Common use of Direct Connection Clause in Contracts

Direct Connection. 8.3.1.11.2.1 Direct Connection provides an uninterrupted path from the Collocation space to an existing frame. This option will guarantee that there will not be an ICDF. The connection will be designed from the Collocation space to the same frame that Qwest uses to connect to that specific service. For example, if CLEC wants to connect directly from their Collocation space to a 911 router, the infrastructure for the 911 trunks will terminate in a DS1 bay location with the 911-router circuits. There are several options for the location of the Demarcation Point. CLEC will select their desired option via the supplemental Direct Connection (DC-POT) With Collocation Form DC050900. If CLEC chooses a demarcation inside the Collocation space, the collocator should order and install the termination equipment itself. Demarcation equipment must be noted on the order form so that a CLLI code and unique tie cable assignments can be generated for systems flow through. If CLEC chooses a demarcation outside its Collocation space, Qwest will maintain and inventory this device. Direct terminations may be ordered where frame space is available. If frame space is exhausted the terminations may need to be made at another frame. Upon completion of the pre-Provisioning of the Direct Connection, CLEC will receive an Alternate Point of Termination (APOT) form so that they may order Finished Services and UNEs. CLEC will be responsible for augmenting terminations as required. The Direct Connection APOT information must be provided on the ASR or LSR to insure that the services are designed to the dedicated path.

Direct Connection. 8.3.1.11.2.1 Direct Connection provides an uninterrupted path from the Collocation space to an existing frame. This option will guarantee that there will not be an ICDF. The connection will be designed from the Collocation space to the same frame that Qwest uses to connect to that specific service. For example, if CLEC wants to connect directly from their Collocation space to a 911 router, the infrastructure for the 911 trunks will terminate in a DS1 bay location with the 911-router circuits. There are several options for the location of the Demarcation Pointdemarcation point. CLEC will select their desired option via the supplemental Direct Connection (DC-POT) With Collocation Form DC050900. If CLEC chooses a demarcation inside the Collocation space, the collocator should order and install the termination equipment itself. Demarcation equipment must be noted on the order form so that a CLLI code and unique tie cable assignments can be generated for systems flow through. If CLEC chooses a demarcation outside its Collocation space, Qwest will maintain and inventory this device. Direct terminations may be ordered where frame space is available. If frame space is exhausted the terminations may need to be made at another frame. Upon completion of the pre-Provisioning provisioning of the Direct Connection, CLEC will receive an Alternate Point of Of Termination (APOT) form so that they may order Finished Services finished services and UNEs. CLEC will be responsible for augmenting terminations as required. The Direct Connection APOT information must be provided on the ASR or LSR to insure that the services are designed to the dedicated path.

Direct Connection. 8.3.1.11.2.1 Direct Connection provides an uninterrupted path from the Collocation space to an existing frame. This option will guarantee that there will not be an ICDF. The connection will be designed from the Collocation space to the same frame that Qwest uses to connect to that specific service. For example, if CLEC wants to connect directly from their Collocation space to a 911 router, the infrastructure for the 911 trunks will terminate in a DS1 bay location with the 911-router circuits. There are several options for the location of the Demarcation Pointdemarcation point. CLEC will select their desired option via the supplemental Direct Connection (DC-POT) With Collocation Form DC050900. If CLEC chooses a demarcation inside the Collocation space, the collocator should order and install the termination equipment itself. Demarcation equipment must be noted on the order form so that a CLLI code and unique tie cable assignments can be generated for systems flow through. If CLEC chooses a demarcation outside its Collocation space, Qwest will maintain and inventory this device. Direct terminations may be ordered where frame space is available. If frame space is exhausted the terminations may need to be made at another frame. Upon completion of the pre-Provisioning provisioning of the Direct Connection, CLEC will receive an Alternate Point of Termination (APOT) form so that they may order Finished Services and UNEs. CLEC will be responsible for augmenting terminations as required. The Direct Connection APOT information must be provided on the ASR or LSR to insure that the services are designed to the dedicated path.

