Notify Supplier Sample Clauses

Open Split View

Download

Share

Cite

Notify Supplier immediately if the Supplier Equipment is malfunctioning and provide a full description of the problem in writing;

Sample 1

Save

Copy

Related to Notify Supplier

• Third Party Suppliers If Licensee wishes to obtain the Compound, Product and/or Licensed Product from a Third Party source, Licensee shall notify Pfizer through MPP of the intended source prior to making any commitments to purchase the Compound, Product and/or Licensed Product. Pfizer will determine at its sole discretion whether and on what terms to grant a license to the intended source to produce the Compound, Product and/or Licensed Product or inform Licensee whether such license already exists.

• Supplier A manufacturer, fabricator, distributor, supplier, or vendor of goods or equipment in connection with the Work, or any other party having a Contract or Purchase Order with the Contractor or with a Subcontractor to furnish materials or equipment to be incorporated in the Work by the Contractor or a Subcontractor.

• PRODUCT MANUFACTURER'S SUPPLIERS Only those dealers/distributors listed by the manufacturer will be considered authorized to act on behalf of the Product Manufacturer.

• Product Supply The Parties shall reasonably cooperate and assist each other in transferring ownership of Product drug product and/or Product drug substance (such material, CERTAIN CONFIDENTIAL PORTIONS OF THIS EXHIBIT WERE OMITTED AND REPLACED WITH “[***]”. A COMPLETE VERSION OF THIS EXHIBIT HAS BEEN FILED SEPARATELY WITH THE SECRETARY OF THE SECURITIES AND EXCHANGE COMMISSION PURSUANT TO AN APPLICATION REQUESTING CONFIDENTIAL TREATMENT PURSUANT TO RULE 406 PROMULGATED UNDER THE SECURITIES ACT OF 1933, AS AMENDED. collectively, the “Product Lots”) set forth in Exhibit A attached hereto as promptly as reasonably practicable following the Effective Date; provided, however, that neither Party shall be required to pay money to any Third Party, commence any litigation with, or offer or grant any accommodation (financial or otherwise) to any Third Party. Such Product Lots shall be delivered EXW (Ex Works) (Incoterms 2010) AMGEN, Thousand Oaks, California. Any expense for shipment shall be borne by AKERO (including any import or export duties or taxes). Subject to the terms of this Section 5.4 and Section 6.2 (Additional AMGEN Warranties), AMGEN transfers the Product Lots to AKERO “as is”, and makes no other representation to AKERO in connection therewith. The Parties have entered into a Quality Agreement substantially in the form attached hereto as Exhibit F, dated as of the date hereof, governing the quality of the Product Lots to be supplied pursuant to this Section 5.4. For the avoidance of doubt, Product Lots consisting of drug product as set forth in Exhibit A supplied pursuant to this Section 5.4 shall be labeled for their intended clinical use as set forth in Exhibit A and the labeling of any Product drug product manufactured after the Effective Date shall be the responsibility of AKERO. Except for the Licensed Materials and such Product Lots to be transferred to AKERO, AKERO shall be responsible for, and shall bear the cost of, obtaining (whether by manufacturing or causing to be manufactured) research, clinical and commercial supplies of the Product. From and after the Effective Date, AKERO shall be responsible for all costs and expenses in connection with the storage of, and any stability studies performed on, the Product Lots.

• Customers; Suppliers Executive does not have, and at any time during the term of this Agreement shall not have, any employment with or any direct or indirect interest in (as owner, partner, shareholder, employee, director, officer, agent, consultant or otherwise) any customer of or supplier to Company.

• Infringing Products or Services If the use of any Products or Services is enjoined (collectively, “Infringing Products”), Supplier shall at its expense procure the right for DXC to continue using or receiving the Infringing Products. If Supplier is unable to do so, Supplier shall at its expense (and at Indemnitees’ option): (i) replace the Infringing Products with non-infringing Products or Services of equivalent form, function and performance; or (ii) modify the Infringing Products to be non-infringing without detracting from form, function or performance; or

• Suppliers and Customers (a) The Company has adequate sources of supply for its business as currently conducted and as proposed to be conducted. The Company has good relationships with all of its material sources of supply of goods and services and does not anticipate any material problem with any such material sources of supply.

