Contract
Part Identification. All items within the kit, set, installation hardware or material shall be suitably segregated and identified within the unit pack(s) or shipping container by part number and/or national stock number. Refer to the above cited MIL-STD for marking of assorted (related-unrelated) items. D-247-W001 PROHIBITED PACKING MATERIALS (NAVSEA) (OCT 2018) The use of asbestos, excelsior, newspaper or shredded paper (all types including waxed paper, computer paper and similar hygroscopic or non-neutral material) is prohibited. In addition, the use of yellow wrapping or packaging material is prohibited except where used for the containment of radioactive material. Loose fill polystyrene is prohibited for shipboard use. Section E - Inspection and Acceptance INSPECTION AND ACCEPTANCE TERMS Supplies/services will be inspected/accepted at: ▇▇▇▇ INSPECT AT INSPECT BY ACCEPT AT ACCEPT BY 0001 N/A N/A N/A N/A 0002 N/A N/A N/A N/A 0002AA Destination Government Destination Government 0002AB Destination Government Destination Government 0002AC Destination Government Destination Government 0002AD Destination Government Destination Government 0003 N/A N/A N/A N/A 0003AA Destination Government Destination Government 0003AB Destination Government Destination Government 0003AC Destination Government Destination Government 0003AD Destination Government Destination Government 0004 N/A N/A N/A N/A 0004AA Destination Government Destination Government 0004AB Destination Government Destination Government 0004AC Destination Government Destination Government 0004AD Destination Government Destination Government 0005 Destination Government Destination Government 0006 Destination Government Destination Government 0007 Destination Government Destination Government 0008 Destination Government Destination Government 0009 Destination Government Destination Government 0010 Destination Government Destination Government 0011 Destination Government Destination Government 0012 Destination Government Destination Government 0013 Destination Government Destination Government 0014 Destination Government Destination Government 0015 Destination Government Destination Government 0016 Destination Government Destination Government 0017 Destination Government Destination Government 0018 Destination Government Destination Government 0019 Destination Government Destination Government 0020 Destination Government Destination Government 0021 Destination Government Destination Government 0022 Destination Government Destination Government CLAUSES INCORPORATED BY REFERENCE 52.246-2 Inspection Of Supplies--Fixed Price AUG 1996 52.246-16 Responsibility For Supplies APR 1984 CLAUSES INCORPORATED BY FULL TEXT 52.246-11 HIGHER-LEVEL CONTRACT QUALITY REQUIREMENT (DEC 2014)
(a) The Contractor shall comply with the higher-level quality standard(s) listed below. ANSI/ASQC Q9001 or ISO 9001
(b) The Contractor shall include applicable requirements of the higher-level quality standard(s) listed in paragraph
(a) of this clause and the requirement to flow down such standards, as applicable, to lower-tier subcontracts, in--
(1) Any subcontract for critical and complex items (see 46.203(b) and (c)); or
(2) When the technical requirements of a subcontract require--
(i) Control of such things as design, work operations, in-process control, testing, and inspection; or
(ii) Attention to such factors as organization, planning, work instructions, documentation control, and advanced metrology. (End of clause) CLAUSES INCORPORATED BY FULL TEXT E-246-H013 INSPECTION AND ACCEPTANCE OF DATA (NAVSEA) (OCT 2018) Inspection and acceptance of all data shall be as specified on the attached Contract Data Requirements List(s), DD Form 1423. CLAUSES INCORPORATED BY FULL TEXT E-246-H016 INSPECTION AND ACCEPTANCE OF F.O.B. DESTINATION DELIVERIES (NAVSEA) (OCT 2018) Item(s) 0002-0022 - Inspection and acceptance shall be made at destination by a representative of the Government. E-246-H020 QUALITY MANAGEMENT SYSTEM REQUIREMENTS (NAVSEA) (OCT 2018) The Contractor shall provide and maintain a quality management system that, as a minimum, adheres to the requirements of ASQ/ANSI/ISO 9001:2015 “Quality Management Systems – Requirements” and supplemental requirements imposed by this contract. The quality management system procedures, planning, and all other documentation and data that comprise the quality management system shall be made available to the Government for review. Existing quality documents that meet the requirements of this contract may continue to be used. The Government may perform any necessary inspections, verifications, and evaluations to ascertain conformance to requirements and the adequacy of the implementing procedures. The Contractor shall flow down such standards, as applicable, to lower-tier subcontractors under instances covered in FAR 52.246-11(b) or at the direction of the Contracting Officer. The Government reserves the right to disapprove the quality management system or portions thereof when it fails to meet the contractual requirements. CLAUSES INCORPORATED BY FULL TEXT E-246-H022 INSPECTION AND TEST RECORDS (NAVSEA) (JAN 2019) Inspection and test records shall, as a minimum, indicate the nature of the observations, number of observations made, and the number and type of deficiencies found. Data included in inspection and test records shall be complete and accurate, and shall be used for trend analysis and to assess corrective action and effectiveness. The data shall, on request, be identified and made available for on-site review by the Contracting Officer or designated Government representative. CLAUSES INCORPORATED BY FULL TEXT E-246-W002 CERTIFICATE OF COMPLIANCE (NAVSEA) (OCT 2018)
(a) A certification of material shall be provided by the Contractor, one (1) copy to accompany the shipment (in the packing list envelope) and (l) copy mailed to arrive at time of receipt of the shipment. Mark all certificates to the attention of Code 00Q.
(b) The certificate shall state compliance of material with drawing specification and contract/order requirements. The certificate shall as a minimum state the company name, contract/order number, drawing or specification number, and date. The certificate shall state, above the signature of a legally authorized representative of the company, the following: This certification concerns a matter within the jurisdiction of an agency of the United States and the making of a false, fictitious, or fraudulent certification may render the maker subject to prosecution under Title 18, United States Code, Section 1001.
(c) Failure to provide certification at the time of shipment may result in material being rejected and returned at the contractor's expense.
(d) The certificate shall read as follows: I certify that on [insert date], the [insert Contractor’s name] furnished the supplies called for by the Order/Contract No. via [Carrier] on [identify the bill of lading or shipping document] in accordance with all applicable requirements. I further certify that the supplies or services are of the quality specified and conform in all respects with the contract requirements, including specifications, drawings, preservation, packaging, packing, marking requirements, and physical item identification (part number), and are in the quantity shown on this document.
Appears in 2 contracts
Part Identification. All items within the kit, set, installation hardware or material shall be suitably segregated and identified within the unit pack(s) or shipping container by part number and/or national stock number. Refer to the above cited MIL-STD for marking of assorted (related-unrelated) items. D-247-W001 PROHIBITED PACKING MATERIALS (NAVSEA) (OCT 2018) The use of asbestos, excelsior, newspaper or shredded paper (all types including waxed paper, computer paper and similar hygroscopic or non-neutral material) is prohibited. In addition, the use of yellow wrapping or packaging material is prohibited except where used for the containment of radioactive material. Loose fill polystyrene is prohibited for shipboard use. Section E - Inspection and Acceptance INSPECTION/ACCEPTANCE (REV.) INSPECTION AND ACCEPTANCE TERMS Supplies/services will be inspected/accepted at: ▇▇▇▇ INSPECT AT INSPECT BY ACCEPT AT ACCEPT BY 0001 N/A N/A N/A N/A 0002 N/A N/A N/A N/A 0002AA Destination Government Destination Government 0002AB Destination Government Destination Government 0002AC Destination Government Destination Government 0002AD 0002 Destination Government Destination Government 0003 N/A N/A N/A N/A 0003AA Destination Government Destination Government 0003AB Destination Government Destination Government 0003AC Destination Government Destination Government 0003AD Destination Government Destination Government 0004 N/A N/A N/A N/A 0004AA Destination Government Destination Government 0004AB Destination Government Destination Government 0004AC Destination Government Destination Government 0004AD Destination Government Destination Government 0005 Destination Government Destination Government 0006 Destination Government Destination Government 0007 Destination Government Destination Government 0008 Destination Government Destination Government 0009 Destination Government Destination Government 0010 Destination Government Destination Government 0011 Destination Government Destination Government 0012 Destination Government Destination Government 0013 Destination Government Destination Government 0014 Destination Government Destination Government 0015 Destination Government Destination Government 0016 Destination Government Destination Government 0017 Destination Government Destination Government 0018 Destination Government Destination Government 0019 Destination Government Destination Government 0020 Destination Government Destination Government 0021 Destination Government Destination Government 0022 Destination Government Destination Government 0023 Destination Government Destination Government 0024 Destination Government Destination Government 0025 Destination Government Destination Government 0026 Destination Government Destination Government 0027 Destination Government Destination Government 0028 Destination Government Destination Government 0029 Destination Government Destination Government 0030 Destination Government Destination Government 0031 Destination Government Destination Government 0032 Destination Government Destination Government 0033 Destination Government Destination Government 0034 Destination Government Destination Government 0035 Destination Government Destination Government 0036 Destination Government Destination Government 0037 Destination Government Destination Government 0038 Destination Government Destination Government 0039 Destination Government Destination Government 0040 Destination Government Destination Government 0041 Destination Government Destination Government 0042 Destination Government Destination Government 0043 Destination Government Destination Government 0044 Destination Government Destination Government 0045 Destination Government Destination Government 0046 Destination Government Destination Government 0047 Destination Government Destination Government 0048 N/A N/A N/A N/A 1001 Destination Government Destination Government 2001 Destination Government Destination Government 3001 Destination Government Destination Government 4001 Destination Government Destination Government 5001 Destination Government Destination Government CLAUSES INCORPORATED BY REFERENCE 52.246-2 Inspection Of Supplies--Fixed Price AUG 1996 52.246-15 Certificate of Conformance APR 1984 52.246-16 Responsibility For Supplies APR 1984 CLAUSES INCORPORATED BY FULL TEXT 52.246-11 HIGHER-LEVEL CONTRACT QUALITY REQUIREMENT (DEC 2014)
(a) The Contractor shall comply with the higher-level quality standard(s) listed below. ANSI/ASQC Q9001 or ISO 9001
(b) The Contractor shall include applicable requirements of the higher-level quality standard(s) listed in paragraph
(a) of this clause and the requirement to flow down such standards, as applicable, to lower-tier subcontracts, in--
(1) Any subcontract for critical and complex items (see 46.203(b) and (c)); or
(2) When the technical requirements of a subcontract require--
(i) Control of such things as design, work operations, in-process control, testing, and inspection; or
(ii) Attention to such factors as organization, planning, work instructions, documentation control, and advanced metrology. (End of clause) CLAUSES INCORPORATED BY FULL TEXT E-246-H013 INSPECTION AND ACCEPTANCE OF DATA (NAVSEA) (OCT 2018) Inspection and acceptance of all data shall be as specified on the attached Contract Data Requirements List(s), DD Form 1423. CLAUSES INCORPORATED BY FULL TEXT E-246-H016 INSPECTION AND ACCEPTANCE OF F.O.B. DESTINATION DELIVERIES (NAVSEA) (OCT 2018) Item(s) 0002-0022 CLINs 0001 – 5046 - Inspection and acceptance shall be made at destination by a representative of the Government. E-246-H020 QUALITY MANAGEMENT SYSTEM REQUIREMENTS (NAVSEA) (OCT 2018) The Contractor shall provide and maintain a quality management system that, as a minimum, adheres to the requirements of ASQ/ANSI/ISO 9001:2015 “Quality Management Systems – Requirements” and supplemental requirements imposed by this contractcontract or an equivalent quality system model. The quality management system procedures, planning, and all other documentation and data that comprise the quality management system shall be made available to the Government for review. Existing quality documents that meet the requirements of this contract may continue to be used. The Government may perform any necessary inspections, verifications, and evaluations to ascertain conformance to requirements and the adequacy of the implementing procedures. The Contractor shall flow down such standards, as applicable, to lower-tier subcontractors under instances covered in FAR 52.246-11(b) or at the direction of the Contracting Officer. The Government reserves the right to disapprove the quality management system or portions thereof when it fails to meet the contractual requirements. CLAUSES INCORPORATED BY FULL TEXT E-246-H022 INSPECTION AND TEST RECORDS (NAVSEA) (JAN 2019) Inspection and test records shall, as a minimum, indicate the nature of the observations, number of observations made, and the number and type of deficiencies found. Data included in inspection and test records shall be complete and accurate, and shall be used for trend analysis and to assess corrective action and effectiveness. The data shall, on request, be identified and made available for on-site review by the Contracting Officer or designated Government representative. Section F - Deliveries or Performance DELIVERY INFORMATION (REVISED) DELIVERY INFORMATION CLIN DELIVERY DATE QUANTITY SHIP TO ADDRESS DODAAC / CAGE 0001 90 Days After Receipt of Delivery Order To be cited on each Delivery Order NAVAL SURFACE WARFARE CENTER CRANE DIV M/F: ▇▇▇▇▇▇▇ ▇▇▇▇▇ (BLDG 3209) 41 SE CENTRAL RECEIVING 300 HWY 361CRANE IN 47522812-854-1322FOB: Destination N00164 0002 90 Days After Receipt of Delivery Order To be cited on each Delivery Order (SAME AS PREVIOUS LOCATION)FOB: Destination N00164 0003 90 Days After Receipt of Delivery Order To be cited on each Delivery Order (SAME AS PREVIOUS LOCATION)FOB: Destination N00164 0004 90 Days After Receipt of Delivery Order To be cited on each Delivery Order (SAME AS PREVIOUS LOCATION)FOB: Destination N00164 0005 90 Days After Receipt of Delivery Order To be cited on each Delivery Order (SAME AS PREVIOUS LOCATION)FOB: Destination N00164 0006 90 Days After Receipt of Delivery Order To be cited on each Delivery Order (SAME AS PREVIOUS LOCATION)FOB: Destination N00164 0007 90 Days After Receipt of Delivery Order To be cited on each Delivery Order (SAME AS PREVIOUS LOCATION)FOB: Destination N00164 0008 90 Days After Receipt of Delivery Order To be cited on each Delivery Order (SAME AS PREVIOUS LOCATION)FOB: Destination N00164 0009 90 Days After Receipt of Delivery Order To be cited on each Delivery Order (SAME AS PREVIOUS LOCATION)FOB: Destination N00164 0010 90 Days After Receipt of Delivery Order To be cited on each Delivery Order (SAME AS PREVIOUS LOCATION)FOB: Destination N00164 0011 90 Days After Receipt of Delivery Order To be cited on each Delivery Order (SAME AS PREVIOUS LOCATION)FOB: Destination N00164 0012 90 Days After Receipt of Delivery Order To be cited on each (SAME AS PREVIOUS LOCATION) Delivery Order FOB: Destination N00164 0013 90 Days After Receipt of Delivery Order To be cited on each (SAME AS PREVIOUS LOCATION) Delivery Order FOB: Destination N00164 0014 90 Days After Receipt of Delivery Order To be cited on each (SAME AS PREVIOUS LOCATION) Delivery Order FOB: Destination N00164 0015 90 Days After Receipt of Delivery Order To be cited on each (SAME AS PREVIOUS LOCATION) Delivery Order FOB: Destination N00164 0016 90 Days After Receipt of Delivery Order To be cited on each (SAME AS PREVIOUS LOCATION) Delivery Order FOB: Destination N00164 0017 90 Days After Receipt of Delivery Order To be cited on each (SAME AS PREVIOUS LOCATION) Delivery Order FOB: Destination N00164 0018 90 Days After Receipt of Delivery Order To be cited on each (SAME AS PREVIOUS LOCATION) Delivery Order FOB: Destination N00164 0019 90 Days After Receipt of Delivery Order To be cited on each (SAME AS PREVIOUS LOCATION) Delivery Order FOB: Destination N00164 0020 90 Days After Receipt of Delivery Order To be cited on each (SAME AS PREVIOUS LOCATION) Delivery Order FOB: Destination N00164 0021 90 Days After Receipt of Delivery Order To be cited on each (SAME AS PREVIOUS LOCATION) Delivery Order FOB: Destination N00164 0022 90 Days After Receipt of Delivery Order To be cited on each (SAME AS PREVIOUS LOCATION) Delivery Order FOB: Destination N00164 0023 90 Days After Receipt of Delivery Order To be cited on each (SAME AS PREVIOUS LOCATION) Delivery Order FOB: Destination N00164 0024 90 Days After Receipt of Delivery Order To be cited on each (SAME AS PREVIOUS LOCATION) Delivery Order FOB: Destination N00164 0025 90 Days After Receipt of Delivery Order To be cited on each (SAME AS PREVIOUS LOCATION) Delivery Order FOB: Destination N00164 0026 90 Days After Receipt of Delivery Order To be cited on each (SAME AS PREVIOUS LOCATION) Delivery Order FOB: Destination N00164 0027 90 Days After Receipt of Delivery Order To be cited on each (SAME AS PREVIOUS LOCATION) Delivery Order FOB: Destination N00164 0028 90 Days After Receipt of Delivery Order To be cited on each (SAME AS PREVIOUS LOCATION) Delivery Order FOB: Destination N00164 0029 90 Days After Receipt of Delivery Order To be cited on each (SAME AS PREVIOUS LOCATION) Delivery Order FOB: Destination N00164 0030 90 Days After Receipt of Delivery Order To be cited on each (SAME AS PREVIOUS LOCATION) Delivery Order FOB: Destination N00164 0031 90 Days After Receipt of Delivery Order To be cited on each (SAME AS PREVIOUS LOCATION) Delivery Order FOB: Destination N00164 0032 90 Days After Receipt of Delivery Order To be cited on each (SAME AS PREVIOUS LOCATION) Delivery Order FOB: Destination N00164 0033 90 Days After Receipt of Delivery Order To be cited on each (SAME AS PREVIOUS LOCATION) Delivery Order FOB: Destination N00164 0034 90 Days After Receipt of Delivery Order To be cited on each (SAME AS PREVIOUS LOCATION) Delivery Order FOB: Destination N00164 0035 90 Days After Receipt of Delivery Order To be cited on each (SAME AS PREVIOUS LOCATION) Delivery Order FOB: Destination N00164 0036 90 Days After Receipt of Delivery Order To be cited on each (SAME AS PREVIOUS LOCATION) Delivery Order FOB: Destination N00164 0037 90 Days After Receipt of Delivery Order To be cited on each (SAME AS PREVIOUS LOCATION) Delivery Order FOB: Destination N00164 0038 90 Days After Receipt of Delivery Order To be cited on each (SAME AS PREVIOUS LOCATION) Delivery Order FOB: Destination N00164 0039 90 Days After Receipt of Delivery Order To be cited on each (SAME AS PREVIOUS LOCATION) Delivery Order FOB: Destination N00164 0040 90 Days After Receipt of Delivery Order To be cited on each (SAME AS PREVIOUS LOCATION) Delivery Order FOB: Destination N00164 0041 90 Days After Receipt of Delivery Order To be cited on each (SAME AS PREVIOUS LOCATION) Delivery Order FOB: Destination N00164 0042 90 Days After Receipt of Delivery Order To be cited on each (SAME AS PREVIOUS LOCATION) Delivery Order FOB: Destination N00164 0043 90 Days After Receipt of Delivery Order To be cited on each (SAME AS PREVIOUS LOCATION) Delivery Order FOB: Destination N00164 0044 90 Days After Receipt of Delivery Order To be cited on each (SAME AS PREVIOUS LOCATION) Delivery Order FOB: Destination N00164 0045 90 Days After Receipt of Delivery Order To be cited on each (SAME AS PREVIOUS LOCATION) Delivery Order FOB: Destination N00164 0046 90 Days After Receipt of Delivery Order To be cited on each Delivery Order (SAME AS PREVIOUS LOCATION)FOB: Destination N00164 0047 IAW DD1423s 1 Lot IAW DD1423s N00164 0048 N/A N/A N/A N/A 1001- 90 Days After Receipt of To be cited on each NAVAL SURFACE WARFARE CENTER N00164 1046 Delivery Order Delivery Order CRANE DIVM/F: ▇▇▇▇▇▇▇ ▇▇▇▇▇ (BLDG 3209) 41 SE CENTRAL RECEIVING 300 HWY 361CRANE IN 47522812-854-1322FOB: Destination 2001- 90 Days After Receipt of To be cited on each (SAME AS PREVIOUS LOCATION) N00164 2046 Delivery Order Delivery Order FOB: Destination 3001- 90 Days After Receipt of To be cited on each (SAME AS PREVIOUS LOCATION) N00164 3046 Delivery Order Delivery Order FOB: Destination 4001- 90 Days After Receipt of To be cited on each (SAME AS PREVIOUS LOCATION) N00164 4046 Delivery Order Delivery Order FOB: Destination 5001- 90 Days After Receipt of To be cited on each (SAME AS PREVIOUS LOCATION) N00164 5046 Delivery Order Delivery Order FOB: Destination CLAUSES INCORPORATED BY REFERENCE 52.242-15 Stop-Work Order AUG 1989 52.242-17 Government Delay Of Work APR 1984 52.247-34 F.O.B. Destination NOV 1991 52.247-55 F.O.B. Point For Delivery Of Government-Furnished JUN 2003 Property CLAUSES INCORPORATED BY FULL TEXT E-24652.211-W002 CERTIFICATE 8 TIME OF COMPLIANCE DELIVERY (JUN 1997)
(a) The Government requires delivery to be made according to the following schedule: REQUIRED DELIVERY SCHEDULE Within Days 90 days after date of Delivery Order After Date Item No. Quantity of Contract CLINs 0001 - 5046 The Government will evaluate equally, as regards time of delivery, offers that propose delivery of each quantity within the applicable delivery period specified above. Offers that propose delivery that will not clearly fall within the applicable required delivery period specified above, will be considered nonresponsive and rejected. The Government reserves the right to award under either the required delivery schedule or the proposed delivery schedule, when an offeror offers an earlier delivery schedule than required above. If the offeror proposes no other delivery schedule, the required delivery schedule above will apply. ▇▇▇▇▇▇▇'S PROPOSED DELIVERY SCHEDULE Within Days After Date Item No. Quantity of Contract
(b) Attention is directed to the Contract Award provision of the solicitation that provides that a written award or acceptance of offer mailed, or otherwise furnished to the successful offeror, results in a binding contract. The Government will mail or otherwise furnish to the offeror an award or notice of award not later than the day award is dated. Therefore, the offeror should compute the time available for performance beginning with the actual date of award, rather than the date the written notice of award is received from the Contracting Officer through the ordinary mails. However, the Government will evaluate an offer that proposes delivery based on the Contractor's date of receipt of the contract or notice of award by adding (1) five calendar days for delivery of the award through the ordinary mails, or (2) one working day if the solicitation states that the contract or notice of award will be transmitted electronically. (The term "working day" excludes weekends and U.S. Federal holidays.) If, as so computed, the offered delivery date is later than the required delivery date, the offer will be considered nonresponsive and rejected. (End of clause) CLAUSES INCORPORATED BY FULL TEXT F-247-H001 DELIVERY OF DATA (NAVSEA) (OCT 2018)
(a) A certification of material All data to be furnished under this contract shall be provided by delivered prepaid to the Contractor, one (1) copy to accompany the shipment (in the packing list envelopedestination(s) and (l) copy mailed to arrive at time of receipt of the shipment. Mark all certificates to the attention of Code 00Q.