Direct Connection. 8.3.1.11.2.1 Direct Connection provides an uninterrupted path from the Collocation space to an existing frame. This option will guarantee that there will not be an ICDF. The connection will be designed from the Collocation space to the same frame that Qwest uses to connect to that specific service. For example, if CLEC wants to connect directly from their Collocation space to a 911 router, the infrastructure for the 911 trunks will terminate in a DS1 bay location with the 911-router circuits. There are several options for the location of the Demarcation Pointdemarcation point. CLEC will select their desired option via the supplemental Direct Connection (DC-POT) With Collocation Form DC050900. If CLEC chooses a demarcation inside the Collocation space, the collocator should order and install the termination equipment itself. Demarcation equipment must be noted on the order form so that a CLLI code and unique tie cable assignments can be generated for systems flow through. If CLEC chooses a demarcation outside its Collocation space, Qwest will maintain and inventory this device. Direct terminations may be ordered where frame space is available. If frame space is exhausted Qwest Version 3.6 Template Agreement, 03-16-2001 85 4/27/01/HAH for BB/NOS Comm Inc/NE/CDS-010426-0042 the terminations may need to be made at another frame. Upon completion of the pre-Provisioning provisioning of the Direct Connection, CLEC will receive an Alternate Point of Of Termination (APOT) form so that they may order Finished Services finished services and UNEs. CLEC will be responsible for augmenting terminations as required. The Direct Connection APOT information must be provided on the ASR or LSR to insure that the services are designed to the dedicated path.

Direct Connection. 8.3.1.11.2.1 Direct Connection provides an uninterrupted path from the Collocation space to an existing frame. This option will guarantee that there will not be an ICDF. The connection will be designed from the Collocation space to the same frame that Qwest uses to connect to that specific service. For example, if CLEC SBCT wants to connect directly from their Collocation space to a 911 router, the infrastructure for the 911 trunks will terminate in a DS1 bay location with the 911-router circuits. There are several options for the location of the Demarcation Pointdemarcation point. CLEC SBCT will select their desired option via the supplemental Direct Connection (DC-POT) With Collocation Form DC050900. If CLEC SBCT chooses a demarcation inside the Collocation space, the collocator should order and install the termination equipment itself. Demarcation equipment must be noted on the order form so that a CLLI code and unique tie cable assignments can be generated for systems flow through. If CLEC SBCT chooses a demarcation outside its Collocation space, Qwest will maintain and inventory this device. Direct terminations may be ordered where frame space is available. If frame space is exhausted the terminations may need to be made at another frame. Upon completion of the pre-Provisioning provisioning of the Direct Connection, CLEC SBCT will receive an Alternate Point of Of Termination (APOT) form so that they may order Finished Services finished services and UNEs. CLEC SBCT will be responsible for augmenting terminations as required. The Direct Connection APOT information must be provided on the ASR or LSR to insure that the services are designed to the dedicated path.

Direct Connection. 8.3.1.11.2.1 Direct Connection provides an uninterrupted path from the Collocation space to an existing frame. This option will guarantee that there will not be an ICDF. The connection will be designed from the Collocation space to the same frame that Qwest uses to connect to that specific service. For example, if CLEC wants to connect directly from their Collocation space to a 911 router, the infrastructure for the 911 trunks will terminate in a DS1 bay location with the 911-router circuits. There are several options for the location of the Demarcation Pointdemarcation point. CLEC will select their desired option via the supplemental Direct Connection (DC-POT) With Collocation Form DC050900. If CLEC chooses a demarcation inside the Collocation space, the collocator should order and install the termination equipment itself. Demarcation equipment must be noted on the order form so that a CLLI code and unique tie cable assignments can be generated for systems flow through. If CLEC chooses a demarcation outside its Collocation space, Qwest will maintain and inventory this device. Direct terminations may be ordered where frame space is available. If frame space is exhausted the terminations may need to be made at another frame. Upon completion of the pre-Provisioning provisioning of the Direct Connection, CLEC will receive an Alternate Point of Of Termination (APOT) form so that they may order Finished Services finished services and UNEs. CLEC will be responsible for augmenting terminations as required. The Direct Connection APOT information must be provided on the ASR or LSR to insure that the services are designed to the dedicated path.. Qwest Version 3.6 Template Agreement, 03-16-2001 85 4/13/01/HAH for MS/360networks (USA) inc/NE/CDS-010411-0026