Common use of INTERIOR FINISHING Clause in Contracts

INTERIOR FINISHING. Buyer shall inform Embraer during the customer check list definition (“CCL”), to be held no later than [***] prior to the applicable Aircraft Contractual Delivery Date, of its choice of materials and colours of all and any item of interior finishing such as seat covers, carpet, floor lining on galley areas, side walls and overhead lining, galley lining and curtain, from the choices offered by and available at Embraer. In case Buyer opts to use different materials and/or patterns, Embraer will submit to Buyer a Proposal of Major Change (“PMC”) describing the impacts of such option, if any. Should Buyer not approve such PMC, the interior shall be built according to the choices offered by and available at Embraer. Once defined, for the applicable CCL the choices of interior finishing made by Buyer shall apply to all applicable Aircraft. If Buyer requires an interior finishing for any Aircraft that is different from the original one informed to Embraer, Buyer shall present a written request to Embraer not less than [***] prior to the relevant Aircraft Contractual Delivery Date and Embraer will submit the relevant quotation to the approval of Buyer within [***] from the date such request is received by Embraer. Should Buyer not approve the quotation, the interior of relevant Aircraft shall be built according to the original choice of Buyer. ​ ​ ​ ​ ​

INTERIOR FINISHING. Buyer shall inform Embraer Seller during the customer check list definition (“CCL”), to be held no later than [***] prior to the applicable E170+ Aircraft Contractual Delivery Date, of its choice of materials and colours of all and any item of interior finishing such as seat covers, carpet, floor lining on galley areas, side walls and overhead lining, galley lining and curtain, from the choices offered by and available at EmbraerSeller. In case Buyer opts to use different materials and/or patterns, Embraer Seller will submit to Buyer a Proposal of Major Change (“PMC”) describing the impacts of such option, if any. Should Buyer not approve such PMC, the interior shall be built according to the choices offered by and available at EmbraerSeller. Once defined, for the applicable CCL the choices of interior finishing made by Buyer shall apply to all applicable E170+ Aircraft. If Buyer requires an interior finishing for any Aircraft that is different from the original one informed to EmbraerSeller, Buyer shall present a written request to Embraer Seller not less than [***] prior to the relevant E170+ Aircraft Contractual Delivery Date and Embraer Seller will submit the relevant quotation to the approval of Buyer within [***] from the date such request is received by EmbraerSeller. Should Buyer not approve the quotation, the interior of relevant Aircraft shall be built according to the original choice of Buyer. ​ ​ Attachment “A” to Purchase Agreement COM0247-25 ​ Amendment No. 2 – COM0168-26 Page 1 of 3 ​ ​

INTERIOR FINISHING. Buyer shall inform Embraer during the customer check list definition (“CCL”), to be held no later than [***] prior to the applicable [***] Aircraft Contractual Delivery Date, of its choice of materials and colours of all and any item of interior finishing such as seat covers, carpet, floor lining on galley areas, side walls and overhead lining, galley lining and curtain, from the choices offered by and available at Embraer. In case Buyer opts to use different materials and/or patterns, Embraer will submit to Buyer a Proposal of Major Change (“PMC”) describing the impacts of such option, if any. Should Buyer not approve such PMC, the interior shall be built according to the choices offered by and available at Embraer. Once defined, for the applicable CCL the choices of interior finishing made by Buyer shall apply to all applicable Aircraft. If Buyer requires an interior finishing for any Aircraft that is different from the original one informed to Embraer, Buyer shall present a written request to Embraer not less than [***] prior to the relevant Aircraft Contractual Delivery Date and Embraer will submit the relevant quotation to the approval of Buyer within [***] from the date such request is received by Embraer. Should Buyer not approve the quotation, the interior of relevant Aircraft shall be built according to the original choice of Buyer. ​ ​ ​ ​ ​

