Common use of EXPORT RESTRICTIONS Clause in Contracts

EXPORT RESTRICTIONS. You acknowledge that the SOFTWARE is of U.S. origin. You acknowledge that the license and distribution of the SOFTWARE is subject to the export control laws and regulations of the United States of America, and any amendments thereof, which restrict exports and re-exports of SOFTWARE, technical data, and direct products of technical data, including services and Developed Software. You agree that You will not export or re-export the SOFTWARE or any Developed Software, or any information, documentation and/or printed materials related thereto, directly or indirectly, without first obtaining permission to do so as required from the United States of America Department of Commerce’s Bureau of Industry and Security (“BIS”), or other appropriate governmental agencies, to any countries, end-users, or for any end-uses that are restricted by U.S. export laws and regulations, and any amendments thereof, which include, but are not limited to: Restricted Countries, Restricted End-Users, and Restricted End-Uses. These restrictions change from time to time. You represent and warrant that neither the BIS nor any other United States federal agency has suspended, revoked or denied Your export privileges. GC acknowledges that it shall use reasonable efforts to supply You with all reasonably necessary information regarding the SOFTWARE and its business to enable You to fully comply with the provisions of this Section. If You have any questions regarding Your obligations under United States of America export regulations, You should contact the Bureau of Industry and Security, United States Department of Commerce, Exporter Counseling Division, Washington DC. U.S.A. (202) 482- 4811,xxxx://xxx.xxx.xxx.xxx.

EXPORT RESTRICTIONS. You acknowledge that the SOFTWARE is of U.S. origin. You acknowledge that the license and distribution of the SOFTWARE is subject to the export control laws and regulations of the United States of America, and any amendments thereof, which restrict exports and re-exports of the SOFTWARE, technical data, and direct products of technical data, including services and Developed Software. You agree that You will not export or re-export the SOFTWARE or any Developed Software, or any information, documentation and/or printed materials related thereto, directly or indirectly, without first obtaining permission to do so as required from the United States of America Department of Commerce’s Bureau of Industry and Security (“BIS”), or other appropriate governmental agencies, to any countries, end-users, or for any end-uses that are restricted by U.S. export laws and regulations, and any amendments thereof, which include, but are not limited to: Restricted Countries, Restricted End-Users, and Restricted End-Uses. These restrictions change from time to time. You represent and warrant that neither the BIS nor any other United States federal agency has suspended, revoked revoked, or denied Your export privileges. GC acknowledges that it shall use reasonable efforts to supply You with all reasonably necessary information regarding the SOFTWARE and its business to enable You to fully comply with the provisions of this Section. If You have any questions regarding Your obligations under the United States of America export regulations, You should contact the Bureau of Industry and Security, United States Department of Commerce, Exporter Counseling Division, Washington DC. U.S.A. (202) 482- 4811,xxxx://xxx.xxx.xxx.xxx4811, xxxx://xxx.xxx.xxx.xxx. U.S. Government Restricted Rights. The SOFTWARE and the Documentation are provided with RESTRICTED RIGHTS. You will comply with any requirements of the Government to obtain such RESTRICTED RIGHTS protection, including without limitation, the placement of any restrictive legends on the SOFTWARE, and any license agreement used in connection with the distribution of the SOFTWARE. The manufacturer is GrapeCity, Inc., 000 Xxxxx Xxxxxxxxx Xxxxxx, Seventh Floor, Pittsburgh, PA 15206 USA. For solicitations issued by the Government, on or after December 1, 1995, and the Department of Defense, on or after September 29, 1995, the only rights provided in the SOFTWARE and the Documentation provided herein shall be those contained in this XXXX. Under no circumstances shall GC be obligated to comply with any Governmental requirements regarding the submission of or the request for exemption from submission of cost or pricing data or cost accounting requirements. For any distribution of the SOFTWARE that would require compliance by GC with the Government’s requirements relating to cost or pricing data or cost accounting requirements, You must obtain an appropriate waiver or exemption from such requirements for the benefit of GC from the appropriate Government authority before the distribution and/or license of the SOFTWARE to the Government.