• Payment for Forest Products Delivered Purchaser agrees to pay the State for delivered forest products at the following rate: $0.00/MBF $250.00/MBF for incorrect species delivery* $20/mbf for Utility logs (Adjusted Gross). Purchaser agrees to increase the above delivered payment rate as approved by the State in the event the location of delivery is changed per the G-026.2 clause. Purchaser will not be billed for any delivered logs that are scaled as containing metal. *When two or more log sorts from this project are delivered to the same destination, the species contained in them are not eligible for the species price reduction. P-036.2 Missorts and Payment Reduction for Delivered Forest Products Forest Products delivered that do not meet the sorting specifications in G-022.2 are considered mis-sorts. Purchaser receiving mis-sort Forest Products is required to pay the State at the bid price under this contract. However, when mis-sorted Forest Products amount to more than 5% of the total delivered sort volume, Purchaser may request approval for payment reduction for delivered volume exceeding the mis-sort threshold. Requests for payment reduction must be submitted to the State in writing prior to contract expiration. Eligibility for mis-sort payment reduction is subject to State approval and shall be determined by the State’s delivered product analysis. Forest Products determined by the State eligible for mis-sort price reduction are not eligible for any other price adjustments. Payment reduction for Forest Products deemed mis-sorted will be calculated as follows: Payment Reduction = (B x M) x R Where: B = Bid rate from P-028.2 clause M = Mis-sorted volume exceeding threshold excluding utility R = Reduction factor* 0.2 for diameter mis-sort 0.3 for high quality mis-sort *Logs eligible for payment reduction based on multiple reduction factors will be calculated at the higher payment reduction factor. Third-party scaling organization information is required to determine Xxxxxxxx mbf for payment reduction purposes. Value will be derived from the applicable sort value as described in this contract. Scale information for determining mis-sort payment reduction eligibility must be obtained from roll-out scale. Truck-ramp, sample scaling, and/or bundle scaling information is not acceptable for determining eligibility. Purchaser’s exclusive remedy for mis-sorts shall be the payment reduction described in this clause, notwithstanding other provisions in the Uniform Commercial Code P-037.2 Mismanufacture and Payment Reduction for Delivered Forest Products Forest Products delivered that do not meet preferred log length specifications or multiples or combinations of preferred lengths and Forest Products delivered not meeting manufacturing standards as described in clause G-024.2 are considered mis- manufactured. Purchaser receiving mis-manufactured Forest Products is required to pay the State at the bid price under this contract. However, when mis-manufactured Forest Products amount to more than 8% of the total delivered sort volume, Purchaser may request approval for payment reduction for delivered volume exceeding the mis-manufacture threshold. Requests for payment reduction must be submitted to the State in writing prior to contract expiration. Eligibility for mis-manufacture payment reduction is subject to State approval and shall be determined by the State’s delivered product analysis. Forest Products determined by the State eligible for mis-manufacture price reductions are not eligible for any other price adjustments. Payment reduction for Forest Products deemed mis-manufactured will be calculated as follows: Payment Reduction = (B x M) x (0.2) Where: B = Bid rate from P-028.2 clause M = Mis-manufactured volume exceeding threshold excluding utility Third-party scaling organization information is required to determine Xxxxxxxx mbf for payment reduction purposes. Value will be derived from the applicable sort value as described in this contract. Scale information for determining mis-manufacture payment reduction eligibility must be obtained from roll-out scale. Truck-ramp, sample scaling, and/or bundle scaling information is not acceptable for determining eligibility. Purchaser’s exclusive remedy for mis-manufacture shall be the payment reduction described in this clause, notwithstanding other provisions in the Uniform Commercial Code.

• Material Customers and Suppliers Schedule 4.20 sets forth a list of the names of (a) (i) the ten (10) largest customers of each of the STD Business and MED Business (taken as whole, and as measured by revenue) and (ii) the ten (10) largest suppliers, vendors, and service providers by dollar volume of each of the STD Business and MED Business (taken as whole and as measured by revenue), for the twelve (12) month period ended December 31, 2013 and (b) (i) the ten (10) largest customers of each of the STD Business and the MED Business (taken as whole, and as measured by revenue) for the eleven (11) month period ended November 30, 2014 and (ii) the ten (10) largest suppliers, vendors, and service providers by dollar volume of each of the STD Business and MED Business (taken as whole and as measured by revenue), for the ten (10) month period ended October 31, 2014 (each such customer required to be listed on Schedule 4.20, a "Material Customer," and each such supplier, vendor or service provider required to be listed on Schedule 4.20, a "Material Supplier"). During the twelve (12) months prior to the date of this Agreement (A) no Material Customer or Material Supplier has terminated or Threatened to terminate its relationship with the Company, Newco or a Sold Subsidiary, as applicable, (B) no Material Customer or Material Supplier has materially decreased or limited, or, to the Company's Knowledge, Threatened to materially decrease or limit, the services (including lead times), supplies or materials supplied to or purchased from the Company, Newco or a Sold Subsidiary, as applicable, (C) no Material Customer or Material Supplier has materially changed or Threatened to materially change, its business relationship, pricing or terms and conditions of purchase or sale, as the case may be, with the Company, Newco or any Sold Subsidiary, (D) no Material Customer has materially accelerated its purchasing or otherwise made any purchases materially outside of the ordinary course, due to a discontinuation of any product line of the Company, Newco or any of the Sold Subsidiaries, any announced, communicated or anticipated change in pricing or other material terms, and (E) no Material Customer has notified the Company, Newco or any Sold Subsidiary in writing that the Company, Newco or any Sold Subsidiary is required to re-qualify under any customer program of any Material Customer. To the Company's Knowledge, there is not, and, since January 1, 2012, there has not been, any material dispute by and between the Company, Newco or any Sold Subsidiary, on the one hand, and any Material Customer or Material Supplier, on the other hand.

• Bidder Supplied Samples The Commissioner reserves the right to request from the Bidder/Contractor a representative sample(s) of the Product offered at any time prior to or after award of a contract. Unless otherwise instructed, samples shall be furnished within the time specified in the request. Untimely submission of a sample may constitute grounds for rejection of Bid or cancellation of the Contract. Samples must be submitted free of charge and be accompanied by the Bidder’s name and address, any descriptive literature relating to the Product and a statement indicating how and where the sample is to be returned. Where applicable, samples must be properly labeled with the appropriate Bid or Contract reference. A sample may be held by the Commissioner during the entire term of the Contract and for a reasonable period thereafter for comparison with deliveries. At the conclusion of the holding period the sample, where feasible, will be returned as instructed by the Bidder, at the Bidder’s expense and risk. Where the Bidder has failed to fully instruct the Commissioner as to the return of the sample (i.e., mode and place of return, etc.) or refuses to bear the cost of its return, the sample shall become the sole property of the receiving entity at the conclusion of the holding period.