Fill Materials Clause Samples

Fill Materials. Contractor shall supply and install all first fill lubricants, chemicals, packings, distilled/deionized water. First fill materials shall be stored in accordance with the manufacturer’s instructions. Contractor shall provide SCV water, diesel fuel, caustic soda and lubricating oils from date of first fill, including changes and replenishments, until Substantial Completion.

Fill Materials. TENANT shall not install cementitious fills or other materials which impose dead load on the building in excess of maximum permissible weight.

Fill Materials. A layer of reddish ▇▇▇▇▇ fill materials was found to extend from ground surface to a depth of 2.3 m at BH-06. The fill generally consists of a gravelly silty sand with occasional sandstone cobbles/boulders and traces of roots. N-values within the fill were found to range from 3 to 54 indicating a highly variable, very loose to dense, relative density. Grain size tests (curves appended) performed on split spoon samples of the fill show it to contain an average of 34 percent gravel, 44 percent sand and 22 percent fines (i.e., silt and clay sizes). The test samples were found to have a moisture content of 9 to 11 percent.

Fill Materials. 2.1.1 For general backfill if required: Use 100% crushed limestone Granular A as per OPSS 1010 2..

Fill Materials. The Developer shall have the right, subject to the approval of the City Engineer, to remove soil and limestone required, if necessary, to construct and to use such materials as fill within the Property.