EXPORT RESTRICTIONS. You acknowledge that the SOFTWARE is of U.S. origin. You acknowledge that the license and distribution of the SOFTWARE is subject to the export control laws and regulations of the United States of America, and any amendments thereof, which restrict exports and re-exports of the SOFTWARE, technical data, and direct products of technical data, including services and Developed Software. You agree that You will not export or re-export the SOFTWARE or any Developed Software, or any information, documentation and/or printed materials related thereto, directly or indirectly, without first obtaining permission to do so as required from the United States of America Department of Commerce’s Bureau of Industry and Security (“BIS”), or other appropriate governmental agencies, to any countries, end-users, or for any end-uses that are restricted by U.S. export laws and regulations, and any amendments thereof, which include, but are not limited to: Restricted Countries, Restricted End-Users, and Restricted End-Uses. These restrictions change from time to time. You represent and warrant that neither the BIS nor any other United States federal agency has suspended, revoked revoked, or denied Your export privileges. GC acknowledges that it shall use reasonable efforts to supply You with all reasonably necessary information regarding the SOFTWARE and its business to enable You to fully comply with the provisions of this Section. If You have any questions regarding Your obligations under the United States of America export regulations, You should contact the Bureau of Industry and Security, United States Department of Commerce, Exporter Counseling Division, Washington DC. U.S.A. (202) 482- 4811,xxxx://xxx.xxx.xxx.xxx4811, xxxx://xxx.xxx.xxx.xxx. U.S. Government Restricted Rights. The SOFTWARE and the Documentation are provided with RESTRICTED RIGHTS. You will comply with any requirements of the Government to obtain such RESTRICTED RIGHTS protection, including without limitation, the placement of any restrictive legends on the SOFTWARE, and any license agreement used in connection with the distribution of the SOFTWARE. The manufacturer is GrapeCity, Inc., 000 Xxxxx Xxxxxxxxx Xxxxxx, Seventh Floor, Pittsburgh, PA 15206 USA. For solicitations issued by the Government, on or after December 1, 1995, and the Department of Defense on or after September 29, 1995, the only rights provided in the SOFTWARE and the Documentation provided herein shall be those contained in this XXXX. Under no circumstances shall GC be obligated to comply with any Governmental requirements regarding the submission of or the request for exemption from submission of cost or pricing data or cost accounting requirements. For any distribution of the SOFTWARE that would require compliance by GC with the Government’s requirements relating to cost or pricing data or cost accounting requirements, You must obtain an appropriate waiver or exemption from such requirements for the benefit of GC from the appropriate Government authority before the distribution and/or license of the SOFTWARE to the Government.

EXPORT RESTRICTIONS. You acknowledge that the SOFTWARE is of U.S. origin. You acknowledge that the license and distribution of the SOFTWARE is subject to the export control laws and regulations of the United States of America, and any amendments thereof, which restrict exports and re-exports of the SOFTWARE, technical data, and direct products of technical data, including services and Developed Software. You agree that You will not export or re-export the SOFTWARE or any Developed Software, or any information, documentation and/or printed materials related thereto, directly or indirectly, without first obtaining permission to do so as required from the United States of America Department of Commerce’s Bureau of Industry and Security (“BIS”), or other appropriate governmental agencies, to any countries, end-users, or for any end-uses that are restricted by U.S. export laws and regulations, and any amendments thereof, which include, but are not limited to: Restricted Countries, Restricted End-Users, and Restricted End-Uses. These restrictions change from time to time. You represent and warrant that neither the BIS nor any other United States federal agency has suspended, revoked revoked, or denied Your export privileges. GC acknowledges that it shall use reasonable efforts to supply You with all reasonably necessary information regarding the SOFTWARE and its business to enable You to fully comply with the provisions of this Section. If You have any questions regarding Your obligations under the United States of America export regulations, You should contact the Bureau of Industry and Security, United States Department of Commerce, Exporter Counseling Division, Washington DC. U.S.A. (202) 482- 4811,xxxx://xxx.xxx.xxx.xxx4811, xxxx://xxx.xxx.xxx.xxx. U.S. Government Restricted Rights. The SOFTWARE and the Documentation are provided with RESTRICTED RIGHTS. You will comply with any requirements of the Government to obtain such RESTRICTED RIGHTS protection, including without limitation, the placement of any restrictive legends on the SOFTWARE, and any license agreement used in connection with the distribution of the SOFTWARE. The manufacturer is GrapeCity, Inc., 000 Xxxxx Xxxxxxxxx Xxxxxx, Seventh Floor, Pittsburgh, PA 15206 USA. For solicitations issued by the Government, on or after December 1, 1995, and the Department of Defense, on or after September 29, 1995, the only rights provided in the SOFTWARE and documentation provided herein shall be those contained in this XXXX. Under no circumstances shall GC be obligated to comply with any Governmental requirements regarding the submission of or the request for exemption from submission of cost or pricing data or cost accounting requirements. For any distribution of the SOFTWARE that would require compliance by GC with the Government’s requirements relating to cost or pricing data or cost accounting requirements, You must obtain an appropriate waiver or exemption from such requirements for the benefit of GC from the appropriate Government authority before the distribution and/or license of the SOFTWARE to the Government.