INTERIOR FINISHING. Buyer shall inform Embraer Seller during the customer check list definition (“CCL”), to be held no later than [***] prior to the applicable Aircraft Contractual Delivery Date, of its choice of materials and colours of all and any item of interior finishing such as seat covers, carpet, floor lining on galley areas, side walls and overhead lining, galley lining and curtain, from the choices offered by and available at EmbraerSeller. In case Buyer opts to use different materials and/or patterns, Embraer Seller will submit to Buyer a Proposal of Major Change (“PMC”) describing the impacts of such option, if any. Should Buyer not approve such PMC, the interior shall be built according to the choices offered by and available at EmbraerSeller. Once defined, for the applicable CCL the choices of interior finishing made by Buyer shall apply to all applicable Aircraft. If Buyer requires an interior finishing for any Aircraft that is different from the original one informed to EmbraerSeller, Buyer shall present a written request to Embraer Seller not less than [***] prior to the relevant Aircraft Contractual Delivery Date and Embraer Seller will submit the relevant quotation to the approval of Buyer within [***] from the date such request is received by EmbraerSeller. Should Buyer not approve the quotation, the interior of relevant Aircraft shall be built according to the original choice of Buyer. ​ ​ Attachment “A1” to Purchase Agreement COM0247-25 ​ ​ Amendment No. 2 – COM0168-26 Page 1 of 3 ​

INTERIOR FINISHING. Buyer shall inform Embraer during the customer check list definition (“CCL”), to be held no later than [***] prior to the applicable Aircraft Contractual Delivery Date, of its choice of materials and colours of all and any item of interior finishing such as seat covers, carpet, floor lining on galley areas, side walls and overhead lining, galley lining and curtain, from the choices offered by and available at Embraer. In case Buyer opts to use different materials and/or patterns, Embraer will submit to Buyer a Proposal of Major Change (“PMC”) describing the impacts of such option, if any. Should Buyer not approve such PMC, the interior shall be built according to the choices offered by and available at Embraer. Once defined, for the applicable CCL the choices of interior finishing made by Buyer shall apply to all applicable Aircraft. If Buyer requires an interior finishing for any Aircraft that is different from the original one informed to Embraer, Buyer shall present a written request to Embraer not less than [***] prior to the relevant Aircraft Contractual Delivery Date and Embraer will submit the relevant quotation to the approval of Buyer within [***] from the date such request is received by Embraer. Should Buyer not approve the quotation, the interior of relevant Aircraft shall be built according to the original choice of Buyer. ​ ​ ​ ​ Attachment “A4” to Amendment No. 9 to Purchase Agreement COM0028-13 ​ Page 1 of 3 ​ ​

INTERIOR FINISHING. Buyer shall inform Embraer during the customer check list definition (“CCL”), to be held no later than [***] prior to the applicable Aircraft Contractual Delivery Date, of its choice of materials and colours of all and any item of interior finishing such as seat covers, carpet, floor lining on galley areas, side walls and overhead lining, galley lining and curtain, from the choices offered by and available at Embraer. In case Buyer opts to use different materials and/or patterns, Embraer will submit to Buyer a Proposal of Major Change (“PMC”) describing the impacts of such option, if any. Should Buyer not approve such PMC, the interior shall be built according to the choices offered by and available at Embraer. Once defined, for the applicable CCL the choices of interior finishing made by Buyer shall apply to all applicable Aircraft. If Buyer requires an interior finishing for any Aircraft that is different from the original one informed to Embraer, Buyer shall present a written request to Embraer not less than [***] prior to the relevant Aircraft Contractual Delivery Date and Embraer will submit the relevant quotation to the approval of Buyer within [***] from the date such request is received by Embraer. Should Buyer not approve the quotation, the interior of relevant Aircraft shall be built according to the original choice of Buyer. ​ ​ ​ ​ Attachment “A6” to Amendment No. 11 to Purchase Agreement COM0028-13 ​ Page 1 of 3 ​