(b) The certificate shall state compliance of material with drawing specification and contract/order requirements. The certificate shall as a minimum state the company name, contract/order number, drawing or specification number, and date. The certificate shall state, above the signature of a legally authorized representative of the company, the following: This certification concerns a matter within the jurisdiction of an agency of the United States and the making of a false, fictitious, or fraudulent certification may render the maker subject to prosecution under Title 18, United States Code, Section 1001.
(c) Failure to provide certification at the time of shipment may result in material being rejected and returned at time(s) specified on the contractor's expense.
(d) The certificate shall read as follows: I certify that on [insert date], the [insert Contractor’s name] furnished the supplies called for by the Order/Contract No. via [Carrier] on [identify the bill of lading or shipping document] in accordance with all applicable requirements. I further certify that the supplies or services are of the quality specified and conform in all respects with the contract requirements, including specifications, drawings, preservation, packaging, packing, marking requirements, and physical item identification (part numberData Requirements List(s), and are in the quantity shown on this document.DD Form 1423. Section G - Contract Administration Data CLAUSES INCORPORATED BY FULL TEXT 252.232-7006 WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (DEC 2018)
Appears in 1 contract
Sources: Contract
Part Identification. All items within the kit, set, installation hardware or material shall be suitably segregated and identified within the unit pack(s) or shipping container by part number and/or national stock number. Refer to the above cited MIL-STD for marking of assorted (related-unrelated) items. D-247-W001 PROHIBITED PACKING MATERIALS (NAVSEA) (OCT 2018) The use of asbestos, excelsior, newspaper or shredded paper (all types including waxed paper, computer paper and similar hygroscopic or non-neutral material) is prohibited. In addition, the use of yellow wrapping or packaging material is prohibited except where used for the containment of radioactive material. Loose fill polystyrene is prohibited for shipboard use. Section E - Inspection and Acceptance INSPECTION AND ACCEPTANCE TERMS Supplies/services will be inspected/accepted at: ▇▇▇▇ INSPECT AT INSPECT BY ACCEPT AT ACCEPT BY 0001 N/A N/A N/A N/A 0002 N/A N/A N/A N/A 0002AA Destination Government Destination Government 0002AB Destination Government Destination Government 0002AC Destination Government Destination Government 0002AD 0002 Destination Government Destination Government 0003 N/A N/A N/A N/A 0003AA Destination Government Destination Government 0003AB Destination Government Destination Government 0003AC Destination Government Destination Government 0003AD Destination Government Destination Government 0004 N/A N/A N/A N/A 0004AA Destination Government Destination Government 0004AB Destination Government Destination Government 0004AC Destination Government Destination Government 0004AD Destination Government Destination Government 0005 Destination Government Destination Government 0006 Destination Government Destination Government 0007 Destination Government Destination Government 0008 Destination Government Destination Government 0009 Destination Government Destination Government 0010 Destination Government Destination Government 0011 Destination Government Destination Government 0012 Destination Government Destination Government 0013 Destination Government Destination Government 0014 Destination Government Destination Government 0015 Destination Government Destination Government 0016 Destination Government Destination Government 0017 Destination Government Destination Government 0018 Destination Government Destination Government 0019 Destination Government Destination Government 0020 Destination Government Destination Government 0021 Destination Government Destination Government 0022 Destination Government Destination Government CLAUSES INCORPORATED BY REFERENCE 52.246-2 Inspection Of Supplies--Fixed Price AUG 1996 52.246-3 Inspection Of Supplies Cost-Reimbursement MAY 2001 52.246-4 Inspection Of Services--Fixed Price AUG 1996 52.246-5 Inspection Of Services Cost-Reimbursement APR 1984 52.246-16 Responsibility For Supplies APR 1984 CLAUSES INCORPORATED BY FULL TEXT 52.246-11 HIGHER-LEVEL CONTRACT QUALITY REQUIREMENT (DEC 2014)
(a) The Contractor shall comply with the higher-level quality standard(s) listed below. ANSI/ASQC Q9001 or ISO 9001
(b) The Contractor shall include applicable requirements of the higher-level quality standard(s) listed in paragraph
(a) of this clause and the requirement to flow down such standards, as applicable, to lower-tier subcontracts, in--
(1) Any subcontract for critical and complex items (see 46.203(b) and (c)); or
(2) When the technical requirements of a subcontract require--
(i) Control of such things as design, work operations, in-process control, testing, and inspection; or
(ii) Attention to such factors as organization, planning, work instructions, documentation control, and advanced metrology. (End of clause) CLAUSES INCORPORATED BY FULL TEXT E-246-H013 INSPECTION AND ACCEPTANCE OF DATA (NAVSEA) (OCT 2018) Inspection and acceptance of all data shall be as specified on the attached Contract Data Requirements List(s), DD Form 1423. CLAUSES INCORPORATED BY FULL TEXT E-246-H014 INSPECTION AND ACCEPTANCE OF ENGINEERING SERVICES (NAVSEA) (OCT 2018) Item(s) 0001-0002 - Inspection and acceptance shall be made by the Contracting Officer’s Representative (COR) or a designated representative of the Government. E-246-H015 INSPECTION AND ACCEPTANCE OF ENGINEERING SERVICES IN SUPPORT OF SUPPLIES (NAVSEA) (FEB 2019) Item(s) 0001-0002 - For engineering services in support of delivered supplies, authorization for services shall be made by the PCO or Contracting Officer’s Representative (COR). Inspection and acceptance shall be made by the COR or a designated representative of the Government following the receipt of the certification of performance on the delivered hardware. E-246-H016 INSPECTION AND ACCEPTANCE OF F.O.B. DESTINATION DELIVERIES (NAVSEA) (OCT 2018) Item(s) 00020001-0022 0021 - Inspection and acceptance shall be made at destination by a representative of the Government. E-246-H020 QUALITY MANAGEMENT SYSTEM REQUIREMENTS W007 NOTIFICATION OF INSPECTION OR TEST (NAVSEA) (OCT 2018) The Contractor shall provide and maintain agrees to notify the COR, in writing, when the material will be inspected and/or tested. A minimum of 30 working days is required to arrange such a quality management system that, as a minimum, adheres to visit. 0001 From date of award through 1,829 days after. 1 EACH To be determined at the requirements Task Order level To be determined at the Task Order level 0002 From date of ASQaward through 1,829 days after. 1 EACH To be determined at the Task Order level To be determined at the Task Order level 0003 Ordering Period Year 1. To be ordered from date of award through 365 days after. 7 EACH N/ANSIA N/ISO 9001:2015 “Quality Management Systems – Requirements” and supplemental requirements imposed by this contractA 0004 Ordering Period Year 1. To be ordered from date of award through 365 days after. 7 EACH N/A N/A 0005 Ordering Period Year 1. To be ordered from date of award through 365 days after. 7 EACH N/A N/A 0006 Ordering Period Year 1. To be ordered from date of award through 365 days after. 7 EACH N/A N/A 0007 Ordering Period Year 2. To be ordered from 366 days after date of award through 731 days after. 7 EACH N/A N/A 0008 Ordering Period Year 2. To be ordered from 366 days after date of award through 731 days after. 7 EACH N/A N/A 0009 Ordering Period Year 2. To be ordered from 366 days after date of award through 731 days after. 7 EACH N/A N/A 0010 Ordering Period Year 3. To be ordered from 732 days after date of award through 1,097 days after. 7 EACH N/A N/A Section F - Deliveries or Performance ORDERING PERIOD 0011 Ordering Period Year 3. To be ordered from 732 days after date of award through 1,097 days after. 7 EACH N/A N/A 0012 Ordering Period Year 3. To be ordered from 732 days after date of award through 1,097 days after. 7 EACH N/A N/A 0013 Ordering Period Year 4. To be ordered from 1,098 days after date of award through 1,463 days after. 7 EACH N/A N/A 0014 Ordering Period Year 4. To be ordered from 1,098 days after date of award through 1,463 days after. 7 EACH N/A N/A 0015 Ordering Period Year 4. To be ordered from 1,098 days after date of award through 1,463 days after. 7 EACH N/A N/A 0016 Ordering Period Year 5. To be ordered from 1,464 days after date of award through 1,829 days after. 7 EACH N/A N/A 0017 Ordering Period Year 5. To be ordered from 1,464 days after date of award through 1,829 days after. 7 EACH N/A N/A 0018 Ordering Period Year 5. To be ordered from 1,464 days after date of award through 1,829 days after. 7 EACH N/A N/A 0019 Ordering Period Year 1. To be ordered from date of award through 365 days after. 1 EACH N/A N/A 0020 Ordering Period Year 1. To be ordered from date of award through 365 days after. 1 EACH N/A N/A 0021 Ordering Period Year 1. To be ordered from date of award through 365 days after. 1 EACH N/A N/A 0022 From date of award through 1,829 days after. 1 EACH N/A N/A CLAUSES INCORPORATED BY REFERENCE 52.211-17 Delivery of Excess Quantities SEP 1989 52.242-15 Stop-Work Order AUG 1989 52.242-15 Alt I Stop-Work Order (Aug 1989) - Alternate I APR 1984 52.242-17 Government Delay Of Work APR 1984 52.247-34 F.O.B. Destination NOV 1991 52.247-48 F.O.B. Destination--Evidence Of Shipment FEB 1999 CLAUSES INCORPORATED BY FULL TEXT F-211-H021 DELIVERY OR PERFORMANCE (NAVSEA) (MAR 2019) For proposal purposes the estimated date of contract award is June 2020. The quality management system procedures, planning, and all other documentation and data that comprise the quality management system shall be made available to the Government for review. Existing quality documents that meet the requirements of this contract may continue to be used. The Government may perform any necessary inspections, verifications, and evaluations to ascertain conformance to requirements and the adequacy of the implementing procedures. The Contractor shall flow down such standards, as applicable, to lower-tier subcontractors under instances covered in FAR 52.246-11(b) or at the direction of the Contracting Officer. The Government government reserves the right to disapprove the quality management system award sooner or portions thereof when it fails to meet the contractual requirementslater if necessary. The start and end dates below will be updated accordingly upon task order award. CLAUSES INCORPORATED BY FULL TEXT E-246F-211-H022 INSPECTION AND TEST RECORDS W001 PARTIAL DELIVERIES (NAVSEA) (JAN 2019OCT 2018) Inspection and test records shall, as a minimum, indicate the nature of the observations, number of observations made, and the number and type of deficiencies found. Data included in inspection and test records shall Partial deliveries will not be complete and accurate, and shall be used for trend analysis and to assess corrective action and effectiveness. The data shall, on request, be identified and made available for on-site review by accepted without specific approval from the Contracting Officer or designated Government representativeOfficer. CLAUSES INCORPORATED BY FULL TEXT E-246F-242-W002 CERTIFICATE OF COMPLIANCE H001 CONTRACTOR NOTICE REGARDING LATE DELIVERY (NAVSEA) (OCT 2018)
(a) A certification of material shall be provided by In the Contractor, one (1) copy to accompany event the shipment (contractor anticipates or encounters difficulty in the packing list envelope) and (l) copy mailed to arrive at time of receipt of the shipment. Mark all certificates to the attention of Code 00Q.
(b) The certificate shall state compliance of material with drawing specification and contract/order requirements. The certificate shall as a minimum state the company name, contract/order number, drawing or specification number, and date. The certificate shall state, above the signature of a legally authorized representative of the company, the following: This certification concerns a matter within the jurisdiction of an agency of the United States and the making of a false, fictitious, or fraudulent certification may render the maker subject to prosecution under Title 18, United States Code, Section 1001.
(c) Failure to provide certification at the time of shipment may result in material being rejected and returned at the contractor's expense.
(d) The certificate shall read as follows: I certify that on [insert date], the [insert Contractor’s name] furnished the supplies called for by the Order/Contract No. via [Carrier] on [identify the bill of lading or shipping document] in accordance with all applicable requirements. I further certify that the supplies or services are of the quality specified and conform in all respects complying with the contract requirementsdelivery schedule or date, including specificationsthe contractor shall immediately notify, drawingsin writing, preservationthe Contracting Officer and the cognizant Contract Administration Services Office, packagingif assigned. The notice shall give the pertinent details; however, packingsuch notice shall not constitute a waiver by the Government of any contract delivery schedule, marking requirements, and physical item identification or of any rights or remedies provided by law or under this contract. CLAUSES INCORPORATED BY FULL TEXT F-246-H001 PERFORMANCE FOR ENGINEERING SERVICES IN SUPPORT OF SUPPLIES (part numberNAVSEA) (FEB 2019) Item(s) 0001 - Engineering services in support of supplies delivered under Item(s) 0003-0021 shall be performed within 12 months after unconditional acceptance of the last unit of the foregoing supply items. The Contractor shall notify the Contracting Officer in writing via the Contract Administration Office (CAO) of the actual date of unconditional acceptance of the last unit of the foregoing item(s), with a copy to the COR identified in Section G. CLAUSES INCORPORATED BY FULL TEXT F-247-H001 DELIVERY OF DATA (NAVSEA) (OCT 2018) All data to be furnished under this contract shall be delivered prepaid to the destination(s) and are in at the quantity shown time(s) specified on this document.the Contract Data Requirements List(s), DD Form 1423. Section G - Contract Administration Data CLAUSES INCORPORATED BY FULL TEXT 252.232-7006 WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (DEC 2018)
Appears in 1 contract
Sources: Contract
Part Identification. All items within the kit, set, installation hardware or material shall be suitably segregated and identified within the unit pack(s) or shipping container by part number and/or national stock number. Refer to the above cited MIL-STD for marking of assorted (related-unrelated) items. D-247-W001 PROHIBITED PACKING MATERIALS (NAVSEA) (OCT 2018) The use of asbestos, excelsior, newspaper or shredded paper (all types including waxed paper, computer paper and similar hygroscopic or non-neutral material) is prohibited. In addition, the use of yellow wrapping or packaging material is prohibited except where used for the containment of radioactive material. Loose fill polystyrene is prohibited for shipboard use. Section E - Inspection and Acceptance INSPECTION AND ACCEPTANCE TERMS Supplies/services will be inspected/accepted at: ▇▇▇▇ INSPECT AT INSPECT BY ACCEPT AT ACCEPT BY 0001 N/A N/A N/A N/A Origin Government Origin Government 0002 N/A N/A N/A N/A 0002AA Destination Origin Government Destination Government 0002AB Destination Government Destination Government 0002AC Destination Government Destination Government 0002AD Destination Government Destination Origin Government 0003 N/A N/A N/A N/A 0003AA Destination Origin Government Destination Government 0003AB Destination Government Destination Government 0003AC Destination Government Destination Government 0003AD Destination Government Destination Origin Government 0004 N/A N/A N/A N/A 0004AA Destination Origin Government Destination Government 0004AB Destination Government Destination Government 0004AC Destination Government Destination Government 0004AD Destination Government Destination Origin Government 0005 Destination Origin Government Destination Origin Government 0006 Destination Origin Government Destination Origin Government 0007 Destination Origin Government Destination Origin Government 0008 Destination Origin Government Destination Origin Government 0009 Destination Government Destination Government 0010 Destination Government Destination Government 0011 0100 Origin Government Origin Government 0200 Destination Government Destination Government 0012 0300 Destination Government Destination Government 0013 0400 Destination Government Destination Government 0014 1001 Origin Government Origin Government 1002 Origin Government Origin Government 1003 Origin Government Origin Government 1004 Origin Government Origin Government 1005 Origin Government Origin Government 1100 Origin Government Origin Government 1200 Destination Government Destination Government 0015 1300 Destination Government Destination Government 0016 2001 Origin Government Origin Government 2002 Origin Government Origin Government 2003 Origin Government Origin Government 2004 Origin Government Origin Government 2005 Origin Government Origin Government 2100 Origin Government Origin Government 2200 Destination Government Destination Government 0017 2300 Destination Government Destination Government 0018 3001 Origin Government Origin Government 3002 Origin Government Origin Government 3003 Origin Government Origin Government 3004 Origin Government Origin Government 3005 Origin Government Origin Government 3100 Origin Government Origin Government 3200 Destination Government Destination Government 0019 3300 Destination Government Destination Government 0020 4001 Origin Government Origin Government 4002 Origin Government Origin Government 4003 Origin Government Origin Government 4004 Origin Government Origin Government 4005 Origin Government Origin Government 4100 Origin Government Origin Government 4200 Destination Government Destination Government 0021 4300 Destination Government Destination Government 0022 Destination 5000 Origin Government Destination Origin Government CLAUSES INCORPORATED BY REFERENCE 52.246-2 Inspection Of Supplies--Fixed Price AUG 1996 52.246-4 Inspection Of Services--Fixed Price AUG 1996 52.246-5 Inspection Of Services Cost-Reimbursement APR 1984 52.246-15 Certificate of Conformance APR 1984 52.246-16 Responsibility For Supplies APR 1984 CLAUSES INCORPORATED BY FULL TEXT 52.246-11 HIGHER-LEVEL CONTRACT QUALITY REQUIREMENT (DEC 2014)
(a) The Contractor shall comply with the higher-level quality standard(s) listed below. Quality Management ANSI/ASQC Q9001 or ISO ASQ 9001-2015
(b) The Contractor shall include applicable requirements of the higher-level quality standard(s) listed in paragraph
(a) of this clause and the requirement to flow down such standards, as applicable, to lower-tier subcontracts, in--
(1) Any subcontract for critical and complex items (see 46.203(b) and (c)); or
(2) When the technical requirements of a subcontract require--
(i) Control of such things as design, work operations, in-process control, testing, and inspection; or
(ii) Attention to such factors as organization, planning, work instructions, documentation control, and advanced metrology. (End of clause) CLAUSES INCORPORATED BY FULL TEXT E-246-H013 H015 INSPECTION AND ACCEPTANCE OF DATA ENGINEERING SERVICES IN SUPPORT OF SUPPLIES (NAVSEA) (OCT 2018FEB 2019) Item(s) 0200, 1200, 2200, 3200 and 4200, - For engineering services in support of delivered supplies, authorization for services shall be made by the PCO or Contracting Officer’s Representative (COR). Inspection and acceptance of all data shall be as specified made by the COR or a designated representative of the Government following the receipt of the certification of performance on the attached Contract Data Requirements List(s), DD Form 1423delivered hardware. CLAUSES INCORPORATED BY FULL TEXT E-246-H016 INSPECTION AND ACCEPTANCE OF F.O.B. DESTINATION DELIVERIES (NAVSEA) (OCT 2018) Item(s) 0002-0022 0009, 0010, 0200, 0300, 0400, 1200, 1300, 2200, 2300, 3200, 3300, 4200 and 4300 - Inspection and acceptance shall be made at destination by a representative of the Government. E-246-H017 INSPECTION AND ACCEPTANCE OF F.O.B. ORIGIN DELIVERIES (NAVSEA) (OCT 2018) Item(s) 0001-0008, 0100, 1001-1005, 1100, 2001-2005, 2100, 3001-3005, 3100, 4001-4005 and 4100- Inspection and acceptance shall be made at source by a representative of the cognizant Contract Administration Office or other representative of the Government. E-246-H018 INSPECTION AND ACCEPTANCE OF PIO (NAVSEA) (OCT 2018) Item(s) 5000 - Inspection and acceptance of parts ordered hereunder shall be as established in each PIO. Unless otherwise stated in the PIO, parts shall be inspected and accepted at source by a representative of the Contract Administration Office. E-246-H020 QUALITY MANAGEMENT SYSTEM REQUIREMENTS (NAVSEA) (OCT 2018) The Contractor shall provide and maintain a quality management system that, as a minimum, adheres to the requirements of ASQ/ANSI/ISO 9001:2015 “Quality Management Systems – Requirements” and supplemental requirements imposed by this contract. The quality management system procedures, planning, and all other documentation and data that comprise the quality management system shall be made available to the Government for review. Existing quality documents that meet the requirements of this contract may continue to be used. The Government may perform any necessary inspections, verifications, and evaluations to ascertain conformance to requirements and the adequacy of the implementing procedures. The Contractor shall flow down such standards, as applicable, to lower-tier subcontractors under instances covered in FAR 52.246-11(b) or at the direction of the Contracting Officer. The Government reserves the right to disapprove the quality management system or portions thereof when it fails to meet the contractual requirements. CLAUSES INCORPORATED BY FULL TEXT E-246-H021 COST DATA FOR QUALITY MANAGEMENT SYSTEM (NAVSEA) (JAN 2019) The contractor shall maintain and use cost data as a management element of the Quality Management System. The specific cost data to be maintained and used will be determined by the contractor. The data shall, on request, be identified and made available for on-site review by the Contracting Officer or designated Government representative. E-246-H022 INSPECTION AND TEST RECORDS (NAVSEA) (JAN 2019) Inspection and test records shall, as a minimum, indicate the nature of the observations, number of observations made, and the number and type of deficiencies found. Data included in inspection and test records shall be complete and accurate, and shall be used for trend analysis and to assess corrective action and effectiveness. The data shall, on request, be identified and made available for on-site review by the Contracting Officer or designated Government representative. CLAUSES INCORPORATED BY FULL TEXT E-246-W002 CERTIFICATE OF COMPLIANCE H023 QUALITY REQUIREMENT FOR SOFTWARE DEVELOPMENT OR PRODUCTION (NAVSEA) (OCT 2018)JAN 2019) The contractor's software quality program shall be an integral part of the overall Quality Management System. Software quality program controls shall be applicable to all project software that is developed, maintained, or modified within the following categories:
(a) A certification of material shall be provided by the Contractor, one (1) copy to accompany the shipment (in the packing list envelope) and (l) copy mailed to arrive at time of receipt of the shipment. Mark all certificates to the attention of Code 00Q.All deliverable software
(b) The certificate shall state compliance All deliverable software that is included as part of material with drawing specification and contract/order requirements. The certificate shall as a minimum state the company name, contract/order number, drawing deliverable hardware or specification number, and date. The certificate shall state, above the signature of a legally authorized representative of the company, the following: This certification concerns a matter within the jurisdiction of an agency of the United States and the making of a false, fictitious, or fraudulent certification may render the maker subject to prosecution under Title 18, United States Code, Section 1001firmware.