EXPORT RESTRICTIONS. You acknowledge that the SOFTWARE is of U.S. origin. You acknowledge that the license and distribution of the SOFTWARE is subject to the export control laws and regulations of the United States of America, and any amendments thereof, which restrict exports and re-exports of SOFTWARE, technical data, and direct products of technical data, including services and Developed Software. You agree that You will not export or re-export the SOFTWARE or any Developed Software, or any information, documentation and/or printed materials related thereto, directly or indirectly, without first obtaining permission to do so as required from the United States of America Department of Commerce’s Bureau of Industry and Security (“BIS”), or other appropriate governmental agencies, to any countries, end-users, or for any end-uses that are restricted by U.S. export laws and regulations, and any amendments thereof, which include, but are not limited to: Restricted Countries, Restricted End-Users, and Restricted End-Uses. These restrictions change from time to time. You represent and warrant that neither the BIS nor any other United States federal agency has suspended, revoked or denied Your export privileges. GC MESCIUS acknowledges that it shall use reasonable efforts to supply You with all reasonably necessary information regarding the SOFTWARE and its business to enable You to fully comply with the provisions of this Section. If You have any questions regarding Your obligations under United States of America export regulations, You should contact the Bureau of Industry and Security, United States Department of Commerce, Exporter Counseling Division, Washington DC. U.S.A. (202) 482- 4811,xxxx://xxx.xxx.xxx.xxx.

EXPORT RESTRICTIONS. You acknowledge that the SOFTWARE is of U.S. origin. You acknowledge that the license and distribution of the SOFTWARE is subject to the export control laws and regulations of the United States of America, and any amendments thereof, which restrict exports and re-exports of the SOFTWARE, technical data, and direct products of technical data, including services and Developed Software. You agree that You will not export or re-export the SOFTWARE or any Developed Software, or any information, documentation and/or printed materials related thereto, directly or indirectly, without first obtaining permission to do so as required from the United States of America Department of Commerce’s Bureau of Industry and Security (“BIS”), or other appropriate governmental agencies, to any countries, end-users, or for any end-uses that are restricted by U.S. export laws and regulations, and any amendments thereof, which include, but are not limited to: Restricted Countries, Restricted End-Users, and Restricted End-Uses. These restrictions change from time to time. You represent and warrant that neither the BIS nor any other United States federal agency has suspended, revoked revoked, or denied Your export privileges. GC acknowledges that it shall use reasonable efforts to supply You with all reasonably necessary information regarding the SOFTWARE and its business to enable You to fully comply with the provisions of this Section. If You have any questions regarding Your obligations under the United States of America export regulations, You should contact the Bureau of Industry and Security, United States Department of Commerce, Exporter Counseling Division, Washington DC. U.S.A. (202) 482- 4811,xxxx://xxx.xxx.xxx.xxx4811, xxxx://xxx.xxx.xxx.xxx. U.s. government restricted rights. The SOFTWARE and the Documentation are provided with RESTRICTED RIGHTS. You will comply with any requirements of the Government to obtain such RESTRICTED RIGHTS protection, including without limitation, the placement of any restrictive legends on the SOFTWARE, and any license agreement used in connection with the distribution of the SOFTWARE. The manufacturer is GrapeCity, Inc., 000 Xxxxx Xxxxxxxxx Xxxxxx, Seventh Floor, Pittsburgh, PA 15206 USA. For solicitations issued by the Government, on or after December 1, 1995, and the Department of Defense, on or after September 29, 1995, the only rights provided in the SOFTWARE and the Documentation provided herein shall be those contained in this XXXX. Under no circumstances shall GC be obligated to comply with any Governmental requirements regarding the submission of or the request for exemption from submission of cost or pricing data or cost accounting requirements. For any distribution of the SOFTWARE that would require compliance by GC with the Government’s requirements relating to cost or pricing data or cost accounting requirements, You must obtain an appropriate waiver or exemption from such requirements for the benefit of GC from the appropriate Government authority before the distribution and/or license of the SOFTWARE to the Government.