INTERIOR FINISHING. Buyer shall inform Embraer Seller during the customer check list definition (“CCL”), to be held no later than [***] prior to the applicable Aircraft Contractual Delivery Date, of its choice of materials and colours of all and any item of interior finishing such as seat covers, carpet, floor lining on galley areas, side walls and overhead lining, galley lining and curtain, from the choices offered by and available at EmbraerSeller. In case Buyer opts to use different materials and/or patterns, Embraer Seller will submit to Buyer a Proposal of Major Change (“PMC”) describing the impacts of such option, if any. Should Buyer not approve such PMC, the interior shall be built according to the choices offered by and available at EmbraerSeller. Once defined, for the applicable CCL the choices of interior finishing made by Buyer shall apply to all applicable Aircraft. If Buyer requires an interior finishing for any Aircraft that is different from the original one informed to EmbraerSeller, Buyer shall present a written request to Embraer Seller not less than [***] prior to the relevant Aircraft Contractual Delivery Date and Embraer Seller will submit the relevant quotation to the approval of Buyer within [***] from the date such request is received by EmbraerSeller. Should Buyer not approve the quotation, the interior of relevant Aircraft shall be built according to the original choice of Buyer. ​ ​ ​ ​ ​ Attachment “A2” to Amendment No. 1 to Purchase Agreement COM0247-25 ​ ​

INTERIOR FINISHING. Buyer shall inform Embraer Seller during the customer check list definition (“CCL”), to be held no later than [***] prior to the applicable Aircraft Contractual Delivery Date, of its choice of materials and colours of all and any item of interior finishing such as seat covers, carpet, floor lining on galley areas, side walls and overhead lining, galley lining and curtain, from the choices offered by and available at EmbraerSeller. In case Buyer opts to use different materials and/or patterns, Embraer Seller will submit to Buyer a Proposal of Major Change (“PMC”) describing the impacts of such option, if any. Should Buyer not approve such PMC, the interior shall be built according to the choices offered by and available at EmbraerSeller. Once defined, for the applicable CCL the choices of interior finishing made by Buyer shall apply to all applicable Aircraft. If Buyer requires an interior finishing for any Aircraft that is different from the original one informed to EmbraerSeller, Buyer shall present a written request to Embraer Seller not less than [***] prior to the relevant Aircraft Contractual Delivery Date and Embraer Seller will submit the relevant quotation to the approval of Buyer within [***] from the date such request is received by EmbraerSeller. Should Buyer not approve the quotation, the interior of relevant Aircraft shall be built according to the original choice of Buyer. ​ ​ Attachment “A2” to Purchase Agreement COM0247-25 ​ Amendment No. 2 – COM0168-26 Page 1 of 3 ​ ​

INTERIOR FINISHING. Buyer shall inform Embraer during the customer check list definition (“CCL”), to be held no later than [***] prior to the applicable Aircraft Contractual Delivery Date, of its choice of materials and colours of all and any item of interior finishing such as seat covers, carpet, floor lining on galley areas, side walls and overhead lining, galley lining and curtain, from the choices offered by and available at Embraer. In case Buyer opts to use different materials and/or patterns, Embraer will submit to Buyer a Proposal of Major Change (“PMC”) describing the impacts of such option, if any. Should Buyer not approve such PMC, the interior shall be built according to the choices offered by and available at Embraer. Once defined, for the applicable CCL the choices of interior finishing made by Buyer shall apply to all applicable Aircraft. If Buyer requires an interior finishing for any Aircraft that is different from the original one informed to Embraer, Buyer shall present a written request to Embraer not less than [***] prior to the relevant Aircraft Contractual Delivery Date and Embraer will submit the relevant quotation to the approval of Buyer within [***] from the date such request is received by Embraer. Should Buyer not approve the quotation, the interior of relevant Aircraft shall be built according to the original choice of Buyer. ​ ​ ​ ​ ​

