Construction Area. Contractor shall protect property and facilities adjacent to the construction area and all property and facilities within the construction area which are shown on the plans are to be protected. After project completion, the construction area shall be in a clean and presentable condition. All public or privately owned improvements and facilities shall be restored to their original condition and location. If improvements or facilities are damaged, they shall be replaced with new materials which are at least equal to the original materials. Nothing herein shall be construed to entitle the Contractor to the exclusive use of any public street, way, or parking area during performance of the Work. Contractor shall conduct its operations so as not to interfere with the authorized Work of utility companies or other agencies in such streets, ways or parking areas. The Contractor shall be responsible for investigating conditions of available public and private roads and of clearances, restrictions and other limitations affecting transportation and ingress and egress to the site of the Work. Use of equipment will be minimized during any Stage II or Stage III smog alerts. All equipment will meet emissions standards. Dust Control is required at all times. All proper public safety measures are to be used during construction, including barriers, flagmen and signing. Equipment must conform to all applicable noise regulations.
Construction Area. .1 Confine construction activities to as small an area as practical.
Construction Area. 28.1 The Contractor shall use areas approved by the City for deliveries and personnel, which may vary from time to time. Contract limits of construction area are indicated on the drawings. Equipment, material, and personnel shall be in conformance with this Contract.
Construction Area. The area where authorized construction on this Project occurs. Construction Limits (On-Site). The disturbed area utilized for the construction of a Project including the intersection of side slopes with the original ground plus slope rounding and slopes for Drainage Ditches, Bridges, Culverts, Channels, temporary or incidental construction, and identified by the surface planes as shown or described within the Contract Documents. Contract (also referred to as Contract Documents). The Agreement between the Department and Design-Builder for the Project, inclusive of all Contract Documents as defined in Article 2 of the Agreement. Oral representations or promises shall not be considered a part of the Contract. Contract Bond(s). Those documents defined in Section 103.05.
Construction Area. Federal Government OSHA standards require anyone on a construction site to wear certain protective clothing and safety devices, including, but not limited to, hard hats and safety glasses, and to the extent Builder permits Buyer on the Residence during construction, Buyer shall comply with such requirements. Neither Seller nor Builder nor any contractor shall have any responsibility or liability for any injury or loss resulting from or occurring during any entrance by Buyer or its guests or invitees on any construction area of the Residence, and Buyer shall indemnify Seller and any contractor from any and all loss, damages, claims, liability or responsibility resulting from any such entry by Buyer or its guests or invitees. Any communication regarding the construction of the Residence must be handled directly between Buyer and Seller, and Buyer shall not make any direct contact with any workmen, suppliers, superintendents or subcontractors of Builder or any contractor or their employees.
Construction Area. The area where authorized construction on this Project occurs. Construction Limits (On-Site). The disturbed area utilized for the construction of a Project including the intersection of side slopes with the original ground plus slope rounding and slopes for Drainage Ditches, Bridges, Culverts, Channels, temporary or incidental construction, and identified by the surface planes as shown or described within the Contract Documents.
Construction Area. 4.1 According to the actual demands with respect to the investment project, pursuant to the “Investment Intensity of Industrial Projects, etc.” of the state and Jiangsu Province as well as other relevant land management provisions, the Management Committee has agreed to provide approximate 75 Mu [1 Mu = 0.1647 acre] of land to be used for industrial construction in the Development Zone area coded B-9-3 for this project. See the figure attached for details.
Construction Area. Contractor shall protect property and facilities adjacent to the construction area and all property and facilities within the construction area which are shown on the plans are to be
Construction Area. The aforementioned Parcel 6708 in Plan-les-Ouates is located in an agricultural zone for industrial and artisanal development.
Construction Area. CONTRACTOR shall protect property and facilities adjacent to the construction area and all property and facilities within the construction area which are shown on the plans to be protected. After project completion, the construction area shall be in a clean and presentable condition. All public or privately owned improvements and facilities shall be restored to their original condition and location. If improvements or facilities are damaged, they shall be replaced with new materials which are at least equal to the original materials. Nothing herein shall be construed to entitle the CONTRACTOR to the exclusive use of any public street, way, or parking area during performance of the CONTRACT work. CONTRACTOR shall conduct its operations so as not to interfere with the authorized work of utility companies or other agencies in such streets, ways or parking areas.