EXPORT RESTRICTIONS. You acknowledge that the SOFTWARE is of U.S. origin. You acknowledge that the license and distribution of the SOFTWARE is subject to the export control laws and regulations of the United States of America, and any amendments thereof, which restrict exports and re-exports of the SOFTWARE, technical data, and direct products of technical data, including services and Developed Software. You agree that You will not export or re-export the SOFTWARE or any Developed Software, or any information, documentation and/or printed materials related thereto, directly or indirectly, without first obtaining permission to do so as required from the United States of America Department of Commerce’s Bureau of Industry and Security (“BIS”), or other appropriate governmental agencies, to any countries, end-users, or for any end-uses that are restricted by U.S. export laws and regulations, and any amendments thereof, which include, but are not limited to: Restricted Countries, Restricted End-Users, and Restricted End-Uses. These restrictions change from time to time. You represent and warrant that neither the BIS nor any other United States federal agency has suspended, revoked revoked, or denied Your export privileges. GC acknowledges that it shall use reasonable efforts to supply You with all reasonably necessary information regarding the SOFTWARE and its business to enable You to fully comply with the provisions of this Section. If You have any questions regarding Your obligations under the United States of America export regulations, You should contact the Bureau of Industry and Security, United States Department of Commerce, Exporter Counseling Division, Washington DC. U.S.A. (202) 482- 4811,xxxx://xxx.xxx.xxx.xxx4811, xxxx://xxx.xxx.xxx.xxx. U.S. Government Restricted Rights. The SOFTWARE and the Documentation are provided with RESTRICTED RIGHTS. You will comply with any requirements of the Government to obtain such RESTRICTED RIGHTS protection, including without limitation, the placement of any restrictive legends on the SOFTWARE, and any license agreement used in connection with the distribution of the SOFTWARE. The manufacturer is GrapeCity, Inc., 000 Xxxxx Xxxxxxxxx Xxxxxx, Seventh Floor, Pittsburgh, PA 15206 USA. For solicitations issued by the Government, on or after December 1, 1995 and the Department of Defense, on or after September 29, 1995, the only rights provided in the SOFTWARE and the Documentation provided herein shall be those contained in this XXXX. Under no circumstances shall GC be obligated to comply with any Governmental requirements regarding the submission of or the request for exemption from submission of cost or pricing data or cost accounting requirements. For any distribution of the SOFTWARE that would require compliance by GC with the Government’s requirements relating to cost or pricing data or cost accounting requirements, You must obtain an appropriate waiver or exemption from such requirements for the benefit of GC from the appropriate Government authority before the distribution and/or license of the SOFTWARE to the Government.

EXPORT RESTRICTIONS. You acknowledge that the SOFTWARE is of U.S. origin. You acknowledge that the license and distribution of the SOFTWARE is subject to the export control laws and regulations of the United States of America, and any amendments thereof, which restrict exports and re-exports of SOFTWARE, technical data, and direct products of technical data, including services and Developed Software. You agree that You will not export or re-export the SOFTWARE or any Developed Software, or any information, documentation and/or printed materials related thereto, directly or indirectly, without first obtaining permission to do so as required from the United States of America Department of Commerce’s Bureau of Industry and Security (“BIS”), or other appropriate governmental agencies, to any countries, end-users, or for any end-uses that are restricted by U.S. export laws and regulations, and any amendments thereof, which include, but are not limited to: Restricted Countries, Restricted End-Users, and Restricted End-Uses. These restrictions change from time to time. You represent and warrant that neither the BIS nor any other United States federal agency has suspended, revoked or denied Your export privileges. GC XXXXXXX acknowledges that it shall use reasonable efforts to supply You with all reasonably necessary information regarding the SOFTWARE and its business to enable You to fully comply with the provisions of this Section. If You have any questions regarding Your obligations under United States of America export regulations, You should contact the Bureau of Industry and Security, United States Department of Commerce, Exporter Counseling Division, Washington DC. U.S.A. (202) 482- 4811,xxxx://xxx.xxx.xxx.xxx.