INTERIOR FINISHING. Buyer shall inform Embraer during the customer check list definition (“CCL”), to be held no later than [***] prior to the applicable Aircraft Contractual Delivery Date, of its choice of materials and colours of all and any item of interior finishing such as seat covers, carpet, floor lining on galley areas, side walls and overhead lining, galley lining and curtain, from the choices offered by and available at Embraer. In case Buyer opts to use different materials and/or patterns, Embraer will submit to Buyer a Proposal of Major Change (“PMC”) describing the impacts of such option, if any. Should Buyer not approve such PMC, the interior shall be built according to the choices offered by and available at Embraer. Once defined, for the applicable CCL the choices of interior finishing made by Buyer shall apply to all applicable Aircraft. If Buyer requires an interior finishing for any Aircraft that is different from the original one informed to Embraer, Buyer shall present a written request to Embraer not less than [***] prior to the relevant Aircraft Contractual Delivery Date and Embraer will submit the relevant quotation to the approval of Buyer within thirty [***] from the date such request is received by Embraer. Should Buyer not approve the quotation, the interior of relevant Aircraft shall be built according to the original choice of Buyer. ​ ​ ​ ​​​ ​ ​

INTERIOR FINISHING. Buyer shall inform Embraer during the customer check list definition (“CCL”), to be held no later than [***] prior to the applicable Aircraft Contractual Delivery Date, of its choice of materials and colours of all and any item of interior finishing such as seat covers, carpet, floor lining on galley areas, side walls and overhead lining, galley lining and curtain, from the choices offered by and available at Embraer. In case Buyer opts to use different materials and/or patterns, Embraer will submit to Buyer a Proposal of Major Change (“PMC”) describing the impacts of such option, if any. Should Buyer not approve such PMC, the interior shall be built according to the choices offered by and available at Embraer. Once defined, for the applicable CCL the choices of interior finishing made by Buyer shall apply to all applicable Aircraft. If Buyer requires an interior finishing for any Aircraft that is different from the original one informed to Embraer, Buyer shall present a written request to Embraer not less than [***] prior to the relevant Aircraft Contractual Delivery Date and Embraer will submit the relevant quotation to the approval of Buyer within [***] from the date such request is received by Embraer. Should Buyer not approve the quotation, the interior of relevant Aircraft shall be built according to the original choice of Buyer. ​ ​ ​ ​ ​

INTERIOR FINISHING. Buyer shall inform Embraer during the customer check list definition (“CCL”), to be held no later than [***] prior to the applicable E170+ Aircraft Contractual Delivery Date, of its choice of materials and colours of all and any item of interior finishing such as seat covers, carpet, floor lining on galley areas, side walls and overhead lining, galley lining and curtain, from the choices offered by and available at Embraer. In case Buyer opts to use different materials and/or patterns, Embraer will submit to Buyer a Proposal of Major Change (“PMC”) describing the impacts of such option, if any. Should Buyer not approve such PMC, the interior shall be built according to the choices offered by and available at Embraer. Once defined, for the applicable CCL the choices of interior finishing made by Buyer shall apply to all applicable E170+ Aircraft. If Buyer requires an interior finishing for any Aircraft that is different from the original one informed to Embraer, Buyer shall present a written request to Embraer not less than [***] prior to the relevant E170+ Aircraft Contractual Delivery Date and Embraer will submit the relevant quotation to the approval of Buyer within [***] from the date such request is received by Embraer. Should Buyer not approve the quotation, the interior of relevant Aircraft shall be built according to the original choice of Buyer. ​ ​ ​ ​ ​ ​

INTERIOR FINISHING. Buyer shall inform Embraer during the customer check list definition (“CCL”), to be held no later than [***] prior to the applicable E170+ Aircraft Contractual Delivery Date, of its choice of materials and colours of all and any item of interior finishing such as seat covers, carpet, floor lining on galley areas, side walls and overhead lining, galley lining and curtain, from the choices offered by and available at Embraer. In case Buyer opts to use different materials and/or patterns, Embraer will submit to Buyer a Proposal of Major Change (“PMC”) describing the impacts of such option, if any. Should Buyer not approve such PMC, the interior shall be built according to the choices offered by and available at Embraer. Once defined, for the applicable CCL the choices of interior finishing made by Buyer shall apply to all applicable E170+ Aircraft. If Buyer requires an interior finishing for any Aircraft that is different from the original one informed to Embraer, Buyer shall present a written request to Embraer not less than [***] prior to the relevant E170+ Aircraft Contractual Delivery Date and Embraer will submit the relevant quotation to the approval of Buyer within [***] from the date such request is received by Embraer. Should Buyer not approve the quotation, the interior of relevant Aircraft shall be built according to the original choice of Buyer. ​ ​ ​ ​ ATTACHMENT A21EMBRAER 175 AIRCRAFT CONFIGURATION (E170+ Skywest/Delta) ​

