Common use of OPERATOR PROFILE Clause in Contracts

OPERATOR PROFILE. 1.1 The TCP® Hourly Rate is based on the Operator Profile declared by the Operator. Any modifications to the Operator Profile or changes in geographical or operating environment must be reported promptly to P&WC and may result in an adjustment to the TCP® Hourly Rate referenced in this Agreement. 1.2 The Operator Profile under this Agreement is for Engines used in the regional airline flight profile submitted by the Operator as indicated below and which are operated within the limitations specified in the applicable section of the aircraft flight manual. 1.3 The Fleet under this Agreement shall consist of 46 installed Engines and 0 spares as referenced in Annex “A”. 1.3.1 Annual utilization of each engine of 2,088 Engine Operating Hours + / - 5 %; 1.3.2 Annual average cycle ratio of 1.2 cycle/hour + / - 5 %; 1.3.3 Overhaul interval achieved at 24,000 cycles for gas generator and 15,000 cycles for power section Modules; 1.3.4 HSI interval achieved at 6,000 cycles for the hot section, interval subject to adjustment based on ECTM® and borescope inspections results; 1.3.5 Gas Generator midlife inspection achieved at 12,000 cycles 1.3.6 Power Section — midlife inspection achieved at 7,500 cycles 1.3.7 Fuel Nozzle Kit refurbishment interval achieved at 600 hours;