EXPORT RESTRICTIONS. You acknowledge that the SOFTWARE is of U.S. origin. You acknowledge that the license and distribution of the SOFTWARE is subject to the export control laws and regulations of the United States of America, and any amendments thereof, which restrict exports and re-exports of the SOFTWARE, technical data, and direct products of technical data, including services and Developed Software. You agree that You will not export or re-export the SOFTWARE or any Developed Software, or any information, documentation and/or printed materials related thereto, directly or indirectly, without first obtaining permission to do so as required from the United States of America Department of Commerce’s Bureau of Industry and Security (“BIS”), or other appropriate governmental agencies, to any countries, end-users, or for any end-uses that are restricted by U.S. export laws and regulations, and any amendments thereof, which include, but are not limited to: Restricted Countries, Restricted End-Users, and Restricted End-Uses. These restrictions change from time to time. You represent and warrant that neither the BIS nor any other United States federal agency has suspended, revoked revoked, or denied Your export privileges. GC acknowledges that it shall use reasonable efforts to supply You with all reasonably necessary information regarding the SOFTWARE and its business to enable You to fully comply with the provisions of this Section. If You have any questions regarding Your obligations under the United States of America export regulations, You should contact the Bureau of Industry and Security, United States Department of Commerce, Exporter Counseling Division, Washington DC. U.S.A. (202) 482- 4811,xxxx://xxx.xxx.xxx.xxx4811, xxxx://xxx.xxx.xxx.xxx. U.s. government restricted rights. The SOFTWARE and documentation are provided with RESTRICTED RIGHTS. You will comply with any requirements of the Government to obtain such RESTRICTED RIGHTS protection, including without limitation, the placement of any restrictive legends on the SOFTWARE, and any license agreement used in connection with the distribution of the SOFTWARE. The manufacturer is GrapeCity, Inc., 000 Xxxxx Xxxxxxxxx Xxxxxx, Seventh Floor, Pittsburgh, PA 15206 USA. For solicitations issued by the Government, on or after December 1, 1995, and the Department of Defense, on or after September 29, 1995, the only rights provided in the SOFTWARE and documentation provided herein shall be those contained in this XXXX. Under no circumstances shall GC be obligated to comply with any Governmental requirements regarding the submission of or the request for exemption from submission of cost or pricing data or cost accounting requirements. For any distribution of the SOFTWARE that would require compliance by GC with the Government’s requirements relating to cost or pricing data or cost accounting requirements, You must obtain an appropriate waiver or exemption from such requirements for the benefit of GC from the appropriate Government authority before the distribution and/or license of the SOFTWARE to the Government.

EXPORT RESTRICTIONS. You acknowledge that the SOFTWARE is of U.S. origin. You acknowledge that the license and distribution of the SOFTWARE is subject to the export control laws and regulations of the United States of America, and any amendments thereof, which restrict exports and re-exports of the SOFTWARE, technical data, and direct products of technical data, including services and Developed Software. You agree that You will not export or re-export the SOFTWARE or any Developed Software, or any information, documentation and/or printed materials related thereto, directly or indirectly, without first obtaining permission to do so as required from the United States of America Department of Commerce’s Bureau of Industry and Security (“BIS”), or other appropriate governmental agencies, to any countries, end-users, or for any end-uses that are restricted by U.S. export laws and regulations, and any amendments thereof, which include, but are not limited to: Restricted Countries, Restricted End-Users, and Restricted End-Uses. These restrictions change from time to time. You represent and warrant that neither the BIS nor any other United States federal agency has suspended, revoked revoked, or denied Your export privileges. GC acknowledges that it shall use reasonable efforts to supply You with all reasonably necessary information regarding the SOFTWARE and its business to enable You to fully comply with the provisions of this Section. If You have any questions regarding Your obligations under the United States of America export regulations, You should contact the Bureau of Industry and Security, United States Department of Commerce, Exporter Counseling Division, Washington DC. U.S.A. (202) 482- 4811,xxxx://xxx.xxx.xxx.xxx4811, xxxx://xxx.xxx.xxx.xxx. U.s. government restricted rights. The SOFTWARE and the Documentation are provided with RESTRICTED RIGHTS. You will comply with any requirements of the Government to obtain such RESTRICTED RIGHTS protection, including without limitation, the placement of any restrictive legends on the SOFTWARE, and any license agreement used in connection with the distribution of the SOFTWARE. The manufacturer is GrapeCity, Inc., 000 Xxxxx Xxxxxxxxx Xxxxxx, Seventh Floor, Pittsburgh, PA 15206 USA. For solicitations issued by the Government, on or after December 1, 1995, and the Department of Defense on or after September 29, 1995, the only rights provided in the SOFTWARE and the Documentation provided herein shall be those contained in this XXXX. Under no circumstances shall GC be obligated to comply with any Governmental requirements regarding the submission of or the request for exemption from submission of cost or pricing data or cost accounting requirements. For any distribution of the SOFTWARE that would require compliance by GC with the Government’s requirements relating to cost or pricing data or cost accounting requirements, You must obtain an appropriate waiver or exemption from such requirements for the benefit of GC from the appropriate Government authority before the distribution and/or license of the SOFTWARE to the Government.

