Common use of Equipment Type Clause in Contracts

Equipment Type. BellSouth permits the collocation of any type of equipment necessary for interconnection to BellSouth’s network or for access to unbundled network elements in the provision of telecommunications services. 5.1.1 Such equipment must at a minimum meet the following BellCore (Telcordia) Network Equipment Building Systems (NEBS) General Equipment Requirements: Criteria Level 3 requirements as outlined in the BellCore (Telcordia) Special Report SR-3580, Issue 1; equipment design spatial requirements per GR-63-CORE, Section 2; thermal heat dissipation per GR-063-CORE, Section 4, Criteria 77-79; acoustic noise per GR- 063-CORE, Section 4, Criterion 128, and National Electric Code standards. Except where otherwise required by a Commission, BellSouth shall comply with the applicable FCC rules relating to denial of collocation based on WebShoppe’s failure to comply with these requirements. 5.1.2 WebShoppe shall not use the Remote Collocation Space for marketing purposes nor shall it place any identifying signs or markings in the area surrounding the Remote Collocation Space or on the grounds of the Remote Site Location. 5.1.3 WebShoppe shall place a plaque or other identification affixed to WebShoppe’s equipment to identify WebShoppe’s equipment, including a list of emergency contacts with telephone numbers. 5.1.4 All WebShoppe equipment installation shall comply with ▇▇▇▇▇▇▇▇▇ ▇▇ ▇▇▇▇▇-▇▇, Section 8, “Grounding - Engineering Procedures”. Metallic cable sheaths and metallic strength members of optical fiber cables as well as the metallic cable sheaths of all copper conductor cables shall be bonded to the designated grounding bus for the Remote Site Location. All copper conductor pairs, working and non-working, shall be equipped with a solid state protector unit (over-voltage protection only) which has been listed by a nationally recognized testing laboratory.

Equipment Type. BellSouth permits the collocation of any type of equipment necessary for interconnection to BellSouth’s network or for access to unbundled network elements in the provision of telecommunications services. 5.1.1 Such equipment must at a minimum meet the following BellCore (Telcordia) Network Equipment Building Systems (NEBS) General Equipment Requirements: Criteria Level 3 requirements as outlined in the BellCore (Telcordia) Special Report SR-3580, Issue 1; equipment design spatial requirements per GR-63-CORE, Section 2; thermal heat dissipation per GR-063GR- 063-CORE, Section 4, Criteria 77-79; acoustic noise per GR- 063GR-063-CORE, Section 4, Criterion 128, and National Electric Code standards. Except where otherwise required by a Commission, BellSouth shall comply with the applicable FCC rules relating to denial of collocation based on WebShoppeCLEC-1’s failure to comply with these requirements. 5.1.2 WebShoppe CLEC-1 shall not use the Remote Collocation Space for marketing purposes nor shall it place any identifying signs or markings in the area surrounding the Remote Collocation Space or on the grounds of the Remote Site Location. 5.1.3 WebShoppe CLEC-1 shall place a plaque or other identification affixed to WebShoppeCLEC-1’s equipment to identify WebShoppeCLEC-1’s equipment, including a list of emergency contacts with telephone numbers. 5.1.4 All WebShoppe CLEC-1 equipment installation shall comply with ▇▇▇▇▇▇▇▇▇ ▇▇ ▇▇▇▇▇BellSouth TR 73503-▇▇11, Section 8, “Grounding - Engineering Procedures”. Metallic cable sheaths and metallic strength members of optical fiber cables as well as the metallic cable sheaths of all copper conductor cables shall be bonded to the designated grounding bus for the Remote Site Location. All copper conductor pairs, working and non-working, shall be equipped with a solid state protector unit (over-voltage protection only) which has been listed by a nationally recognized testing laboratory.