(c) Failure to provide certification at the time Non deliverable software (commercially available or user-developed) used for development, fabrication, testing, or acceptance of shipment may result in material being rejected deliverable software or hardware (includes automated fabrication, test, and returned at the contractor's expenseinspection/acceptance equipment software and software design, test, and inspection tools).
(d) Commercially available, reusable, or Government software designated as part of a deliverable item. Section F - Deliveries or Performance CLINs 0001- 0005 (if exercised 1001-1005, 2001-2005, 3001-3005, 4001-4005) – Delivery shall be as specified in each modification. The certificate shall read as follows: I certify that on [insert date]Offeror may be required to deliver up to fifty (50) Console units per month and one hundred (100) Tactical Equivalent Consoles, the [insert Contractor’s name] furnished the supplies called for by the Order/Contract No. via [Carrier] on [identify the bill of lading or shipping document] in accordance with all applicable requirements. I further certify that the supplies or services are of the quality specified Displays and conform in all respects Peripheral Equipment units per month with the contract following delivery requirements: Console Equipment (0001-0003, including specifications1001-1003, drawings2001-2003, preservation3001-3003, packaging, packing, marking requirements, and physical item identification (part number), and are in the quantity shown on this document.4001-4003) not to exceed ten
Appears in 1 contract
Sources: Contract
Part Identification. All items within the kit, set, installation hardware or material shall be suitably segregated and identified within the unit pack(s) or shipping container by part number and/or national stock number. Refer to the above cited MIL-STD for marking of assorted (related-unrelated) items. D-247-W001 PROHIBITED PACKING MATERIALS (NAVSEA) (OCT 2018) The use of asbestos, excelsior, newspaper or shredded paper (all types including waxed paper, computer paper and similar hygroscopic or non-neutral material) is prohibited. In addition, the use of yellow wrapping or packaging material is prohibited except where used for the containment of radioactive material. Loose fill polystyrene is prohibited for shipboard use. Section E - Inspection and Acceptance INSPECTION AND ACCEPTANCE TERMS Supplies/services will be inspected/accepted at: ▇▇▇▇ INSPECT AT INSPECT BY ACCEPT AT ACCEPT BY 0001 1001 Origin Government Destination Government 2001 N/A N/A N/A N/A 0002 3001 N/A N/A N/A N/A 0002AA Destination Government Destination Government 0002AB Destination Government Destination Government 0002AC Destination Government Destination Government 0002AD Destination Government Destination Government 0003 4001 N/A N/A N/A N/A 0003AA Destination 5001 Origin Government Destination Government 0003AB Destination 5002 Origin Government Destination Government 0003AC Destination 5003 Origin Government Destination Government 0003AD Destination 5004 Origin Government Destination Government 0004 N/A N/A N/A N/A 0004AA Destination 5005 Origin Government Destination Government 0004AB Destination 5006 Origin Government Destination Government 0004AC Destination 5007 Origin Government Destination Government 0004AD Destination 5008 Origin Government Destination Government 0005 Destination 5009 Origin Government Destination Government 0006 Destination 5010 Origin Government Destination Government 0007 Destination 5011 Origin Government Destination Government 0008 Destination 5012 Origin Government Destination Government 0009 Destination 5013 Origin Government Destination Government 0010 Destination 5014 Origin Government Destination Government 0011 Destination 5015 Origin Government Destination Government 0012 Destination 5016 Origin Government Destination Government 0013 Destination 5017 Origin Government Destination Government 0014 Destination 5018 Origin Government Destination Government 0015 Destination 5019 Origin Government Destination Government 0016 Destination 5020 Origin Government Destination Government 0017 Destination 6001 Origin Government Destination Government 0018 Destination Government Destination Government 0019 Destination Government Destination Government 0020 Destination Government Destination Government 0021 Destination Government Destination Government 0022 Destination 9001 Origin Government Destination Government CLAUSES INCORPORATED BY REFERENCE 52.246-2 Inspection Of Supplies--Fixed Price AUG 1996 52.246-3 Inspection Of Supplies Cost-Reimbursement MAY 2001 52.246-4 Inspection Of Services--Fixed Price AUG 1996 52.246-5 Inspection Of Services Cost-Reimbursement APR 1984 52.246-16 Responsibility For Supplies APR 1984 CLAUSES INCORPORATED BY FULL TEXT 52.246-11 HIGHER-LEVEL CONTRACT QUALITY REQUIREMENT (DEC 2014)
(a) The Contractor shall comply with the higher-level quality standard(s) listed below. ANSI/ASQC Q9001 or ISO 9001
(b) The Contractor shall include applicable requirements of the higher-level quality standard(s) listed in paragraph
(a) of this clause and the requirement to flow down such standards, as applicable, to lower-tier subcontracts, in--
(1) Any subcontract for critical and complex items (see 46.203(b) and (c)); or
(2) When the technical requirements of a subcontract require--
(i) Control of such things as design, work operations, in-process control, testing, and inspection; or
(ii) Attention to such factors as organization, planning, work instructions, documentation control, and advanced metrology. (End of clause) CLAUSES INCORPORATED BY FULL TEXT E-246-H013 INSPECTION AND ACCEPTANCE OF DATA (NAVSEA) (OCT 2018) Inspection and acceptance of all data shall be as specified on the attached Contract Data Requirements List(s), DD Form 1423. CLAUSES INCORPORATED BY FULL TEXT E-246-H016 INSPECTION AND ACCEPTANCE OF F.O.B. DESTINATION DELIVERIES (NAVSEA) (OCT 2018) Item(s) 00021001-0022 - 6001 – Inspection shall be at source by a representative of the Government and acceptance shall be made at destination by a representative of the Government. E-246-H020 QUALITY MANAGEMENT SYSTEM REQUIREMENTS H017 INSPECTION AND ACCEPTANCE OF F.O.B. ORIGIN DELIVERIES (NAVSEA) (OCT 2018) The Contractor shall provide and maintain a quality management system that, as a minimum, adheres to the requirements of ASQ/ANSI/ISO 9001:2015 “Quality Management Systems – Requirements” and supplemental requirements imposed by this contract. The quality management system procedures, planning, and all other documentation and data that comprise the quality management system Item(s) 1001-6001 - Inspection shall be made available to the Government for review. Existing quality documents that meet the requirements of this contract may continue to be used. The Government may perform any necessary inspections, verifications, and evaluations to ascertain conformance to requirements and the adequacy at source by a representative of the implementing procedures. The Contractor shall flow down such standards, as applicable, to lower-tier subcontractors under instances covered in FAR 52.246-11(b) cognizant Contract Administration Office or at the direction other representative of the Contracting Officer. The Government reserves the right to disapprove the quality management system or portions thereof when it fails to meet the contractual requirementsGovernment. CLAUSES INCORPORATED BY FULL TEXT E-246-H022 INSPECTION AND TEST RECORDS (NAVSEA) (JAN 2019) Inspection and test records shall, as a minimum, indicate the nature of the observations, number of observations made, and the number and type of deficiencies found. Data included in inspection and test records shall be complete and accurate, and shall be used for trend analysis and to assess corrective action and effectiveness. The data shall, on request, be identified and made available for on-site review by the Contracting Officer or designated Government representative. CLAUSES INCORPORATED BY FULL TEXT E-246-W002 CERTIFICATE OF COMPLIANCE W004 PROCUREMENT QUALITY ASSURANCE INSPECTION AND ACCEPTANCE (NAVSEA) (OCT 2018)
(a) A certification Initial inspection of material the supplies to be furnished hereunder shall be provided made by the Contractorcognizant Defense Contract Management Agency at the contractor's or subcontractor's plant located at TBD. The contractor shall notify the cognizant inspector when the material is available for inspection. The place designated for such inspections shall not be changed without authorization of the Contracting Officer. Final inspection and acceptance shall be made by Naval Surface Warfare Center, one (1) copy to accompany the shipment (in the packing list envelope) and (l) copy mailed to arrive at time of Crane Division within 60 calendar days after receipt of the shipment. Mark all certificates to the attention of Code 00Q.deliverables
(b) The certificate Initial inspection shall state compliance consist of material quality assurance at point of manufacture or assembly and check/test prior to shipment. Final inspection and acceptance will be made by the Receiving Activity after installation/check out/testing of the supplies. Section F - Deliveries or Performance DELIVERY INFORMATION DELIVERY INFORMATION CLIN DELIVERY DATE QUANTITY SHIP TO ADDRESS DODAAC / CAGE 1001 POP 30-APR-2021 TO 30-APR-2026 N/A NAVAL SURFACE WARFARE CENTER CRANE DIV M/F: ▇▇▇▇▇ ▇▇▇▇▇▇▇▇▇▇ (BLDG 3330 S) BLDG 41 SE CENTRAL RECEIVING 300 HWY 361 CRANE IN 47522-5001 812-854-1567 FOB: Destination N00164 2001 N/A N/A N/A N/A 3001 N/A N/A N/A N/A 4001 N/A N/A N/A N/A 5001 12 mths. ADC NAVAL SURFACE WARFARE CENTER CRANE DIV M/F: ▇▇▇▇▇ ▇▇▇▇▇▇▇▇▇▇ (BLDG 3330 S) BLDG 41 SE CENTRAL RECEIVING ▇▇▇ ▇▇▇ ▇▇▇ ▇▇▇▇▇ ▇▇ ▇▇▇▇▇-5001 812-854-1567 FOB: Origin (after Loading) N00164 5002 12 mths. ADC (SAME AS PREVIOUS LOCATION) FOB: Origin (after Loading) N00164 5003 12 mths. ADC (SAME AS PREVIOUS LOCATION) FOB: Origin (after Loading) N00164 5004 12 mths. ADC (SAME AS PREVIOUS LOCATION) FOB: Origin (after Loading) N00164 5005 12 mths. ADC (SAME AS PREVIOUS LOCATION) FOB: Origin (after Loading) N00164 5006 12 mths. ADC (SAME AS PREVIOUS LOCATION) FOB: Origin (after Loading) N00164 5007 12 mths. ADC (SAME AS PREVIOUS LOCATION) FOB: Origin (after Loading) N00164 5008 12 mths. ADC (SAME AS PREVIOUS LOCATION) FOB: Origin (after Loading) N00164 5009 12 mths. ADC (SAME AS PREVIOUS LOCATION) FOB: Origin (after Loading) N00164 5010 12 mths. ADC (SAME AS PREVIOUS LOCATION) FOB: Origin (after Loading) N00164 5011 12 mths. ADC (SAME AS PREVIOUS LOCATION) FOB: Origin (after Loading) N00164 5012 12 mths. ADC (SAME AS PREVIOUS LOCATION) FOB: Origin (after Loading) N00164 5013 12 mths. ADC (SAME AS PREVIOUS LOCATION) FOB: Origin (after Loading) N00164 5014 12 mths. ADC (SAME AS PREVIOUS LOCATION) FOB: Origin (after Loading) N00164 5015 12 mths. ADC (SAME AS PREVIOUS LOCATION) FOB: Origin (after Loading) N00164 5016 12 mths. ADC (SAME AS PREVIOUS LOCATION) FOB: Origin (after Loading) N00164 5017 12 mths. ADC (SAME AS PREVIOUS LOCATION) FOB: Origin (after Loading) N00164 5018 12 mths. ADC (SAME AS PREVIOUS LOCATION) FOB: Origin (after Loading) N00164 5019 12 mths. ADC (SAME AS PREVIOUS LOCATION) FOB: Origin (after Loading) N00164 5020 12 mths. ADC (SAME AS PREVIOUS LOCATION) FOB: Origin (after Loading) N00164 6001 POP 30-APR-2021 TO 30-APR-2026 N/A (SAME AS PREVIOUS LOCATION) FOB: Destination N00164 9001 N/A N/A N/A N/A CLAUSES INCORPORATED BY REFERENCE 52.242-15 Stop-Work Order AUG 1989 52.242-15 Alt I Stop-Work Order (Aug 1989) - Alternate I APR 1984 52.242-17 Government Delay Of Work APR 1984 52.247-29 F.O.B. Origin FEB 2006 52.247-34 F.O.B. Destination NOV 1991 52.247-65 F.O.B. Origin, Prepaid Freight--Small Package Shipments JAN 1991 CLAUSES INCORPORATED BY FULL TEXT F-242-H001 CONTRACTOR NOTICE REGARDING LATE DELIVERY (NAVSEA) (OCT 2018) In the event the contractor anticipates or encounters difficulty in complying with drawing specification the contract delivery schedule or date, the contractor shall immediately notify, in writing, the Contracting Officer and contract/order requirementsthe cognizant Contract Administration Services Office, if assigned. The certificate notice shall as give the pertinent details; however, such notice shall not constitute a minimum state waiver by the company nameGovernment of any contract delivery schedule, or of any rights or remedies provided by law or under this contract/order number, drawing or specification number, and date. CLAUSES INCORPORATED BY FULL TEXT F-246-H001 PERFORMANCE FOR ENGINEERING SERVICES IN SUPPORT OF SUPPLIES (NAVSEA) (FEB 2019) Item(s) 4001 - Engineering services in support of supplies delivered under Item(s) 2001-3001 shall be performed within 12 months after unconditional acceptance of the last unit of the foregoing supply items. The certificate Contractor shall state, above notify the signature of a legally authorized representative Contracting Officer in writing via the Contract Administration Office (CAO) of the company, the following: This certification concerns a matter within the jurisdiction actual date of an agency unconditional acceptance of the United States last unit of the foregoing item(s), with a copy to the COR identified in Section G. F-247-H001 DELIVERY OF DATA (NAVSEA) (OCT 2018) All data to be furnished under this contract shall be delivered prepaid to the destination(s) and the making of a false, fictitious, or fraudulent certification may render the maker subject to prosecution under Title 18, United States Code, Section 1001.
(c) Failure to provide certification at the time time(s) specified on the Contract Data Requirements List(s), DD Form 1423. F-247-H003 F.O.B. ORIGIN (NAVSEA) (OCT 2018) All supplies hereunder shall be delivered free of expense to the Government in accordance with instructions specified in the clause hereof entitled "F.O.B. Origin" (FAR 52.247-29) at or near the Contractor's plant, TBD, for shipment may result at Government expense (normally on Government bill(s) of lading) in material being rejected and returned at accordance with the contractor's expense.
delivery instructions specified herein. This paragraph is required pursuant to 52.247-29 (d) The certificate a)(1). FMS item(s), if any, shall read as follows: I certify that be shipped on [insert date], the [insert Contractor’s name] furnished the supplies called for by the Order/Contract No. via [Carrier] on [identify the a separate bill of lading or shipping document] in accordance with all applicable requirementsand Interstate Commerce Act 49 U.S.C. Section 10721 and 13712 rates do not apply. I further certify that the supplies or services The following CLINs are of the quality specified and conform in all respects with the contract requirements, including specifications, drawings, preservation, packaging, packing, marking requirements, and physical item identification applicable: CLINs 5001-5020 Section G - Contract Administration Data CLAUSES INCORPORATED BY FULL TEXT 252.232-7006 WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (part numberDEC 2018), and are in the quantity shown on this document.