EXPORT RESTRICTIONS. You acknowledge that the SOFTWARE is of U.S. origin. You acknowledge that the license and distribution of the SOFTWARE is subject to the export control laws and regulations of the United States of America, and any amendments thereof, which restrict exports and re-exports of the SOFTWARE, technical data, and direct products of technical data, including services and Developed Software. You agree that You will not export or re-export the SOFTWARE or any Developed Software, or any information, documentation and/or printed materials related thereto, directly or indirectly, without first obtaining permission to do so as required from the United States of America Department of Commerce’s Bureau of Industry and Security (“BIS”), or other appropriate governmental agencies, to any countries, end-users, or for any end-uses that are restricted by U.S. export laws and regulations, and any amendments thereof, which include, but are not limited to: Restricted Countries, Restricted End-Users, and Restricted End-Uses. These restrictions change from time to time. You represent and warrant that neither the BIS nor any other United States federal agency has suspended, revoked revoked, or denied Your export privileges. GC acknowledges that it shall use reasonable efforts to supply You with all reasonably necessary information regarding the SOFTWARE and its business to enable You to fully comply with the provisions of this Section. If You have any questions regarding Your obligations under the United States of America export regulations, You should contact the Bureau of Industry and Security, United States Department of Commerce, Exporter Counseling Division, Washington DC. U.S.A. (202) 482- 4811,xxxx://xxx.xxx.xxx.xxx4811, xxxx://xxx.xxx.xxx.xxx. U.s. government restricted rights. The SOFTWARE and the Documentation are provided with RESTRICTED RIGHTS. You will comply with any requirements of the Government to obtain such RESTRICTED RIGHTS protection, including without limitation, the placement of any restrictive legends on the SOFTWARE, and any license agreement used in connection with the distribution of the SOFTWARE. The manufacturer is GrapeCity, Inc., 000 Xxxxx Xxxxxxxxx Xxxxxx, Seventh Floor, Pittsburgh, PA 15206 USA. For solicitations issued by the Government, on or after December 1, 1995 and the Department of Defense, on or after September 29, 1995, the only rights provided in the SOFTWARE and the Documentation provided herein shall be those contained in this XXXX. Under no circumstances shall GC be obligated to comply with any Governmental requirements regarding the submission of or the request for exemption from submission of cost or pricing data or cost accounting requirements. For any distribution of the SOFTWARE that would require compliance by GC with the Government’s requirements relating to cost or pricing data or cost accounting requirements, You must obtain an appropriate waiver or exemption from such requirements for the benefit of GC from the appropriate Government authority before the distribution and/or license of the SOFTWARE to the Government.

EXPORT RESTRICTIONS. You acknowledge that the SOFTWARE is of U.S. origin. You acknowledge that the license and distribution of the SOFTWARE is subject to the export control laws and regulations of the United States of America, and any amendments thereof, which restrict exports and re-exports of the SOFTWARE, technical data, and direct products of technical data, including services and Developed Software. You agree that You will not export or re-export the SOFTWARE or any Developed Software, or any information, documentation and/or printed materials related thereto, directly or indirectly, without first obtaining permission to do so as required from the United States of America Department of Commerce’s Bureau of Industry and Security (“BIS”), or other appropriate governmental agencies, to any countries, end-users, or for any end-uses that are restricted by U.S. export laws and regulations, and any amendments thereof, which include, but are not limited to: Restricted Countries, Restricted End-Users, and Restricted End-Uses. These restrictions change from time to time. You represent and warrant that neither the BIS nor any other United States federal agency has suspended, revoked revoked, or denied Your export privileges. GC acknowledges that it shall use reasonable efforts to supply You with all reasonably necessary information regarding the SOFTWARE and its business to enable You to fully comply with the provisions of this Section. If You have any questions regarding Your obligations under the United States of America export regulations, You should contact the Bureau of Industry and Security, United States Department of Commerce, Exporter Counseling Division, Washington DC. U.S.A. (202) 482- 4811,xxxx://xxx.xxx.xxx.xxx4811, xxxx://xxx.xxx.xxx.xxx. U.s. government restricted rights. The SOFTWARE and the Documentation are provided with RESTRICTED RIGHTS. You will comply with any requirements of the Government to obtain such RESTRICTED RIGHTS protection, including without limitation, the placement of any restrictive legends on the SOFTWARE, and any license agreement used in connection with the distribution of the SOFTWARE. The Manufacturer is GrapeCity, Inc., 000 Xxxxx Xxxxxxxxx Xxxxxx, Seventh Floor, Pittsburgh, PA 15206 USA. For solicitations issued by the Government, on or after December 1, 1995, and the Department of Defense, on or after September 29, 1995, the only rights provided in the SOFTWARE and the Documentation provided herein shall be those contained in this XXXX. Under no circumstances shall GC be obligated to comply with any Governmental requirements regarding the submission of or the request for exemption from submission of cost or pricing data or cost accounting requirements. For any distribution of the SOFTWARE that would require compliance by GC with the Government’s requirements relating to cost or pricing data or cost accounting requirements, You must obtain an appropriate waiver or exemption from such requirements for the benefit of GC from the appropriate Government authority before the distribution and/or license of the SOFTWARE to the Government.