INTERIOR FINISHING. Buyer shall inform Embraer during the customer check list definition (“CCL”), to be held no later than [***] prior to the applicable Aircraft Contractual Delivery Date, of its choice of materials and colours of all and any item of interior finishing such as seat covers, carpet, floor lining on galley areas, side walls and overhead lining, galley lining and curtain, from the choices offered by and available at Embraer. In case Buyer opts to use different materials and/or patterns, Embraer will submit to Buyer a Proposal of Major Change (“PMC”) describing the impacts of such option, if any. Should Buyer not approve such PMC, the interior shall be built according to the choices offered by and available at Embraer. Once defined, for the applicable CCL the choices of interior finishing made by Buyer shall apply to all applicable Aircraft. If Buyer requires an interior finishing for any Aircraft that is different from the original one informed to Embraer, Buyer shall present a written request to Embraer not less than [***] prior to the relevant Aircraft Contractual Delivery Date and Embraer will submit the relevant quotation to the approval of Buyer within [***] from the date such request is received by Embraer. ​ ​ ATTACHMENT A22EMBRAER 175 AIRCRAFT CONFIGURATION (Skywest/Delta Air Lines) ​ Should Buyer not approve the quotation, the interior of relevant Aircraft shall be built according to the original choice of Buyer. ​ ​ ​ ​ ​.

INTERIOR FINISHING. Buyer shall inform Embraer during the customer check list definition (“CCL”), to be held no later than [***] prior to the applicable Aircraft Contractual Delivery Date, of its choice of materials and colours of all and any item of interior finishing such as seat covers, carpet, floor lining on galley areas, side walls and overhead lining, galley lining and curtain, from the choices offered by and available at Embraer. In case Buyer opts to use different materials and/or patterns, Embraer will submit to Buyer a Proposal of Major Change (“PMC”) describing the impacts of such option, if any. Should Buyer not approve such PMC, the interior shall be built according to the choices offered by and available at Embraer. Once defined, for the applicable CCL the choices of interior finishing made by Buyer shall apply to all applicable Aircraft. If Buyer requires an interior finishing for any Aircraft that is different from the original one informed to Embraer, Buyer shall present a written request to Embraer not less than [***] prior to the relevant Aircraft Contractual Delivery Date and Embraer will submit the relevant quotation to the approval of Buyer within [***] from the date such request is received by Embraer. Should Buyer not approve the quotation, the interior of relevant Aircraft shall be built according to the original choice of Buyer. ​ ​ ​ Attachment “A1” to Amendment No. 5 to Purchase Agreement COM0028-13 ​ Page 1 of 3 ​

INTERIOR FINISHING. Buyer shall inform Embraer during the customer check list definition (“CCL”), to be held no later than [***] ]prior to the applicable E170+ Aircraft Contractual Delivery Date, of its choice of materials and colours of all and any item of interior finishing such as seat covers, carpet, floor lining on galley areas, side walls and overhead lining, galley lining and curtain, from the choices offered by and available at Embraer. In case Buyer opts to use different materials and/or patterns, Embraer will submit to Buyer a Proposal of Major Change (“PMC”) describing the impacts of such option, if any. Should Buyer not approve such PMC, the interior shall be built according to the choices offered by and available at Embraer. Once defined, for the applicable CCL the choices of interior finishing made by Buyer shall apply to all applicable E170+ Aircraft. If Buyer requires an interior finishing for any Aircraft that is different from the original one informed to Embraer, Buyer shall present a written request to Embraer not less than [***] prior to the relevant E170+ Aircraft Contractual Delivery Date and Embraer will submit the relevant quotation to the approval of Buyer within [***] from the date such request is received by Embraer. Should Buyer not approve the quotation, the interior of relevant Aircraft shall be built according to the original choice of Buyer. ​ ​ ​ ​ ​ ​