Appears in 1 contract
Sources: Contract
Part Identification. All items within the kit, set, installation hardware or material shall be suitably segregated and identified within the unit pack(s) or shipping container by part number and/or national stock number. Refer All reports delivered by the Contractor to the above cited MIL-STD for marking Government under this contract shall prominently show on the cover of assorted the report:
(related-unrelated1) items. D-247-W001 PROHIBITED PACKING MATERIALS name and business address of the Contractor
(NAVSEA2) contract number
(OCT 20183) The use of asbestos, excelsior, newspaper or shredded paper contract dollar amount
(all types including waxed paper, computer paper and similar hygroscopic 4) whether the contract was competitively or non-neutral materialcompetitively awarded
(5) is prohibited. In addition, the use sponsor: (Name of yellow wrapping or packaging material is prohibited except where used for the containment Individual Sponsor) (Name of radioactive material. Loose fill polystyrene is prohibited for shipboard use. Requiring Activity) (City and State) Section E - Inspection and Acceptance INSPECTION AND ACCEPTANCE TERMS Supplies/services will be inspected/accepted at: ▇▇▇▇ INSPECT AT INSPECT BY ACCEPT AT ACCEPT BY 0001 N/A N/A N/A N/A 0001AA Destination Government Destination Government 0002 N/A N/A N/A N/A 0002AA Destination Government Destination Government 0002AB Destination Government Destination Government 0002AC Destination Government Destination Government 0002AD Destination Government Destination Government 0003 N/A N/A N/A N/A 0003AA Destination Government Destination Government 0003AB Destination Government Destination Government 0003AC Destination Government Destination Government 0003AD Destination Government Destination Government 0004 N/A N/A N/A N/A 0004AA Destination Government Destination Government 0004AB Destination Government Destination Government 0004AC Destination Government Destination Government 0004AD Destination Government Destination Government 0005 N/A N/A N/A N/A 0005AA Destination Government Destination Government 0006 Destination Government Destination Government 0007 Destination Government Destination Government 0008 Destination Government Destination Government 0009 Destination Government Destination Government 0010 Destination Government Destination Government 0011 Destination Government Destination Government 0012 Destination Government Destination Government 0013 Destination Government Destination Government 0014 Destination Government Destination Government 0015 Destination Government Destination Government 0016 Destination Government Destination Government 0017 Destination Government Destination Government 0018 Destination Government Destination Government 0019 Destination Government Destination Government 0020 Destination Government Destination Government 0021 Destination Government Destination Government 0022 Destination Government Destination Government CLAUSES INCORPORATED BY REFERENCE 52.246-2 Inspection Of Supplies--Fixed Price AUG 1996 52.246-16 Responsibility For Supplies APR 1984 CLAUSES INCORPORATED BY FULL TEXT 52.246-11 HIGHER-LEVEL CONTRACT QUALITY REQUIREMENT (DEC 2014)
(a) The Contractor shall comply with the higher-level quality standard(s) listed below. ANSI/ASQC Q9001 or ISO 9001
(b) The Contractor shall include applicable requirements of the higher-level quality standard(s) listed in paragraph
(a) of this clause and the requirement to flow down such standards, as applicable, to lower-tier subcontracts, in--
(1) Any subcontract for critical and complex items (see 46.203(b) and (c)); or
(2) When the technical requirements of a subcontract require--
(i) Control of such things as design, work operations, in-process control, testing, and inspection; or
(ii) Attention to such factors as organization, planning, work instructions, documentation control, and advanced metrology. (End of clause) CLAUSES INCORPORATED BY FULL TEXT E-246-H013 INSPECTION AND ACCEPTANCE OF DATA (NAVSEA) (OCT 2018) Inspection and acceptance of all data shall be as specified on the attached Contract Data Requirements List(s), DD Form 1423. CLAUSES INCORPORATED BY FULL TEXT E-246-H016 INSPECTION AND ACCEPTANCE OF F.O.B. DESTINATION DELIVERIES (NAVSEA) (OCT 2018) Item(s) 0002-0022 - Inspection and acceptance shall be made at destination by a representative of the 0023 Destination Government Destination Government 0024 Destination Government Destination Government 0025 Destination Government Destination Government 0026 Destination Government Destination Government 0027 Destination Government Destination Government 0028 Destination Government Destination Government 0029 Destination Government Destination Government 0030 Destination Government Destination Government 0031 Destination Government Destination Government 0032 Destination Government Destination Government 0033 Destination Government Destination Government 0034 Destination Government Destination Government. E-246-H020 QUALITY MANAGEMENT SYSTEM REQUIREMENTS (NAVSEA) (OCT 2018) The Contractor shall provide and maintain a quality management system that, as a minimum, adheres to the requirements of ASQ/ANSI/ISO 9001:2015 “Quality Management Systems – Requirements” and supplemental requirements imposed by this contract. The quality management system procedures, planning, and all other documentation and data that comprise the quality management system shall be made available to the Government for review. Existing quality documents that meet the requirements of this contract may continue to be used. The Government may perform any necessary inspections, verifications, and evaluations to ascertain conformance to requirements and the adequacy of the implementing procedures. The Contractor shall flow down such standards, as applicable, to lower-tier subcontractors under instances covered in FAR 52.246-11(b) or at the direction of the Contracting Officer. The Government reserves the right to disapprove the quality management system or portions thereof when it fails to meet the contractual requirements. CLAUSES INCORPORATED BY FULL TEXT E-246-H022 INSPECTION AND TEST RECORDS (NAVSEA) (JAN 2019) Inspection and test records shall, as a minimum, indicate the nature of the observations, number of observations made, and the number and type of deficiencies found. Data included in inspection and test records shall be complete and accurate, and shall be used for trend analysis and to assess corrective action and effectiveness. The data shall, on request, be identified and made available for on-site review by the Contracting Officer or designated Government representative. CLAUSES INCORPORATED BY FULL TEXT E-246-W002 CERTIFICATE OF COMPLIANCE (NAVSEA) (OCT 2018)
(a) A certification of material shall be provided by the Contractor, one (1) copy to accompany the shipment (in the packing list envelope) and (l) copy mailed to arrive at time of receipt of the shipment. Mark all certificates to the attention of Code 00Q.
(b) The certificate shall state compliance of material with drawing specification and contract/order requirements. The certificate shall as a minimum state the company name, contract/order number, drawing or specification number, and date. The certificate shall state, above the signature of a legally authorized representative of the company, the following: This certification concerns a matter within the jurisdiction of an agency of the United States and the making of a false, fictitious, or fraudulent certification may render the maker subject to prosecution under Title 18, United States Code, Section 1001.
(c) Failure to provide certification at the time of shipment may result in material being rejected and returned at the contractor's expense.
(d) The certificate shall read as follows: I certify that on [insert date], the [insert Contractor’s name] furnished the supplies called for by the Order/Contract No. via [Carrier] on [identify the bill of lading or shipping document] in accordance with all applicable requirements. I further certify that the supplies or services are of the quality specified and conform in all respects with the contract requirements, including specifications, drawings, preservation, packaging, packing, marking requirements, and physical item identification (part number), and are in the quantity shown on this document.
Appears in 1 contract
Sources: Contract
Part Identification. All items within the kit, set, installation hardware or material shall be suitably segregated and identified within the unit pack(s) or shipping container by part number and/or national stock number. Refer to the above cited MIL-STD for marking of assorted (related-unrelated) items. D-247-W001 PROHIBITED PACKING MATERIALS (NAVSEA) (OCT 2018) The use of asbestos, excelsior, newspaper or shredded paper (all types including waxed paper, computer paper and similar hygroscopic or non-neutral material) is prohibited. In addition, the use of yellow wrapping or packaging material is prohibited except where used for the containment of radioactive material. Loose fill polystyrene is prohibited for shipboard use. Section E - Inspection and Acceptance INSPECTION AND ACCEPTANCE TERMS Supplies/services will be inspected/accepted at: ▇▇▇▇ INSPECT AT INSPECT BY ACCEPT AT ACCEPT BY 0001 N/A N/A N/A N/A Origin Government Origin Government 0002 N/A N/A N/A N/A 0002AA Destination Government Destination Government 0002AB Destination Government Destination Government 0002AC Destination Government Destination Government 0002AD Destination Government Destination Government 0003 N/A N/A N/A N/A 0003AA Destination Origin Government Destination Origin Government 0003AB Destination Origin Government Destination Origin Government 0003AC Destination Origin Government Destination Origin Government 0003AD Destination Origin Government Destination Origin Government 0003AE Origin Government Origin Government 0003AF Origin Government Origin Government 0004 N/A N/A N/A N/A 0004AA Destination Origin Government Destination Origin Government 0004AB Destination Origin Government Destination Origin Government 0004AC Destination Origin Government Destination Government 0004AD Destination Government Destination Origin Government 0005 Destination N/A N/A N/A N/A 0005AA Origin Government Destination Origin Government 0005AB Origin Government Origin Government 0005AC Origin Government Origin Government 0005AD Origin Government Origin Government 0005AE Origin Government Origin Government 0005AF Origin Government Origin Government 0006 Destination N/A N/A N/A N/A 0006AA Origin Government Destination Origin Government 0006AB Origin Government Origin Government 0006AC Origin Government Origin Government 0007 Destination N/A N/A N/A N/A 0007AA Origin Government Destination Origin Government 0007AB Origin Government Origin Government 0007AC Origin Government Origin Government 0008 Destination N/A N/A N/A N/A 0008AA Origin Government Destination Origin Government 0008AB Origin Government Origin Government 0008AC Origin Government Origin Government 0009 Destination N/A N/A N/A N/A 0009AA Origin Government Destination Origin Government 0009AB Origin Government Origin Government 0009AC Origin Government Origin Government 0010 Destination Origin Government Destination Origin Government 0011 Destination Origin Government Destination Origin Government 0012 Destination Origin Government Destination Origin Government 0013 Destination Origin Government Destination Origin Government 0014 Destination Origin Government Destination Origin Government 0015 Destination Origin Government Destination Origin Government 0016 Destination Origin Government Destination Origin Government 0017 Destination Origin Government Destination Origin Government 0018 Destination Origin Government Destination Origin Government 0019 Destination Origin Government Destination Origin Government 0020 Destination Origin Government Destination Origin Government 0021 Destination Origin Government Destination Government 0022 Destination Government Destination Origin Government CLAUSES INCORPORATED BY REFERENCE 52.246-2 Inspection Of Supplies--Fixed Price AUG 1996 52.246-16 Responsibility For Supplies APR 1984 CLAUSES INCORPORATED BY FULL TEXT 52.246-11 HIGHER-LEVEL CONTRACT QUALITY REQUIREMENT (DEC 2014)
(a) The Contractor shall comply with the higher-level quality standard(s) listed below. ANSI/ASQC Q9001 or [ISO 90019001:2015.]
(b) The Contractor shall include applicable requirements of the higher-level quality standard(s) listed in paragraph
(a) of this clause and the requirement to flow down such standards, as applicable, to lower-tier subcontracts, in--
(1) Any subcontract for critical and complex items (see 46.203(b) and (c)); or
(2) When the technical requirements of a subcontract require--
(i) Control of such things as design, work operations, in-process control, testing, and inspection; or
(ii) Attention to such factors as organization, planning, work instructions, documentation control, and advanced metrology. (End of clause) CLAUSES INCORPORATED BY FULL TEXT E-246-H013 INSPECTION AND ACCEPTANCE OF DATA (NAVSEA) (OCT 2018) Inspection and acceptance of all data shall be as specified on the attached Contract Data Requirements List(s), DD Form 1423. CLAUSES INCORPORATED BY FULL TEXT E-246-H016 INSPECTION AND ACCEPTANCE OF F.O.B. DESTINATION DELIVERIES (NAVSEA) (OCT 2018) Item(s) 0002-0022 - Inspection and acceptance shall be made at destination by a representative of the Government. E-246-H020 QUALITY MANAGEMENT SYSTEM REQUIREMENTS (NAVSEA) (OCT 2018) The Contractor shall provide and maintain a quality management system that, as a minimum, adheres to the requirements of ASQ/ANSI/ISO 9001:2015 “Quality Management Systems – Requirements” and supplemental requirements imposed by this contract. The quality management system procedures, planning, and all other documentation and data that comprise the quality management system shall be made available to the Government for review. Existing quality documents that meet the requirements of this contract may continue to be used. The Government may perform any necessary inspections, verifications, and evaluations to ascertain conformance to requirements and the adequacy of the implementing procedures. The Contractor shall flow down such standards, as applicable, to lower-tier subcontractors under instances covered in FAR 52.246-11(b) or at the direction of the Contracting Officer. The Government reserves the right to disapprove the quality management system or portions thereof when it fails to meet the contractual requirements. CLAUSES INCORPORATED BY FULL TEXT E-246-H022 INSPECTION AND TEST RECORDS (NAVSEA) (JAN 2019) Inspection and test records shall, as a minimum, indicate the nature of the observations, number of observations made, and the number and type of deficiencies found. Data included in inspection and test records shall be complete and accurate, and shall be used for trend analysis and to assess corrective action and effectiveness. The data shall, on request, be identified and made available for on-site review by the Contracting Officer or designated Government representative. CLAUSES INCORPORATED BY FULL TEXT E-246-W002 CERTIFICATE OF COMPLIANCE (NAVSEA) (OCT 2018)
(a) A certification of material shall be provided by the Contractor, one (1) copy to accompany the shipment (in the packing list envelope) and (l) copy mailed to arrive at time of receipt of the shipment. Mark all certificates to the attention of Code 00Q.
(b) The certificate shall state compliance of material with drawing specification and contract/order requirements. The certificate shall as a minimum state the company name, contract/order number, drawing or specification number, and date. The certificate shall state, above the signature of a legally authorized representative of the company, the following: This certification concerns a matter within the jurisdiction of an agency of the United States and the making of a false, fictitious, or fraudulent certification may render the maker subject to prosecution under Title 18, United States Code, Section 1001.
(c) Failure to provide certification at the time of shipment may result in material being rejected and returned at the contractor's expense.
(d) The certificate shall read as follows: I certify that on [insert date], the [insert Contractor’s name] furnished the supplies called for by the Order/Contract No. via [Carrier] on [identify the bill of lading or shipping document] in accordance with all applicable requirements. I further certify that the supplies or services are of the quality specified and conform in all respects with the contract requirements, including specifications, drawings, preservation, packaging, packing, marking requirements, and physical item identification (part number), and are in the quantity shown on this document.
Appears in 1 contract
Sources: Contract
Part Identification. All items within the kit, set, installation hardware or material shall be suitably segregated and identified within the unit pack(s) or shipping container by part number and/or national stock number. Refer to the above cited MIL-STD for marking of assorted (related-unrelated) items. D-247-W001 PROHIBITED PACKING MATERIALS (NAVSEA) (OCT 2018) The use of asbestos, excelsior, newspaper or shredded paper (all types including waxed paper, computer paper and similar hygroscopic or non-neutral material) is prohibited. In addition, the use of yellow wrapping or packaging material is prohibited except where used for the containment of radioactive material. Loose fill polystyrene is prohibited for shipboard use. Section E - Inspection and Acceptance INSPECTION AND ACCEPTANCE TERMS Supplies/services will be inspected/accepted at: ▇▇▇▇ INSPECT AT INSPECT BY ACCEPT AT ACCEPT BY 0001 Destination Government Destination Government 0002 Destination Government Destination Government 0003 Destination Government Destination Government 0004 Destination Government Destination Government 000401 N/A N/A N/A N/A 0002 000402 N/A N/A N/A N/A 0002AA Destination Government Destination Government 0002AB Destination Government Destination Government 0002AC Destination Government Destination Government 0002AD Destination Government Destination Government 0003 0005 N/A N/A N/A N/A 0003AA Destination Government Destination Government 0003AB Destination Government Destination Government 0003AC Destination Government Destination Government 0003AD Destination Government Destination Government 0004 N/A N/A N/A N/A 0004AA Destination Government Destination Government 0004AB Destination Government Destination Government 0004AC Destination Government Destination Government 0004AD Destination Government Destination Government 0005 Destination Government Destination Government 0006 Destination Government Destination Government 0007 Destination Government Destination Government 0008 Destination Government Destination Government 0009 Destination Government Destination Government 0010 Destination Government Destination Government 0011 Destination Government Destination Government 0012 Destination Government Destination Government 0013 Destination Government Destination Government 0014 Destination Government Destination Government 0015 Destination Government Destination Government 0016 Destination Government Destination Government 0017 Destination Government Destination Government 0018 Destination Government Destination Government 0019 Destination Government Destination Government 0020 Destination Government Destination Government 0021 Destination Government Destination Government 0022 Destination Government Destination Government 0023 Destination Government Destination Government 002301 N/A N/A N/A N/A 002302 N/A N/A N/A N/A 0024 Destination Government Destination Government 0025 Destination Government Destination Government 0026 Destination Government Destination Government 0027 Destination Government Destination Government 0028 Destination Government Destination Government 0029 Destination Government Destination Government 0030 Destination Government Destination Government 0031 Destination Government Destination Government 0032 Destination Government Destination Government 0033 Destination Government Destination Government CLAUSES INCORPORATED BY REFERENCE 52.246-2 Inspection Of Supplies--Fixed Price AUG 1996 52.246-16 Responsibility For Supplies APR 1984 252.217-7005 Inspection and ▇▇▇▇▇▇ of Doing Work JUL 2009 252.217-7013 Guarantees DEC 1991 CLAUSES INCORPORATED BY FULL TEXT 52.246E-246-11 HIGHER-LEVEL CONTRACT QUALITY REQUIREMENT H010 TESTS AND TRIALS--BASIC (DEC 2014)
NAVSEA) (aOCT 2018) During the conduct of required tests and trials, the vessel shall be under the control of the vessel's Commander and crew with representatives of the Contractor and the Government on board to determine whether or not the work done by the Contractor has been satisfactorily performed. The Contractor shall comply with provide and install all fittings and appliances which may be necessary for dock and sea trials to enable the higher-level quality standard(s) listed below. ANSI/ASQC Q9001 or ISO 9001
(b) The Contractor shall include applicable representatives of the Government to determine whether the requirements of the higher-level quality standard(s) listed in paragraph
(a) of this clause contract have been met, and the requirement to flow down Contractor shall install and remove instruments and apparatus furnished by the Government for such standardstrials, as applicable, to lower-tier subcontracts, in--
(1) Any subcontract for critical and complex items (see 46.203(b) and (c)); or
(2) When required by the technical requirements of a subcontract require--
(i) Control of such things as design, work operations, in-process control, testing, and inspection; or
(ii) Attention to such factors as organization, planning, work instructions, documentation control, and advanced metrologyspecifications. (End of clause) CLAUSES INCORPORATED BY FULL TEXT E-246-H013 INSPECTION AND ACCEPTANCE OF DATA (NAVSEA) (OCT 2018) Inspection and acceptance of all data shall be as specified on the attached Contract Data Requirements List(s), DD Form 1423. CLAUSES INCORPORATED BY FULL TEXT E-246-H016 INSPECTION AND ACCEPTANCE OF F.O.B. DESTINATION DELIVERIES (NAVSEA) (OCT 2018) Item(s) 0002-0022 CLINs 0001 - 0033 - Inspection and acceptance shall be made at destination by a representative of the Government. E-246-H020 QUALITY MANAGEMENT SYSTEM REQUIREMENTS (NAVSEA) (OCT 2018) The Contractor shall provide and maintain a quality management system that, as a minimum, adheres to the requirements of ASQ/ANSI/ISO 9001:2015 “Quality Management Systems – Requirements” and supplemental requirements imposed by this contract. The quality management system procedures, planning, and all other documentation and data that comprise the quality management system shall be made available to the Government for review. Existing quality documents that meet the requirements of this contract may continue to be used. The Government may perform any necessary inspections, verifications, and evaluations to ascertain conformance to requirements and the adequacy of the implementing procedures. The Contractor shall flow down such standards, as applicable, to lower-tier subcontractors under instances covered in FAR 52.246-11(b) or at the direction of the Contracting Officer. The Government reserves the right to disapprove the quality management system or portions thereof when it fails to meet the contractual requirements. CLAUSES INCORPORATED BY FULL TEXT E-246Section F - Deliveries or Performance DELIVERY INFORMATION CLIN DELIVERY DATE QUANTITY SHIP TO ADDRESS DODAAC / CAGE 0001 14-H022 INSPECTION AND TEST RECORDS JAN-2022 1 SWRMC CODE 300 ▇▇▇▇▇ ▇▇▇▇ ▇▇▇▇ ▇▇▇▇▇▇▇ ▇▇▇▇▇▇ SUITE 1 BUILDING 94 FLOOR 1 N55236 SAN DIEGO CA 92136-5205 619-556-6807 FOB: Destination 0002 14-JAN-2022 1 (NAVSEASAME AS PREVIOUS LOCATION) FOB: Destination N55236 0003 14-JAN-2022 1 (JAN 2019SAME AS PREVIOUS LOCATION) Inspection and test records shall, as a minimum, indicate the nature of the observations, number of observations made, and the number and type of deficiencies found. Data included in inspection and test records shall be complete and accurate, and shall be used for trend analysis and to assess corrective action and effectiveness. The data shall, on request, be identified and made available for onFOB: Destination N55236 0004 14-site review by the Contracting Officer or designated Government representative. CLAUSES INCORPORATED BY FULL TEXT E-246JAN-2022 1 (SAME AS PREVIOUS LOCATION) FOB: Destination N55236 000401 N/A N/A N/A N/A 000402 N/A N/A N/A N/A 0005 N/A N/A N/A N/A 0006 14-W002 CERTIFICATE OF COMPLIANCE (NAVSEA) (OCT 2018)
(a) A certification of material shall be provided by the Contractor, one (1) copy to accompany the shipment (in the packing list envelope) and (l) copy mailed to arrive at time of receipt of the shipment. Mark all certificates to the attention of Code 00Q.
(b) The certificate shall state compliance of material with drawing specification and contract/order requirements. The certificate shall as a minimum state the company name, contract/order number, drawing or specification number, and date. The certificate shall state, above the signature of a legally authorized representative of the company, the followingJAN-2022 1 SWRMC CODE 300 ▇▇▇▇▇ ▇▇▇▇ ▇▇▇▇ ▇▇▇▇▇▇▇ ▇▇▇▇▇▇ SUITE 1 N55236 BUILDING 94 FLOOR 1 SAN DIEGO CA 92136-5205 619-556-6807 FOB: This certification concerns a matter within the jurisdiction of an agency of the United States and the making of a false, fictitious, or fraudulent certification may render the maker subject to prosecution under Title 18, United States Code, Section 1001.
(c) Failure to provide certification at the time of shipment may result in material being rejected and returned at the contractor's expense.