EXPORT RESTRICTIONS. You acknowledge that the SOFTWARE is of U.S. origin. You acknowledge that the license and distribution of the SOFTWARE is subject to the export control laws and regulations of the United States of America, and any amendments thereof, which restrict exports and re-exports of the SOFTWARE, technical data, and direct products of technical data, including services and Developed Software. You agree that You will not export or re-export the SOFTWARE or any Developed Software, or any information, documentation and/or printed materials related thereto, directly or indirectly, without first obtaining permission to do so as required from the United States of America Department of Commerce’s Bureau of Industry and Security (“BIS”), or other appropriate governmental agencies, to any countries, end-users, or for any end-uses that are restricted by U.S. export laws and regulations, and any amendments thereof, which include, but are not limited to: Restricted Countries, Restricted End-Users, and Restricted End-Uses. These restrictions change from time to time. You represent and warrant that neither the BIS nor any other United States federal agency has suspended, revoked revoked, or denied Your export privileges. GC acknowledges that it shall use reasonable efforts to supply You with all reasonably necessary information regarding the SOFTWARE and its business to enable You to fully comply with the provisions of this Section. If You have any questions regarding Your obligations under the United States of America export regulations, You should contact the Bureau of Industry and Security, United States Department of Commerce, Exporter Counseling Division, Washington DC. U.S.A. (202) 482- 4811,xxxx://xxx.xxx.xxx.xxx4811, xxxx://xxx.xxx.xxx.xxx.

EXPORT RESTRICTIONS. You acknowledge that the SOFTWARE is of U.S. origin. You acknowledge that the license and distribution of the SOFTWARE is subject to the export control laws and regulations of the United States of America, and any amendments thereof, which restrict exports and re-exports of SOFTWARE, technical data, and direct products of technical data, including services and Developed Software. You agree that You will not export or re-export the SOFTWARE or any Developed Software, or any information, documentation and/or printed materials related thereto, directly or indirectly, without first obtaining permission to do so as required from the United States of America Department of Commerce’s Bureau of Industry and Security (“BIS”), or other appropriate governmental agencies, to any countries, end-users, or for any end-uses that are restricted by U.S. export laws and regulations, and any amendments thereof, which include, but are not limited to: Restricted Countries, Restricted End-Users, and Restricted End-Uses. These restrictions change from time to time. You represent and warrant that neither the BIS nor any other United States federal agency has suspended, revoked or denied Your export privileges. GC acknowledges that it shall use reasonable efforts to supply You with all reasonably necessary information regarding the SOFTWARE and its business to enable You to fully comply with the provisions of this Section. If You have any questions regarding Your obligations under United States of America export regulations, You should contact the Bureau of Industry and Security, United States Department of Commerce, Exporter Counseling Division, Washington DC. U.S.A. (202000) 482- 4811,xxxx://xxx.xxx.xxx.xxx000-0000,xxxx://xxx.xxx.xxx.xxx.