(d) The certificate shall read as follows: I certify that on [insert date], the [insert Contractor’s name] furnished the supplies called for by the Order/Contract No. via [Carrier] on [identify the bill of lading or shipping document] in accordance with all applicable requirements. I further certify that the supplies or services are of the quality specified and conform in all respects with the contract requirements, including specifications, drawings, preservation, packaging, packing, marking requirements, and physical item identification (part number), and are in the quantity shown on this document.Destination
Appears in 1 contract
Sources: Contract
Part Identification. All items within the kit, set, installation hardware or material shall be suitably segregated and identified within the unit pack(s) or shipping container by part number and/or national stock number. Refer to the above cited MIL-STD for marking of assorted (related-unrelated) items. D-247HQ D-2-W001 PROHIBITED PACKING MATERIALS 0008 MARKING OF REPORTS (NAVSEA) (OCT 2018SEP 1990) The use All reports delivered by the Contractor to the Government under this contract shall prominently show on the cover of asbestos, excelsior, newspaper or shredded paper the report:
(all types including waxed paper, computer paper 1) name and similar hygroscopic business address of the Contractor
(2) contract number
(3) contract dollar amount
(4) whether the contract was competitively or non-neutral materialcompetitively awarded
(5) is prohibited. In addition, the use sponsor: (Name of yellow wrapping or packaging material is prohibited except where used for the containment of radioactive material. Loose fill polystyrene is prohibited for shipboard use. Requiring Activity) (City and State) Section E - Inspection and Acceptance INSPECTION AND ACCEPTANCE TERMS Supplies/services will be inspected/accepted at: ▇▇▇▇ INSPECT AT INSPECT BY ACCEPT AT ACCEPT BY 0001 1000 Destination Government Destination Government 1001 Destination Government Destination Government 1002 N/A N/A N/A N/A 0002 Government 1100 Destination Government Destination Government 1101 Destination Government Destination Government 1102 N/A N/A N/A N/A 0002AA Government 1200 Destination Government Destination Government 0002AB 1201 Destination Government Destination Government 0002AC Destination Government Destination Government 0002AD Destination Government Destination Government 0003 1202 N/A N/A N/A N/A 0003AA Government 1300 Destination Government Destination Government 0003AB 1301 Destination Government Destination Government 0003AC Destination Government Destination Government 0003AD Destination Government Destination Government 0004 1302 N/A N/A N/A N/A 0004AA Government 1400 Destination Government Destination Government 0004AB 1401 Destination Government Destination Government 0004AC 1402 N/A N/A N/A Government 2000 Destination Government Destination Government 0004AD 2001 Destination Government Destination Government 0005 2002 N/A N/A N/A Government 2100 Destination Government Destination Government 0006 2101 Destination Government Destination Government 0007 2102 N/A N/A N/A Government 2200 Destination Government Destination Government 0008 2201 Destination Government Destination Government 0009 2202 N/A N/A N/A Government 2300 Destination Government Destination Government 0010 2301 Destination Government Destination Government 0011 2302 N/A N/A N/A Government 2400 Destination Government Destination Government 0012 2401 Destination Government Destination Government 0013 Destination Government Destination Government 0014 Destination Government Destination Government 0015 Destination Government Destination Government 0016 Destination Government Destination Government 0017 Destination Government Destination Government 0018 Destination Government Destination Government 0019 Destination Government Destination Government 0020 Destination Government Destination Government 0021 Destination Government Destination Government 0022 Destination Government Destination 2402 N/A N/A N/A Government CLAUSES INCORPORATED BY REFERENCE 52.246-2 Inspection Of Supplies--Fixed Price AUG 1996 52.246-16 Responsibility For Supplies APR 1984 252.217-7005 Inspection and ▇▇▇▇▇▇ of Doing Work JUL 2009 252.217-7013 Guarantees DEC 1991 CLAUSES INCORPORATED BY FULL TEXT 52.246HQ E-1-11 HIGHER-LEVEL CONTRACT QUALITY REQUIREMENT (DEC 2014)
(a) The Contractor shall comply with the higher-level quality standard(s) listed below. ANSI/ASQC Q9001 or ISO 9001
(b) The Contractor shall include applicable requirements of the higher-level quality standard(s) listed in paragraph
(a) of this clause and the requirement to flow down such standards, as applicable, to lower-tier subcontracts, in--
(1) Any subcontract for critical and complex items (see 46.203(b) and (c)); or
(2) When the technical requirements of a subcontract require--
(i) Control of such things as design, work operations, in-process control, testing, and inspection; or
(ii) Attention to such factors as organization, planning, work instructions, documentation control, and advanced metrology. (End of clause) CLAUSES INCORPORATED BY FULL TEXT E-246-H013 0001 INSPECTION AND ACCEPTANCE OF DATA (NAVSEA) (OCT 2018SEP 1990) Inspection and acceptance of all data shall be as specified on the attached Contract Data Requirements List(s), DD Form 1423. CLAUSES INCORPORATED BY FULL TEXT E-246HQ E-2-H016 INSPECTION AND ACCEPTANCE OF F.O.B. DESTINATION DELIVERIES (NAVSEA) (OCT 2018) Item(s) 0002-0022 - Inspection and acceptance shall be made at destination by a representative of the Government. E-246-H020 0015 QUALITY MANAGEMENT SYSTEM REQUIREMENTS (NAVSEA) (OCT 2018) The Contractor shall provide and maintain a quality management system that, as a minimum, adheres to the requirements of ASQ/ANSI/ISO 9001:2015 “Quality Management Systems – Requirements” and supplemental requirements imposed by this contract. The quality management system procedures, planning, and all other documentation and data that comprise the quality management system shall be made available to the Government for review. Existing quality documents that meet the requirements of this contract may continue to be used. The Government may perform any necessary inspections, verifications, and evaluations to ascertain conformance to requirements and the adequacy of the implementing procedures. The Contractor shall flow down such standards, as applicable, to lower-tier subcontractors under instances covered in FAR 52.246-11(b) or at the direction of the Contracting Officer. The Government reserves the right to disapprove the quality management system or portions thereof when it fails to meet the contractual requirements. CLAUSES INCORPORATED BY FULL TEXT E-246-H022 INSPECTION AND TEST RECORDS (NAVSEA) (JAN 2019) Inspection and test records shall, as a minimum, indicate the nature of the observations, number of observations made, and the number and type of deficiencies found. Data included in inspection and test records shall be complete and accurate, and shall be used for trend analysis and to assess corrective action and effectiveness. The data shall, on request, be identified and made available for on-site review by the Contracting Officer or designated Government representative. CLAUSES INCORPORATED BY FULL TEXT E-246-W002 CERTIFICATE OF COMPLIANCE (NAVSEA) (OCT 2018APR 2017)
(a) A certification of material shall be provided by the Contractor, one (1) copy to accompany the shipment (in the packing list envelope) and (l) copy mailed to arrive at time of receipt of the shipment. Mark all certificates to the attention of Code 00Q.
(b) The certificate shall state compliance of material with drawing specification and contract/order requirements. The certificate shall as a minimum state the company name, contract/order number, drawing or specification number, and date. The certificate shall state, above the signature of a legally authorized representative of the company, the following: This certification concerns a matter within the jurisdiction of an agency of the United States and the making of a false, fictitious, or fraudulent certification may render the maker subject to prosecution under Title 18, United States Code, Section 1001.
(c) Failure to provide certification at the time of shipment may result in material being rejected and returned at the contractor's expense.
(d) The certificate shall read as follows: I certify that on [insert date], the [insert Contractor’s name] furnished the supplies called for by the Order/Contract No. via [Carrier] on [identify the bill of lading or shipping document] in accordance with all applicable requirements. I further certify that the supplies or services are of the quality specified and conform in all respects with the contract requirements, including specifications, drawings, preservation, packaging, packing, marking requirements, and physical item identification (part number), and are in the quantity shown on this document.
Appears in 1 contract
Sources: Contract
Part Identification. All items within the kit, set, installation hardware or material shall be suitably segregated and identified within the unit pack(s) or shipping container by part number and/or national stock number. Refer to the above cited MIL-STD for marking of assorted (related-unrelated) items. D-247-W001 PROHIBITED PACKING MATERIALS (NAVSEA) (OCT 2018) The use of asbestos, excelsior, newspaper or shredded paper (all types including waxed paper, computer paper and similar hygroscopic or non-neutral material) is prohibited. In addition, the use of yellow wrapping or packaging material is prohibited except where used for the containment of radioactive material. Loose fill polystyrene is prohibited for shipboard use. Section E - Inspection and Acceptance INSPECTION AND ACCEPTANCE TERMS Supplies/services will be inspected/accepted at: ▇▇▇▇ INSPECT AT INSPECT BY ACCEPT AT ACCEPT BY 0001 Origin Government Origin Government 0002 Origin Government Origin Government 0003 Origin Government Origin Government 0004 Origin Government Origin Government 0005 Origin Government Origin Government 0006 Origin Government Origin Government 0007 Origin Government Origin Government 0008 Origin Government Origin Government 0009 Origin Government Origin Government 0010 N/A Government N/A Government 0011 N/A Government N/A 0002 Government 0012 N/A Government N/A N/A N/A 0002AA Destination Government Destination Government 0002AB Destination Government Destination Government 0002AC Destination Government Destination Government 0002AD Destination Government Destination Government 0003 N/A N/A N/A N/A 0003AA Destination Government Destination Government 0003AB Destination Government Destination Government 0003AC Destination Government Destination Government 0003AD Destination Government Destination Government 0004 N/A N/A N/A N/A 0004AA Destination Government Destination Government 0004AB Destination Government Destination Government 0004AC Destination Government Destination Government 0004AD Destination Government Destination Government 0005 Destination Government Destination Government 0006 Destination Government Destination Government 0007 Destination Government Destination Government 0008 Destination Government Destination Government 0009 Destination Government Destination Government 0010 Destination Government Destination Government 0011 Destination Government Destination Government 0012 Destination Government Destination Government 0013 Destination Government Destination Government 0014 Destination Origin Government Destination Origin Government 0015 Destination Origin Government Destination Origin Government 0016 Destination Origin Government Destination Origin Government 0017 Destination Origin Government Destination Origin Government 0018 Destination Origin Government Destination Origin Government 0019 Destination Origin Government Destination Origin Government 0020 Destination Government Destination Government 0021 0100 Destination Government Destination Government 0022 0101 Destination Government Destination Government 0102 Origin Government Origin Government 0103 Origin Government Origin Government 0104 Destination Government Destination Government 0200 Destination Government Destination Government 0201 Destination Government Destination Government 0202 Origin Government Origin Government 0203 Origin Government Origin Government 0204 Destination Government Destination Government CLAUSES INCORPORATED BY REFERENCE 52.246-2 Inspection Of Supplies--Fixed Price AUG 1996 52.246-2 Alt I Inspection Of Supplies Fixed Price (Aug 1996) - Alternate I JUL 1985 52.246-3 Inspection Of Supplies Cost-Reimbursement MAY 2001 52.246-5 Inspection Of Services Cost-Reimbursement APR 1984 52.246-15 Certificate of Conformance APR 1984 52.246-16 Responsibility For Supplies APR 1984 CLAUSES INCORPORATED BY FULL TEXT 52.246-11 HIGHER-LEVEL CONTRACT QUALITY REQUIREMENT (DEC 2014)
(a) The Contractor shall comply with the higher-level quality standard(s) listed below. [ASQ/ANSI/ASQC Q9001 or ISO 90019001:2015]
(b) The Contractor shall include applicable requirements of the higher-level quality standard(s) listed in paragraph
(a) of this clause and the requirement to flow down such standards, as applicable, to lower-tier subcontracts, in--
(1) Any subcontract for critical and complex items (see 46.203(b) and (c)); or
(2) When the technical requirements of a subcontract require--
(i) Control of such things as design, work operations, in-process control, testing, and inspection; or
(ii) Attention to such factors as organization, planning, work instructions, documentation control, and advanced metrology. (End of clause) CLAUSES INCORPORATED BY FULL TEXT E-246-H013 INSPECTION AND ACCEPTANCE OF DATA (NAVSEA) (OCT 2018) Inspection and acceptance of all data shall be as specified on the attached Contract Data Requirements List(s), DD Form 1423. CLAUSES INCORPORATED BY FULL TEXT E-246-H016 INSPECTION AND ACCEPTANCE OF F.O.B. DESTINATION DELIVERIES (NAVSEA) (OCT 2018) Item(s) 0002-0022 - Inspection and acceptance shall be made at destination by a representative of the Government. E-246-H020 QUALITY MANAGEMENT SYSTEM REQUIREMENTS (NAVSEA) (OCT 2018) The Contractor shall provide and maintain a quality management system that, as a minimum, adheres to the requirements of ASQ/ANSI/ISO 9001:2015 “Quality Management Systems – Requirements” and supplemental requirements imposed by this contract. The quality management system procedures, planning, and all other documentation and data that comprise the quality management system shall be made available to the Government for review. Existing quality documents that meet the requirements of this contract may continue to be used. The Government may perform any necessary inspections, verifications, and evaluations to ascertain conformance to requirements and the adequacy of the implementing procedures. The Contractor shall flow down such standards, as applicable, to lower-tier subcontractors under instances covered in FAR 52.246-11(b) or at the direction of the Contracting Officer. The Government reserves the right to disapprove the quality management system or portions thereof when it fails to meet the contractual requirements. CLAUSES INCORPORATED BY FULL TEXT E-246-H022 INSPECTION AND TEST RECORDS (NAVSEA) (JAN 2019) Inspection and test records shall, as a minimum, indicate the nature of the observations, number of observations made, and the number and type of deficiencies found. Data included in inspection and test records shall be complete and accurate, and shall be used for trend analysis and to assess corrective action and effectiveness. The data shall, on request, be identified and made available for on-site review by the Contracting Officer or designated Government representative. CLAUSES INCORPORATED BY FULL TEXT E-246-W002 CERTIFICATE OF COMPLIANCE (NAVSEA) (OCT 2018)
(a) A certification of material shall be provided by the Contractor, one (1) copy to accompany the shipment (in the packing list envelope) and (l) copy mailed to arrive at time of receipt of the shipment. Mark all certificates to the attention of Code 00Q.
(b) The certificate shall state compliance of material with drawing specification and contract/order requirements. The certificate shall as a minimum state the company name, contract/order number, drawing or specification number, and date. The certificate shall state, above the signature of a legally authorized representative of the company, the following: This certification concerns a matter within the jurisdiction of an agency of the United States and the making of a false, fictitious, or fraudulent certification may render the maker subject to prosecution under Title 18, United States Code, Section 1001.
(c) Failure to provide certification at the time of shipment may result in material being rejected and returned at the contractor's expense.
(d) The certificate shall read as follows: I certify that on [insert date], the [insert Contractor’s name] furnished the supplies called for by the Order/Contract No. via [Carrier] on [identify the bill of lading or shipping document] in accordance with all applicable requirements. I further certify that the supplies or services are of the quality specified and conform in all respects with the contract requirements, including specifications, drawings, preservation, packaging, packing, marking requirements, and physical item identification (part number), and are in the quantity shown on this document.
Appears in 1 contract
Sources: Contract
Part Identification. All items within the kit, set, installation hardware or material shall be suitably segregated and identified within the unit pack(s) or shipping container by part number and/or national stock number. Refer to the above cited MIL-STD for marking of assorted (related-unrelated) items. D-247HQ D-2-W001 PROHIBITED PACKING MATERIALS 0008 MARKING OF REPORTS (NAVSEA) (OCT 2018SEP 1990) The use All reports delivered by the Contractor to the Government under this contract shall prominently show on the cover of asbestos, excelsior, newspaper or shredded paper the report:
(all types including waxed paper, computer paper 1) name and similar hygroscopic business address of the Contractor
(2) contract number
(3) contract dollar amount
(4) whether the contract was competitively or non-neutral materialcompetitively awarded
(5) is prohibitedsponsor: CAPT ▇▇▇▇▇ ▇. In addition▇▇▇▇▇ (Name of Individual Sponsor) Surface Ship Modernization Program, the use PMS 407 (Name of yellow wrapping or packaging material is prohibited except where used for the containment of radioactive material. Loose fill polystyrene is prohibited for shipboard use. Requiring Activity) Washington Navy Yard, DC (City and State) Section E - Inspection and Acceptance INSPECTION AND ACCEPTANCE TERMS Supplies/services will be inspected/accepted at: ▇▇▇▇ INSPECT AT INSPECT BY ACCEPT AT ACCEPT BY 0001 N/A N/A N/A N/A 0002 N/A N/A N/A N/A 0002AA Destination Government Destination Government 0002AB Destination Government Destination Government 0002AC Destination Government Destination Government 0002AD 0002 Destination Government Destination Government 0003 N/A N/A N/A N/A 0003AA Destination Government Destination Government 0003AB Destination Government Destination Government 0003AC Destination Government Destination Government 0003AD Destination Government Destination Government 0004 N/A N/A N/A N/A 0004AA Destination Government Destination Government 0004AB Destination Government Destination Government 0004AC Destination Government Destination Government 0004AD Destination Government Destination Government 0005 Destination Government Destination Government 0006 Destination Government Destination Government 0007 Destination Government Destination Government 0008 Destination Government Destination Government 0009 Destination Government Destination Government 0010 Destination Government Destination Government 0011 Destination Government Destination Government 0012 Destination Government Destination Government 0013 Destination Government Destination Government 0014 Destination Government Destination Government 0015 Destination Government Destination Government 0016 Destination Government Destination Government 0017 Destination Government Destination Government 0018 Destination Government Destination Government 0019 Destination Government Destination Government 0020 Destination Government Destination Government 0021 0029 Destination Government Destination Government 0022 0030 Destination Government Destination Government 0031 Destination Government Destination Government 0032 Destination Government Destination Government 0033 Destination Government Destination Government 0034 Destination Government Destination Government 0035 Destination Government Destination Government 0036 Destination Government Destination Government 0037 Destination Government Destination Government 0038 Destination Government Destination Government CLAUSES INCORPORATED BY REFERENCE 52.246-2 Inspection Of Supplies--Fixed Price AUG 1996 52.246-16 Responsibility For Supplies APR 1984 252.217-7005 Inspection and ▇▇▇▇▇▇ of Doing Work JUL 2009 252.217-7013 Guarantees DEC 1991 CLAUSES INCORPORATED BY FULL TEXT 52.246HQ E-1-11 HIGHER-LEVEL CONTRACT QUALITY REQUIREMENT (DEC 2014)
(a) The Contractor shall comply with the higher-level quality standard(s) listed below. ANSI/ASQC Q9001 or ISO 9001
(b) The Contractor shall include applicable requirements of the higher-level quality standard(s) listed in paragraph
(a) of this clause and the requirement to flow down such standards, as applicable, to lower-tier subcontracts, in--
(1) Any subcontract for critical and complex items (see 46.203(b) and (c)); or
(2) When the technical requirements of a subcontract require--
(i) Control of such things as design, work operations, in-process control, testing, and inspection; or
(ii) Attention to such factors as organization, planning, work instructions, documentation control, and advanced metrology. (End of clause) CLAUSES INCORPORATED BY FULL TEXT E-246-H013 0001 INSPECTION AND ACCEPTANCE OF DATA (NAVSEA) (OCT 2018SEP 1990) Inspection and acceptance of all data shall be as specified on the attached Contract Data Requirements List(s), DD Form 1423. Applicable to all CLINs. CLAUSES INCORPORATED BY FULL TEXT E-246HQ E-2-H016 INSPECTION AND ACCEPTANCE OF F.O.B. DESTINATION DELIVERIES (NAVSEA) (OCT 2018) Item(s) 0002-0022 - Inspection and acceptance shall be made at destination by a representative of the Government. E-246-H020 0015 QUALITY MANAGEMENT SYSTEM REQUIREMENTS (NAVSEA) (OCT 2018) The Contractor shall provide and maintain a quality management system that, as a minimum, adheres to the requirements of ASQ/ANSI/ISO 9001:2015 “Quality Management Systems – Requirements” and supplemental requirements imposed by this contract. The quality management system procedures, planning, and all other documentation and data that comprise the quality management system shall be made available to the Government for review. Existing quality documents that meet the requirements of this contract may continue to be used. The Government may perform any necessary inspections, verifications, and evaluations to ascertain conformance to requirements and the adequacy of the implementing procedures. The Contractor shall flow down such standards, as applicable, to lower-tier subcontractors under instances covered in FAR 52.246-11(b) or at the direction of the Contracting Officer. The Government reserves the right to disapprove the quality management system or portions thereof when it fails to meet the contractual requirements. CLAUSES INCORPORATED BY FULL TEXT E-246-H022 INSPECTION AND TEST RECORDS (NAVSEA) (JAN 2019) Inspection and test records shall, as a minimum, indicate the nature of the observations, number of observations made, and the number and type of deficiencies found. Data included in inspection and test records shall be complete and accurate, and shall be used for trend analysis and to assess corrective action and effectiveness. The data shall, on request, be identified and made available for on-site review by the Contracting Officer or designated Government representative. CLAUSES INCORPORATED BY FULL TEXT E-246-W002 CERTIFICATE OF COMPLIANCE (NAVSEA) (OCT 2018SEP 2009)
(a) A certification of material shall be provided by the Contractor, one (1) copy to accompany the shipment (in the packing list envelope) and (l) copy mailed to arrive at time of receipt of the shipment. Mark all certificates to the attention of Code 00Q.
(b) The certificate shall state compliance of material with drawing specification and contract/order requirements. The certificate shall as a minimum state the company name, contract/order number, drawing or specification number, and date. The certificate shall state, above the signature of a legally authorized representative of the company, the following: This certification concerns a matter within the jurisdiction of an agency of the United States and the making of a false, fictitious, or fraudulent certification may render the maker subject to prosecution under Title 18, United States Code, Section 1001.
(c) Failure to provide certification at the time of shipment may result in material being rejected and returned at the contractor's expense.
(d) The certificate shall read as follows: I certify that on [insert date], the [insert Contractor’s name] furnished the supplies called for by the Order/Contract No. via [Carrier] on [identify the bill of lading or shipping document] in accordance with all applicable requirements. I further certify that the supplies or services are of the quality specified and conform in all respects with the contract requirements, including specifications, drawings, preservation, packaging, packing, marking requirements, and physical item identification (part number), and are in the quantity shown on this document.
Appears in 1 contract
Sources: Contract
Part Identification. All items within the kit, set, installation hardware or material shall be suitably segregated and identified within the unit pack(s) or shipping container by part number and/or national stock number. Refer to the above cited MIL-STD for marking of assorted (related-unrelated) items. D-247-W001 PROHIBITED PACKING MATERIALS (NAVSEA) (OCT 2018) The use of asbestos, excelsior, newspaper or shredded paper (all types including waxed paper, computer paper and similar hygroscopic or non-neutral material) is prohibited. In addition, the use of yellow wrapping or packaging material is prohibited except where used for the containment of radioactive material. Loose fill polystyrene is prohibited for shipboard use. Section E - Inspection and Acceptance INSPECTION AND ACCEPTANCE TERMS Supplies/services will be inspected/accepted at: ▇▇▇▇ INSPECT AT INSPECT BY ACCEPT AT ACCEPT BY 0001 N/A N/A N/A N/A 0002 N/A N/A N/A N/A 0002AA Destination Government Destination Government 0002AB Destination Government Destination Government 0002AC Destination Government Destination Government 0002AD 0002 Destination Government Destination Government 0003 N/A N/A N/A N/A 0003AA Destination Government Destination Government 0003AB Destination Government Destination Government 0003AC Destination Government Destination Government 0003AD Destination Government Destination Government 0004 N/A N/A N/A N/A 0004AA Destination Government Destination Government 0004AB Destination Government Destination Government 0004AC Destination Government Destination Government 0004AD Destination Government Destination Government 0005 Destination Government Destination Government 0006 Destination Government Destination Government 0007 Destination Government Destination Government 0008 Destination Government Destination Government 0009 Destination Government Destination Government 0010 Destination Government Destination Government 0011 Destination Government Destination Government 0012 Destination Government Destination Government 0013 Destination Government Destination Government 0014 Destination Government Destination Government 0015 Destination Government Destination Government 0016 Destination Government Destination Government 0017 Destination Government Destination Government 0018 Destination Government Destination Government 0019 Destination Government Destination Government 0020 Destination Government Destination Government 0021 Destination Government Destination Government 0022 Destination Government Destination Government CLAUSES INCORPORATED BY REFERENCE 52.246-2 Inspection Of Supplies--Fixed Price AUG 1996 52.246-3 Inspection Of Supplies Cost-Reimbursement MAY 2001 52.246-4 Inspection Of Services--Fixed Price AUG 1996 52.246-5 Inspection Of Services Cost-Reimbursement APR 1984 52.246-16 Responsibility For Supplies APR 1984 CLAUSES INCORPORATED BY FULL TEXT 52.246-11 HIGHER-LEVEL CONTRACT QUALITY REQUIREMENT (DEC 2014)
(a) The Contractor shall comply with the higher-level quality standard(s) listed below. ANSI/ASQC Q9001 or ISO 9001
(b) The Contractor shall include applicable requirements of the higher-level quality standard(s) listed in paragraph
(a) of this clause and the requirement to flow down such standards, as applicable, to lower-tier subcontracts, in--
(1) Any subcontract for critical and complex items (see 46.203(b) and (c)); or
(2) When the technical requirements of a subcontract require--
(i) Control of such things as design, work operations, in-process control, testing, and inspection; or
(ii) Attention to such factors as organization, planning, work instructions, documentation control, and advanced metrology. (End of clause) CLAUSES INCORPORATED BY FULL TEXT E-246-H013 INSPECTION AND ACCEPTANCE OF DATA (NAVSEA) (OCT 2018) Inspection and acceptance of all data shall be as specified on the attached Contract Data Requirements List(s), DD Form 1423. CLAUSES INCORPORATED BY FULL TEXT E-246-H014 INSPECTION AND ACCEPTANCE OF ENGINEERING SERVICES (NAVSEA) (OCT 2018) Item(s) 0001-0002 - Inspection and acceptance shall be made by the Contracting Officer’s Representative (COR) or a designated representative of the Government. E-246-H015 INSPECTION AND ACCEPTANCE OF ENGINEERING SERVICES IN SUPPORT OF SUPPLIES (NAVSEA) (FEB 2019) Item(s) 0001-0002 - For engineering services in support of delivered supplies, authorization for services shall be made by the PCO or Contracting Officer’s Representative (COR). Inspection and acceptance shall be made by the COR or a designated representative of the Government following the receipt of the certification of performance on the delivered hardware. E-246-H016 INSPECTION AND ACCEPTANCE OF F.O.B. DESTINATION DELIVERIES (NAVSEA) (OCT 2018) Item(s) 00020001-0022 0021 - Inspection and acceptance shall be made at destination by a representative of the Government. E-246-H020 QUALITY MANAGEMENT SYSTEM REQUIREMENTS W007 NOTIFICATION OF INSPECTION OR TEST (NAVSEA) (OCT 2018) The Contractor shall provide and maintain agrees to notify the COR, in writing, when the material will be inspected and/or tested. A minimum of 30 working days is required to arrange such a quality management system that, as a minimum, adheres to the requirements visit. 0001 From date of ASQ/ANSI/ISO 9001:2015 “Quality Management Systems – Requirements” and supplemental requirements imposed by this contractaward through 1,829 days after. The quality management system procedures, planning, and all other documentation and data that comprise the quality management system shall 1 EACH To be made available to the Government for review. Existing quality documents that meet the requirements of this contract may continue to be used. The Government may perform any necessary inspections, verifications, and evaluations to ascertain conformance to requirements and the adequacy of the implementing procedures. The Contractor shall flow down such standards, as applicable, to lower-tier subcontractors under instances covered in FAR 52.246-11(b) or determined at the direction Task Order level To be determined at the Task Order level 0002 From date of award through 1,829 days after. 1 EACH To be determined at the Contracting OfficerTask Order level To be determined at the Task Order level 0003 Ordering Period Year 1. The To be ordered from date of award through 365 days after. 7 EACH N/A N/A 0004 Ordering Period Year 1. To be ordered from date of award through 365 days after. 7 EACH N/A N/A 0005 Ordering Period Year 1. To be ordered from date of award through 365 days after. 7 EACH N/A N/A 0006 Ordering Period Year 1. To be ordered from date of award through 365 days after. 7 EACH N/A N/A 0007 Ordering Period Year 2. To be ordered from 366 days after date of award through 731 days after. 7 EACH N/A N/A 0008 Ordering Period Year 2. To be ordered from 366 days after date of award through 731 days after. 7 EACH N/A N/A 0009 Ordering Period Year 2. To be ordered from 366 days after date of award through 731 days after. 7 EACH N/A N/A 0010 Ordering Period Year 3. To be ordered from 732 days after date of award through 1,097 days after. 7 EACH N/A N/A 0011 Ordering Period Year 3. To be ordered from 732 days after date of award through 1,097 days after. 7 EACH N/A N/A Section F - Deliveries or Performance ORDERING PERIOD 0012 Ordering Period Year 3. To be ordered from 732 days after date of award through 1,097 days after. 7 EACH N/A N/A 0013 Ordering Period Year 4. To be ordered from 1,098 days after date of award through 1,463 days after. 7 EACH N/A N/A 0014 Ordering Period Year 4. To be ordered from 1,098 days after date of award through 1,463 days after. 7 EACH N/A N/A 0015 Ordering Period Year 4. To be ordered from 1,098 days after date of award through 1,463 days after. 7 EACH N/A N/A 0016 Ordering Period Year 5. To be ordered from 1,464 days after date of award through 1,829 days after. 7 EACH N/A N/A 0017 Ordering Period Year 5. To be ordered from 1,464 days after date of award through 1,829 days after. 7 EACH N/A N/A 0018 Ordering Period Year 5. To be ordered from 1,464 days after date of award through 1,829 days after. 7 EACH N/A N/A 0019 Ordering Period Year 1. To be ordered from date of award through 365 days after. 1 EACH N/A N/A 0020 Ordering Period Year 1. To be ordered from date of award through 365 days after. 1 EACH N/A N/A 0021 Ordering Period Year 1. To be ordered from date of award through 365 days after. 1 EACH N/A N/A 0022 From date of award through 1,829 days after. 1 EACH N/A N/A CLAUSES INCORPORATED BY REFERENCE 52.211-17 Delivery of Excess Quantities SEP 1989 52.242-15 Stop-Work Order AUG 1989 52.242-15 Alt I Stop-Work Order (Aug 1989) - Alternate I APR 1984 52.242-17 Government reserves the right to disapprove the quality management system or portions thereof when it fails to meet the contractual requirements. Delay Of Work APR 1984 52.247-34 F.O.B. Destination NOV 1991 52.247-48 F.O.B. Destination--Evidence Of Shipment FEB 1999 CLAUSES INCORPORATED BY FULL TEXT E-246F-211-H022 INSPECTION AND TEST RECORDS H021 DELIVERY OR PERFORMANCE (NAVSEA) (JAN MAR 2019) Inspection and test records shall, as a minimum, indicate For proposal purposes the nature estimated date of the observations, number of observations made, and the number and type of deficiencies found. Data included in inspection and test records shall be complete and accurate, and shall be used for trend analysis and to assess corrective action and effectivenesscontract award is June 2020. The data shall, on request, government reserves the right to award sooner or later if necessary. The start and end dates below will be identified and made available for onupdated accordingly upon task order award. F-211-site review by the Contracting Officer or designated Government representative. CLAUSES INCORPORATED BY FULL TEXT E-246-W002 CERTIFICATE OF COMPLIANCE W001 PARTIAL DELIVERIES (NAVSEA) (OCT 2018)
) Partial deliveries will not be accepted without specific approval from the Contracting Officer. F-242-H001 CONTRACTOR NOTICE REGARDING LATE DELIVERY (aNAVSEA) A certification of material shall be provided by (OCT 2018) In the Contractor, one (1) copy to accompany event the shipment (contractor anticipates or encounters difficulty in the packing list envelope) and (l) copy mailed to arrive at time of receipt of the shipment. Mark all certificates to the attention of Code 00Q.
(b) The certificate shall state compliance of material with drawing specification and contract/order requirements. The certificate shall as a minimum state the company name, contract/order number, drawing or specification number, and date. The certificate shall state, above the signature of a legally authorized representative of the company, the following: This certification concerns a matter within the jurisdiction of an agency of the United States and the making of a false, fictitious, or fraudulent certification may render the maker subject to prosecution under Title 18, United States Code, Section 1001.
(c) Failure to provide certification at the time of shipment may result in material being rejected and returned at the contractor's expense.
(d) The certificate shall read as follows: I certify that on [insert date], the [insert Contractor’s name] furnished the supplies called for by the Order/Contract No. via [Carrier] on [identify the bill of lading or shipping document] in accordance with all applicable requirements. I further certify that the supplies or services are of the quality specified and conform in all respects complying with the contract requirementsdelivery schedule or date, including specificationsthe contractor shall immediately notify, drawingsin writing, preservationthe Contracting Officer and the cognizant Contract Administration Services Office, packagingif assigned. The notice shall give the pertinent details; however, packingsuch notice shall not constitute a waiver by the Government of any contract delivery schedule, marking requirements, and physical item identification or of any rights or remedies provided by law or under this contract. F-246-H001 PERFORMANCE FOR ENGINEERING SERVICES IN SUPPORT OF SUPPLIES (part numberNAVSEA) (FEB 2019) Item(s) 0001 - Engineering services in support of supplies delivered under Item(s) 0003-0021 shall be performed within 12 months after unconditional acceptance of the last unit of the foregoing supply items. The Contractor shall notify the Contracting Officer in writing via the Contract Administration Office (CAO) of the actual date of unconditional acceptance of the last unit of the foregoing item(s), with a copy to the COR identified in Section G. F-247-H001 DELIVERY OF DATA (NAVSEA) (OCT 2018) All data to be furnished under this contract shall be delivered prepaid to the destination(s) and are in at the quantity shown time(s) specified on this document.the Contract Data Requirements List(s), DD Form 1423. Section G - Contract Administration Data CLAUSES INCORPORATED BY REFERENCE 252.232-7003 Electronic Submission of Payment Requests and Receiving Reports DEC 2018 CLAUSES INCORPORATED BY FULL TEXT 252.232-7006 WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (DEC 2018)
Appears in 1 contract
Sources: Contract
Part Identification. All items within the kit, set, installation hardware or material shall be suitably segregated and identified within the unit pack(s) or shipping container by part number and/or national stock number. Refer to the above cited MIL-STD for marking of assorted (related-unrelated) items. D-247-W001 PROHIBITED PACKING MATERIALS (NAVSEA) (OCT 2018) The use of asbestos, excelsior, newspaper or shredded paper (all types including waxed paper, computer paper and similar hygroscopic or non-neutral material) is prohibited. In addition, the use of yellow wrapping or packaging material is prohibited except where used for the containment of radioactive material. Loose fill polystyrene is prohibited for shipboard use. Section E - Inspection and Acceptance INSPECTION AND ACCEPTANCE TERMS Supplies/services will be inspected/accepted at: ▇▇▇▇ INSPECT AT INSPECT BY ACCEPT AT ACCEPT BY 0001 N/A N/A N/A N/A 0002 N/A N/A N/A N/A 0002AA Destination Government Destination Government 0002AB Destination Government Destination Government 0002AC Destination Government Destination Government 0002AD 0002 Destination Government Destination Government 0003 N/A N/A N/A N/A 0003AA Destination Government Destination Government 0003AB Destination Government Destination Government 0003AC Destination Government Destination Government 0003AD Destination Government Destination Government 0004 N/A N/A N/A N/A 0004AA Destination Government Destination Government 0004AB Destination Government Destination Government 0004AC Destination Government Destination Government 0004AD Destination Government Destination Government 0005 Destination Government Destination Government 0006 Destination Government Destination Government 0007 Destination Government Destination Government 0008 Destination Government Destination Government 0009 Destination Government Destination Government 0010 Destination Government Destination Government 0011 Destination Government Destination Government 0012 Destination Government Destination Government 0013 Destination Government Destination Government 0014 Destination Government Destination Government 0015 Destination Government Destination Government 0016 Destination Government Destination Government 0017 Destination Government Destination Government 0018 Destination Government Destination Government 0019 Destination Government Destination Government 0020 Destination Government Destination Government 0021 Destination Government Destination Government 0022 Destination Government Destination Government 0023 Destination Government Destination Government 0024 Destination Government Destination Government 0025 Destination Government Destination Government 0026 Destination Government Destination Government 0027 Destination Government Destination Government 0028 Destination Government Destination Government 0029 Destination Government Destination Government CLAUSES INCORPORATED BY REFERENCE 52.246-2 Inspection Of Supplies--Fixed Price AUG 1996 52.246-16 Responsibility For Supplies APR 1984 CLAUSES INCORPORATED BY FULL TEXT 52.246-11 HIGHER-LEVEL CONTRACT QUALITY REQUIREMENT (DEC 2014)
(a) The Contractor shall comply with the higher-level quality standard(s) listed below. ANSI/ASQC Q9001 or ISO 9001
(b) The Contractor shall include applicable requirements of the higher-level quality standard(s) listed in paragraph
(a) of this clause and the requirement to flow down such standards, as applicable, to lower-tier subcontracts, in--
(1) Any subcontract for critical and complex items (see 46.203(b) and (c)); or
(2) When the technical requirements of a subcontract require--
(i) Control of such things as design, work operations, in-process control, testing, and inspection; or
(ii) Attention to such factors as organization, planning, work instructions, documentation control, and advanced metrology. (End of clause) CLAUSES INCORPORATED BY FULL TEXT E-246-H013 INSPECTION AND ACCEPTANCE OF DATA (NAVSEA) (OCT 2018) Inspection and acceptance of all data shall be as specified on the attached Contract Data Requirements List(s), DD Form 1423. CLAUSES INCORPORATED BY FULL TEXT E-246-H016 INSPECTION AND ACCEPTANCE OF F.O.B. DESTINATION DELIVERIES (NAVSEA) (OCT 2018) Item(s) 00020001-0022 0028 - Inspection and acceptance shall be made at destination by a representative of the Government. E-246-H020 QUALITY MANAGEMENT SYSTEM REQUIREMENTS H019 INSPECTION AND ACCEPTANCE OF PROVISIONING TECHNICAL DOCUMENTATION (NAVSEA) (OCT 2018) The Contractor shall provide and maintain a quality management system that, as a minimum, adheres to the requirements of ASQ/ANSI/ISO 9001:2015 “Quality Management Systems – Requirements” and supplemental requirements imposed by this contract. The quality management system procedures, planning, and all other documentation and data that comprise the quality management system shall be made available to the Government for review. Existing quality documents that meet the requirements of this contract may continue to be used. Item(s) 0001-0028 - The Government may perform accept, conditionally accept, or reject the Provisioning Technical Documentation (PTD) within sixty days after its delivery, or as specified on the applicable CDRL(s). A notice of conditional acceptance shall state any necessary inspectionscorrective action required by the Contractor. If PTD is rejected, verificationsthe Contractor may be required, and evaluations to ascertain conformance to requirements and at the adequacy option of the implementing proceduresGovernment, to correct any or all of the PTD. The Contractor shall flow down such standardsat no additional cost to the Government make any necessary changes, as applicablemodifications, or corrections to lower-tier subcontractors under instances covered in FAR 52.246-11(b) or at the direction of the Contracting OfficerPTD. The Government reserves shall take action on the right to disapprove corrected PTD within the quality management system time limit specified above. Government action under this requirement shall not affect or portions thereof when limit any other rights it fails to meet the contractual requirementsmay have under this contract. CLAUSES INCORPORATED BY FULL TEXT E-246-H022 INSPECTION AND TEST RECORDS (NAVSEA) (JAN 2019) Inspection and test records shall, as a minimum, indicate the nature of the observations, number of observations made, and the number and type of deficiencies found. Data included in inspection and test records shall be complete and accurate, and shall be used for trend analysis and to assess corrective action and effectiveness. The data shall, on request, be identified and made available for on-site review by the Contracting Officer or designated Government representative. CLAUSES INCORPORATED BY FULL TEXT E-246-W002 CERTIFICATE OF COMPLIANCE (NAVSEA) (OCT 2018)
(a) A certification of material shall be provided by the Contractor, one (1) copy to accompany the shipment (in the packing list envelope) and (l) copy mailed to arrive at time of receipt of the shipment. Mark all certificates to the attention of Code 00Q.
(b) The certificate shall state compliance of material with drawing specification and contract/order requirements. The certificate shall as a minimum state the company name, contract/order number, drawing or specification number, and date. The certificate shall state, above the signature of a legally authorized representative of the company, the following: This certification concerns a matter within the jurisdiction of an agency of the United States and the making of a false, fictitious, or fraudulent certification may render the maker subject to prosecution under Title 18, United States Code, Section 1001.
(c) Failure to provide certification at the time of shipment may result in material being rejected and returned at the contractor's expense.
(d) The certificate shall read as follows: I certify that on [insert date], the [insert Contractor’s name] furnished the supplies called for by the Order/Contract No. via [Carrier] on [identify the bill of lading or shipping document] in accordance with all applicable requirements. I further certify that the supplies or services are of the quality specified and conform in all respects with the contract requirements, including specifications, drawings, preservation, packaging, packing, marking requirements, and physical item identification (part number), and are in the quantity shown on this document.