EXPORT RESTRICTIONS. You acknowledge that the SOFTWARE is of U.S. origin. You acknowledge that the license and distribution of the SOFTWARE is subject to the export control laws and regulations of the United States of America, and any amendments thereof, which restrict exports and re-exports of the SOFTWARE, technical data, and direct products of technical data, including services and Developed Software. You agree that You will not export or re-export the SOFTWARE or any Developed Software, or any information, documentation and/or printed materials related thereto, directly or indirectly, without first obtaining permission to do so as required from the United States of America Department of Commerce’s Bureau of Industry and Security (“BIS”), or other appropriate governmental agencies, to any countries, end-users, or for any end-uses that are restricted by U.S. export laws and regulations, and any amendments thereof, which include, but are not limited to: Restricted Countries, Restricted End-Users, and Restricted End-Uses. These restrictions change from time to time. You represent and warrant that neither the BIS nor any other United States federal agency has suspended, revoked revoked, or denied Your export privileges. GC acknowledges that it shall use reasonable efforts to supply You with all reasonably necessary information regarding the SOFTWARE and its business to enable You to fully comply with the provisions of this Section. If You have any questions regarding Your obligations under the United States of America export regulations, You should contact the Bureau of Industry and Security, United States Department of Commerce, Exporter Counseling Division, Washington DC. U.S.A. (202) 482- 4811,xxxx://xxx.xxx.xxx.xxx4811, xxxx://xxx.xxx.xxx.xxx. U.S. Government Restricted Rights. The SOFTWARE and the Documentation are provided with RESTRICTED RIGHTS. You will comply with any requirements of the Government to obtain such RESTRICTED RIGHTS protection, including without limitation, the placement of any restrictive legends on the SOFTWARE, and any license agreement used in connection with the distribution of the SOFTWARE. The Manufacturer is GrapeCity, Inc., 000 Xxxxx Xxxxxxxxx Xxxxxx, Seventh Floor, Pittsburgh, PA 15206 USA. For solicitations issued by the Government, on or after December 1, 1995, and the Department of Defense, on or after September 29, 1995, the only rights provided in the SOFTWARE and the Documentation provided herein shall be those contained in this XXXX. Under no circumstances shall GC be obligated to comply with any Governmental requirements regarding the submission of or the request for exemption from submission of cost or pricing data or cost accounting requirements. For any distribution of the SOFTWARE that would require compliance by GC with the Government’s requirements relating to cost or pricing data or cost accounting requirements, You must obtain an appropriate waiver or exemption from such requirements for the benefit of GC from the appropriate Government authority before the distribution and/or license of the SOFTWARE to the Government.

EXPORT RESTRICTIONS. You acknowledge that the SOFTWARE is of U.S. origin. You acknowledge that the license and distribution of the SOFTWARE is subject to the export control laws and regulations of the United States of America, and any amendments thereof, which restrict exports and re-exports of the SOFTWARE, technical data, and direct products of technical data, including services and Developed Software. You agree that You will not export or re-export the SOFTWARE or any Developed Software, or any information, documentation and/or printed materials related thereto, directly or indirectly, without first obtaining permission to do so as required from the United States of America Department of Commerce’s Bureau of Industry and Security (“BIS”), or other appropriate governmental agencies, to any countries, end-users, or for any end-uses that are restricted by U.S. export laws and regulations, and any amendments thereof, which include, but are not limited to: Restricted Countries, Restricted End-Users, and Restricted End-Uses. These restrictions change from time to time. You represent and warrant that neither the BIS nor any other United States federal agency has suspended, revoked revoked, or denied Your export privileges. GC acknowledges that it shall use reasonable efforts to supply You with all reasonably necessary information regarding the SOFTWARE and its business to enable You to fully comply with the provisions of this Section. If You have any questions regarding Your obligations under the United States of America export regulations, You should contact the Bureau of Industry and Security, United States Department of Commerce, Exporter Counseling Division, Washington DC. U.S.A. (202) 482- 4811,xxxx://xxx.xxx.xxx.xxx4811, xxxx://xxx.xxx.xxx.xxx. U.s. government restricted rights. The SOFTWARE and the Documentation are provided with RESTRICTED RIGHTS. You will comply with any requirements of the Government to obtain such RESTRICTED RIGHTS protection, including without limitation, the placement of any restrictive legends on the SOFTWARE, and any license agreement used in connection with the distribution of the SOFTWARE. The manufacturer is GrapeCity, Inc., 000 Xxxxx Xxxxxxxxx Xxxxxx, Seventh Floor, Pittsburgh, PA 15206 USA. For solicitations issued by the Government, on or after December 1, 1995, and the Department of Defense, on or after September 29, 1995, the only rights provided in the SOFTWARE and documentation provided herein shall be those contained in this XXXX. Under no circumstances shall GC be obligated to comply with any Governmental requirements regarding the submission of or the request for exemption from submission of cost or pricing data or cost accounting requirements. For any distribution of the SOFTWARE that would require compliance by GC with the Government’s requirements relating to cost or pricing data or cost accounting requirements, You must obtain an appropriate waiver or exemption from such requirements for the benefit of GC from the appropriate Government authority before the distribution and/or license of the SOFTWARE to the Government.