Appears in 1 contract
Sources: Contract
Part Identification. All items within the kit, set, installation hardware or material shall be suitably segregated and identified within the unit pack(s) or shipping container by part number and/or national stock number. Refer to the above cited MIL-STD for marking of assorted (related-unrelated) items. D-247-W001 PROHIBITED PACKING MATERIALS (NAVSEA) (OCT 2018) The use of asbestos, excelsior, newspaper or shredded paper (all types including waxed paper, computer paper and similar hygroscopic or non-neutral material) is prohibited. In addition, the use of yellow wrapping or packaging material is prohibited except where used for the containment of radioactive material. Loose fill polystyrene is prohibited for shipboard use. Section E - Inspection and Acceptance INSPECTION AND ACCEPTANCE TERMS Supplies/services will be inspected/accepted at: ▇▇▇▇ INSPECT AT INSPECT BY ACCEPT AT ACCEPT BY 0001 N/A N/A N/A N/A 0002 N/A N/A N/A N/A 0002AA Destination Government Destination Government 0002AB Destination Government Destination Government 0002AC Destination Government Destination Government 0002AD Destination Government Destination Government 0003 N/A N/A N/A N/A 0003AA Destination Government Destination Government 0003AB Destination Government Destination Government 0003AC Destination Government Destination Government 0003AD Destination Government Destination Government 0004 N/A N/A N/A N/A 0004AA Destination Government Destination Government 0004AB Destination Government Destination Government 0004AC Destination Government Destination Government 0004AD Destination Government Destination Government 0005 Destination Government Destination Government 0006 Destination Government Destination Government 0007 Destination Government Destination Government 0008 Destination Government Destination Government 0009 Destination Government Destination Government 0010 Destination Government Destination Government 0011 Destination Government Destination Government 0012 Destination Government Destination Government 0013 Destination Government Destination Government 0014 Destination Government Destination Government 0015 Destination Government Destination Government 0016 Destination Government Destination Government 0017 Destination Government Destination Government 0018 Destination Government Destination Government 0019 Destination Government Destination Government 0020 Destination Government Destination Government 0021 Destination Government Destination Government 0022 Destination Government Destination Government CLAUSES INCORPORATED BY REFERENCE 52.246-2 Inspection Of Supplies--Fixed Price AUG 1996 52.246-16 Responsibility For Supplies APR 1984 CLAUSES INCORPORATED BY FULL TEXT 52.246-11 HIGHER-LEVEL CONTRACT QUALITY REQUIREMENT (DEC 2014)
(a) The Contractor shall comply with the higher-level quality standard(s) listed below. ANSI/ASQC Q9001 or ISO 9001
(b) The Contractor shall include applicable requirements of the higher-level quality standard(s) listed in paragraph
(a) of this clause and the requirement to flow down such standards, as applicable, to lower-tier subcontracts, in--
(1) Any subcontract for critical and complex items (see 46.203(b) and (c)); or
(2) When the technical requirements of a subcontract require--
(i) Control of such things as design, work operations, in-process control, testing, and inspection; or
(ii) Attention to such factors as organization, planning, work instructions, documentation control, and advanced metrology. (End of clause) CLAUSES INCORPORATED BY FULL TEXT E-246-H013 INSPECTION AND ACCEPTANCE OF DATA (NAVSEA) (OCT 2018) Inspection and acceptance of all data shall be as specified on the attached Contract Data Requirements List(s), DD Form 1423. CLAUSES INCORPORATED BY FULL TEXT E-246-H016 INSPECTION AND ACCEPTANCE OF F.O.B. DESTINATION DELIVERIES (NAVSEA) (OCT 2018) Item(s) 0002-0022 - Inspection and acceptance shall be made at destination by a representative of the Government. E-246-H020 QUALITY MANAGEMENT SYSTEM REQUIREMENTS (NAVSEA) (OCT 2018) The Contractor shall provide and maintain a quality management system that, as a minimum, adheres to the requirements of ASQ/ANSI/ISO 9001:2015 “Quality Management Systems – Requirements” and supplemental requirements imposed by this contract. The quality management system procedures, planning, and all other documentation and data that comprise the quality management system shall be made available to the Government for review. Existing quality documents that meet the requirements of this contract may continue to be used. The Government may perform any necessary inspections, verifications, and evaluations to ascertain conformance to requirements and the adequacy of the implementing procedures. The Contractor shall flow down such standards, as applicable, to lower-tier subcontractors under instances covered in FAR 52.246-11(b) or at the direction of the Contracting Officer. The Government reserves the right to disapprove the quality management system or portions thereof when it fails to meet the contractual requirements. CLAUSES INCORPORATED BY FULL TEXT E-246-H022 INSPECTION AND TEST RECORDS (NAVSEA) (JAN 2019) Inspection and test records shall, as a minimum, indicate the nature of the observations, number of observations made, and the number and type of deficiencies found. Data included in inspection and test records shall be complete and accurate, and shall be used for trend analysis and to assess corrective action and effectiveness. The data shall, on request, be identified and made available for on-site review by the Contracting Officer or designated Government representative. CLAUSES INCORPORATED BY FULL TEXT E-246-W002 CERTIFICATE OF COMPLIANCE (NAVSEA) (OCT 2018)
(a) A certification of material shall be provided by the Contractor, one (1) copy to accompany the shipment (in the packing list envelope) and (l) copy mailed to arrive at time of receipt of the shipment. Mark all certificates to the attention of Code 00Q.
(b) The certificate shall state compliance of material with drawing specification and contract/order requirements. The certificate shall as a minimum state the company name, contract/order number, drawing or specification number, and date. The certificate shall state, above the signature of a legally authorized representative of the company, the following: This certification concerns a matter within the jurisdiction of an agency of the United States and the making of a false, fictitious, or fraudulent certification may render the maker subject to prosecution under Title 18, United States Code, Section 1001.
(c) Failure to provide certification at the time of shipment may result in material being rejected and returned at the contractor's expense.
(d) The certificate shall read as follows: I certify that on [insert date], the [insert Contractor’s name] furnished the supplies called for by the Order/Contract No. via [Carrier] on [identify the bill of lading or shipping document] in accordance with all applicable requirements. I further certify that the supplies or services are of the quality specified and conform in all respects with the contract requirements, including specifications, drawings, preservation, packaging, packing, marking requirements, and physical item identification (part number), and are in the quantity shown on this document.
Appears in 1 contract
Sources: Solicitation, Offer and Award
Part Identification. All items within the kit, set, installation hardware or material shall be suitably segregated and identified within the unit pack(s) or shipping container by part number and/or national stock number. Refer to the above cited MIL-STD for marking of assorted (related-unrelated) items. D-247-W001 PROHIBITED PACKING MATERIALS (NAVSEA) (OCT 2018) The use of asbestos, excelsior, newspaper or shredded paper (all types including waxed paper, computer paper and similar hygroscopic or non-neutral material) is prohibited. In addition, the use of yellow wrapping or packaging material is prohibited except where used for the containment of radioactive material. Loose fill polystyrene is prohibited for shipboard use. Section E - Inspection and Acceptance INSPECTION AND ACCEPTANCE TERMS Supplies/services will be inspected/accepted at: ▇▇▇▇ INSPECT AT INSPECT BY ACCEPT AT ACCEPT BY 0001 N/A N/A N/A N/A Origin Government Origin Government 0002 N/A N/A N/A N/A 0002AA Destination Origin Government Destination Government 0002AB Destination Government Destination Government 0002AC Destination Government Destination Government 0002AD Destination Government Destination Origin Government 0003 N/A N/A N/A N/A 0003AA Destination Origin Government Destination Government 0003AB Destination Government Destination Government 0003AC Destination Government Destination Government 0003AD Destination Government Destination Origin Government 0004 N/A N/A N/A N/A 0004AA Destination Origin Government Destination Government 0004AB Destination Government Destination Government 0004AC Destination Government Destination Government 0004AD Destination Government Destination Origin Government 0005 Destination Origin Government Destination Origin Government 0006 Destination Origin Government Destination Origin Government 0007 Destination Origin Government Destination Origin Government 0008 Destination Origin Government Destination Origin Government 0009 Destination Origin Government Destination Origin Government 0010 Destination Origin Government Destination Origin Government 0011 Destination Origin Government Destination Origin Government 0012 Destination Origin Government Destination Origin Government 0013 Destination 1001 Origin Government Destination Origin Government 0014 Destination 1002 Origin Government Destination Origin Government 0015 Destination 1003 Origin Government Destination Origin Government 0016 Destination 1004 Origin Government Destination Origin Government 0017 Destination 1005 Origin Government Destination Origin Government 0018 Destination 1006 Origin Government Destination Origin Government 0019 Destination 2001 Origin Government Destination Origin Government 0020 Destination 2002 Origin Government Destination Origin Government 0021 Destination 2003 Origin Government Destination Origin Government 0022 2004 Origin Government Origin Government 2005 Origin Government Origin Government 2006 Origin Government Origin Government 3001 Origin Government Origin Government 3002 Origin Government Origin Government 3003 Origin Government Origin Government 3004 Origin Government Origin Government 3005 Origin Government Origin Government 3006 Origin Government Origin Government 4001 Origin Government Origin Government 4002 Origin Government Origin Government 4003 Origin Government Origin Government 4004 Origin Government Origin Government 4005 Origin Government Origin Government 4006 Origin Government Origin Government 5001 Destination Government Destination Government CLAUSES INCORPORATED BY REFERENCE 52.246-2 Inspection Of Supplies--Fixed Price AUG 1996 52.246-11 Higher-Level Contract Quality Requirement DEC 2014 52.246-15 Certificate of Conformance APR 1984 52.246-16 Responsibility For Supplies APR 1984 CLAUSES INCORPORATED BY FULL TEXT 52.246-11 HIGHER-LEVEL CONTRACT QUALITY REQUIREMENT (DEC 2014)
(a) The Contractor shall comply with the higher-level quality standard(s) listed below. ANSI/ASQC Q9001 or ISO 9001
(b) The Contractor shall include applicable requirements of the higher-level quality standard(s) listed in paragraph
(a) of this clause and the requirement to flow down such standards, as applicable, to lower-tier subcontracts, in--
(1) Any subcontract for critical and complex items (see 46.203(b) and (c)); or
(2) When the technical requirements of a subcontract require--
(i) Control of such things as design, work operations, in-process control, testing, and inspection; or
(ii) Attention to such factors as organization, planning, work instructions, documentation control, and advanced metrology. (End of clause) CLAUSES INCORPORATED BY FULL TEXT E-246-H013 INSPECTION AND ACCEPTANCE OF DATA (NAVSEA) (OCT 2018) Inspection and acceptance of all data shall be as specified on the attached Contract Data Requirements List(s), DD Form 1423. CLAUSES INCORPORATED BY FULL TEXT E-246-H016 H017 INSPECTION AND ACCEPTANCE OF F.O.B. DESTINATION ORIGIN DELIVERIES (NAVSEA) (OCT 2018) Item(s) 0002-0022 0 001 - 4006 - Inspection and acceptance shall be made at destination source by a representative of the cognizant Contract Administration Office or other representative of the Government. E-246-H020 QUALITY MANAGEMENT SYSTEM REQUIREMENTS (NAVSEA) (OCT 2018) The Contractor shall provide and maintain a quality management system that, as a minimum, adheres to the requirements of ASQ/ANSI/ISO 9001:2015 “Quality Management Systems – Requirements” and supplemental requirements imposed by this contract. The quality management system procedures, planning, and all other documentation and data that comprise the quality management system shall be made available to the Government for review. Existing quality documents that meet the requirements of this contract may continue to be used. The Government may perform any necessary inspections, verifications, and evaluations to ascertain conformance to requirements and the adequacy of the implementing procedures. The Contractor shall flow down such standards, as applicable, to lower-tier subcontractors under instances covered in FAR 52.246-11(b) or at the direction of the Contracting Officer. The Government reserves the right to disapprove the quality management system or portions thereof when it fails to meet the contractual requirements. CLAUSES INCORPORATED BY FULL TEXT E-246-H022 INSPECTION AND TEST RECORDS (NAVSEA) (JAN 2019) Inspection and test records shall, as a minimum, indicate the nature of the observations, number of observations made, and the number and type of deficiencies found. Data included in inspection and test records shall be complete and accurate, and shall be used for trend analysis and to assess corrective action and effectiveness. The data shall, on request, be identified and made available for on-site review by the Contracting Officer or designated Government representative. Section F - Deliveries or Performance DELIVERY INFORMATION CLIN DELIVERY DATE QUANTITY SHIP TO ADDRESS DODAAC / CAGE 0001 60 dys. ADC 20 ABERDEEN TEST CENTER ▇▇▇▇▇▇ ▇▇▇▇▇▇ ▇▇▇ ▇▇▇▇▇▇▇▇ ▇▇▇▇, BUILDING 358 ABERDEEN PROVING GROUND MD 21005-5059 W81C5M ▇▇▇-▇▇▇-▇▇▇▇ FOB: Other 0002 60 dys. ADC 22 (SAME AS PREVIOUS LOCATION) FOB: Other W81C5M 0003 60 dys. ADC 22 (SAME AS PREVIOUS LOCATION) FOB: Other W81C5M 0004 60 dys. ADC 22 (SAME AS PREVIOUS LOCATION) FOB: Other W81C5M 0005 60 dys. ADC 22 (SAME AS PREVIOUS LOCATION) FOB: Other W81C5M 0006 60 dys. ADC 85 (SAME AS PREVIOUS LOCATION) FOB: Other W81C5M 0007 180 dys. ADC 250 Q95056 . FLT CBD & BALLISTIC PPE SUSTAINMENT FAC CHESAPEAKE ▇▇▇▇ ▇▇▇▇▇▇ ▇▇▇▇▇ ▇▇ ▇▇▇▇ ▇ ▇▇▇ ▇▇ ▇▇▇▇▇▇▇▇▇▇ ▇▇ ▇▇▇▇▇-2655 FOB: Other Q95056 0008 180 dys. ADC 500 (SAME AS PREVIOUS LOCATION) FOB: Other Q95056 0009 180 dys. ADC 4,250 (SAME AS PREVIOUS LOCATION) FOB: Other Q95056 0010 180 dys. ADC 2,750 (SAME AS PREVIOUS LOCATION) FOB: Other Q95056 0011 180 dys. ADC 500 (SAME AS PREVIOUS LOCATION) FOB: Other Q95056 0012 180 dys. ADC 2,750 (SAME AS PREVIOUS LOCATION) FOB: Other Q95056 1001 180 dys. ADC 250 (SAME AS PREVIOUS LOCATION) FOB: Other Q95056 1002 180 dys. ADC 500 (SAME AS PREVIOUS LOCATION) FOB: Other Q95056 1003 180 dys. ADC 4,250 (SAME AS PREVIOUS LOCATION) FOB: Other Q95056 1004 180 dys. ADC 2,750 (SAME AS PREVIOUS LOCATION) FOB: Other Q95056 1005 180 dys. ADC 500 (SAME AS PREVIOUS LOCATION) FOB: Other Q95056 1006 180 dys. ADC 2,750 (SAME AS PREVIOUS LOCATION) FOB: Other Q95056 2001 180 dys. ADC 250 (SAME AS PREVIOUS LOCATION) FOB: Other Q95056 2002 180 dys. ADC 500 (SAME AS PREVIOUS LOCATION) FOB: Other Q95056 2003 180 dys. ADC 4,250 (SAME AS PREVIOUS LOCATION) FOB: Other Q95056 2004 180 dys. ADC 2,750 (SAME AS PREVIOUS LOCATION) FOB: Other Q95056 2005 180 dys. ADC 500 (SAME AS PREVIOUS LOCATION) FOB: Other Q95056 2006 180 dys. ADC 2,750 (SAME AS PREVIOUS LOCATION) FOB: Other Q95056 3001 180 dys. ADC 250 (SAME AS PREVIOUS LOCATION) FOB: Other Q95056 3002 180 dys. ADC 500 (SAME AS PREVIOUS LOCATION) FOB: Other Q95056 3003 180 dys. ADC 4,250 (SAME AS PREVIOUS LOCATION) FOB: Other Q95056 3004 180 dys. ADC 2,750 (SAME AS PREVIOUS LOCATION) FOB: Other Q95056 3005 180 dys. ADC 500 (SAME AS PREVIOUS LOCATION) FOB: Other Q95056 3006 180 dys. ADC 2,750 (SAME AS PREVIOUS LOCATION) FOB: Other Q95056 4001 180 dys. ADC 250 (SAME AS PREVIOUS LOCATION) FOB: Other Q95056 4002 180 dys. ADC 500 (SAME AS PREVIOUS LOCATION) FOB: Other Q95056 4003 180 dys. ADC 4,250 (SAME AS PREVIOUS LOCATION) FOB: Other Q95056 4004 180 dys. ADC 2,750 (SAME AS PREVIOUS LOCATION) FOB: Other Q95056 4005 180 dys. ADC 500 (SAME AS PREVIOUS LOCATION) FOB: Other Q95056 4006 180 dys. ADC 2,750 (SAME AS PREVIOUS LOCATION) FOB: Other Q95056 5001 180 dys. ADC 1 N61331 . NSWC PANAMA CITY ▇▇▇ ▇▇▇▇▇▇ ▇▇▇ RECEIVING BUILDING #100 PANAMA CITY FL 32407-7001 N61331 CLAUSES INCORPORATED BY FULL TEXT E-246REFERENCE 52.211-W002 CERTIFICATE OF COMPLIANCE (NAVSEA) (OCT 2018)
(a) A certification 17 Delivery of material shall be provided by Excess Quantities SEP 1989 52.242-15 Stop-Work Order AUG 1989 52.242-17 Government Delay Of Work APR 1984 52.247-29 F.O.B. Origin FEB 2006 52.247-34 F.O.B. Destination NOV 1991 This contract will become effective on the Contractor, one (1) copy to accompany date of award and will continue in effect during the shipment (in the packing list envelope) and (l) copy mailed to arrive at time of receipt of the shipment. Mark all certificates to the attention of Code 00Q.
(b) The certificate shall state compliance of material with drawing specification and contract/order requirements. The certificate shall as a minimum state the company name, contract/order number, drawing or specification number, and date. The certificate shall state, above the signature of a legally authorized representative of the company, the following: This certification concerns a matter within the jurisdiction of an agency of the United States and the making of a false, fictitious, or fraudulent certification may render the maker subject to prosecution under Title 18, United States Code, Section 1001.
(c) Failure to provide certification at the time of shipment may result in material being rejected and returned at the contractor's expense.
(d) The certificate shall read as follows: I certify that on [insert date], the [insert Contractor’s name] furnished the supplies called for by the Order/Contract No. via [Carrier] on [identify the bill of lading or shipping document] in accordance with all applicable requirements. I further certify that the supplies or services are of the quality specified and conform in all respects with the contract requirements, including specifications, drawings, preservation, packaging, packing, marking requirements, and physical item identification (part number), and are in the quantity shown on this document.period ending twelve
Appears in 1 contract
Sources: Contract
Part Identification. All items within the kit, set, installation hardware or material shall be suitably segregated and identified within the unit pack(s) or shipping container by part number and/or national stock number. Refer to the above cited MIL-STD for marking of assorted (related-unrelated) items. D-247-W001 PROHIBITED PACKING MATERIALS (NAVSEA) (OCT 2018) The use of asbestos, excelsior, newspaper or shredded paper (all types including waxed paper, computer paper and similar hygroscopic or non-neutral material) is prohibited. In addition, the use of yellow wrapping or packaging material is prohibited except where used for the containment of radioactive material. Loose fill polystyrene is prohibited for shipboard use. Section E - Inspection and Acceptance INSPECTION AND ACCEPTANCE TERMS Supplies/services will be inspected/accepted at: ▇▇▇▇ INSPECT AT INSPECT BY ACCEPT AT ACCEPT BY 0001 Destination Government Destination Government 0002 Destination Government Destination Government 0003 Destination Government Destination Government 0004 Destination Government Destination Government 000401 N/A N/A N/A N/A 0002 000402 N/A N/A N/A N/A 0002AA Destination Government Destination Government 0002AB Destination Government Destination Government 0002AC Destination Government Destination Government 0002AD Destination Government Destination Government 0003 0005 N/A N/A N/A N/A 0003AA Destination Government Destination Government 0003AB Destination Government Destination Government 0003AC Destination Government Destination Government 0003AD Destination Government Destination Government 0004 N/A N/A N/A N/A 0004AA Destination Government Destination Government 0004AB Destination Government Destination Government 0004AC Destination Government Destination Government 0004AD Destination Government Destination Government 0005 Destination Government Destination Government 0006 Destination Government Destination Government 0007 Destination Government Destination Government 0008 Destination Government Destination Government 0009 Destination Government Destination Government 0010 Destination Government Destination Government 0011 Destination Government Destination Government 0012 Destination Government Destination Government 0013 Destination Government Destination Government 0014 Destination Government Destination Government 0015 Destination Government Destination Government 0016 Destination Government Destination Government 0017 Destination Government Destination Government 0018 Destination Government Destination Government 0019 Destination Government Destination Government 0020 Destination Government Destination Government 0021 Destination Government Destination Government 0022 Destination Government Destination Government 0023 Destination Government Destination Government 002301 N/A N/A N/A N/A 002302 N/A N/A N/A N/A 0024 Destination Government Destination Government 0025 Destination Government Destination Government 0026 Destination Government Destination Government 0027 Destination Government Destination Government 0028 Destination Government Destination Government 0029 Destination Government Destination Government 0030 Destination Government Destination Government 0031 Destination Government Destination Government 0032 Destination Government Destination Government 0033 Destination Government Destination Government CLAUSES INCORPORATED BY REFERENCE 52.246-2 Inspection Of Supplies--Fixed Price AUG 1996 52.246-16 Responsibility For Supplies APR 1984 252.217-7005 Inspection and ▇▇▇▇▇▇ of Doing Work JUL 2009 252.217-7013 Guarantees DEC 1991 CLAUSES INCORPORATED BY FULL TEXT 52.246E-246-11 HIGHER-LEVEL CONTRACT QUALITY REQUIREMENT H010 TESTS AND TRIALS--BASIC (DEC 2014)
NAVSEA) (aOCT 2018) During the conduct of required tests and trials, the vessel shall be under the control of the vessel's Commander and crew with representatives of the Contractor and the Government on board to determine whether or not the work done by the Contractor has been satisfactorily performed. The Contractor shall comply with provide and install all fittings and appliances which may be necessary for dock and sea trials to enable the higher-level quality standard(s) listed below. ANSI/ASQC Q9001 or ISO 9001
(b) The Contractor shall include applicable representatives of the Government to determine whether the requirements of the higher-level quality standard(s) listed in paragraph
(a) of this clause contract have been met, and the requirement to flow down Contractor shall install and remove instruments and apparatus furnished by the Government for such standardstrials, as applicable, to lower-tier subcontracts, in--
(1) Any subcontract for critical and complex items (see 46.203(b) and (c)); or
(2) When required by the technical requirements of a subcontract require--
(i) Control of such things as design, work operations, in-process control, testing, and inspection; or
(ii) Attention to such factors as organization, planning, work instructions, documentation control, and advanced metrologyspecifications. (End of clause) CLAUSES INCORPORATED BY FULL TEXT E-246-H013 INSPECTION AND ACCEPTANCE OF DATA (NAVSEA) (OCT 2018) Inspection and acceptance of all data shall be as specified on the attached Contract Data Requirements List(s), DD Form 1423. CLAUSES INCORPORATED BY FULL TEXT E-246-H016 INSPECTION AND ACCEPTANCE OF F.O.B. DESTINATION DELIVERIES (NAVSEA) (OCT 2018) Item(s) 0002-0022 CLINs 0001 - 0033 - Inspection and acceptance shall be made at destination by a representative of the Government. E-246-H020 QUALITY MANAGEMENT SYSTEM REQUIREMENTS (NAVSEA) (OCT 2018) The Contractor shall provide and maintain a quality management system that, as a minimum, adheres to the requirements of ASQ/ANSI/ISO 9001:2015 “Quality Management Systems – Requirements” and supplemental requirements imposed by this contract. The quality management system procedures, planning, and all other documentation and data that comprise the quality management system shall be made available to the Government for review. Existing quality documents that meet the requirements of this contract may continue to be used. The Government may perform any necessary inspections, verifications, and evaluations to ascertain conformance to requirements and the adequacy of the implementing procedures. The Contractor shall flow down such standards, as applicable, to lower-tier subcontractors under instances covered in FAR 52.246-11(b) or at the direction of the Contracting Officer. The Government reserves the right to disapprove the quality management system or portions thereof when it fails to meet the contractual requirements. Section F - Deliveries or Performance DELIVERY INFORMATION CLIN DELIVERY DATE QUANTITY SHIP TO ADDRESS DODAAC / CAGE 0001 14-JAN-2022 1 SWRMC CODE 300 ▇▇▇▇▇ ▇▇▇▇ ▇▇▇▇ ▇▇▇▇▇▇▇ ▇▇▇▇▇▇ SUITE 1 BUILDING 94 FLOOR ▇ ▇▇▇ ▇▇▇▇▇ ▇▇ ▇▇▇▇▇-5205 619-556-6807 FOB: Destination N55236 0003 14-JAN-2022 1 (SAME AS PREVIOUS LOCATION) FOB: Destination N55236 0004 14-JAN-2022 1 (SAME AS PREVIOUS LOCATION) FOB: Destination N55236 000401 N/A N/A N/A N/A 000402 N/A N/A N/A N/A 0005 N/A N/A N/A N/A 0006 14-JAN-2022 1 SWRMC CODE 300 ▇▇▇▇▇ ▇▇▇▇ ▇▇▇▇ ▇▇▇▇▇▇▇ ▇▇▇▇▇▇ SUITE 1 BUILDING 94 FLOOR ▇ ▇▇▇ ▇▇▇▇▇ ▇▇ ▇▇▇▇▇-5205 619-556-6807 FOB: Destination N55236 0007 14-JAN-2022 1 (SAME AS PREVIOUS LOCATION) FOB: Destination N55236 0008 14-JAN-2022 1 (SAME AS PREVIOUS LOCATION) FOB: Destination N55236 0009 14-JAN-2022 1 (SAME AS PREVIOUS LOCATION) FOB: Destination N55236 0010 14-JAN-2022 1 (SAME AS PREVIOUS LOCATION) FOB: Destination N55236 0011 14-JAN-2022 1 (SAME AS PREVIOUS LOCATION) FOB: Destination N55236 0012 14-JAN-2022 1 (SAME AS PREVIOUS LOCATION) FOB: Destination N55236 0013 14-JAN-2022 1 (SAME AS PREVIOUS LOCATION) FOB: Destination N55236 0014 14-JAN-2022 1 (SAME AS PREVIOUS LOCATION) FOB: Destination N55236 0015 14-JAN-2022 1 (SAME AS PREVIOUS LOCATION) FOB: Destination N55236 0016 14-JAN-2022 1 (SAME AS PREVIOUS LOCATION) FOB: Destination N55236 0017 14-JAN-2022 1 (SAME AS PREVIOUS LOCATION) FOB: Destination N55236 0018 14-JAN-2022 1 (SAME AS PREVIOUS LOCATION) FOB: Destination N55236 0019 14-JAN-2022 1 (SAME AS PREVIOUS LOCATION) FOB: Destination N55236 0020 14-JAN-2022 1 (SAME AS PREVIOUS LOCATION) FOB: Destination N55236 0022 14-JAN-2022 1 (SAME AS PREVIOUS LOCATION) FOB: Destination N55236 0023 14-JAN-2022 1 (SAME AS PREVIOUS LOCATION) FOB: Destination N55236 002301 N/A N/A N/A N/A 002302 N/A N/A N/A N/A 0024 14-JAN-2022 1 SWRMC CODE 300 ▇▇▇▇▇ ▇▇▇▇ ▇▇▇▇ ▇▇▇▇▇▇▇ ▇▇▇▇▇▇ SUITE 1 BUILDING 94 FLOOR ▇ ▇▇▇ ▇▇▇▇▇ ▇▇ ▇▇▇▇▇-5205 619-556-6807 FOB: Destination N55236 0025 14-JAN-2022 1 (SAME AS PREVIOUS LOCATION) FOB: Destination N55236 0026 14-JAN-2022 1 (SAME AS PREVIOUS LOCATION) FOB: Destination N55236 0029 14-JAN-2022 1 (SAME AS PREVIOUS LOCATION) FOB: Destination N55236 0030 14-JAN-2022 1 (SAME AS PREVIOUS LOCATION) FOB: Destination N55236 0032 14-JAN-2022 1 (SAME AS PREVIOUS LOCATION) FOB: Destination N55236 0033 14-JAN-2022 1 (SAME AS PREVIOUS LOCATION) FOB: Destination N55236 CLAUSES INCORPORATED BY REFERENCE 52.211-17 Delivery of Excess Quantities SEP 1989 52.242-15 Stop-Work Order AUG 1989 52.242-17 Government Delay Of Work APR 1984 52.247-34 F.O.B. Destination NOV 1991 CLAUSES INCORPORATED BY FULL TEXT E-246F-242-H022 INSPECTION AND TEST RECORDS (NAVSEA) (JAN 2019) Inspection and test records shall, as a minimum, indicate the nature of the observations, number of observations made, and the number and type of deficiencies found. Data included in inspection and test records shall be complete and accurate, and shall be used for trend analysis and to assess corrective action and effectiveness. The data shall, on request, be identified and made available for on-site review by the Contracting Officer or designated Government representative. CLAUSES INCORPORATED BY FULL TEXT E-246-W002 CERTIFICATE OF COMPLIANCE H001 CONTRACTOR NOTICE REGARDING LATE DELIVERY (NAVSEA) (OCT 2018)
) In the event the contractor anticipates or encounters difficulty in complying with the contract delivery schedule or date, the contractor shall immediately notify, in writing, the Contracting Officer and the cognizant Contract Administration Services Office, if assigned. The notice shall give the pertinent details; however, such notice shall not constitute a waiver by the Government of any contract delivery schedule, or of any rights or remedies provided by law or under this contract. F-247-H001 DELIVERY OF DATA (aNAVSEA) A certification of material (OCT 2018) All data to be furnished under this contract shall be provided delivered prepaid to the destination(s) and at the time(s) specified on the Contract Data Requirements List(s), DD Form 1423. F-247-H004 RESTRICTIONS FOR SHIPPING TO MILITARY AIR OR WATER PORT/ TERMINAL (NAVSEA) (OCT 2018) The Contractor shall not ship directly to a military air or water port/terminal without authorization by the Contractorcognizant Contract Administration Office. Section G - Contract Administration Data SMALL BUSINESS SUBCONTRACTING REQUIREMENT For the purposes of this provision, one the small business subcontracting requirement is that prime contractor(s) subcontract to small businesses over the course of the entire period of performance of the contract to the extent that small business subcontracting goal averages twenty percent (120%) copy annually of direct costs related to accompany production work for the shipment contract, minus the cost of any directed subcontracts. The 20% goal is inclusive of the congressionally mandated five percent (5%) goal for small disadvantaged business concerns. Offerors are encouraged to subcontract with small disadvantaged businesses, women-owned small businesses, veteran-owned small businesses, service-disabled veteran-owned small businesses, and HUB-Zone small businesses. The Offerors should also strive to meet the 20% small business subcontracting goal using the aforementioned subcategories of small businesses to the greatest extent possible. The extent to which the contractor does or does not meet, the small business subcontracting requirements of this provision during actual contract performance, as documented by compliance reports submitted by the Contractor in accordance with Contract Data Requirements List (CDRL) (A001) will be evaluated under the packing list envelope) and price proposal. The Contracting Officer will validate whether or not the required small business subcontracting goal has been met by evaluating the reports submitted by the prime via the Electronic Subcontracting Reporting System (l) copy mailed eSRS). The Government reserves the right, on a case basis, to arrive deviate from requirements of this clause based on circumstances at time of receipt of the shipment. Mark all certificates to the attention of Code 00Q.
(b) The certificate shall state compliance of material with drawing specification and contract/order requirements. The certificate shall as a minimum state the company name, contract/order number, drawing or specification number, and date. The certificate shall state, above the signature of a legally authorized representative of the company, the following: This certification concerns a matter within the jurisdiction of an agency of the United States and the making of a false, fictitious, or fraudulent certification may render the maker subject to prosecution under Title 18, United States Code, Section 1001contract performance.
(c) Failure to provide certification at the time of shipment may result in material being rejected and returned at the contractor's expense.
(d) The certificate shall read as follows: I certify that on [insert date], the [insert Contractor’s name] furnished the supplies called for by the Order/Contract No. via [Carrier] on [identify the bill of lading or shipping document] in accordance with all applicable requirements. I further certify that the supplies or services are of the quality specified and conform in all respects with the contract requirements, including specifications, drawings, preservation, packaging, packing, marking requirements, and physical item identification (part number), and are in the quantity shown on this document.
Appears in 1 contract
Sources: Contract
Part Identification. All items within the kit, set, installation hardware or material shall be suitably segregated and identified within the unit pack(s) or shipping container by part number and/or national stock number. Refer to the above cited MIL-STD for marking of assorted (related-unrelated) items. D-247-W001 PROHIBITED PACKING MATERIALS (NAVSEA) (OCT 2018) The use of asbestos, excelsior, newspaper or shredded paper (all types including waxed paper, computer paper and similar hygroscopic or non-neutral material) is prohibited. In addition, the use of yellow wrapping or packaging material is prohibited except where used for the containment of radioactive material. Loose fill polystyrene is prohibited for shipboard use. Section E - Inspection and Acceptance INSPECTION AND ACCEPTANCE TERMS Supplies/services will be inspected/accepted at: ▇▇▇▇ INSPECT AT INSPECT BY ACCEPT AT ACCEPT BY 0001 N/A N/A N/A N/A 0002 N/A N/A N/A N/A 0002AA Destination Government Destination Government 0002AB Destination Government Destination Government 0002AC Destination Government Destination Government 0002AD 0002 Destination Government Destination Government 0003 N/A N/A N/A N/A 0003AA Destination Government Destination Government 0003AB Destination Government Destination Government 0003AC Destination Government Destination Government 0003AD Destination Government Destination Government 0004 N/A N/A N/A N/A 0004AA Destination Government Destination Government 0004AB Destination Government Destination Government 0004AC Destination Government Destination Government 0004AD Destination Government Destination Government 0005 Destination Government Destination Government 0006 Destination Government Destination Government 0007 Destination Government Destination Government 0008 Destination Government Destination Government 0009 Destination Government Destination Government 0010 Destination Government Destination Government 0011 Destination Government Destination Government 0012 Destination Government Destination Government 0013 Destination Government Destination Government 0014 Destination Government Destination Government 0015 Destination Government Destination Government 0016 Destination Government Destination Government 0017 Destination Government Destination Government 0018 Destination Government Destination Government 0019 Destination Government Destination Government 0020 Destination Government Destination Government 0021 Destination Government Destination Government 0022 Destination Government Destination Government 0023 Destination Government Destination Government 0024 Destination Government Destination Government 0025 Destination Government Destination Government 0026 Destination Government Destination Government 0027 Destination Government Destination Government 0028 Destination Government Destination Government 0029 Destination Government Destination Government 0030 Destination Government Destination Government 0031 Destination Government Destination Government 0032 Destination Government Destination Government 0033 Destination Government Destination Government 0034 Destination Government Destination Government CLAUSES INCORPORATED BY REFERENCE 52.246-2 Inspection Of Supplies--Fixed Price AUG 1996 52.246-16 Responsibility For Supplies APR 1984 252.217-7005 Inspection and ▇▇▇▇▇▇ of Doing Work JUL 2009 252.217-7013 Guarantees DEC 1991 CLAUSES INCORPORATED BY FULL TEXT 52.246E-246-11 HIGHER-LEVEL CONTRACT QUALITY REQUIREMENT H010 TESTS AND TRIALS--BASIC (DEC 2014)
NAVSEA) (aOCT 2018) During the conduct of required tests and trials, the vessel shall be under the control of the vessel's Commander and crew with representatives of the Contractor and the Government on board to determine whether or not the work done by the Contractor has been satisfactorily performed. The Contractor shall comply with provide and install all fittings and appliances which may be necessary for dock and sea trials to enable the higher-level quality standard(s) listed below. ANSI/ASQC Q9001 or ISO 9001
(b) The Contractor shall include applicable representatives of the Government to determine whether the requirements of the higher-level quality standard(s) listed in paragraph
(a) of this clause contract have been met, and the requirement to flow down Contractor shall install and remove instruments and apparatus furnished by the Government for such standardstrials, as applicable, to lower-tier subcontracts, in--
(1) Any subcontract for critical and complex items (see 46.203(b) and (c)); or
(2) When required by the technical requirements of a subcontract require--
(i) Control of such things as design, work operations, in-process control, testing, and inspection; or
(ii) Attention to such factors as organization, planning, work instructions, documentation control, and advanced metrologyspecifications. (End of clause) CLAUSES INCORPORATED BY FULL TEXT E-246-H013 INSPECTION AND ACCEPTANCE OF DATA (NAVSEA) (OCT 2018) Inspection and acceptance of all data shall be as specified on the attached Contract Data Requirements List(s), DD Form 1423. CLAUSES INCORPORATED BY FULL TEXT E-246-H016 INSPECTION AND ACCEPTANCE OF F.O.B. DESTINATION DELIVERIES (NAVSEA) (OCT 2018) Item(s) 0002-0022 - Inspection and acceptance shall be made at destination by a representative of the Government. E-246-H020 QUALITY MANAGEMENT SYSTEM REQUIREMENTS (NAVSEA) (OCT 2018) The Contractor shall provide and maintain a quality management system that, as a minimum, adheres to the requirements of ASQ/ANSI/ISO 9001:2015 “Quality Management Systems – Requirements” and supplemental requirements imposed by this contract. The quality management system procedures, planning, and all other documentation and data that comprise the quality management system shall be made available to the Government for review. Existing quality documents that meet the requirements of this contract may continue to be used. The Government may perform any necessary inspections, verifications, and evaluations to ascertain conformance to requirements and the adequacy of the implementing procedures. The Contractor shall flow down such standards, as applicable, to lower-tier subcontractors under instances covered in FAR 52.246-11(b) or at the direction of the Contracting Officer. The Government reserves the right to disapprove the quality management system or portions thereof when it fails to meet the contractual requirements. Section F - Deliveries or Performance DELIVERY INFORMATION CLIN DELIVERY DATE QUANTITY SHIP TO ADDRESS DODAAC / CAGE 0001 14-JUN-2022 1 N/A FOB: Destination 0002 14-JUN-2022 1 N/A FOB: Destination 0003 14-JUN-2022 1 N/A FOB: Destination 0004 14-JUN-2022 1 N/A FOB: Destination 0005 14-JUN-2022 1 N/A FOB: Destination 0006 14-JUN-2022 1 N/A FOB: Destination 0007 14-JUN-2022 1 N/A FOB: Destination 0008 14-JUN-2022 1 N/A FOB: Destination 0009 14-JUN-2022 1 N/A FOB: Destination 0010 14-JUN-2022 1 N/A FOB: Destination 0011 14-JUN-2022 1 N/A FOB: Destination 0012 14-JUN-2022 1 N/A FOB: Destination 0013 14-JUN-2022 1 N/A FOB: Destination 0014 14-JUN-2022 1 N/A FOB: Destination 0015 14-JUN-2022 1 N/A FOB: Destination 0016 14-JUN-2022 1 N/A FOB: Destination 0017 14-JUN-2022 1 N/A FOB: Destination 0018 14-JUN-2022 1 N/A FOB: Destination 0019 14-JUN-2022 1 N/A FOB: Destination 0020 14-JUN-2022 1 N/A FOB: Destination 0021 14-JUN-2022 1 N/A FOB: Destination 0022 14-JUN-2022 1 N/A FOB: Destination 0023 14-JUN-2022 1 N/A FOB: Destination 0024 14-JUN-2022 1 N/A FOB: Destination 0025 14-JUN-2022 1 N/A FOB: Destination 0026 14-JUN-2022 1 N/A FOB: Destination 0027 14-JUN-2022 1 N/A FOB: Destination 0028 14-JUN-2022 1 N/A FOB: Destination 0029 14-JUN-2022 1 N/A FOB: Destination 0030 14-JUN-2022 1 N/A FOB: Destination 0031 14-JUN-2022 1 N/A FOB: Destination 0032 14-JUN-2022 1 N/A FOB: Destination 0033 14-JUN-2022 1 N/A FOB: Destination 0034 14-JUN-2022 1 N/A FOB: Destination CLAUSES INCORPORATED BY REFERENCE 52.211-17 Delivery of Excess Quantities SEP 1989 52.242-15 Stop-Work Order AUG 1989 52.242-17 Government Delay Of Work APR 1984 52.247-34 F.O.B. Destination NOV 1991 CLAUSES INCORPORATED BY FULL TEXT E-246F-247-H022 INSPECTION AND TEST RECORDS (NAVSEA) (JAN 2019) Inspection and test records shall, as a minimum, indicate the nature of the observations, number of observations made, and the number and type of deficiencies found. Data included in inspection and test records shall be complete and accurate, and shall be used for trend analysis and to assess corrective action and effectiveness. The data shall, on request, be identified and made available for on-site review by the Contracting Officer or designated Government representative. CLAUSES INCORPORATED BY FULL TEXT E-246-W002 CERTIFICATE OF COMPLIANCE H004 RESTRICTIONS FOR SHIPPING TO MILITARY AIR OR WATER PORT/ TERMINAL (NAVSEA) (OCT 2018)
(a) A certification of material The Contractor shall be provided not ship directly to a military air or water port/terminal without authorization by the Contractor, one (1) copy to accompany the shipment (in the packing list envelope) and (l) copy mailed to arrive at time of receipt of the shipmentcognizant Contract Administration Office. Mark all certificates to the attention of Code 00Q.
(b) The certificate shall state compliance of material with drawing specification and contract/order requirements. The certificate shall as a minimum state the company name, contract/order number, drawing or specification number, and date. The certificate shall state, above the signature of a legally authorized representative of the company, the following: This certification concerns a matter within the jurisdiction of an agency of the United States and the making of a false, fictitious, or fraudulent certification may render the maker subject to prosecution under Title 18, United States Code, Section 1001.
(c) Failure to provide certification at the time of shipment may result in material being rejected and returned at the contractor's expense.
(d) The certificate shall read as follows: I certify that on [insert date], the [insert Contractor’s name] furnished the supplies called for by the Order/G - Contract No. via [Carrier] on [identify the bill of lading or shipping document] in accordance with all applicable requirements. I further certify that the supplies or services are of the quality specified and conform in all respects with the contract requirements, including specifications, drawings, preservation, packaging, packing, marking requirements, and physical item identification (part number), and are in the quantity shown on this document.Administration Data PROGRESS PAYMENT RETENTIONS
Appears in 1 contract
Sources: Contract